PRVT-PW-TDM-MIB
This MIB contains managed object definitions for encapsulating TDM (T1, E1, T3, E3, NxDS0) as pseudo-wires over packet-switching networks (PSN).
Main OID:
prvtPwVcTDMMIB.1.3.6.1.4.1.5205.2.200.2
104
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
104 total| Object Name |
|---|
prvtPwVc OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.200 |
prvtPwVcTDMMIBThis MIB contains managed object definitions for
encapsulating TDM (T1, E1, T3, E3, NxDS0) as
pseudo-wires over packet-switching networks (PSN). MODULE-IDENTITY .1.3.6.1.4.1.5205.2.200.2 |
SNMPv2-TCThis MIB contains managed object definitions for
encapsulating TDM (T1, E1, T3, E3, NxDS0) as
pseudo-wires over packet-switching networks (PSN). NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.200.2 |
prvtPwVcTDMObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.200.2.1 |
prvtPwVcTDMTableThis table contains basic information including ifIndex,
and pointers to entries in the relevant TDM config
tables for this TDM PW. SEQUENCE OF PrvtPwVcTDMEntry .1.3.6.1.4.1.5205.2.200.2.1.1 |
prvtPwVcTDMEntryThis table is indexed by the same index that was
created for the associated entry in the PW Table
(in the PW-STD-MIB).
An entry is created in this table by the agent for every
entry in the prvtPwVcTable with a prvtPwVcType of 'TDM'. PrvtPwVcTDMEntry .1.3.6.1.4.1.5205.2.200.2.1.1.1 |
prvtPwVcTDMModuleIdThe ID of the CES Module where the crcuit is configured.ro INTEGER .1.3.6.1.4.1.5205.2.200.2.1.1.1.1 |
prvtPwVcTDMCircuitIdThe ID of the CES Circuit that this PW represents.ro INTEGER .1.3.6.1.4.1.5205.2.200.2.1.1.1.2 |
prvtPwVcTDMTypeSpecifies the type of TDM PW. The connection assumed to be
symmetrical having the same value at both ends. To identify
structured vs. unstructured type for DS1 and E1, dsx1LineType
and dsx1SignalMode [DS1MIB] should be referenced. DS3 and E3
are always unstructured.ro Enumeration .1.3.6.1.4.1.5205.2.200.2.1.1.1.3 |
prvtPwVcRelTDMCfgIndexIndex to the relevant TDM configuration table entry
that appears in one of the related MIB modules
such as SAToP, TDMoIP or CESoPSN. It is likely that
multiple TDM PWs of the same characteristic will share
a single configuration entry of the relevant type.ro PrvtPwVcTDMCfgIndex .1.3.6.1.4.1.5205.2.200.2.1.1.1.4 |
prvtPwVcTDMTimeElapsedThe number of seconds, including partial seconds,
that have elapsed since the beginning of the current
measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the
current interval exceeds the maximum value, the
agent will return the maximum value.ro Integer32 .1.3.6.1.4.1.5205.2.200.2.1.1.1.5 |
prvtPwVcTDMValidIntervalsThe number of previous 15-minute intervals for which data
was collected.
An agent with TDM capability must be capable of supporting
at least n intervals. The minimum value of n is 4, The
default of n is 32 and the maximum value of n is 96.
The value will be <n> unless the measurement was (re-)
started within the last (<n>*15) minutes, in which case
the value will be the number of complete 15 minute
intervals for which the agent has at least some data.
In certain cases(e.g., in the case where the agent is
a proxy) it is possible that some intervals are unavailable.
In this case, this interval is the maximum interval number
for which data is available.ro Integer32 .1.3.6.1.4.1.5205.2.200.2.1.1.1.6 |
prvtPwVcTDMCurrentIndicationsThe following defects should be detected and reported
upon request:
-Stray packets MAY be detected by the PSN and multiplexing
layers. Stray packets MUST be discarded by the CE-bound IWF
and their detection MUST NOT affect mechanisms for detection
of packet loss.
