PANDATEL-FXG-MODEM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for PANDATEL-FXG-MODEM-MIB.
16
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
fxg OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.506 |
fxgModemTableThe table of all FX-G modems in this housing. SEQUENCE OF FxgTableEntry .1.3.6.1.4.1.760.1.1.2.1.10.506.1 |
fxgTableEntryThe index of the table. FxgTableEntry .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1 |
mdmRackThe index of the rack where the modem is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.1 |
mdmModemThis variable displays the slot number where the
corresponding modem is installed in the rack.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.2 |
mdmPositionThis variable displays the location of the corresponding
modem: 'local' or 'remote'.
The modem which is plugged into a managed rack is 'local',
the counterpart is 'remote'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.3 |
mdmModemNameA verbal name of this modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.5 |
mdmAlarmThe status of local alarm: 'off' or 'on'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.15 |
mdmRemoteAccessModeThe possibility of remote management: 'enabled', 'disabled local'
or 'disable local and remote'.
Once disabled management at local and remote unit, it is not possible
to enable it at the remote unit again.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.64 |
mdmForcedRemoteAccessActivation of remote management: 'on' or 'off'.
Status 'on' enables management of remote unit. During this
process the link is restricted to management data. The
transmission of user data is interrupted.
Status 'off' disables management of remote unit. The link
transmits user data.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.65 |
mdmClockRecoveryThe clock recovery and data retiming at interface and line port.
The remote unit's configuration changes simultaneously.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.70 |
mdmOperationModeThe possibility of operation mode: 'converter mode' or 'modem mode'.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.72 |
mdmInterfaceAlarmConditionThe alarm trigger mode at interface port: 'disable', i.e. no alarm
is triggered, 'no-link-signal', i.e. an alarm is triggered if
the link is down.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.98 |
mdmLineAlarmConditionThe alarm trigger mode at line port: 'disable', i.e. no alarm
is triggered, 'no-link-signal', i.e. an alarm is triggered if
the link is down.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.99 |
fxg-modem OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.506 |
RFC1213-MIB Unknown .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.506 |