Home/Catalog/PRIVATE-FEL2Mod-SW24-MIB

PRIVATE-FEL2Mod-SW24-MIB

AI MIB Summary

The PRIVATE-FEL2Mod-SW24-MIB provides vendor-specific monitoring for xxx Tech Layer 2 switch hardware, exposing private OID extensions for interface statistics, port states, and device operational parameters not covered by standard MIBs. This module enables granular visibility into proprietary switch metrics and internal subsystem states for the xxx Tech SW24 platform.

The MIB module is for xxx Tech.
Main OID:
privatetech.1.3.6.1.4.1.5205
215
Objects
Active
Status
4
Dependencies

Imported Objects

SNMPv2-TC
SNMPv2-CONF
SNMPv2-SMI
RFC1213-MIB

Objects

215 total
Object Name
privatetechThe MIB module is for xxx Tech.
MODULE-IDENTITY
.1.3.6.1.4.1.5205
switch
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2
feL2ModSW24ProductID
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19
feL2ModSW24Produces
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1
feL2ModSW24System
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.1
feL2ModSW24CommonSys
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.1.1
feL2ModSW24RebootReboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving startrw
INTEGER(0|1|2)
.1.3.6.1.4.1.5205.2.19.1.1.1.1
feL2ModSW24BiosVsersionGet the BIOS version of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.1.2
feL2ModSW24FirmwareVersionGet the firmware version of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.1.3
feL2ModSW24HardwareVersionGet the hardware version of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.1.4
feL2ModSW24MechanicalVersionGet the mechanical version of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.1.5
feL2ModSW24SerialNumberGet the Serial number of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.1.6
feL2ModSW24HostMacAddressGet the MAC address of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.1.7
feL2ModSW24DevicePortGet the quantity of ports that this system owns now.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.1.8
feL2ModSW24RamSizeGet the RAM size of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.1.9
feL2ModSW24FlashSizeGet the flash size of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.1.10
feL2ModSW24IP
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.1.2
feL2ModSW24DhcpSettingGet/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enablerw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.1.2.1
feL2ModSW24IPAddressGet/Set the IP address of the system. You can't set this OID if DHCP status is enabled.rw
IpAddress
.1.3.6.1.4.1.5205.2.19.1.1.2.2
feL2ModSW24NetMaskGet/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled.rw
IpAddress
.1.3.6.1.4.1.5205.2.19.1.1.2.3
feL2ModSW24DefaultGatewayGet/Set the default gateway of the system. You can't set this OID if DHCP status is enabled.rw
IpAddress
.1.3.6.1.4.1.5205.2.19.1.1.2.4
feL2ModSW24DnsSettingGet/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - auto, the DNS server is assigned by DHCP server.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.1.2.5
feL2ModSW24DnsServerGet/Set the DNS server of the system.rw
IpAddress
.1.3.6.1.4.1.5205.2.19.1.1.2.6
feL2ModSW24Time
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.1.3
feL2ModSW24SystemCurrentTimeGet the current time of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.3.1
feL2ModSW24ManualTimeSettingGet/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . The value range: Year : 2000 - 2036, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59, Sec : 0 - 59.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.3.2
feL2ModSW24NTPServerGet/Set the NTP Time Server. You can use the IP address or domain name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.3.3
feL2ModSW24NTPTimeZoneGet/Set the NTP Time Zone. The value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -07:00, -6 - GMT -06:00, -5 - GMT -05:00, -4 - GMT -04:00, -3 - GMT -03:00, -2 - GMT -02:00, -1 - GMT -01:00, 0 - GMT +00:00, 1 - GMT +01:00, 2 - GMT +02:00, 3 - GMT +03:00, 4 - GMT +04:00, 5 - GMT +05:00, 6 - GMT +06:00, 7 - GMT +07:00, 8 - GMT +08:00, 9 - GMT +09:00, 10 - GMT +10:00, 11 - GMT +11:00, 12 - GMT +12:00, 13 - GMT +13:00.rw
INTEGER(-12..13)
.1.3.6.1.4.1.5205.2.19.1.1.3.4
feL2ModSW24NTPTimeSyncSync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! The value range (0|1): 1 - sync. 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.1.3.5
feL2ModSW24DaylightSavingTimeGet/Set the daylight saving time. The value range is between -5 and 5. (Unit: hour)rw
INTEGER(-5..5)
.1.3.6.1.4.1.5205.2.19.1.1.3.6
feL2ModSW24DaylightStartTimeGet/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 10/01/00 month: 01~12, day: 01~31, hour: 00~23 .rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.3.7
feL2ModSW24DaylightEndTimeGet/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 04/01/00 month: 01~12, day: 01~31, hour: 00~23 .rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.3.8
feL2ModSW24Account
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.1.4
feL2ModSW24AccountNumberGet the current account number(s) of the system.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.1.4.1
feL2ModSW24AccountTableThis is a list of FEL2ModSW24AccountEntry. The numbers of entries are given by the value of feL2ModSW24AccountNumber.