-Malformed packets are detected by mismatch between the
expected packet size (taking the value of the L bit into
account) and the actual packet size inferred from the PSN and
multiplexing layers. Malformed in-order packets MUST be
discarded by the CE-bound IWF and replacement data generated
as for lost packets.
-Excessive packet loss rate is detected by computing the
average packet loss rate over the value of
prvtPwVcTDMAvePktLossTimeWindow and comparing it with a
preconfigured threshold [SATOP].
-Buffer overrun is detected in the normal operation state
when the CE bound IWF's jitter buffer cannot accommodate
newly arrived packets.
-Remote packet loss is indicated by reception of packets with
their R bit set.
-Packet misorder is detected by looking at the Sequence
number provided by the control word.
-TDM Fault, if L bit in the control word is set, it indicates
that TDM data carried in the payload is invalid due an
attachment circuit fault. When the L bit is set the payload
MAY be omitted in order to conserve bandwidth.
Note: the algorithm used to capture these indications
is implementation specific.ro Bits .1.3.6.1.4.1.5205.2.200.2.1.1.1.7 |
prvtPwVcTDMLatchedIndicationsThe state of TDM indicators when the TDM PW last declared
an error second (either as ES, SES or a second with
errors inside a UAS) condition. At this time, only LOPS
can create a failure. Since indicators other than LOPS are
useful, all are latched here. For bit definitions, see
prvtPwVcTDMCurrentIndications above.
Note: the algorithm used to latch these indications when
entering an defect state is implementation specific.ro Bits .1.3.6.1.4.1.5205.2.200.2.1.1.1.8 |
prvtPwVcTDMLastEsTimeStampThe value of sysUpTime on the most recent occasion at
which the TDM PW entered the ES or SES state.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5205.2.200.2.1.1.1.9 |
prvtPwVcTDMEmulationModeThe circuit emulation mode.ro Enumeration .1.3.6.1.4.1.5205.2.200.2.1.1.1.10 |
prvtPwVcTDMOperStatusThe operational status of the circuit.ro Enumeration .1.3.6.1.4.1.5205.2.200.2.1.1.1.11 |
prvtPwVcTDMClearCircuitStatisticsClear circuit statistics.rw Enumeration .1.3.6.1.4.1.5205.2.200.2.1.1.1.12 |
prvtPwVcTDMCfgTableThis table contains a set of parameters that may be
referenced by one or more TDM PWs in prvtPwVcTDMTable. SEQUENCE OF PrvtPwVcTDMCfgEntry .1.3.6.1.4.1.5205.2.200.2.1.3 |
prvtPwVcTDMCfgEntryThese parameters define the characteristics of a
TDM PW. They are grouped here to ease NMS burden.
Once an entry is created here it may be re-used
by many PWs. PrvtPwVcTDMCfgEntry .1.3.6.1.4.1.5205.2.200.2.1.3.1 |
prvtPwVcTDMCfgPayloadSizeThe value of this object indicates the PayLoad Size to
be defined during the PW setUp. Upon TX, implementation
must be capable of carrying that amount of data.
Upon RX, When the LEN field is set to 0, the payload of
packet MUST assume this size, and if the actual
packet size is inconsistent with this length,
the packet MUST be considered to be malformed.rw Unsigned32 .1.3.6.1.4.1.5205.2.200.2.1.3.1.1 |
prvtPwVcTDMCfgPktReorderIf set True: as CE bound packets are queued in the
jitter buffer, out of order packets are re-ordered. The
maximum sequence number differential (i.e., the range in
which re-sequencing can occur) is dependant on the depth
of the jitter buffer. See prvtPwVcTDMCfgJtrBfrDepth.
NOTE: Some implementations may not support this feature.
