RADLAN-QOS-SERV
AI MIB Summary
The RADLAN-QOS-SERV MIB module enables monitoring and configuration of Quality of Service (QoS) service modes on RAD (Ruckus/Radware) networking hardware, specifically managing traffic classification, policing, and queuing parameters for service-level differentiation.
The MIB module describes the private MIB for QOS service mode.
Main OID:
rlQosServ.1.3.6.1.4.1.89.99
113
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
113 total| Object Name |
|---|
rlQosServThe MIB module describes the private MIB for QOS service mode. MODULE-IDENTITY .1.3.6.1.4.1.89.99 |
rlQosServTemplateTableThis table specifies classification template information.
Currently this table will contain exactly one entry. SEQUENCE OF RlQosServTemplateEntry .1.3.6.1.4.1.89.99.1 |
rlQosServTemplateEntryThe entry of this table describes all classifier fields.
The index is sequential integer represent by rlQosServTemplateEntry. RlQosServTemplateEntry .1.3.6.1.4.1.89.99.1.1 |
rlQosServTemplateIndexAn arbitrary index for the template table. INTEGER .1.3.6.1.4.1.89.99.1.1.1 |
rlQosServTemplateDestMacInclude the destination Mac field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.2 |
rlQosServTemplateDestMacMaskDestination Mac address mask. It may specify any byte (not bit),
within the Mac address, for classification, designated by 0.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.3 |
rlQosServTemplateSrcMacInclude the source Mac field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.4 |
rlQosServTemplateSrcMacMaskSource Mac address mask. It may specify any byte (not bit),
within the Mac address, for classification, designated by 0.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.5 |
rlQosServTemplateVlanInclude the Vlan field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.6 |
rlQosServTemplateDestIpInclude the destination Ip field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.7 |
rlQosServTemplateDestIpMaskDestination Ip address mask. It may specify any byte (not bit),
within the Ip address, for classification, designated by 0.rw IpAddress .1.3.6.1.4.1.89.99.1.1.8 |
rlQosServTemplateSrcIpInclude the source Ip field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.9 |
rlQosServTemplateSrcIpMaskSource Ip address mask. It may specify any byte (not bit),
within the Ip address, for classification, designated by 0.rw IpAddress .1.3.6.1.4.1.89.99.1.1.10 |
rlQosServTemplateIpProtocolInclude the Ip protocol field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.11 |
rlQosServTemplateSrcPortInclude the Tcp/Udp source port field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.12 |
rlQosServTemplateDestPortInclude the Tcp/Udp destination port field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.13 |
rlQosServTemplateTosInclude the Tos field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.14 |
rlQosServTemplateVptInclude the VPT field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.15 |
rlQosServTemplateEtherTypeInclude the Ether Type field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.16 |
rlQosServTemplateTcpFlagsInclude the Tcp flags (Control Bits) field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.17 |
rlQosServTemplateIcmpTypeInclude the Icmp type field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.18 |
rlQosServTemplateIcmpCodeInclude the Icmp code field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.19 |
rlQosServTemplateIgmpTypeInclude the Igmp type field as a template classifier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.99.1.1.20 |
rlQosServFclTableThis table specifies FCL table information SEQUENCE OF RlQosServFclEntry .1.3.6.1.4.1.89.99.2 |
rlQosServFclEntryEach entry in this table describes one Flow Classification List with
It's Flow Classification Element.
The information includes the FCL index and reference to a FCE index.
The indices are the Fcl index represent by rlQosServFclIndex and the
Fce index represent by rlQosServFclFceIndex. RlQosServFclEntry .1.3.6.1.4.1.89.99.2.1 |
rlQosServFclIndexAn arbitrary index for the FCL table. Value '0' is invalid. INTEGER .1.3.6.1.4.1.89.99.2.1.1 |
rlQosServFclFcePriorityPriority of the FCE within the FCL. INTEGER .1.3.6.1.4.1.89.99.2.1.2 |
rlQosServFclFceIndexA reference to the FCE index.rw INTEGER .1.3.6.1.4.1.89.99.2.1.3 |
rlQosServFclStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (RADLAN-SNMPv2) .1.3.6.1.4.1.89.99.2.1.4 |
rlQosServFceTableThis table specifies FCE table information SEQUENCE OF RlQosServFceEntry .1.3.6.1.4.1.89.99.3 |
rlQosServFceEntryEach entry in this table describes one Flow Classifier Element.
The information includes ACE index and a combination of all the other
classifications, as depicted in the selection field.
Classifiers are Mac and Ip source and destination addresses, Vlan,
Ip protocol, TCP & UDP source and destination ports, Dscp and Ip
precedence values.
