PANDATEL-MODEM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for PANDATEL-MODEM-MIB.
200
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
200 total| Object Name |
|---|
pandatel OBJECT IDENTIFIER .1.3.6.1.4.1.760 |
RFC1213-MIB Unknown .1.3.6.1.4.1.760 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.760.1 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1 |
wan-products OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2 |
mdm-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1 |
rackAddedThis trap will be sent when a rack is
added to the managed chassis.
The rack index of the new rack is sent along with
this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.1 |
rackRemovedThis trap will be sent when a rack is
removed from the managed chassis.
The rack index of the removed rack is sent along
with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.2 |
modemAddedThis trap will be sent when a modem is added.
The rack number and the index of the new modem is sent
along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.3 |
modemRemovedThis trap will be sent when a modem in one
of the slots is removed.
The rack number and the index of the removed modem is
sent along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.4 |
portLoopEnabledThis trap will be sent when a modem in one
of the slots enables a Loop.
The rack number, index of the modem, and port number
is sent along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.5 |
portLoopDisabledThis trap will be sent when a modem in one
of the slots disables a Loop.
The rack number, index of the modem, and port number
is sent along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.6 |
portSignalStatusGoodThis will be sent when a
status signal of a modem port enters the 'good' status.
The rack number, index of the modem, and port number
is sent along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.7 |
portSignalStatusBadThis trap will be sent when a
status signal of a modem port enters the 'bad' status.
The rack number, index of the modem, and port number
is sent along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.8 |
portBackupEnabledThis trap will be sent when a modem in one of the slots
enters a backup status. The first port indicates the active
data port, the second the inactive port.
The rack number, index of the modem, and port number is
sent along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.9 |
portBackupDisabledThis trap will be sent when a modem in one of the slots
leaves a backup status. The first port indicates the active
data port, the second the inactive port.
The rack number, index of the modem, and port number is
sent along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.10 |
portBackupAvailableThis trap will be sent when a second link can be used as backup.
The rack number, index of the modem, and port number is
sent along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.11 |
portBackupNotAvailableThis trap will be sent when there is no second link available as backup.
The rack number, index of the modem, and port number is
sent along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.12 |
portDataPortChangedThis trap will be sent when the line port used for data transmission
is changed. The first port indicates the active
data port, the second the inactive port.
The rack number, index of the modem, and port number is
sent along with this trap. TRAP-TYPE .1.3.6.1.4.1.760.1.1.2.1.0.13 |
mdmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.1 |
mdmInstalledRacksThis is the number of currently installed modem racks.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.1.1 |
mdmInstalledModemsThis is the number of currently installed modemsro INTEGER .1.3.6.1.4.1.760.1.1.2.1.1.2 |
mdmLoopModeTrapsThis enables or disables traps generated by a Loop Mode
status change at any local modem port of one of the
installed modems (values: disable, enable).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.1.3 |
mdmCurrentDateThis indicate the current date as 'mm/dd/yy'.
The date will be used for local management.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.1.13 |
mdmCurrentTimeThis indicate the current time as 'hh:mm:ss'.
The time will be used for local management.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.1.14 |
mdmRackTableTable which contains information about the installed racks. SEQUENCE OF RackEntry .1.3.6.1.4.1.760.1.1.2.1.2 |
rackEntryThe index of the table. RackEntry .1.3.6.1.4.1.760.1.1.2.1.2.1 |
rackRackThe index of this particular modem rack in the stack.