The agent is then required to set this False.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5205.2.200.2.1.3.1.2 |
prvtPwVcTDMCfgRtpHdrUsedIf set False: an RTP header is not pre-pended to the
TDM packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5205.2.200.2.1.3.1.3 |
prvtPwVcTDMCfgJtrBfrDepthThe size of the Jitter buffer SHOULD be defined to
a value that is capable to allow accommodation to the
PSN-specific packet delay variation.
If configured to a value not supported by the
implementation, the agent MUST return an error code
'jtrBfrDepth' in 'prvtPwVcTDMConfigError '
NOTE: jitter buffers are a limited resource to
be managed.rw Unsigned32 .1.3.6.1.4.1.5205.2.200.2.1.3.1.4 |
prvtPwVcTDMCfgChannelGroupThe circuit's channel group. This object is only valid if structured emulation mode is used.
If a group is not set the value of the object is 0.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.5 |
prvtPwVcTDMCfgPortsA bitmap of themodule's TDM ports belongng to the circuit.rw OCTET STRING .1.3.6.1.4.1.5205.2.200.2.1.3.1.6 |
prvtPwVcTDMCfgPeerIpTypeThe type of the peer's IP address.rw Enumeration .1.3.6.1.4.1.5205.2.200.2.1.3.1.7 |
prvtPwVcTDMCfgPeerIpAddressThe peer's IP address.rw IpAddress .1.3.6.1.4.1.5205.2.200.2.1.3.1.8 |
prvtPwVcTDMCfgPeerPortThe connection port.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.9 |
prvtPwVcTDMCfgPeerMACThe Peer MAC address. This object is only valid for Metro-Ethernet and Mpls circuits.
If an IP address is configured for the circuit, this object will display
the resolved MAC address.rw OCTET STRING .1.3.6.1.4.1.5205.2.200.2.1.3.1.10 |
prvtPwVcTDMCfgPeerEcidThe peer circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.11 |
prvtPwVcTDMCfgPeerOosEcidThe peer circuit identifier for the out-of-band signaling. This value is valid only when the object
prvtPwVcTDMCfgEcid is set and when the current protocol is metro-ethernetrw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.12 |
prvtPwVcTDMCfgVlanIdThe circuit Vlan ID.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.13 |
prvtPwVcTDMCfgVlanPrioThe prioirty for the VLAN set here, when the protocol for the circuit is metro-ethernetrw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.14 |
prvtPwVcTDMCfgLocalPortLocal UDP port.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.15 |
prvtPwVcTDMCfgEcidThe local circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.16 |
prvtPwVcTDMCfgOosEcidThe local circuit identifier for the out-of-band signaling. This value is valid only when the object
prvtPwVcTDMCfgEcid is set and when the current protocol is metro-ethernetrw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.17 |
prvtPwVcTDMCfgProtocolThe emulation protocol.rw Enumeration .1.3.6.1.4.1.5205.2.200.2.1.3.1.18 |
prvtPwVcTDMCfgAdminStatusThe administrative status of the circuit.rw Enumeration .1.3.6.1.4.1.5205.2.200.2.1.3.1.19 |
prvtPwVcTDMCfgRowStatusThis field is used to create and destroy TDM circuits.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5205.2.200.2.1.3.1.20 |
prvtPwVcTDMCfgRtpTRTP header.rw Enumeration .1.3.6.1.4.1.5205.2.200.2.1.3.1.21 |
prvtPwVcTDMCfgOosPortOos port.rw Unsigned32 .1.3.6.1.4.1.5205.2.200.2.1.3.1.22 |
prvtPwVcTDMCfgPayloadSuppressionControls payload suppression. Object does not require module to be restarted.rw Enumeration .1.3.6.1.4.1.5205.2.200.2.1.3.1.23 |
prvtPwVcTDMCfgInterfaceInterface used for configuring OC3 TDM circuits
P - Port Number, K, L, M standard numbering of SONET/SDH.rw PrvtPwVcTDMCfgInterface .1.3.6.1.4.1.5205.2.200.2.1.3.1.24 |
