QOS-BRIDGE-MIB
Imported Objects
Objects
13 total| Object Name |
|---|
dot1dQosMibThis MIB defines the additional objects necessary to manage the
Quality-of-Service aspects of a bridge device that uses the
IETF's Differentiated Services Architecture described in RFC 2475
and the Conceptual Model for DiffServ Routers in draft-ietf-
diffserv-model-03.txt. It is to be used in conjunction with the
Diffserv MIB described in draft-ietf-diffserv-mib-03.txt. MODULE-IDENTITY .1.3.6.1.4.1.3727.20.20.3.1.12346 |
IMPORTSThis MIB defines the additional objects necessary to manage the
Quality-of-Service aspects of a bridge device that uses the
IETF's Differentiated Services Architecture described in RFC 2475
and the Conceptual Model for DiffServ Routers in draft-ietf-
diffserv-model-03.txt. It is to be used in conjunction with the
Diffserv MIB described in draft-ietf-diffserv-mib-03.txt. Unknown .1.3.6.1.4.1.3727.20.20.3.1.12346 |
dot1dQosObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.12346.1 |
dot1dQosTables OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.12346.2 |
dot1dQosUserPriTableA table of user_priority entries that each signifies a traffic
class in 802.1D bridges. All entries exist in this table at all
times. Its entries may be used as destinations for
diffServClassifierFilter pointers for traffic classification
purposes and for diffServActionSpecific pointers for traffic
marking purposes. SEQUENCE OF Dot1dQosUserPriEntry .1.3.6.1.4.1.3727.20.20.3.1.12346.2.1 |
dot1dQosUserPriEntryAn entry that describes a single 802.1D user_priority filter. Dot1dQosUserPriEntry .1.3.6.1.4.1.3727.20.20.3.1.12346.2.1.1 |
dot1dQosUserPriA user_priority value for the filter. Filters may be shared by
multiple interfaces in the same system.ro Dot1dUserPri .1.3.6.1.4.1.3727.20.20.3.1.12346.2.1.1.1 |
dot1dQosVlanClfrTableA table of VLAN entries for use in QoS classification in
bridges. Its entries may be used as destinations for
diffServClassifierFilter pointers for traffic classification
purposes. SEQUENCE OF Dot1dQosVlanClfrEntry .1.3.6.1.4.1.3727.20.20.3.1.12346.2.2 |
dot1dQosVlanClfrEntryAn entry that describes a classifier element for a single 802.1Q
VLAN. Dot1dQosVlanClfrEntry .1.3.6.1.4.1.3727.20.20.3.1.12346.2.2.1 |
dot1dQosVlanStatusThe RowStatus variable controls the activation, deactivation, or
deletion of a filter for a VLAN for use in QoS classification.
Note that, even though this table is indexed by dot1qVlanIndex,
this does not imply that there must be an equivalent entry in
either dot1qVlanCurrentTable or dot1qVlanStaticTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3727.20.20.3.1.12346.2.2.1.1 |
dot1dQosMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.12346.3 |
dot1dQosMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.12346.3.1 |
dot1dQosMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.12346.3.2 |
More MIBs from Pseudowire Edge-to-Edge Emulation (PWE3)
Browse all Pseudowire Edge-to-Edge Emulation (PWE3)MIBs →The SUPERCAPBATTERY-MIB module provides SNMP objects to monitor the voltage, current, temperature, and remaining capacity of supercapacitor-based backup power units and their associated battery management systems on networked infrastructure. It enables administrators to track charge levels and health status of these energy storage components to prevent unexpected device shutdowns during power failures.
The VSL2-LINE-MIB module provides a unified management framework for monitoring VDSL2, ADSL, ADSL2, and ADSL2+ physical line interfaces, exposing standardized counters and status objects defined by ITU-T G.99x series and DSL Forum TR-129 specifications. It facilitates the collection of critical performance metrics such as line attenuation, signal-to-noise ratio, and error counts (FEC/HEC) across these copper-based broadband technologies via the SNMP MIB-2 transmission hierarchy.
SNMP MIB module
SNMP MIB module
The OSPFV3-MIB provides SNMP-based monitoring and management of OSPFv3 routing processes, exposing key metrics such as neighbor adjacency states, interface link-local addresses, LSDB synchronization status, and SPF calculation statistics for IPv6 networks.
SNMP MIB module