PANDATEL-GMF-MODEM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for PANDATEL-GMF-MODEM-MIB.
29
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
gmf OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.202 |
gmfModemTableThis table contains information about all GM-F converters in all racks. SEQUENCE OF GmfTableEntry .1.3.6.1.4.1.760.1.1.2.1.10.202.1 |
gmfTableEntryThe index of the table. GmfTableEntry .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1 |
mdmRackThe index of the rack where the converter is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.1 |
mdmModemThis entry displays the slot number where the corresponding
converter is installed in the rack.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.2 |
mdmPositionThis entry displays the location of the corresponding
converter: 'local' or 'remote'. The converter which is plugged
into a managed rack is 'local', the counterpart is 'remote'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.3 |
mdmModemNameThe verbal name of this converter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.5 |
mdmInterfaceEmulationModeInterface mode of the unit: 'dte', 'dce', 'te' or 'nt'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.6 |
mdmModemPropertyThis entry displays the speed class of the GM-F: 'e1' or 't1'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.7 |
mdmLineEmulationModeLine mode of the unit: 'te' or 'nt'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.8 |
mdmClockSystemThe clock system of the link: 'dual' or 'single'.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.23 |
mdmClockSourceThe clock source of the link: 'internal', 'external', or
'remote'.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.24 |
mdmDataRateThe data rate at the interface in bits per seconds. The data
rate at the remote counterpart changes simultaneously. A data
rate of 2.048 Mbps (E1) automatically disables CRC4, sets
mdmStartTimeslot to 'unframed', enables time slot 16, and disables
remote access. A data rate of 1.984 Mbps (E1) automatically sets
mdmStartTimeslot to 'timeslot-1', enables time slot 16 and sets
mdmRemoteAccessMode to 'via timeslot 0 sa4-bit'. A data rate of
1.544 Mbps (T1) automatically sets mdmStartTimeslot to 'unframed'
and disables remote access.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.25 |
mdmStartTimeslotThis entry determines the start time slot for framing. Start
time slot and data rate must match. A start time slot which
is too high will be ignored. The remote unit's configuration
changes simultaneously.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.26 |
mdmTimeslotSizeThis entry determines the size of the time slots: 'nx64k' or
'nx56k'. 'nx56k' is valid for T1 units only. The remote unit's configuration
changes simultaneously.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.27 |
mdmTimeslot16This entry enables or disables time slot 16. If it is disabled,
it will not be used for data transmission but for framing. Valid
for E1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.40 |
mdmCRC4GenerationThis entry enables or disables the generation of a CRC4 check
sum. Valid for E1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.41 |
mdmFramingModeThe T1 framing mode: 'd4' or 'esf'. The remote unit's
configuration changes simultaneously.
Valid for T1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.50 |
mdmCodingModeThe T1 coding mode: 'ami' or 'b8zs'. The remote unit's
configuration changes simultaneously.
Valid for T1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.51 |
mdmScramblerThis entry enables or disables scrambling.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.63 |
mdmRemoteAccessModeThe remote access mode: 'disable', 'via-next-free-timeslot',
'via-timeslot-0-Sa4-bit', or 'via-unframed-line'. The value
'via-next-free-timeslot' means that one time slot higher than the last
data time slot is used for remote access. The value 'via-timeslot-0-Sa4-bit'
means that the sa4-bit in time slot 0 is used for remote access
(for E1 units only). The value 'via-unframed-line' is valied for data rates of
2048 Kbps (E1) or 1544 Kbps (T1) only. With a data rate of 1536 Kbps (T1).
remote management is not available. The remote unit's configuration changes
simultaneously.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.64 |
mdmForcedRemoteAccessValid if 'mdmRemoteAccessMode' is set to 'via-unframed-line'.
Activation of remote management: 'on' or 'off'.
Status 'on' enables management of remote unit. During this
process the link is restricted to management data. The
transmission of user data is interrupted.
Status 'off' disables management of remote unit. The link
transmits user data.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.65 |
mdmTDPhaseLockingThis entry defines the data phase locking for I/F data:
'positive-clock-slope' or 'negative-clock-slope'.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.67 |
mdmLineBuiltOutThe T1 transmission mode of the unit. Valid for T1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.68 |
mdmCRC6TestThis entry enables the execution of a CRC6 test. Write requests
with values other than 'start' or 'stop' will be rejected. Valid
for T1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.100 |
mdmCRC6StatusThis entry indicates the status of the CRC6 test.
Valid for T1 units only.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.101 |
mdmCRC6ErrorThis entry indicates the number of errors detected during
the last 60 seconds.ro Gauge .1.3.6.1.4.1.760.1.1.2.1.10.202.1.1.102 |
gmf-modem OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.202 |
RFC1213-MIB Unknown .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.202 |