PRIVATE-SW0657840-MIB
AI MIB Summary
The PRIVATE-SW0657840-MIB module provides vendor-specific extensions for xxx Tech network switches, enabling the monitoring of proprietary hardware telemetry, internal interface states, and device-specific performance counters not covered by standard MIBs. This module facilitates granular fault isolation and resource utilization tracking for xxx Tech switch platforms via SNMP.
The MIB module is for xxx Tech.
Main OID:
privatetech.1.3.6.1.4.1.5205
216
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
216 total| Object Name |
|---|
privatetechThe MIB module is for xxx Tech. MODULE-IDENTITY .1.3.6.1.4.1.5205 |
switch OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2 |
sw0657840ProductID OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9 |
sw0657840Produces OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1 |
sw0657840System OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.1 |
sw0657840CommonSys OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.1.1 |
sw0657840RebootReboot the system. Get this OID always return zero.
0 - do nothing
1 - Reboot without saving start
2 - Reboot with saving startrw INTEGER(0|1|2) .1.3.6.1.4.1.5205.2.9.1.1.1.1 |
sw0657840BiosVsersionGet the BIOS version of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.1.2 |
sw0657840FirmwareVersionGet the firmware version of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.1.3 |
sw0657840HardwareVersionGet the hardware version of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.1.4 |
sw0657840MechanicalVersionGet the mechanical version of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.1.5 |
sw0657840SerialNumberGet the Serial number of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.1.6 |
sw0657840HostMacAddressGet the MAC address of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.1.7 |
sw0657840DevicePortGet the quantity of ports that this system owns now.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.1.8 |
sw0657840RamSizeGet the RAM size of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.1.9 |
sw0657840FlashSizeGet the flash size of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.1.10 |
sw0657840IP OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.1.2 |
sw0657840DhcpSettingGet/Set DHCP status of the system.
0 - DHCP disable
1 - DHCP enablerw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.1.2.1 |
sw0657840IPAddressGet/Set the IP address of the system.
You can't set this OID if DHCP status is enabled.rw IpAddress .1.3.6.1.4.1.5205.2.9.1.1.2.2 |
sw0657840NetMaskGet/Set the subnet mask of the system.
You can't set this OID if DHCP status is enabled.rw IpAddress .1.3.6.1.4.1.5205.2.9.1.1.2.3 |
sw0657840DefaultGatewayGet/Set the default gateway of the system.
You can't set this OID if DHCP status is enabled.rw IpAddress .1.3.6.1.4.1.5205.2.9.1.1.2.4 |
sw0657840DnsSettingGet/Set the source of DNS server.
You can't set this OID if DHCP status is disabled.
0 - manual, the DNS server is from manual setting
1 - auto, the DNS server is assigned by DHCP server.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.1.2.5 |
sw0657840DnsServerGet/Set the DNS server of the system.rw IpAddress .1.3.6.1.4.1.5205.2.9.1.1.2.6 |
sw0657840Time OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.1.3 |
sw0657840SystemCurrentTimeGet the current time of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.3.1 |
sw0657840ManualTimeSettingGet/Set the system time of the device.
The input format is 'Year/Month/Day/Hour/Minute/Second'.
ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 .
The value range:
Year : 2000 - 2036,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59,
Sec : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.3.2 |
sw0657840NTPServerGet/Set the NTP Time Server. You can use the IP address or domain name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.3.3 |
sw0657840NTPTimeZoneGet/Set the NTP Time Zone.