SEQUENCE OF FEL2ModSW24AccountEntry
.1.3.6.1.4.1.5205.2.19.1.1.4.2
feL2ModSW24AccountEntryThis is the Entry(s) for account information.
FEL2ModSW24AccountEntry
.1.3.6.1.4.1.5205.2.19.1.1.4.2.1
feL2ModSW24AccountIndexThis is the index of the account entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.1.4.2.1.1
feL2ModSW24AccountAuthorizationThis is the authorization of the account entry.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.4.2.1.2
feL2ModSW24AccountNameThis is the username of the account entry.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.4.2.1.3
feL2ModSW24AccountPasswordThis is the password of the account entry. The return value is always '********'.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.4.2.1.4
feL2ModSW24AccountAddNameThis is the account name for adding operation.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.4.3
feL2ModSW24AccountAddPasswordThis is the account password for adding operation. The return value is always '********'.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.1.4.4
feL2ModSW24DoAccountAddAdd account name. OID feL2ModSW24AccountAddName and feL2ModSW24AccountAddPassword must be filled first. Get this OID always return zero. 1 - add account. 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.1.4.5
feL2ModSW24AccountDelDelete account. The value is valid feL2ModSW24AccountIndex(Can't delete administrator).rw
INTEGER
.1.3.6.1.4.1.5205.2.19.1.1.4.6
feL2ModSW24Snmp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.2
feL2ModSW24GetCommunityGet/Set the get-community of the SNMP.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.2.1
feL2ModSW24SetCommunityGet/Set the set-community of the SNMP.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.2.2
feL2ModSW24TrapHostNumberGet the number of trap hosts.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.2.3
feL2ModSW24TrapHostTableA list of trap host entry. The numbers of entries are given by the value of feL2ModSW24TrapHostNumber.
SEQUENCE OF FEL2ModSW24TrapHostEntry
.1.3.6.1.4.1.5205.2.19.1.2.4
feL2ModSW24TrapHostEntryThis is the entry information for trap host.
FEL2ModSW24TrapHostEntry
.1.3.6.1.4.1.5205.2.19.1.2.4.1
feL2ModSW24TrapHostIndexThe index of the trap host entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.2.4.1.1
feL2ModSW24TrapHostIPThis is the IP of the trap host.rw
IpAddress
.1.3.6.1.4.1.5205.2.19.1.2.4.1.2
feL2ModSW24TrapHostPortThis is the receiving-port number of the trap host.rw
INTEGER
.1.3.6.1.4.1.5205.2.19.1.2.4.1.3
feL2ModSW24TrapHostCommunityThe community name for the trap PDU.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.2.4.1.4
feL2ModSW24Alarm
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.3
feL2ModSW24Event
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.3.1
feL2ModSW24EventNumberGet the total number of alarm events.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.3.1.1
feL2ModSW24EventTableA list of alarm event entry. The numbers of entries are given by the value of feL2ModSW24EventNumber.
SEQUENCE OF FEL2ModSW24EventEntry
.1.3.6.1.4.1.5205.2.19.1.3.1.2
feL2ModSW24EventEntryThis is the entry information for alarm event.
FEL2ModSW24EventEntry
.1.3.6.1.4.1.5205.2.19.1.3.1.2.1
feL2ModSW24EventIndexThis is the index of the alarm event entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.3.1.2.1.1
feL2ModSW24EventNameThis is the alarm event name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.3.1.2.1.2
feL2ModSW24EventSendEmailSend email when alarm event is triggered.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.3.1.2.1.3
feL2ModSW24EventSendSMSSend SMS when alarm event is triggered.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.3.1.2.1.4
feL2ModSW24EventSendTrapSend trap when alarm event is triggered.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.3.1.2.1.5
feL2ModSW24Email
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.3.2
feL2ModSW24EmailServerThis is the SMTP server for alarm event.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.3.2.1
feL2ModSW24EmailUsernameThis is the Username of SMTP server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.3.2.2
feL2ModSW24EmailPasswordThis is the User Password of SMTP server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.3.2.3
feL2ModSW24EmailUserNumberThe number of the email users that you want to send the alarm notification.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.3.2.4
feL2ModSW24EmailUserTableThis is a list of email user entry. The numbers of entries are given by the value of feL2ModSW24EmailUserNumber.