The index is a sequential integer represent by rlQosServFceIndex. RlQosServFceEntry .1.3.6.1.4.1.89.99.3.1 |
rlQosServFceIndexAn arbitrary incremental Index for the Fce table. INTEGER .1.3.6.1.4.1.89.99.3.1.1 |
rlQosServFceErrorCodeFce error code.ro Enumeration .1.3.6.1.4.1.89.99.3.1.2 |
rlQosServFceSelectionFlow Classification Elements selection.rw Bits .1.3.6.1.4.1.89.99.3.1.3 |
rlQosServFceDestMacIndicates the destination Mac address to compare with.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.99.3.1.4 |
rlQosServFceDestMacMaskIndicates the destination Mac address mask to compare with.
It may specify any byte (not bit), designated by 0.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.99.3.1.5 |
rlQosServFceSrcMacIndicates the source Mac address to compare with.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.99.3.1.6 |
rlQosServFceSrcMacMaskIndicates the source Mac address mask to compare.
It may specify any byte (not bit), designated by 0.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.99.3.1.7 |
rlQosServFceVlanIndicates the Vlan to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.8 |
rlQosServFceVlanMaskIndicates 12-bits Vlan bits to compare.
It may specify any byte (not bit), designated by 0.rw INTEGER .1.3.6.1.4.1.89.99.3.1.9 |
rlQosServFceDestIpIndicates the destination Ip address to compare with.rw IpAddress .1.3.6.1.4.1.89.99.3.1.10 |
rlQosServFceDestIpMaskIndicates the destination Ip address mask to compare.
It may specify any byte (not bit), designated by 0.rw IpAddress .1.3.6.1.4.1.89.99.3.1.11 |
rlQosServFceSrcIpIndicates the source Ip address to compare with.rw IpAddress .1.3.6.1.4.1.89.99.3.1.12 |
rlQosServFceSrcIpMaskIndicates the source Ip address mask to compare.
It may specify any byte (not bit), designated by 0.rw IpAddress .1.3.6.1.4.1.89.99.3.1.13 |
rlQosServFceIpProtocolIndicates the Ip protocol to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.14 |
rlQosServFceDestPortIndicates the TCP/UDP destination port to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.15 |
rlQosServFceDestPortMaskIndicates 16-bits TCP/UDP destination port bits to compare.
It may specify any byte (not bit), designated by 0.rw INTEGER .1.3.6.1.4.1.89.99.3.1.16 |
rlQosServFceSrcPortIndicates the TCP/UDP source port to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.17 |
rlQosServFceSrcPortMaskIndicates 16-bits TCP/UDP source port bits to compare.
It may specify any byte (not bit), designated by 0.rw INTEGER .1.3.6.1.4.1.89.99.3.1.18 |
rlQosServFceDscpIndicates the Destination Mac address to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.19 |
rlQosServFceIpPrecedenceIndicates the Ip precedence to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.20 |
rlQosServFceVptIndicates the VPT to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.21 |
rlQosServFceVptMaskIndicates the VPT mask to compare with.
It may specify any bit, designated by 0.rw INTEGER .1.3.6.1.4.1.89.99.3.1.22 |
rlQosServFceEtherTypeIndicate the Ether Type to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.23 |
rlQosServFceTcpFlagsIndicates the Tcp Flags field to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.24 |
rlQosServFceTcpFlagsMaskIndicates the Tcp Flags field to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.25 |
rlQosServFceIcmpTypeIndicates the Icmp type to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.26 |
rlQosServFceIcmpCodeIndicates the Icmp code to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.27 |
rlQosServFceIgmpTypeIndicates the Igmp type to compare with.rw INTEGER .1.3.6.1.4.1.89.99.3.1.28 |
rlQosServFceStatusThe status of this table entry.
It is used to delete/Add an entry from this table.rw RowStatus (RADLAN-SNMPv2) .1.3.6.1.4.1.89.99.3.1.29 |
rlQosServProfileTableThis table specifies (service) profile table information SEQUENCE OF RlQosServProfileEntry .1.3.6.1.4.1.89.99.4 |
rlQosServProfileEntryEach entry in this table describes one service profile element.
The information includes: Profile name, type and various numeric
parameters associated with the profile's service types.