The value range is between -12 and 13
-12 - GMT -12:00,
-11 - GMT -11:00,
-10 - GMT -10:00,
-9 - GMT -09:00,
-8 - GMT -08:00,
-7 - GMT -07:00,
-6 - GMT -06:00,
-5 - GMT -05:00,
-4 - GMT -04:00,
-3 - GMT -03:00,
-2 - GMT -02:00,
-1 - GMT -01:00,
0 - GMT +00:00,
1 - GMT +01:00,
2 - GMT +02:00,
3 - GMT +03:00,
4 - GMT +04:00,
5 - GMT +05:00,
6 - GMT +06:00,
7 - GMT +07:00,
8 - GMT +08:00,
9 - GMT +09:00,
10 - GMT +10:00,
11 - GMT +11:00,
12 - GMT +12:00,
13 - GMT +13:00.rw INTEGER(-12..13) .1.3.6.1.4.1.5205.2.9.1.1.3.4 |
sw0657840NTPTimeSyncSync time from NTP Server. Get this OID always return zero.
Set the Time Server and Time Zone before doing time sync.
Notice that time server must be correct!
The value range (0|1):
1 - sync.
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.1.3.5 |
sw0657840DaylightSavingTimeGet/Set the daylight saving time.
The value range is between -5 and 5. (Unit: hour)rw INTEGER(-5..5) .1.3.6.1.4.1.5205.2.9.1.1.3.6 |
sw0657840DaylightStartTimeGet/Set the Start time of Daylight Saving.
The input format is 'MM/DD/HH',
and daylight saving start month can't equal end month.
example: month/day/hour 10/01/00
month: 01~12, day: 01~31, hour: 00~23 .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.3.7 |
sw0657840DaylightEndTimeGet/Set the End time of Daylight Saving.
The input format is 'MM/DD/HH',
and daylight saving start month can't equal end month.
example: month/day/hour 04/01/00
month: 01~12, day: 01~31, hour: 00~23 .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.3.8 |
sw0657840Account OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.1.4 |
sw0657840AccountNumberGet the current account number(s) of the system.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.1.4.1 |
sw0657840AccountTableThis is a list of SW0657840AccountEntry. The numbers of entries are given by
the value of sw0657840AccountNumber. SEQUENCE OF SW0657840AccountEntry .1.3.6.1.4.1.5205.2.9.1.1.4.2 |
sw0657840AccountEntryThis is the Entry(s) for account information. SW0657840AccountEntry .1.3.6.1.4.1.5205.2.9.1.1.4.2.1 |
sw0657840AccountIndexThis is the index of the account entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.1.4.2.1.1 |
sw0657840AccountAuthorizationThis is the authorization of the account entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.4.2.1.2 |
sw0657840AccountNameThis is the username of the account entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.4.2.1.3 |
sw0657840AccountPasswordThis is the password of the account entry. The return value is always '********'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.4.2.1.4 |
sw0657840AccountAddNameThis is the account name for adding operation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.4.3 |
sw0657840AccountAddPasswordThis is the account password for adding operation. The return value is always '********'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.1.4.4 |
sw0657840DoAccountAddAdd account name. OID sw0657840AccountAddName and sw0657840AccountAddPassword must be
filled first. Get this OID always return zero.
1 - add account.