SEQUENCE OF FEL2ModSW24EmailUserEntry
.1.3.6.1.4.1.5205.2.19.1.3.2.5
feL2ModSW24EmailUserEntryThis is the Entry information for email user entry.
FEL2ModSW24EmailUserEntry
.1.3.6.1.4.1.5205.2.19.1.3.2.5.1
feL2ModSW24EmailUserIndexThis is the index of the email user entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.3.2.5.1.1
feL2ModSW24EmailUserAddressThis is the email address of the email user entry.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.3.2.5.1.2
feL2ModSW24SMS
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.3.3
feL2ModSW24SMSServerThis is the SMS server for alarm event.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.3.3.1
feL2ModSW24SMSUsernameThis is the Username of SMS server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.3.3.2
feL2ModSW24SMSPasswordThis is the Password of SMS server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.3.3.3
feL2ModSW24SMSUserNumberThe number of the SMS users that you want to send the alarm notification.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.3.3.4
feL2ModSW24SMSUserTableThis is a list of SMS user entry. The numbers of entries are given by the value of feL2ModSW24SMSUserNumber.
SEQUENCE OF FEL2ModSW24SMSUserEntry
.1.3.6.1.4.1.5205.2.19.1.3.3.5
feL2ModSW24SMSUserEntryThis is the Entry information for SMS user entry.
FEL2ModSW24SMSUserEntry
.1.3.6.1.4.1.5205.2.19.1.3.3.5.1
feL2ModSW24SMSUserIndexThis is the index of the SMS user entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.3.3.5.1.1
feL2ModSW24SMSUserMobilePhoneThe SMS phone number of the SMS user entry.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.3.3.5.1.2
feL2ModSW24Tftp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.4
feL2ModSW24TftpServerGet/Set the tftp server.rw
IpAddress
.1.3.6.1.4.1.5205.2.19.1.4.1
feL2ModSW24Configuration
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.5
feL2ModSW24SaveRestore
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.5.1
feL2ModSW24SaveStartSave current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - save. 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.5.1.1
feL2ModSW24SaveUserSave current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - save. 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.5.1.2
feL2ModSW24RestoreDefaultRestore factory default configuration. Get this OID always return zero. 2 - restore default included default ip address. 1 - restore default without changing current ip address. 0 - do nothing.rw
INTEGER(0|1|2)
.1.3.6.1.4.1.5205.2.19.1.5.1.3
feL2ModSW24RestoreUserRestore user configuration. Get this OID always return zero. 1 - restore. 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.5.1.4
feL2ModSW24ConfigFile
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.5.2
feL2ModSW24ExportConfigNameGet/Set the export file path and name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.5.2.1
feL2ModSW24DoExportConfigDo export-config. Get this oid always return zero. 1 - export start section. 2 - export user-conf section.rw
INTEGER(1|2)
.1.3.6.1.4.1.5205.2.19.1.5.2.2
feL2ModSW24ImportConfigNameGet/Set the import file path and name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.5.2.3
feL2ModSW24DoImportConfigDo import-config. Get this OID always return zero. 1 - import start section. 2 - import user-conf section.rw
INTEGER(1|2)
.1.3.6.1.4.1.5205.2.19.1.5.2.4
feL2ModSW24Diagnostic
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.6
feL2ModSW24EEPROMTestEEPROM access test.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.6.1
feL2ModSW24UartTestUART access test.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.6.2
feL2ModSW24DramTestDRAM access test.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.6.3
feL2ModSW24FlashTestFlash memory access test.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.6.4
feL2ModSW24InternalLoopbackTestInternal loopback test.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.6.5
feL2ModSW24ExternalLoopbackTestExternal loopback test.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.6.6
feL2ModSW24PingTestSet the host address that you want to ping and the system will return the test result.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.6.7
feL2ModSW24Log
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.7
feL2ModSW24ClearLogClear system log. Get this OID always return zero. 1 - clear log. 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.7.1
feL2ModSW24UploadLogUpload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero. 1 - upload log 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.7.2
feL2ModSW24AutoUploadLogStateEnable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero. 1 - Enable auto-upload 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.7.3
feL2ModSW24LogNumberGet the number of current system log.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.7.4
feL2ModSW24LogTableThis is a list of log entry. The numbers of entries are given by the value of feL2ModSW24LogNumber.