The index of the rack which contains the agent should
have the number 1.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.2.1.1 |
rackTypeThis entry shows the type number of the rack.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.2.1.2 |
rackDescriptionA verbal description of the modem rack.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.2.1.3 |
rackModemSlotsThis entry shows the number of slots for modem cards in
the rack.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.2.1.4 |
rackModemsThis entry shows the number of modems currently installed
in the rack.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.2.1.5 |
rackPowerSupplySlotsThis entry shows the number of slots for power supplies in
the rack.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.2.1.6 |
rackPowerSuppliesThis entry shows the number of power supplies currently installed
in the rack.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.2.1.7 |
mdmModemTableTable which contains general information about the installed
modems. SEQUENCE OF ModemEntry .1.3.6.1.4.1.760.1.1.2.1.3 |
modemEntryThe index of the table. ModemEntry .1.3.6.1.4.1.760.1.1.2.1.3.1 |
mdmRackThe index of the rack where the modem is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.3.1.1 |
mdmModemThe index of this particular modem in the rack. The value
corresponds with the slot where the modem is inserted.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.3.1.2 |
mdmDescriptionA verbal description of the modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.3.1.3 |
mdmUserNameA verbal description of the modem which can be changed
by the manager.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.3.1.4 |
mdmSelfTestThis entry enables the execution of a selftest. Write
requests with values other than 'start' or 'cancel' will be
rejected. The result will be found in mdmSelfTestResult.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.3.1.5 |
mdmSelfTestResultThis entry shows the result status of the last
modem-dependent self test. After start, the status may
change to 'running' before the first error that occured
is displayed. If no error was detected the status changes
to 'ok'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.3.1.6 |
mdmRemoteAccessStatusThis entry shows the access status to the remote counterpart
of the modem. The standard value depends on the device.
Some remote modems are always accessible, others are not
accessible or can be switched to both modes (see
'mdmForcedRemoteAccess' in the specific modem MIB).ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.3.1.7 |
mdmInterfacePortsThis entry indicates the number of interface ports of the
modem. An interface port connects an external device.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.3.1.8 |
mdmLinePortsThis entry indicates the number of line ports of the modem.
A line port connects a remote modem.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.3.1.9 |
mdmVerInfoTableTable which contains information about the installed
modems' versions. SEQUENCE OF VerInfoEntry .1.3.6.1.4.1.760.1.1.2.1.4 |
verInfoEntryThe index of the table. VerInfoEntry .1.3.6.1.4.1.760.1.1.2.1.4.1 |
viRackThe index of the rack where the modem is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.4.1.1 |
viModemThe index of this particular modem in the rack.
The value corresponds with the slot where the modem is
inserted.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.4.1.2 |
viTypeThis entry indicates the type of the modem.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.4.1.3 |
viFirmwVerThis entry indicates the firmware revision of the modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.4.1.4 |
viUnitRelThis entry indicates the hardware version and revision of
the modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.4.1.5 |
viArtNoThis entry indicates the article number of the modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.4.1.6 |
viFrontVerFor factory purposes only.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.4.1.7 |
viSerialNumberThis entry indicates the serial number of the modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.4.1.8 |
mdmPortTableTable which contains information about all ports. SEQUENCE OF PortEntry .1.3.6.1.4.1.760.1.1.2.1.5 |
portEntryThe index of the table. PortEntry .1.3.6.1.4.1.760.1.1.2.1.5.1 |
portRackThe index of the rack where the modem to which this port
belongs is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.5.1.1 |
portModemThe index of the modem to which this port belongs.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.5.1.2 |
portPortThe index of the port.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.5.1.3 |
portTypeThis entry indicates the type of the port.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.5.1.4 |
portInterfaceTypeThis entry indicates the type of interface of the port.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.5.1.5 |
portConnectorThis entry indicates the connector type of the port.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.5.1.6 |
portLoopModeThis entry indicates the loop mode of the port.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.5.1.7 |
mdmPortSignalTableTable which contains information about all port status
signals. SEQUENCE OF PortSignalEntry .1.3.6.1.4.1.760.1.1.2.1.6 |
portSignalEntryThe index of the table. PortSignalEntry .1.3.6.1.4.1.760.1.1.2.1.6.1 |
psignalRackThe index of the rack where the modem is installed
to which the port belongs that provides the signal.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.6.1.1 |
psignalModemThe index of the modem to which the port belongs that
provides the signal.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.6.1.2 |
psignalPortThe index of the port that provides the signal.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.6.1.3 |
psignalTypeThis entry indicates the signal type.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.6.1.4 |
psignalStatusThis entry indicates the current status of the signal.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.6.1.5 |
psignalTrapThis enables or disables traps. If Trap is enabled each
transition of the signal status may cause a trap
portSignalStatusGood/portSignalStatusBad.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.6.1.6 |
mdmBERTTableTable which contains information about all performable
bit error rate tests. SEQUENCE OF BERTEntry .1.3.6.1.4.1.760.1.1.2.1.7 |
bertEntryThe index of thetable. BERTEntry .1.3.6.1.4.1.760.1.1.2.1.7.1 |
bertRackThe index of the rack where the modem is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.7.1.1 |
bertModemThe index of this particular modem in the rack. The value
corresponds with the slot where the modem is inserted.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.7.1.2 |
bertPortThe index of the port where the BER test will be performed.