prvtPwVcTDMCfgIpTosSet/Show IP TOS informationrw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.25 |
prvtPwVcTDMCfgIpOosTosSet/Show IP Out Of Stream informationrw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.26 |
prvtPwVcTDMCfgPeerOosPortThis field is used to SET Destination Oos Portrw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.27 |
prvtPwVcTDMCfgMplsLocalLabelThe local circuit identifier. This object is only valid if the Circuit protocol is MPLSrw Unsigned32 .1.3.6.1.4.1.5205.2.200.2.1.3.1.28 |
prvtPwVcTDMCfgMplsPeerLabelThe peer circuit identifier. This object is only valid if the Circuit protocol is MPLSrw Unsigned32 .1.3.6.1.4.1.5205.2.200.2.1.3.1.29 |
prvtPwVcTDMCfgMplsTTLMPLS TTLrw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.30 |
prvtPwVcTDMCfgMplsExpMPLS EXPrw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.31 |
prvtPwVcTDMCfgMplsOosLocalLabelThe local circuit identifier for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLSrw Unsigned32 .1.3.6.1.4.1.5205.2.200.2.1.3.1.32 |
prvtPwVcTDMCfgMplsOosPeerLabelThe peer circuit identifier for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLSrw Unsigned32 .1.3.6.1.4.1.5205.2.200.2.1.3.1.33 |
prvtPwVcTDMCfgMplsOosTTLMPLS TTL for the out-of-band signaling.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.34 |
prvtPwVcTDMCfgMplsOosExpMPLS EXP for the out-of-band signaling.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.35 |
prvtPwVcTDMCfgRtpOosPayloadThis field is used to SET RTP Oos payload type.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.36 |
prvtPwVcTDMCfgRtpPayloadThis field is used to SET RTP payload type.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.3.1.37 |
prvtTDMChannelGrpTableThis table contains the set of available channel groups. SEQUENCE OF PrvtTDMChannelGrpEntry .1.3.6.1.4.1.5205.2.200.2.1.4 |
prvtTDMChannelGrpEntryThese parameters are used to configure a CES channel group. PrvtTDMChannelGrpEntry .1.3.6.1.4.1.5205.2.200.2.1.4.1 |
prvtTDMChannelGrpModuleIDThe index of the module to which this channel group belongs.ro Unsigned32 .1.3.6.1.4.1.5205.2.200.2.1.4.1.1 |
prvtTDMChannelGrpIDThe channel group ID.ro Unsigned32 .1.3.6.1.4.1.5205.2.200.2.1.4.1.2 |
prvtTDMChannelGrpCfgErrorThis object displays the correctness of the configuration. If it has a value of
channelGroupAtached(1) this channel group has been attached to a circuit and the
new configuration cannot be applied.ro Enumeration .1.3.6.1.4.1.5205.2.200.2.1.4.1.3 |
prvtTDMChannelGrpTimeSlotsThis object is used to configure which time slots are members of the given
channel group.rw TimeSlotList .1.3.6.1.4.1.5205.2.200.2.1.4.1.4 |
prvtTDMChannelGrpOC3TimeSlotsThis object is used to configure interface and time slots for the given channel
group in OC3 module.rw InterfaceTimeSlot .1.3.6.1.4.1.5205.2.200.2.1.4.1.5 |
prvtPwVcTDMPerfCurrentTableThe current 15 minute interval counts are in
this table.
This table provides per TDM PW performance information. SEQUENCE OF PrvtPwVcTDMPerfCurrentEntry .1.3.6.1.4.1.5205.2.200.2.1.5 |
prvtPwVcTDMPerfCurrentEntryAn entry in this table is created by the agent for every
prvtPwVcTDM entry. After 15 minutes, the contents of this table
entry are copied to a new entry in the prvtPwVcTDMPerfInterval
table and the counts in this entry are reset to zero. PrvtPwVcTDMPerfCurrentEntry .1.3.6.1.4.1.5205.2.200.2.1.5.1 |
prvtPwVcTDMPerfCurrentPktsOoseqNumber of packets detected out of sequence (via TDM
header sequence numbers), but successfully re-ordered.