SEQUENCE OF FEL2ModSW24LogEntry
.1.3.6.1.4.1.5205.2.19.1.7.5
feL2ModSW24LogEntryThis is the Entry information for system log.
FEL2ModSW24LogEntry
.1.3.6.1.4.1.5205.2.19.1.7.5.1
feL2ModSW24LogIndexThis is the index of the log entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.7.5.1.1
feL2ModSW24LogEventThis is the detail information of the log entry.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.7.5.1.2
feL2ModSW24Firmware
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.8
feL2ModSW24FirmwareFileNameGet/Set the path and filename for firmware upgrading.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.8.1
feL2ModSW24DoFirmwareUpgradeDo firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.8.2
feL2ModSW24Port
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.9
feL2ModSW24PortStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.9.1
feL2ModSW24PortStatusNumberGet the number of port.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.9.1.1
feL2ModSW24PortStatusTableThis is a list of port status entry. The numbers of entries are given by the value of feL2ModSW24PortStatusNumber.
SEQUENCE OF FEL2ModSW24PortStatusEntry
.1.3.6.1.4.1.5205.2.19.1.9.1.2
feL2ModSW24PortStatusEntryThis is the entry(s) for port status information.
FEL2ModSW24PortStatusEntry
.1.3.6.1.4.1.5205.2.19.1.9.1.2.1
feL2ModSW24PortStatusIndexThis is the index of the port status entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.9.1.2.1.1
feL2ModSW24PortStatusMediaThe port media type of the port status entry.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.9.1.2.1.2
feL2ModSW24PortStatusPortStateThis is the port state of the port status entry.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.9.1.2.1.4
feL2ModSW24PortStatusAutoNegoThis is the auto negotiation of the port status entry.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.9.1.2.1.5
feL2ModSW24PortStatusSpdDpxThis is the speed/duplex of the port status entry.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.9.1.2.1.6
feL2ModSW24PortStatusFlwCtrlThis is the flow control of the port status entry.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.9.1.2.1.7
feL2ModSW24PortStatuDescriptionThe description of port.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.9.1.2.1.8
feL2ModSW24PortConf
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.9.2
feL2ModSW24PortConfNumberGet the number of port configuration.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.9.2.1
feL2ModSW24PortConfTableThis is a list of port configuration entry. The numbers of entries are given by the value of feL2ModSW24PortConfNumber.
SEQUENCE OF FEL2ModSW24PortConfEntry
.1.3.6.1.4.1.5205.2.19.1.9.2.2
feL2ModSW24PortConfEntryThis is the Entry(s) for port configuration information.
FEL2ModSW24PortConfEntry
.1.3.6.1.4.1.5205.2.19.1.9.2.2.1
feL2ModSW24PortConfIndexThis is the index of the port configuration entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.9.2.2.1.1
feL2ModSW24PortConfPortStateThis is the port state of the port configuration entry. 0 - disabled. 1 - enabled.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.9.2.2.1.2
feL2ModSW24PortConfSpdDpxThis is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full.rw
INTEGER
.1.3.6.1.4.1.5205.2.19.1.9.2.2.1.3
feL2ModSW24PortConfFlwCtrlThis is the flow control of the port configuration entry. 0 - disabled. 1 - enabled.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.9.2.2.1.4
feL2ModSW24PortConfDescriptionThe description of port.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.9.2.2.1.5
feL2ModSW24Mirror
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.10
feL2ModSW24MirrorModeGet/Set the Mirror mode. 0 - disabled. 1 - rx enable.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.10.1
feL2ModSW24MirroringPortGet/Set the mirroring port. The port range is from 1 to 24.rw
INTEGER
.1.3.6.1.4.1.5205.2.19.1.10.2
feL2ModSW24MirroredPortsGet/Set the monitored ports. The port range is from 1 to 24, and the syntax is 1,5-7.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.10.3
feL2ModSW24MaxPktLen
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.11
feL2ModSW24MaxPktLen1
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.11.1
feL2ModSW24MaxPktLenPortNumberGet the number of Max. packet length.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.11.1.1
feL2ModSW24MaxPktLenConfTableThis is a list of Max. packet length entry. The numbers of entries are given by the value of feL2ModSW24MaxPktLenPortNumber.