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.1.4.5 |
sw0657840AccountDelDelete account. The value is valid sw0657840AccountIndex(Can't delete administrator).rw INTEGER .1.3.6.1.4.1.5205.2.9.1.1.4.6 |
sw0657840Snmp OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.2 |
sw0657840GetCommunityGet/Set the get-community of the SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.2.1 |
sw0657840SetCommunityGet/Set the set-community of the SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.2.2 |
sw0657840TrapHostNumberGet the number of trap hosts.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.2.3 |
sw0657840TrapHostTableA list of trap host entry. The numbers of entries are given by the value of sw0657840TrapHostNumber. SEQUENCE OF SW0657840TrapHostEntry .1.3.6.1.4.1.5205.2.9.1.2.4 |
sw0657840TrapHostEntryThis is the entry information for trap host. SW0657840TrapHostEntry .1.3.6.1.4.1.5205.2.9.1.2.4.1 |
sw0657840TrapHostIndexThe index of the trap host entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.2.4.1.1 |
sw0657840TrapHostIPThis is the IP of the trap host.rw IpAddress .1.3.6.1.4.1.5205.2.9.1.2.4.1.2 |
sw0657840TrapHostPortThis is the receiving-port number of the trap host.rw INTEGER .1.3.6.1.4.1.5205.2.9.1.2.4.1.3 |
sw0657840TrapHostCommunityThe community name for the trap PDU.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.2.4.1.4 |
sw0657840Alarm OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.3 |
sw0657840Event OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.3.1 |
sw0657840EventNumberGet the total number of alarm events.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.3.1.1 |
sw0657840EventTableThis is a list of alarm event entry. The numbers of entries are given by the value of sw0657840EventNumber. SEQUENCE OF SW0657840EventEntry .1.3.6.1.4.1.5205.2.9.1.3.1.2 |
sw0657840EventEntryThis is the entry information for alarm event. SW0657840EventEntry .1.3.6.1.4.1.5205.2.9.1.3.1.2.1 |
sw0657840EventIndexThis is the index of the alarm event entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.3.1.2.1.1 |
sw0657840EventNameThis is the alarm event name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.3.1.2.1.2 |
sw0657840EventSendEmailSend email when alarm event is triggered.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.3.1.2.1.3 |
sw0657840EventSendSMSSend SMS when alarm event is triggered.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.3.1.2.1.4 |
sw0657840EventSendTrapSend trap when alarm event is triggered.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.3.1.2.1.5 |
sw0657840Email OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.3.2 |
sw0657840EmailServerThis is the SMTP server for alarm event.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.3.2.1 |
sw0657840EmailUsernameThis is the Username of SMTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.3.2.2 |
sw0657840EmailPasswordThis is the User Password of SMTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.3.2.3 |
sw0657840EmailUserNumberThe number of the email users that you want to send the alarm notification.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.3.2.4 |
sw0657840EmailUserTableThis is a list of email user entry. The numbers of entries are given by the value of sw0657840EmailUserNumber. SEQUENCE OF SW0657840EmailUserEntry .1.3.6.1.4.1.5205.2.9.1.3.2.5 |
sw0657840EmailUserEntryThis is the Entry information for email user entry. SW0657840EmailUserEntry .1.3.6.1.4.1.5205.2.9.1.3.2.5.1 |
sw0657840EmailUserIndexThis is the index of the email user entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.3.2.5.1.1 |
sw0657840EmailUserAddressThis is the email address of the email user entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.3.2.5.1.2 |
sw0657840SMS OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.3.3 |
sw0657840SMSServerThis is the SMS server for alarm event.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.3.3.1 |
sw0657840SMSUsernameThis is the Username of SMS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.3.3.2 |
sw0657840SMSPasswordThis is the Password of SMS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.3.3.3 |
sw0657840SMSUserNumberThe number of the SMS users that you want to send the alarm notification.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.3.3.4 |
sw0657840SMSUserTableThis is a list of SMS user entry. The numbers of entries are given by the value of sw0657840SMSUserNumber. SEQUENCE OF SW0657840SMSUserEntry .1.3.6.1.4.1.5205.2.9.1.3.3.5 |
sw0657840SMSUserEntryThis is the Entry information for SMS user entry. SW0657840SMSUserEntry .1.3.6.1.4.1.5205.2.9.1.3.3.5.1 |
sw0657840SMSUserIndexThis is the index of the SMS user entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.3.3.5.1.1 |
sw0657840SMSUserMobilePhoneThe SMS phone number of the SMS user entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.3.3.5.1.2 |
sw0657840Tftp OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.4 |
sw0657840TftpServerGet/Set the tftp server.rw IpAddress .1.3.6.1.4.1.5205.2.9.1.4.1 |
sw0657840Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.5 |
sw0657840SaveRestore OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.5.1 |
sw0657840SaveStartSave current configuration into flash memory (Save as Start Configuration).
Get this OID always return zero.
1 - save.
