PRVT-SWITCH-EFM-OAM-MIB
AI MIB Summary
The PRVT-SWITCH-EFM-OAM-MIB extends standard IEEE 802.3ah EFM OAM capabilities on Ethernet switches by exposing vendor-specific configuration parameters, including protocol enablement states and timer thresholds, alongside proprietary extension controls not defined in the DOT3-OAM-MIB.
This MIB should provide general configuration and reports of this protocol that are not available in the standard DOT3-OAM-MIB, such as Enabling and Timers, as well as the ability to control private extensions added to the EFM OAM.
Main OID:
prvtSwitchEfmOamMIB.1.3.6.1.4.1.5205.2.133
67
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
67 total| Object Name |
|---|
prvtSwitchEfmOamMIBThis MIB should provide general configuration and
reports of this protocol that are not available in
the standard DOT3-OAM-MIB, such as Enabling and Timers,
as well as the ability to control private
extensions added to the EFM OAM. MODULE-IDENTITY .1.3.6.1.4.1.5205.2.133 |
prvtEfmOamNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.133.0 |
prvtOamLoopBackStateThis trap should be sent whenever the loopback
state has been change from Remote, when dot3OamMode
is passive or dot3OamAdminState is disable the
interface cannot be on remoteLoopback state
and should send this trap. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.133.0.1 |
prvtOamDyingGaspThe notification alarms for a failure due to loss of local power
('Dying Gasp') NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.133.0.2 |
prvtEfmOamObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.133.1 |
prvtEfmOamEnableEnable/disable the EFM OAM on the devicerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5205.2.133.1.1 |
prvtEfmOamMultiPduCountNumber of OAM PDUs that will be sent when
protocol ask to send multiple subsequent
messages.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.2 |
prvtEfmOamRemoteEventEnable or disable sending the local
event notifications to the remote device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5205.2.133.1.3 |
prvtEfmOamLocalSysLogDisable/enable sending of Event Notification
OAM PDU to the local Syslog daemon.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5205.2.133.1.4 |
prvtEfmOamPriorityPriority of the sent OAM PDUs.
Please note that value 8 represents no-priority.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.5 |
prvtEfmOamKeepAliveAging interval (in miliseconds)of the last heard
neighbouring device.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.6 |
prvtEfmOamHelloIntervalMaximal interval between a pair of PDUs in milliseconds.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.7 |
prvtEfmOamPktsSentSent packets.ro Unsigned32 .1.3.6.1.4.1.5205.2.133.1.8 |
prvtEfmOamPktsReceivedReceived packets.ro Unsigned32 .1.3.6.1.4.1.5205.2.133.1.9 |
prvtEfmOamTableThis table shall containg an entry per
physical interface, indexed by the corresponding
ifIndex from IF-MIB and each row in the
table shall contain a single column. SEQUENCE OF PrvtEfmOamEntry .1.3.6.1.4.1.5205.2.133.1.10 |
prvtEfmOamEntryEFM Entry PrvtEfmOamEntry .1.3.6.1.4.1.5205.2.133.1.10.1 |
prvtEfmOamEnhanceModeUsed to be used to enable or disable EFM-OAM
Vendor specific extensions on the
specific interface. Values are :
- basic(1) - no Vendor specific OAM
extensions are used.
- enhance(2) - when the remote device is detected
as Vendor device, enhanced mode is used.rw Enumeration .1.3.6.1.4.1.5205.2.133.1.10.1.1 |
prvtEfmOamEventReturn0 - feature is disabled (default value)
1-10 - feature is enabled. The number
specifies how many handshaking attempts
will be done before shutting down the port.rw Integer32 (0 | 1..10) .1.3.6.1.4.1.5205.2.133.1.10.1.2 |
prvtEfmOamForceLoopbackLocalUsed to force permanent loopback configuration
on the local side.
This is used for loopback traffic
analysis for long term (for example,
24 hours length infrastructure testing).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5205.2.133.1.10.1.3 |
prvtEfmOamForceLoopbackRemoteUsed to force permanent loopback configuration
on the remote side.