SEQUENCE OF FEL2ModSW24MaxPktLenConfEntry
.1.3.6.1.4.1.5205.2.19.1.11.1.2
feL2ModSW24MaxPktLenConfEntryEntry(s) for Max. packet length information.
FEL2ModSW24MaxPktLenConfEntry
.1.3.6.1.4.1.5205.2.19.1.11.1.2.1
feL2ModSW24MaxPktLenConfIndexThis is the index of the Max. packet length entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.11.1.2.1.1
feL2ModSW24MaxPktLenConfSettingGet/Set the Max. packet length. The Max. packet length is 1518,1532,or 9216.rw
INTEGER(1518|1532|9216)
.1.3.6.1.4.1.5205.2.19.1.11.1.2.1.2
feL2ModSW24Bandwidth
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.12
feL2ModSW24Bandwidth1
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.12.1
feL2ModSW24BandwidthPortNumberGet the number of bandwidth management configuration.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.12.1.1
feL2ModSW24BandwidthConfTableA list of bandwidth management configuration entry. The numbers of entries are given by the value of feL2ModSW24BandwidthPortNumber.
SEQUENCE OF FEL2ModSW24BandwidthConfEntry
.1.3.6.1.4.1.5205.2.19.1.12.1.2
feL2ModSW24BandwidthConfEntryThis is the Entry(s) for bandwidth management configuration information.
FEL2ModSW24BandwidthConfEntry
.1.3.6.1.4.1.5205.2.19.1.12.1.2.1
feL2ModSW24BandwidthConfIndexThis is the index of the bandwidth management configuration entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.12.1.2.1.1
feL2ModSW24BandwidthConfIngressStateThe ingress state of the bandwidth management configures entry. 0 - disabled. 1 - enabled.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.12.1.2.1.2
feL2ModSW24BandwidthConfIngressBWGet/Set the ingress rate of the bandwidth management configuration. The ingress rate is from 0 to 1000.rw
INTEGER
.1.3.6.1.4.1.5205.2.19.1.12.1.2.1.3
feL2ModSW24BandwidthConfStormStateThe storm state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.12.1.2.1.4
feL2ModSW24BandwidthConfStormBWGet/Set the storm rate of the bandwidth management configuration. The storm rate is from 0 to 1000.rw
INTEGER
.1.3.6.1.4.1.5205.2.19.1.12.1.2.1.5
feL2ModSW24BandwidthConfEgressStateThe egress state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.12.1.2.1.6
feL2ModSW24BandwidthConfEgressBWGet/Set the egress rate of the bandwidth management configuration. The egress rate is from 0 to 1000.rw
INTEGER
.1.3.6.1.4.1.5205.2.19.1.12.1.2.1.7
feL2ModSW24LoopDetectedConf
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.13
feL2ModSW24LoopDetectedNumberGet the number of loop detected entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.13.1
feL2ModSW24LoopDetectedTableA list of loop detected entry. The numbers of entries are given by the value of feL2ModSW24LoopDetectedNumber.
SEQUENCE OF FEL2ModSW24LoopDetectedEntry
.1.3.6.1.4.1.5205.2.19.1.13.2
feL2ModSW24LoopDetectedEntryEntry(s) for loop detected information.
FEL2ModSW24LoopDetectedEntry
.1.3.6.1.4.1.5205.2.19.1.13.2.1
feL2ModSW24LoopDetectedfIndexThe index of the loop detected entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.13.2.1.1
feL2ModSW24LoopDetectedStateEblThe state of the loop detected entry. 0 - disabled. 1 - enabled.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.13.2.1.2
feL2ModSW24LoopDetectedCurrentStatusThe current status of the loop detected port. 0 - unlocked 1 - locked due to the loop conditionro
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.13.2.1.3
feL2ModSW24LoopDetectedResumedUnlock the port which is locked due to loop condition. Get this OID always return zero. 1 - unlock the port, 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.13.2.1.4
feL2ModSW24LoopDetectedActionSet the corresponding action while loop is detected. 1 - lock the loop port, 0 - do nothing.rw
INTEGER(0|1)
.1.3.6.1.4.1.5205.2.19.1.13.3
feL2ModSW24SFPInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.14
feL2ModSW24SFPInfoNumberGet the number of sfp info entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.14.1
feL2ModSW24SFPInfoTableA list of sfp info entry. The numbers of entries are given by the value of feL2ModSW24SFPInfoNumber.