Note: some implementations may not support this
Feature.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.5.1.1 |
prvtPwVcTDMPerfCurrentJtrBfrUnderrunsNumber of times a packet needed to be played
out and the jitter buffer was empty.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.5.1.2 |
prvtPwVcTDMPerfCurrentJtrBfrOverrunsNumber of packets detected out of range (via TDM
header sequence numbers), and could not be re-
ordered, or could not fit in the jitter buffer.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.5.1.3 |
prvtPwVcTDMPerfCurrentMalformedPktNumber of packets detected with unexpected size, or
bad headers' stackro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.5.1.4 |
prvtPwVcTDMPerfCurrentNearEndFCNumber of local packet failures.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.5.1.5 |
prvtPwVcTDMPerfCurrentFarEndFCNumber of remote packet failures.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.5.1.6 |
prvtPwVcTDMPerfIntervalTableThis table provides performance information per TDM PW
similar to the prvtPwVcTDMPerfCurrentTable above. However,
these counts represent historical 15 minute intervals.
Typically, this table will have a maximum of 96 entries
for a 24 hour period, but is not limited to this. SEQUENCE OF PrvtPwVcTDMPerfIntervalEntry .1.3.6.1.4.1.5205.2.200.2.1.6 |
prvtPwVcTDMPerfIntervalEntryAn entry in this table is created by the agent for
every prvtPwVcTDMPerfCurrentEntry that is 15 minutes old.
The contents of the Current entry are copied to the new
entry here. The Current entry, then resets its counts
to zero for the next current 15 minute interval. PrvtPwVcTDMPerfIntervalEntry .1.3.6.1.4.1.5205.2.200.2.1.6.1 |
prvtPwVcTDMPerfIntervalNumberA number (normally between 1 and 96 to cover a 24 hour
period) which identifies the interval for which the set
of statistics is available. The interval identified by 1
is the most recently completed 15 minute interval, and
the interval identified by N is the interval immediately
preceding the one identified by N-1. The minimum range of
N is 1 through 4. The default range is 1 through 32. The
maximum value of N is 1 through 96. Unsigned32 .1.3.6.1.4.1.5205.2.200.2.1.6.1.1 |
prvtPwVcTDMPerfIntervalValidDataThis variable indicates if the data for this interval
is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5205.2.200.2.1.6.1.2 |
prvtPwVcTDMPerfIntervalDurationThe duration of a particular interval in seconds,
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore this actual interval value
is provided.ro Integer32 .1.3.6.1.4.1.5205.2.200.2.1.6.1.3 |
prvtPwVcTDMPerfIntervalPktsOoseqNumber of packets detected out of sequence (via TDM
header sequence numbers), but successfully re-ordered.
Note: some implementations mat not support this
feature.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.6.1.4 |
prvtPwVcTDMPerfIntervalJtrBfrUnderrunsNumber of times a packet needed to be played
out and the jitter buffer was empty.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.6.1.5 |
prvtPwVcTDMPerfIntervalJtrBfrOverrunsNumber of packets detected out of range (via TDM
header sequence numbers), and could not be re-
ordered, or could not fit in the jitter buffer.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.6.1.6 |
prvtPwVcTDMPerfIntervalMalformedPktNumber of packets detected with unexpected size, or
bad headers' stackro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.6.1.7 |
prvtPwVcTDMPerfIntervalNearEndFCNumber of local packet failures.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.6.1.8 |
prvtPwVcTDMPerfIntervalFarEndFCNumber of remote packet failures.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.6.1.9 |
prvtPwVcTDMPerfTableThis table provides performance information per TDM PW
similar to the prvtPwVcTDMPerfIntervalTable above. However,
these counters represent complete historical information. SEQUENCE OF PrvtPwVcTDMPerfEntry .1.3.6.1.4.1.5205.2.200.2.1.7 |
prvtPwVcTDMPerfEntryAn entry is created in this table by the agent for
every entry in the prvtPwVcTDM table. PrvtPwVcTDMPerfEntry .1.3.6.1.4.1.5205.2.200.2.1.7.1 |
prvtPwVcTDMPerfPktsOoseqNumber of packets detected out of sequence (via TDM
header sequence numbers), but successfully re-ordered.
