Home/Catalog/PANDATEL-FME-MODEM-MIB

PANDATEL-FME-MODEM-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for PANDATEL-FME-MODEM-MIB.

Objects

Active

Status

Dependencies

Imported Objects

Objects

26 total

Object Name	Syntax	OID
fme OBJECT IDENTIFIER `.1.3.6.1.4.1.760.1.1.2.1.10.601`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.760.1.1.2.1.10.601`
fmeModemTableThis table contains information about all FME units within all stacks. SEQUENCE OF FmeTableEntry `.1.3.6.1.4.1.760.1.1.2.1.10.601.1`	SEQUENCE OF FmeTableEntry	`.1.3.6.1.4.1.760.1.1.2.1.10.601.1`
fmeTableEntryThe index of the table. FmeTableEntry `.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1`	FmeTableEntry	`.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1`
mdmRackThe index of the stack the unit belongs to. The stack corresponds to a rack, the FME units correspond to rack mount cards installed in a rack.ro INTEGER `.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.1`	INTEGER	`.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.1`
mdmModemThis entry displays the index of the FME unit. It corresponds with its position in the stack.ro INTEGER `.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.2`	INTEGER	`.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.2`
mdmPositionThis entry displays the location of the corresponding unit: 'local' or 'remote'. The unit which belongs to a managed stack is 'local', the counterpart is 'remote'.ro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.3`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.3`
mdmModemNameThe verbal name of this unit.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.5`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.5`
mdmActiveLinkThis entry displays the line port that is receiving data.ro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.12`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.12`
mdmAlarmConditionPort7The alarm trigger mode at port 7: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e. an alarm is triggered if the laser diode is defective, or 'no-link-signal-or-laser-fail', i.e. the link is down or the laser diode is defective.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.116`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.116`
mdmAlarmConditionPort8The alarm trigger mode at port 8: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e. an alarm is triggered if the laser diode is defective, or 'no-link-signal-or-laser-fail', i.e. the link is down or the laser diode is defective.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.117`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.1.1.117`
fmePortTableThis table contains information about all I/F ports of the FME units within all stacks. SEQUENCE OF FmeTableEntry `.1.3.6.1.4.1.760.1.1.2.1.10.601.2`	SEQUENCE OF FmeTableEntry	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2`
fmePortEntryThe index of the table. FmeTableEntry `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1`	FmeTableEntry	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1`
portRackThe index of the stack the port belongs to.ro INTEGER `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.1`	INTEGER	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.1`
portModemThe index of the FME unit the port belongs to.ro INTEGER `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.2`	INTEGER	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.2`
portPositionThis entry displays the location of the corresponding port: 'local' or 'remote'. The port which belongs to a managed stack is 'local', the counterpart is 'remote'.ro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.3`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.3`
portPortThe index of the port.ro INTEGER `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.4`	INTEGER	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.4`
portInterfaceEmulationModeInterface mode of the port: 'dte', 'dce', 'te', or 'nt'.ro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.6`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.6`
mdmModemPropertyThe speed class of the port: 'e1' or 't1'.ro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.7`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.7`
portClockSystemThe clock system at the interface port: 'single' or 'dual'. The available values depend on the interface type.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.23`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.23`
portClockSourceThe clock source at the interface port: 'internal', 'remote', or 'external'.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.24`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.24`
portDataRateThe data rate at the interface port in bits per seconds. The data rate at the remote counterpart changes simultaneously.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.25`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.25`
portLocalCarrierDetectThe data carrier detect mode at the interface: if set to 'fo-link-and-remote-handshake' the DCD signal (resp. I for X.21, etc.) follows link status and remote RTS (resp. C for X.21, etc.), if set to 'fo-link' the DCD signal follows link status only. Not available for units with G.703 onboard.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.60`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.60`
portTDPhaseLockingThis entry defines the data phase locking for I/F data: 'positive-clock-slope' or 'negative-clock-slope'. For units with G.703 onboard the value 'positive-clock-slope' is valid only.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.67`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.67`
portLineBuiltOutThe G.703 transmission mode of the unit. Valid for units with G.703 onboard only.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.68`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.601.2.1.68`
fme-modem OBJECT IDENTIFIER `.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.601`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.601`
RFC1213-MIB Unknown `.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.601`	Unknown	`.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.601`