This is used for loopback traffic
analysis for long term (for example,
24 hours length infrastructure testing).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5205.2.133.1.10.1.4 |
prvtEfmOamEventForwardStatusForward a Link EventNotification on the specified target
interface. Note that the interface which will
forward the EventNotification must have efm-oam mode enabled.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5205.2.133.1.10.1.5 |
prvtEfmOamEventForwardShutdownShutdown a specified target interface as a
result of the current interface status change.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5205.2.133.1.10.1.6 |
prvtEfmOamPing OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.133.1.11 |
prvtEfmOamPingTableThis table let the EFM-OAM non-intrusive monitoring
on the specific interface by querying a number
of time aFramesTransmittedOK parameter, ping requests,
using the variable retrieval EFM OAM PDU. SEQUENCE OF PrvtEfmOamPingEntry .1.3.6.1.4.1.5205.2.133.1.11.1 |
prvtEfmOamPingEntry PrvtEfmOamPingEntry .1.3.6.1.4.1.5205.2.133.1.11.1.1 |
prvtEfmOamPingEchoNumberThe number of echo packets to send.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.11.1.1.1 |
prvtEfmOamPingDelayTimeThe delay in seconds between packets.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.11.1.1.2 |
prvtEfmOamPingTimeOutThe time in seconds which the ping
should wait for the response.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.11.1.1.3 |
prvtEfmOamPingCounterBranchSet/get the counter of ping-like operation.rw Enumeration .1.3.6.1.4.1.5205.2.133.1.11.1.1.4 |
prvtEfmOamPingCounterLeafSet/get the counter of ping-like operation.rw Enumeration .1.3.6.1.4.1.5205.2.133.1.11.1.1.5 |
prvtEfmOamPingRowStatusCreation/delete/edit of the ping test.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5205.2.133.1.11.1.1.6 |
prvtEfmOamPingResultTablePing results. SEQUENCE OF PrvtEfmOamPingResultEntry .1.3.6.1.4.1.5205.2.133.1.11.2 |
prvtEfmOamPingResultEntry PrvtEfmOamPingResultEntry .1.3.6.1.4.1.5205.2.133.1.11.2.1 |
prvtEfmOamPingResultStatusCurrent ping operation status.ro Enumeration .1.3.6.1.4.1.5205.2.133.1.11.2.1.1 |
prvtEfmOamPingResultSentPacketsSent packetsro Counter32 .1.3.6.1.4.1.5205.2.133.1.11.2.1.2 |
prvtEfmOamPingResultReceivedPacketsReceived packetsro Counter32 .1.3.6.1.4.1.5205.2.133.1.11.2.1.3 |
prvtEfmOamPingResultRcvRateIntegerPing receive rate - Integer partro Unsigned32 .1.3.6.1.4.1.5205.2.133.1.11.2.1.4 |
prvtEfmOamPingResultRcvRateFractionalPing receive rate - Fractional partro Unsigned32 .1.3.6.1.4.1.5205.2.133.1.11.2.1.5 |
prvtEfmOamPingResultTimeMinPing minimum time.ro Unsigned32 .1.3.6.1.4.1.5205.2.133.1.11.2.1.6 |
prvtEfmOamPingResultTimeMaxPing maximum time.ro Unsigned32 .1.3.6.1.4.1.5205.2.133.1.11.2.1.7 |
prvtEfmOamPingResultAverageTimeIntegerPing average time - Integer part.ro Unsigned32 .1.3.6.1.4.1.5205.2.133.1.11.2.1.8 |
prvtEfmOamPingResultAverageTimeFractionalPing average time - Fractional part.ro Unsigned32 .1.3.6.1.4.1.5205.2.133.1.11.2.1.9 |
prvtEfmOamPingResultClearDeleteper interface entries in prvtEfmOamPingResultTable.rw Enumeration .1.3.6.1.4.1.5205.2.133.1.11.2.1.10 |
prvtEfmOamLoopback OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.133.1.12 |
prvtEfmOamLoopbackTableThis table should permit to perform EFM-OAM
intrusive monitoring on the specific interface
by setting the remote device into loopback state
and generating test traffic.