The modem can only perform one test at a time. The test can
only be performed on a subset of ports, usually the line
ports. Write requests with different port numbers will be
rejected. Write requests with valid line port numbers will
be rejected while the BER test is running.rw INTEGER .1.3.6.1.4.1.760.1.1.2.1.7.1.3 |
bertBERTestThis entry enables the execution of a BER test. Write
requests with values other than 'start' or 'stop' will be
rejected.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.7.1.4 |
bertStatusThis entry indicates the status of the BER test.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.7.1.5 |
bertRunTimeThis entry indicates the duration of the BER test in seconds.ro Counter .1.3.6.1.4.1.760.1.1.2.1.7.1.6 |
bertInErrorTimeThis entry shows the duration of erroneous test transmission
in seconds.ro Counter .1.3.6.1.4.1.760.1.1.2.1.7.1.7 |
bertErrorFreeTimeThis entry shows the duration of error-free test
transmission in seconds.ro Counter .1.3.6.1.4.1.760.1.1.2.1.7.1.8 |
bertKbitsRecWrappedThis is the number the bertKbitsReceived counter
has wrapped.ro Counter .1.3.6.1.4.1.760.1.1.2.1.7.1.9 |
bertKbitsReceivedThis entry indicates the number of Kbits received during
the test. When the counter wraps the bertKbitRecWrapped
increases by one.ro Counter .1.3.6.1.4.1.760.1.1.2.1.7.1.10 |
bertErrorsThis entry indicates the number of errors detected during
the test.ro Counter .1.3.6.1.4.1.760.1.1.2.1.7.1.11 |
bertSyncLostsThis entry indicates the number of pattern sync losts
detected during the test.ro Counter .1.3.6.1.4.1.760.1.1.2.1.7.1.12 |
bertSyncStatusThis entry indicates the current pattern sync status.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.7.1.13 |
bertBitErrorRateThis entry indicates the bit error rate. It is provided as
a string in the format 'd.ddE+/-dd'. Float scanf routines
are capable of interpreting the string in the correct
manner.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.7.1.14 |
mdmRemoteAccess OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.9 |
remModemTableTable which contains general information about all
counterparts of the installed modems. SEQUENCE OF RemModemEntry .1.3.6.1.4.1.760.1.1.2.1.9.3 |
rmodemEntryThe index of the table. RemModemEntry .1.3.6.1.4.1.760.1.1.2.1.9.3.1 |
rmdmRackThis entry indicates the index of the rack where the modem
is installed that the remote modem is linked to.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.3.1.1 |
rmdmModemThe index of the modem that the remote modem is linked to.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.3.1.2 |
rmdmDescriptionA verbal description of the remote modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.9.3.1.3 |
rmdmUserNameA verbal description of the remote modem which can be
changed by the manager.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.9.3.1.4 |
rmdmSelfTestThis entry enables the execution of a selftest. Write
requests with values other than 'start' or 'cancel' will be
rejected. The result will be found in SelfTestResult.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.3.1.5 |
rmdmSelfTestResultThis indicates the result status of the last modem-dependent
self test. After start, the status may change to 'running'
before the first error that occured displays. If no error was
detected the status changes to 'ok'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.3.1.6 |
rmdmRemoteAccessStatusThis entry shows the access status of the modem. The
standard value depends on the device. Some modems are always
accessible, others are not accessible or can be switched to
both modes (see 'mdmForcedRemoteAccess' in the specific
modem MIB).ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.3.1.7 |
rmdmInterfacePortsThis entry indicates the number of interface ports of the
remote modem. An interface port connects an external device.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.3.1.8 |
rmdmLinePortsThis entry indicates the number of line ports of the modem.