The index is sequential integer represent by rlQosServProfileIndex. RlQosServProfileEntry .1.3.6.1.4.1.89.99.4.1 |
rlQosServProfileIndexAn arbitrary index for the profile table. INTEGER .1.3.6.1.4.1.89.99.4.1.1 |
rlQosServProfileTypeProfile's typerw Enumeration .1.3.6.1.4.1.89.99.4.1.2 |
rlQosServProfileServiceTypeProfile's service type.rw Enumeration .1.3.6.1.4.1.89.99.4.1.3 |
rlQosServProfileIngressBurstSizeProfile's Ingress Burst Size, used only by the 'rate limit' service.rw Unsigned32 .1.3.6.1.4.1.89.99.4.1.4 |
rlQosServProfileMaxBandwidthProfile's Max Bandwidth, used by the 'min delay', committed delay'
'min max bandwidth' and committed Bound Bandwidth'services.
Value 0 is used only as default value, and is invalid otherwise.rw Unsigned32 .1.3.6.1.4.1.89.99.4.1.5 |
rlQosServProfileMinBandwidthProfile's Min Bandwidth, used only by the 'min max bandwidth'
service.
Value 0 is used only as default value, and is invalid otherwise.rw Unsigned32 .1.3.6.1.4.1.89.99.4.1.6 |
rlQosServProfileMaxDelayProfile's Max Delay, used only by the 'committed delay' service.
Value 0 is used only as default value, and is invalid otherwise.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.89.99.4.1.7 |
rlQosServProfileStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (RADLAN-SNMPv2) .1.3.6.1.4.1.89.99.4.1.8 |
rlQosServServiceTableThis table specifies service table information. SEQUENCE OF RlQosServServiceEntry .1.3.6.1.4.1.89.99.5 |
rlQosServServiceEntryEach entry in this table describes one service profile element.
The information includes: service's index, priority, pointers to
associated profile and Fcl, operational and administrative statuses,
ingress and egress interface lists, and two operational parameter
values associated with a service type, as defined in the profile table.
The index is sequential integer represent by rlQosServServiceIndex. RlQosServServiceEntry .1.3.6.1.4.1.89.99.5.1 |
rlQosServServiceIndexAn arbitrary index for the service table. INTEGER .1.3.6.1.4.1.89.99.5.1.1 |
rlQosServServicePriorityService's priority.rw Unsigned32 .1.3.6.1.4.1.89.99.5.1.2 |
rlQosServServiceProfilePointerPointer to attached profile entry.rw INTEGER .1.3.6.1.4.1.89.99.5.1.3 |
rlQosServServiceFclPointerPointer to attached FCL entry.rw INTEGER .1.3.6.1.4.1.89.99.5.1.4 |
rlQosServServiceInIfListIngress interface list associated with this service entry.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.99.5.1.5 |
rlQosServServiceOutIfListEgress interface list associated with this service entry.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.99.5.1.6 |
rlQosServServiceScaledOutIfListEgress scaled interface list associated with this service entry.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.99.5.1.7 |
rlQosServServiceProfileParamOperIf the service type specified in a profile associated with this entry
has a parameter, this object instance specifies the parameter's
operative value.
This value will be different from the value defined in the associated
profile only in case of scaling out, otherwise value 0 is used.ro Unsigned32 .1.3.6.1.4.1.89.99.5.1.8 |
rlQosServServiceStatusOperOperational value of the service status.ro RlQosServServiceStatus .1.3.6.1.4.1.89.99.5.1.9 |
rlQosServServiceStatusAdminAdministrative value of the service status.rw RlQosServServiceStatus .1.3.6.1.4.1.89.99.5.1.10 |
rlQosServServiceStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (RADLAN-SNMPv2) .1.3.6.1.4.1.89.99.5.1.11 |
rlQosServServicePriorityTableThis table specifies service priority table information. SEQUENCE OF RlQosServServicePriorityEntry .1.3.6.1.4.1.89.99.6 |
rlQosServServicePriorityEntryEach entry in this table maps a priority to a service.
The information includes: service's priority and the service index
in the service table.
The index is sequential integer represent by
rlQosServServicePriorityIndex. RlQosServServicePriorityEntry .1.3.6.1.4.1.89.99.6.1 |
rlQosServServicePriorityIndexThe service priority. INTEGER .1.3.6.1.4.1.89.99.6.1.1 |
rlQosServServicePriorityPointerThe index of the service associated with this priority in the service
table.ro INTEGER .1.3.6.1.4.1.89.99.6.1.2 |
rlQosServServiceDefaultMappingTableThis table specifies service priority table information. SEQUENCE OF RlQosServServiceDefaultMappingEntry .1.3.6.1.4.1.89.99.7 |
rlQosServServiceDefaultMappingEntryEach entry in this table describes one service priority entry.
The information includes: service's priority, a pointer to its
corresponding index in the service table.
