RADLAN-PIM-BSR-MIB
Standard SNMP MIB module defining data structures for RADLAN-PIM-BSR-MIB.
Imported Objects
Objects
11 total| Object Name |
|---|
rlPimBsrCandidateRPTableThe (conceptual) table listing the IP multicast group
prefixes for which the local router is to advertise
itself as a Candidate-RP. SEQUENCE OF RlPimBsrCandidateRPEntry .1.3.6.1.4.1.89.220 |
rlPimBsrCandidateRPEntryAn entry (conceptual row) in the
rlPimBsrCandidateRPTable. RlPimBsrCandidateRPEntry .1.3.6.1.4.1.89.220.1 |
rlPimBsrCandidateRPAddressTypeThe Inet address type of the Candidate-RP. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.220.1.1 |
rlPimBsrCandidateRPAddressThe (unicast) address that will be advertised as a
Candidate-RP. The InetAddressType is given by the
rlPimBsrCandidateRPAddressType object.
If this is not an address on the local router,
DC-PIM will not advertise it as an C-RP address. InetAddress .1.3.6.1.4.1.89.220.1.2 |
rlPimBsrCandidateRPGroupPrefixListIdentifies a standard access list containing the
set of IP multicast group prefixes for which the
local router will advertise itself as a Candidate-RP
with the given RP address.
If there is any rule in the list with
aallStdAccessListIncluded set to 'false',
DC-PIM does not advertise this RP address as a
Candidate-RP. Otherwise DC-PIM advertises the
RP address as a Candidate-RP for every IP multicast
group prefix corresponding to a rule in the access list
with row status 'active' and admin status 'up'.
rlPimBsrCandidateRPGroupPrefixList defaults to an empty string, which
indicates that no access list has yet been specified.
rlPimBsrCandidateRPStatus can only be set to 'active' if a
non-empty string has been specified for
rlPimBsrCandidateRPGroupPrefixList.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.220.1.3 |
rlPimBsrCandidateRPBidirIf this object is set to TRUE, this group range is
advertised with this RP as a BIDIR-PIM group range. If
it is set to FALSE, it is advertised as a PIM-SM group
range.
DC-PIM only supports the value FALSE for this object.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.220.1.5 |
rlPimBsrCandidateRPAdvTimerThe time remaining before the local router next sends
a Candidate-RP-Advertisement to the elected BSR.
This will be zero if the C-RP is shutting down or any of
the following conditions are true:
- the entity is not active
- the row is inactive
- the group prefix list is invalid
- the configured C-RP address is not local.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.220.1.6 |
rlPimBsrCandidateRPPriorityThe priority for this Candidate RP advertised in
Candidate-RP-Advertisements. Numerically higher values
for this object indicate lower priorities, with the value
zero denoting the highest priority.rw Unsigned32 .1.3.6.1.4.1.89.220.1.7 |
rlPimBsrCandidateRPAdvIntervalA Candidate RP generates Candidate-RP-Advertisements
periodically. This object represents the time interval
in seconds between two consecutive advertisements.rw Unsigned32 .1.3.6.1.4.1.89.220.1.8 |
rlPimBsrCandidateRPHoldtimeHoldtime for this Candidate RP. The amount of time (in
seconds) this Candidate-RP entry is valid.rw Unsigned32 .1.3.6.1.4.1.89.220.1.9 |
rlPimBsrCandidateRPStatusThe status of this row, by which new entries may be
created, or old entries deleted from this table.
All writable objects in this entry can be modified
when the status of this entry is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.220.1.10 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.