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.5.1.1 |
sw0657840SaveUserSave current configuration into flash memory (Save as User Configuration).
Get this OID always return zero.
1 - save.
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.5.1.2 |
sw0657840RestoreDefaultRestore factory default configuration.
Get this OID always return zero.
2 - restore default included default ip address.
1 - restore default without changing current ip address.
0 - do nothing.rw INTEGER(0|1|2) .1.3.6.1.4.1.5205.2.9.1.5.1.3 |
sw0657840RestoreUserRestore user configuration.
Get this OID always return zero.
1 - restore.
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.5.1.4 |
sw0657840ConfigFile OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.5.2 |
sw0657840ExportConfigNameGet/Set the export file path and name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.5.2.1 |
sw0657840DoExportConfigDo export-config.
Get this OID always return zero.
1 - export start section.
2 - export user-conf section.rw INTEGER(1|2) .1.3.6.1.4.1.5205.2.9.1.5.2.2 |
sw0657840ImportConfigNameGet/Set the import file path and name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.5.2.3 |
sw0657840DoImportConfigDo import-config.
Get this OID always return zero.
1 - import start section.
2 - import user-conf section.rw INTEGER(1|2) .1.3.6.1.4.1.5205.2.9.1.5.2.4 |
sw0657840Diagnostic OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.6 |
sw0657840EEPROMTestEEPROM access test.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.6.1 |
sw0657840UartTestUART access test.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.6.2 |
sw0657840DramTestDRAM access test.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.6.3 |
sw0657840FlashTestFlash memory access test.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.6.4 |
sw0657840InternalLoopbackTestInternal loopback test.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.6.5 |
sw0657840ExternalLoopbackTestExternal loopback test.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.6.6 |
sw0657840PingTestSet the host address that you want to ping and the system will return the test result.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.6.7 |
sw0657840Log OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.7 |
sw0657840ClearLogClear system log.
Get this OID always return zero.
1 - clear log.
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.7.1 |
sw0657840UploadLogUpload current system log. Set the correct tftp server first.
The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'.
Get this OID always return zero.
1 - upload log
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.7.2 |
sw0657840AutoUploadLogStateEnable auto-upload log function. Set the correct tftp server first.
The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'.
Get this OID always return zero.
1 - Enable auto-upload
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.7.3 |
sw0657840LogNumberGet the number of current system log.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.7.4 |
sw0657840LogTableThis is a list of log entry. The numbers of entries are given by the value of sw0657840LogNumber. SEQUENCE OF SW0657840LogEntry .1.3.6.1.4.1.5205.2.9.1.7.5 |
sw0657840LogEntryThis is the Entry information for system log. SW0657840LogEntry .1.3.6.1.4.1.5205.2.9.1.7.5.1 |
sw0657840LogIndexThis is the index of the log entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.7.5.1.1 |
sw0657840LogEventThis is the detail information of the log entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.7.5.1.2 |
sw0657840Firmware OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.8 |
sw0657840FirmwareFileNameGet/Set the path and filename for firmware upgrading.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.8.1 |
sw0657840DoFirmwareUpgradeDo firmware upgrade. Get this OID always return zero.
1 - do firmware upgrade.
