RADLAN-QCN-MIB
The RADLAN-QCN-MIB module enables monitoring and configuration of IEEE 802.1Qcn Quantized Congestion Notification (QCN) features on RADLAN network devices, specifically tracking priority-based flow control states, interface congestion status, and feedback control parameters such as set points and weighting factors.
Imported Objects
Objects
20 total| Object Name |
|---|
rlQcnMibAdded:
rlQcnFeatureStatus
rlQcnPriorityStateTable
rlQcnIfStateTable
rlQcnCmnPriority
rlQcnCpPfcSetPoint
rlQcnCpNonPfcSetPoint
rlQcnCpFeedbackWeight
rlQcnCpMinSampleBase. MODULE-IDENTITY .1.3.6.1.4.1.89.202 |
rlQcnFeatureStatusThis scalar indicates QCN enable status.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.202.1 |
rlQcnPriorityStateTableThis table describes Quantized Congestion Notification per Priority state. SEQUENCE OF RlQcnPriorityStateEntry .1.3.6.1.4.1.89.202.2 |
rlQcnPriorityStateEntryEach entry in this table describes priority state.
The index is represented by rlQcnPriorityStatePriority. RlQcnPriorityStateEntry .1.3.6.1.4.1.89.202.2.1 |
rlQcnPriorityStatePriority802.1Q Priority. INTEGER .1.3.6.1.4.1.89.202.2.1.1 |
rlQcnPriorityAdminStateEnableAdmin status of this priority.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.202.2.1.2 |
rlQcnPriorityOperStateEnableOperational status of this priority.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.202.2.1.3 |
rlQcnPriorityAdminStateReasonReason for admin status (if admin status not equal to oper).ro Enumeration .1.3.6.1.4.1.89.202.2.1.4 |
rlQcnPriorityStateStatusThe status of a table entry.
It is used to delete/Add an entry from/to this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.202.2.1.5 |
rlQcnIfStateTableThis table describes Quantized Congestion Notification per interface state. SEQUENCE OF RlQcnIfStateEntry .1.3.6.1.4.1.89.202.3 |
rlQcnIfStateEntryEach entry in this table describes state of the interface.
The index is represented by rlQcnIfStateIfIndex. RlQcnIfStateEntry .1.3.6.1.4.1.89.202.3.1 |
rlQcnIfStateIfIndexIfIndex. INTEGER .1.3.6.1.4.1.89.202.3.1.1 |
rlQcnIfStateCpCreationEnCongestion point creation enable status.
If CP creation is enabled for an interface,
the system automatically creates a
Congestion Point (CP) for a queue of that
interface if at least one QCN priority
(Oper state) is mapped to that queue.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.202.3.1.2 |
rlQcnIfStateStatusThe status of a table entry.
It is used to delete/Add an entry from/to this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.202.3.1.3 |
rlQcnCmnPriorityThis scalar indicates priority which is used for all
Congestion Notification Messages (CNMs) transmitted by the device.rw INTEGER .1.3.6.1.4.1.89.202.4 |
rlQcnCpPfcSetPointThis scalar indicates QCN set-point of an
egress queue on PFC enabled interface.
Value of set-point is in bytes and in multiples of 512.rwobsolete INTEGER .1.3.6.1.4.1.89.202.5 |
rlQcnCpNonPfcSetPointThis scalar indicates QCN set-point of an
egress queue on PFC disabled interface.
Value of set-point is in bytes and in multiples of 512.rwobsolete INTEGER .1.3.6.1.4.1.89.202.6 |
rlQcnCpFeedbackWeightThis scalar indicates Feedback Weight of a QCN egress queue.
The weight is equal to two to the power of this object.
Thus, if this number contains a -1, weight = 1/2.rw INTEGER ( -10..10 ) .1.3.6.1.4.1.89.202.7 |
rlQcnCpMinSampleBaseThis scalar indicates minimum number of bytes to
enqueue in a QCN egress queue between transmissions
of Congestion Notification Messages.
Value of min-sample-base is in bytes and in multiples of 16.rw INTEGER .1.3.6.1.4.1.89.202.8 |
rlQcnCpSetPointThis scalar indicates QCN set-point of an egress queue.
Value of set-point is in bytes and in multiples of 512.rw INTEGER .1.3.6.1.4.1.89.202.9 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.