Note: some implementations may not support this
feature.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.7.1.1 |
prvtPwVcTDMPerfJtrBfrUnderrunsNumber of times a packet needed to be played
out and the jitter buffer was empty.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.7.1.2 |
prvtPwVcTDMPerfJtrBfrOverrunsNumber of packets detected out of range (via TDM
header sequence numbers), and could not be re-
ordered, or could not fit in the jitter buffer.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.7.1.3 |
prvtPwVcTDMPerfMalformedPktNumber of packets detected with unexpected size, or
bad headers' stack.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.7.1.4 |
prvtPwVcTDMPerfDiscontinuityTimeThe value of sysUpTime on the most recent occasion at
which any one or more of this segment's Counter32
suffered a discontinuity. If no such
discontinuities have occurred since the last re-
initialization of the local management subsystem, then
this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5205.2.200.2.1.7.1.5 |
prvtPwVcTDMPerfNearEndFCNumber of local packet failures.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.7.1.6 |
prvtPwVcTDMPerfFarEndFCNumber of remote packet failures.ro Counter32 .1.3.6.1.4.1.5205.2.200.2.1.7.1.7 |
prvtPwVcTDMAlarmTableThis table contains object for configuring and displaying CES Circuits TCA thresholds. SEQUENCE OF PrvtPwVcTDMAlarmEntry .1.3.6.1.4.1.5205.2.200.2.1.8 |
prvtPwVcTDMAlarmEntry PrvtPwVcTDMAlarmEntry .1.3.6.1.4.1.5205.2.200.2.1.8.1 |
prvtPwVcTDMAlarmIndexAn integer uniquely identifying an alarm entry. Gauge32 .1.3.6.1.4.1.5205.2.200.2.1.8.1.1 |
prvtPwVcTDMAlarmVariableThe OID of the variable whose value is being monitored. Depending on the time interval,
the error condition and the modue and circuit ID, this points to an object from an entry in
prvtPwVcTDMPerfCurrentTable or prvtPwVcTDMPerfTable.ro OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.200.2.1.8.1.2 |
prvtPwVcTDMAlarmThresholdThe alarm condition threshold for this alarm entry. The alarm is triggered if the value of the
object pointed by prvtPwVcTDMAlarmVariable remains above this threshold for more than 3 seconds.rw INTEGER .1.3.6.1.4.1.5205.2.200.2.1.8.1.3 |
prvtPwVcTDMAlarmValueThe value of the object pointed to by prvtPwVcTDMAlarmVariable, present for notification purposes.ro INTEGER .1.3.6.1.4.1.5205.2.200.2.1.8.1.4 |
prvtPwVcTDMTraps OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.200.2.2 |
prvtPwVcTDMAlarmThis notification is sent when the value of a TDM port error condition statistic has exceeded the
configured threshold, or the value has dropped back below the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.200.2.2.1 |
prvtPwVcTDMStatusChangeThis notification is sent when the operational or administrative status of circuit changes. NOTIFICATION-TYPE .1.3.6.1.4.1.5205.2.200.2.2.2 |
prvtPwVcTDMConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.200.2.3 |
prvtPwVcTDMGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.200.2.3.1 |
prvtPwVcTDMCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5205.2.200.2.3.2 |