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.8.2 |
sw0657840Port OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.9 |
sw0657840PortStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.9.1 |
sw0657840PortStatusNumberGet the number of port.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.9.1.1 |
sw0657840PortStatusTableThis is a list of port status entry. The numbers of entries are given by the value of sw0657840PortStatusNumber. SEQUENCE OF SW0657840PortStatusEntry .1.3.6.1.4.1.5205.2.9.1.9.1.2 |
sw0657840PortStatusEntryThis is the entry(s) for port status information. SW0657840PortStatusEntry .1.3.6.1.4.1.5205.2.9.1.9.1.2.1 |
sw0657840PortStatusIndexThis is the index of the port status entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.9.1.2.1.1 |
sw0657840PortStatusMediaThe port media type of the port status entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.9.1.2.1.2 |
sw0657840PortStatusLinkThis is the port link of the port status entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.9.1.2.1.3 |
sw0657840PortStatusPortStateThis is the port state of the port status entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.9.1.2.1.4 |
sw0657840PortStatusAutoNegoThis is the auto negotiation of the port status entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.9.1.2.1.5 |
sw0657840PortStatusSpdDpxThis is the speed/duplex of the port status entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.9.1.2.1.6 |
sw0657840PortStatusFlwCtrlThis is the flow control of the port status entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.9.1.2.1.7 |
sw0657840PortStatuDescriptionThis is the description of port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.9.1.2.1.8 |
sw0657840PortConf OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.9.2 |
sw0657840PortConfNumberGet the number of port configuration.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.9.2.1 |
sw0657840PortConfTableThis is a list of port configuration entry. The numbers of entries are given by the value of sw0657840PortConfNumber. SEQUENCE OF SW0657840PortConfEntry .1.3.6.1.4.1.5205.2.9.1.9.2.2 |
sw0657840PortConfEntryThis is the Entry(s) for port configuration information. SW0657840PortConfEntry .1.3.6.1.4.1.5205.2.9.1.9.2.2.1 |
sw0657840PortConfIndexThis is the index of the port configuration entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.9.2.2.1.1 |
sw0657840PortConfPortStateThis is the port state of the port configuration entry.
0 - disabled.
1 - enabled.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.9.2.2.1.2 |
sw0657840PortConfSpdDpxThis is the speed/duplex of the port configuration entry.
0 - auto.
1 - 10M/Half.
2 - 10M/Full.
3 - 100M/Half.
4 - 100M/Full.
5 - 1G/Full.rw INTEGER .1.3.6.1.4.1.5205.2.9.1.9.2.2.1.3 |
sw0657840PortConfFlwCtrlThis is the flow control of the port configuration entry.
0 - disabled.
1 - enabled.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.9.2.2.1.4 |
sw0657840PortConfDescriptionThis is the description of port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.9.2.2.1.5 |
sw0657840Mirror OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.10 |
sw0657840MirrorModeGet/Set the Mirror mode.
0 - disabled.
1 - rx enable.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.10.1 |
sw0657840MirroringPortGet/Set the mirroring port.
The port range is from 1 to 24.rw INTEGER .1.3.6.1.4.1.5205.2.9.1.10.2 |
sw0657840MirroredPortsGet/Set the monitored ports.
The port range is from 1 to 24, and the syntax is 1,5-7.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.10.3 |
sw0657840MaxPktLen OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.11 |
sw0657840MaxPktLen1 OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.11.1 |
sw0657840MaxPktLenPortNumberGet the number of Max. packet length.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.11.1.1 |
sw0657840MaxPktLenConfTableThis is a list of Max. packet length entry. The numbers of entries are given by the value of sw0657840MaxPktLenPortNumber. SEQUENCE OF SW0657840MaxPktLenConfEntry .1.3.6.1.4.1.5205.2.9.1.11.1.2 |
sw0657840MaxPktLenConfEntryEntry(s) for Max. packet length information. SW0657840MaxPktLenConfEntry .1.3.6.1.4.1.5205.2.9.1.11.1.2.1 |
sw0657840MaxPktLenConfIndexThis is the index of the Max. packet length entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.11.1.2.1.1 |
sw0657840MaxPktLenConfSettingGet/Set the Max. packet length.