The index is sequential integer represent by
rlQosServServicePriorityIndex. RlQosServServiceDefaultMappingEntry .1.3.6.1.4.1.89.99.7.1 |
rlQosServServiceDefaultMappingTypeService type for the default mapping.
'Trust DSCP' service type is absent since no default mapping
is possible for it. Enumeration .1.3.6.1.4.1.89.99.7.1.1 |
rlQosServServiceDefaultMappingDscpDSCP default mapping value.
A value of 64 means no DSCP default mapping is done.rw INTEGER .1.3.6.1.4.1.89.99.7.1.2 |
rlQosServServiceDefaultMappingVptVpt default mapping value.
A value of 9 means no VPT default mapping is done.rw INTEGER .1.3.6.1.4.1.89.99.7.1.3 |
rlQosServScalingErrorTableThis table specifies scaling error table SEQUENCE OF RlQosServScalingErrorEntry .1.3.6.1.4.1.89.99.8 |
rlQosServScalingErrorEntryEach entry in this table specifies for each interface its scaling
error, if such indeed exists. RlQosServScalingErrorEntry .1.3.6.1.4.1.89.99.8.1 |
rlQosServScalingErrorIfIndexThe interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.99.8.1.1 |
rlQosServScalingErrorReasonScaling error reason.ro Enumeration .1.3.6.1.4.1.89.99.8.1.2 |
rlQosServFreeSequentialTableThe table is used to get free indices of tables to create
new entries, and next free priorities.
The algorithm for free indexes depends on table types:
Fcl table - first free index.
Fce table - first free index.
Service table - first free index.
Service priority - last used priority + priority-delta.
The priority-delta is used to supply QoS MIB user easy new priority
insert entry capabilities.
Values of these deltas depend on the MIB implementation.
The 'Get and Increment' approach is used in all cases. SEQUENCE OF RlQosServFreeSequentialEntry .1.3.6.1.4.1.89.99.9 |
rlQosServFreeSequentialEntryThe entry is used to get free index for particular table. RlQosServFreeSequentialEntry .1.3.6.1.4.1.89.99.9.1 |
rlQosServFreeSequentialIdIdentification of the sequential, for which free indices or priority
are retrieved. Enumeration .1.3.6.1.4.1.89.99.9.1.1 |
rlQosServFreeSequentialValueThe free index for the table or service priority.
Returned '0' means no free entries/priority.ro INTEGER .1.3.6.1.4.1.89.99.9.1.2 |
rlQosServNameToIndexTableThe table is used to get specific table(s) indices from the name. SEQUENCE OF RlQosServNameToIndexEntry .1.3.6.1.4.1.89.99.10 |
rlQosServNameToIndexEntryThe entry is used to get index form particular name and table type. RlQosServNameToIndexEntry .1.3.6.1.4.1.89.99.10.1 |
rlQosServNameToIndexTableIdIdentification of the table, for which the index is retrieved. RlQosServNamedTableId .1.3.6.1.4.1.89.99.10.1.1 |
rlQosServNameToIndexNameName of the table's entry DisplayString .1.3.6.1.4.1.89.99.10.1.2 |
rlQosServNameToIndexValueThe index of the table. Value '0' is invalid.rw INTEGER .1.3.6.1.4.1.89.99.10.1.3 |
rlQosServNameToIndexStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (RADLAN-SNMPv2) .1.3.6.1.4.1.89.99.10.1.4 |
rlQosServIndexToNameTableThe table is used to get specific table(s) name from indices.
It is a read-write table for internal (CDB) purpose only and is not to
set by outside users. SEQUENCE OF RlQosServIndexToNameEntry .1.3.6.1.4.1.89.99.11 |
rlQosServIndexToNameEntryThe entry is used to get name form particular index and table type. RlQosServIndexToNameEntry .1.3.6.1.4.1.89.99.11.1 |
rlQosServIndexToNameTableIdIdentification of the table, for which the name is retrieved. RlQosServNamedTableId .1.3.6.1.4.1.89.99.11.1.1 |
rlQosServIndexToNameIndexThe index of the table. Value '0' is invalid. INTEGER .1.3.6.1.4.1.89.99.11.1.2 |
rlQosServIndexToNameValueName of the table's entryrw DisplayString .1.3.6.1.4.1.89.99.11.1.3 |
rlQosServMibVersionMIB's version, the current version is 1.
1 - original version.
2-ro INTEGER .1.3.6.1.4.1.89.99.12 |
rlQosServMibActionActions to be performed by QoS service mode MIB.rw Enumeration .1.3.6.1.4.1.89.99.13 |