SEQUENCE OF FEL2ModSW24SFPInfoEntry
.1.3.6.1.4.1.5205.2.19.1.14.2
feL2ModSW24SFPInfoEntryEntry(s) for SFP information.
FEL2ModSW24SFPInfoEntry
.1.3.6.1.4.1.5205.2.19.1.14.2.1
feL2ModSW24SFPInfoIndexThe index of the sfp info entry.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.14.2.1.1
feL2ModSW24SFPConnectorTypeGet connector type of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.2
feL2ModSW24SFPFiberTypeGet fiber type of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.3
feL2ModSW24SFPWavelengthGet tx central wavelength of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.4
feL2ModSW24SFPBaudRateGet baud rate of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.5
feL2ModSW24SFPVendorOUIGet vendor OUI of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.6
feL2ModSW24SFPVendorNameGet vendor name of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.7
feL2ModSW24SFPVendorPNGet vendor part number of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.8
feL2ModSW24SFPVendorRevGet vendor revision number of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.9
feL2ModSW24SFPVendorSNGet vendor serial number of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.10
feL2ModSW24SFPDateCodeGet data code of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.11
feL2ModSW24SFPTemperatureGet current temperature of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.12
feL2ModSW24SFPVccGet current internal supply voltage of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.13
feL2ModSW24SFPTxBiasGet current TX Bias of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.14
feL2ModSW24SFPTxPWRGet current TX output power of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.15
feL2ModSW24SFPRxPWRGet current Received Power of the sfp.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.14.2.1.16
feL2ModSW24TrapEntry
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.20
feL2ModSW24ModuleInsertedSend the trap when a module is inserted to the system. The OID value means the port number.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.1
feL2ModSW24ModuleRemovedSend the trap when a module is removed from the system. The OID value means the port number.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.2
feL2ModSW24LoopDetectedSend the trap when loop condition has been detected. The OID value means the port number.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.5
feL2ModSW24StpStateDisabledSend the trap when the operational state of STP is from enabled to disabled.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.100
feL2ModSW24StpStateEnabledSend the trap when the operational state of STP is from disabled to enabled.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.101
feL2ModSW24StpTopologyChangedSend the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces the topology change
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.102
feL2ModSW24LacpStateDisabledSend the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.120
feL2ModSW24LacpStateEnabledSend the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.121
feL2ModSW24LacpPortAddedSend the trap when the state of port is in 'trunk ready'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.123
feL2ModSW24LacpPortTrunkFailureSend the trap when one port is not able to be aggregated due to duplex-mode of the port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.124
feL2ModSW24GvrpStateDisabledSend the trap when the operational state of GVRP is from enabled to disabled.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.140
feL2ModSW24GvrpStateEnabledSend the trap when the operational state of LACP is from disabled to enabled.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.141
feL2ModSW24VlanStateDisabledSend the trap when the operational state of vlan is from enabled to disabled. The OID value means the enabled Group ID.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.150
feL2ModSW24VlanPortBaseEnabledSend the trap when the operational state of vlan is changed to port-based vlan.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.151
feL2ModSW24VlanTagBaseEnabledSend the trap when the operational state of vlan is changed to tag-based vlan.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.152
feL2ModSW24VlanMetroModeEnabledSend the trap when the operational state of vlan is changed to Metro-mode vlan. The OID value means the uplink port with this metro-mode vlan.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.153
feL2ModSW24VlanDoubleTagEnabledSend the trap when the operational state of vlan is changed to Double-tag vlan.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.154
feL2ModSW24UserLoginSend the trap when one user logins the system.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.200
feL2ModSW24UserLogoutSend the trap when one user logouts the system.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5205.2.19.1.20.201
feL2ModSW24TrapVariable
OBJECT IDENTIFIER
.1.3.6.1.4.1.5205.2.19.1.21
usernameSystem account name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5205.2.19.1.21.1
groupIdThe Trunk group ID of LACP.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.21.2
actorkeyThis is the actor key information for LACP.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.21.3
partnerkeyThis is the partner key information for LACP.ro
INTEGER
.1.3.6.1.4.1.5205.2.19.1.21.4
PRIVATE-FEL2Mod-SW24-MIB - SNMP MIB Reference | MIBs Explorer