The Max. packet length is 1518,1532,or 9216.rw INTEGER(1518|1532|9216) .1.3.6.1.4.1.5205.2.9.1.11.1.2.1.2 |
sw0657840Bandwidth OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.12 |
sw0657840Bandwidth1 OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.12.1 |
sw0657840BandwidthPortNumberGet the number of bandwidth management configuration.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.12.1.1 |
sw0657840BandwidthConfTableThis is a list of bandwidth management configuration entry. The numbers of entries are given by the value of sw0657840BandwidthPortNumber. SEQUENCE OF SW0657840BandwidthConfEntry .1.3.6.1.4.1.5205.2.9.1.12.1.2 |
sw0657840BandwidthConfEntryThis is the Entry(s) for bandwidth management configuration information. SW0657840BandwidthConfEntry .1.3.6.1.4.1.5205.2.9.1.12.1.2.1 |
sw0657840BandwidthConfIndexThis is the index of the bandwidth management configuration entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.12.1.2.1.1 |
sw0657840BandwidthConfIngressStateThe ingress state of the bandwidth management configures entry.
0 - disabled.
1 - enabled.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.12.1.2.1.2 |
sw0657840BandwidthConfIngressBWGet/Set the ingress rate of the bandwidth management configuration.
The ingress rate is from 0 to 1000.rw INTEGER .1.3.6.1.4.1.5205.2.9.1.12.1.2.1.3 |
sw0657840BandwidthConfStormStateThe storm state of the bandwidth management configuration entry.
0 - disabled.
1 - enabled.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.12.1.2.1.4 |
sw0657840BandwidthConfStormBWGet/Set the storm rate of the bandwidth management configuration.
The storm rate is from 0 to 1000.rw INTEGER .1.3.6.1.4.1.5205.2.9.1.12.1.2.1.5 |
sw0657840BandwidthConfEgressStateThe egress state of the bandwidth management configuration entry.
0 - disabled.
1 - enabled.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.12.1.2.1.6 |
sw0657840BandwidthConfEgressBWGet/Set the egress rate of the bandwidth management configuration.
The egress rate is from 0 to 1000.rw INTEGER .1.3.6.1.4.1.5205.2.9.1.12.1.2.1.7 |
sw0657840LoopDetectedConf OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.13 |
sw0657840LoopDetectedNumberGet the number of loop detected entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.13.1 |
sw0657840LoopDetectedTableA list of loop detected entry. The numbers of entries are given by the value of sw0657840LoopDetectedNumber. SEQUENCE OF SW0657840LoopDetectedEntry .1.3.6.1.4.1.5205.2.9.1.13.2 |
sw0657840LoopDetectedEntryEntry(s) for loop detected information. SW0657840LoopDetectedEntry .1.3.6.1.4.1.5205.2.9.1.13.2.1 |
sw0657840LoopDetectedfIndexThe index of the loop detected entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.13.2.1.1 |
sw0657840LoopDetectedStateEblThe state of the loop detected entry.
0 - disabled.
1 - enabled.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.13.2.1.2 |
sw0657840LoopDetectedCurrentStatusThe current status of the loop detected port.
0 - unlocked
1 - locked due to the loop conditionro INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.13.2.1.3 |
sw0657840LoopDetectedResumedUnlock the port which is locked due to loop condition. Get this OID always return zero.
1 - unlock the port,
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.13.2.1.4 |
sw0657840LoopDetectedActionSet the corresponding action while loop is detected.