It should support:
Storm operation, an operation that sets
remote loopback, stops local data flow to the
remote box and generates a packet burst by CPU.
When the burst is received back it is validated
and statistics are displayed. Burst operation,
an operation that sets remote loopback, stops
local data flow to the remote box and generates
a packet test burst by the hardware (when available).
It means a single packet generated by CPU is
repetitively sent by the hardware. When the
burst is received back it is ignored and only
counters are displayed. SEQUENCE OF PrvtEfmOamLoopbackEntry .1.3.6.1.4.1.5205.2.133.1.12.1 |
prvtEfmOamLoopbackEntry PrvtEfmOamLoopbackEntry .1.3.6.1.4.1.5205.2.133.1.12.1.1 |
prvtEfmOamLoopbackOperationRepresent the operation that the
should be performed on the interface.rw Enumeration .1.3.6.1.4.1.5205.2.133.1.12.1.1.1 |
prvtEfmOamLoopbackDurationRepresent the amount of time burst test should run in seconds.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.12.1.1.2 |
prvtEfmOamLoopbackCountRepresent the count of packets to send in storm operation.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.12.1.1.3 |
prvtEfmOamLoopbackPacketSizeRepresent the size of the test packet to use.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.12.1.1.4 |
prvtEfmOamLoopbackDelayRepresent the delay between packets in seconds.
The default value is 0 and represents no delay.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.12.1.1.5 |
prvtEfmOamLoopbackTimeoutRepresent the wait for response in seconds.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.12.1.1.6 |
prvtEfmOamLoopbackNoRemoteAdd or not remote to loopback.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5205.2.133.1.12.1.1.7 |
prvtEfmOamLoopbackRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5205.2.133.1.12.1.1.8 |
prvtEfmOamLoopbackResultTableLoopback results. SEQUENCE OF PrvtEfmOamLoopbackResultEntry .1.3.6.1.4.1.5205.2.133.1.12.2 |
prvtEfmOamLoopbackResultEntry PrvtEfmOamLoopbackResultEntry .1.3.6.1.4.1.5205.2.133.1.12.2.1 |
prvtEfmOamLoopbackResultStatusLoopback result statusro Enumeration .1.3.6.1.4.1.5205.2.133.1.12.2.1.1 |
prvtEfmOamLoopbackResultFloodFlood valuero INTEGER .1.3.6.1.4.1.5205.2.133.1.12.2.1.2 |
prvtEfmOamLoopbackResultSentPacketsSent packetsro Counter32 .1.3.6.1.4.1.5205.2.133.1.12.2.1.3 |
prvtEfmOamLoopbackResultReceivedPacketsReceived packetsro Counter32 .1.3.6.1.4.1.5205.2.133.1.12.2.1.4 |
prvtEfmOamLoopbackResultClearDelete per interface entries in prvtEfmOamLoopbackResultTable.rw Enumeration .1.3.6.1.4.1.5205.2.133.1.12.2.1.5 |
prvtEfmOamPeerTableThis table holds the peer extended information
available only when local interface is set in
enhanced mode (see prvtOamEnhanceMode) and the
remote is detected as enhanced-mode device. This table
shall containg an entry per physical interface,
indexed by the corresponding ifIndex from IF-MIB. SEQUENCE OF PrvtEfmOamPeerEntry .1.3.6.1.4.1.5205.2.133.1.13 |
prvtEfmOamPeerEntry PrvtEfmOamPeerEntry .1.3.6.1.4.1.5205.2.133.1.13.1 |
prvtEfmOamPeerPortHolds the peer port name as string
as it is sent by the peer (eg: 1/2/1).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.133.1.13.1.1 |
prvtEfmOamPeerNameHolds the peer hostname s string
as it is sent by the peer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.133.1.13.1.2 |
prvtEfmOamHistorySizeNumber of entries in EFM_OAM history.rw Unsigned32 .1.3.6.1.4.1.5205.2.133.1.14 |
prvtEfmOamConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.133.2 |