1 - lock the loop port,
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.5205.2.9.1.13.3 |
sw0657840SFPInfo OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.14 |
sw0657840SFPInfoNumberGet the number of sfp info entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.14.1 |
sw0657840SFPInfoTableA list of sfp info entry. The numbers of entries are given by the value of sw0657840SFPInfoNumber. SEQUENCE OF SW0657840SFPInfoEntry .1.3.6.1.4.1.5205.2.9.1.14.2 |
sw0657840SFPInfoEntryEntry(s) for SFP information. SW0657840SFPInfoEntry .1.3.6.1.4.1.5205.2.9.1.14.2.1 |
sw0657840SFPInfoIndexThe index of the sfp info entry.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.14.2.1.1 |
sw0657840SFPConnectorTypeGet connector type of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.2 |
sw0657840SFPFiberTypeGet fiber type of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.3 |
sw0657840SFPWavelengthGet tx central wavelength of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.4 |
sw0657840SFPBaudRateGet baud rate of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.5 |
sw0657840SFPVendorOUIGet vendor OUI of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.6 |
sw0657840SFPVendorNameGet vendor name of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.7 |
sw0657840SFPVendorPNGet vendor part number of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.8 |
sw0657840SFPVendorRevGet vendor revision number of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.9 |
sw0657840SFPVendorSNGet vendor serial number of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.10 |
sw0657840SFPDateCodeGet data code of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.11 |
sw0657840SFPTemperatureGet current temperature of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.12 |
sw0657840SFPVccGet current internal supply voltage of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.13 |
sw0657840SFPTxBiasGet current TX Bias of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.14 |
sw0657840SFPTxPWRGet current TX output power of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.15 |
sw0657840SFPRxPWRGet current Received Power of the sfp.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.14.2.1.16 |
sw0657840TrapEntry OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.20 |
sw0657840ModuleInsertedSend the trap when a module is inserted to the system. The OID value means
the port number. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.1 |
sw0657840ModuleRemovedSend the trap when a module is removed from the system. The OID value means
the port number. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.2 |
sw0657840DualMediaSwappedSend the trap when the dual media port changed. The OID value means the port number. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.3 |
sw0657840LoopDetectedSend the trap when loop condition has been detected. The OID value means the port number. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.5 |
sw0657840StpStateDisabledSend the trap when the operational state of STP is from enabled to disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.100 |
sw0657840StpStateEnabledSend the trap when the operational state of STP is from disabled to enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.101 |
sw0657840StpTopologyChangedSend the trap when RSTP determines a port should enter the FORWARDING state
(a topology change occurs). The OID value is the ifIndex of the port that
produces the topology change. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.102 |
sw0657840LacpStateDisabledSend the trap when the operational state of LACP is from enabled to disabled.
The OID value means the disabled Group ID. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.120 |
sw0657840LacpStateEnabledSend the trap when the operational state of LACP is from disabled to enabled.
The OID value means the disabled Group ID. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.121 |
sw0657840LacpPortAddedSend the trap when the state of port is in 'trunk ready'. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.123 |
sw0657840LacpPortTrunkFailureSend the trap when one port is not able to be aggregated
due to duplex-mode of the port. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.124 |
sw0657840GvrpStateDisabledSend the trap when the operational state of GVRP is from enabled to disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.140 |
sw0657840GvrpStateEnabledSend the trap when the operational state of LACP is from disabled to enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.141 |
sw0657840VlanStateDisabledSend the trap when the operational state of vlan is from enabled to disabled.
The OID value means the enabled Group ID. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.150 |
sw0657840VlanPortBaseEnabledSend the trap when the operational state of vlan is changed to port-based vlan. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.151 |
sw0657840VlanTagBaseEnabledSend the trap when the operational state of vlan is changed to tag-based vlan. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.152 |
sw0657840VlanMetroModeEnabledSend the trap when the operational state of vlan is changed to Metro-mode vlan.
The OID value means the uplink port with this metro-mode vlan. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.153 |
sw0657840VlanDoubleTagEnabledSend the trap when the operational state of vlan is changed to Double-tag vlan. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.154 |
sw0657840UserLoginSend the trap when one user logins the system. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.200 |
sw0657840UserLogoutSend the trap when one user logouts the system. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.9.1.20.201 |
sw0657840TrapVariable OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.9.1.21 |
usernameSystem account name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.21.1 |
groupIdThe Trunk group ID of LACP.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.21.2 |
actorkeyThis is the actor key information for LACP.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.21.3 |
partnerkeyThis is the partner key information for LACP.ro INTEGER .1.3.6.1.4.1.5205.2.9.1.21.4 |
uplinkUplink port(s) in the metro-mode vlan.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5205.2.9.1.21.5 |