A line port connects the local counterpart of the remote modem.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.3.1.9 |
remVerInfoTableTable which contains information about the remote modems'
versions. SEQUENCE OF RemVerInfoEntry .1.3.6.1.4.1.760.1.1.2.1.9.4 |
remVerInfoEntryThe index of the table. RemVerInfoEntry .1.3.6.1.4.1.760.1.1.2.1.9.4.1 |
rviRackThe index of the rack where the modem is installed that the
remote modem is linked to.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.4.1.1 |
rviModemThe index of the modem that the remote modem is linked to.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.4.1.2 |
rviTypeThis entry indicates the type of the remote modem.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.4.1.3 |
rviFirmwVerThis entry indicates the firmware revision of the remote
modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.9.4.1.4 |
rviUnitRelThis entry indicates the hardware version and revision of
the remote modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.9.4.1.5 |
rviArtNoThis entry indicates the article number of the remote modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.9.4.1.6 |
rviFrontVerFor factory purposes only.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.4.1.7 |
rviSerialNumberThis entry indicates the serial number of the remote modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.9.4.1.8 |
remPortTableTable which contains information about all ports of the
remote modem. SEQUENCE OF RemPortEntry .1.3.6.1.4.1.760.1.1.2.1.9.5 |
remPortEntryThe index of the table. RemPortEntry .1.3.6.1.4.1.760.1.1.2.1.9.5.1 |
rportRackThe index of the rack where the local counterpart of the
remote modem is installed to which this port belongs.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.5.1.1 |
rportModemThe index of the local counterpart of the remote modem to
which this port belongs.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.5.1.2 |
rportPortThe index of the port.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.5.1.3 |
rportTypeThis entry indicates the type of the port.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.5.1.4 |
rportInterfaceTypeThis entry indicates the type of interface of the port.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.5.1.5 |
rportConnectorThis entry indicates the connector type of the port.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.5.1.6 |
rportLoopModeThis entry indicates the loop mode of the port (remote,
digital, line, off).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.5.1.7 |
remPortSignalTableTable which contains information about all port status
signals. SEQUENCE OF RemPortSignalEntry .1.3.6.1.4.1.760.1.1.2.1.9.6 |
remPortSignalEntryThe index of the table. RemPortSignalEntry .1.3.6.1.4.1.760.1.1.2.1.9.6.1 |
rpsignalRackThe index of the rack where the local counterpart of the
remote modem is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.6.1.1 |
rpsignalModemThe index of the local counterpart of the remote modem.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.6.1.2 |
rpsignalPortThe index of the port at the remote modem that provides the
signal.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.9.6.1.3 |
rpsignalTypeThis entry indicates the signal type.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.6.1.4 |
rpsignalStatusThis entry indicates the current status of the signal.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.9.6.1.5 |
mdmSpecifics OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10 |
mdm-oid OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000 |
comp-id OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1 |
rack-other OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.1 |
rack-10s-3hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.2 |
rack-12s-3hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.3 |
rack-10s-6hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.4 |
rack-6s-9s-6hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.5 |
device-stack-15s OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.6 |
rack-8s-4hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.7 |
rack-10s-2c-6hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.8 |
hs-rack-10s-3hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.9 |
rack-8s-2c-6hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.10 |
hs-rack-3s-1c-3hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.11 |
rack-1s-1c-1hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.12 |
rack-3s-1c-1hu OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.1.13 |
device-id OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.2 |
otherModem OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.1 |
cms-snmp-master OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10001 |
cms-slave OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10002 |
cms-intelligent-slave OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10003 |
rc-control OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10004 |
slot-id OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.3 |
modemSlot OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.3.1 |
mgmtSlot OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.3.2 |
modemAddr OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.3.3 |
mgmtAddr OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.3.4 |
wdmSlot OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.3.5 |
controlSlot OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.3.6 |
psupplySlot OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.3.10 |
port-id OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.4 |
otherPort OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.4.1 |
interfacePort OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.4.2 |
linePort OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.4.3 |
vt100mgmtPort OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.4.4 |
outbandmgmtPort OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.4.5 |
backupPort OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.4.6 |
rs485Port OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.4.7 |
psupply-id OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5 |
ps-other OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.1 |
p-ac-x-5v-20a OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.2 |
p-ac-x-5v-30a OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.3 |
p-dc-48v-5v-18a OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.4 |
p-dc-24v-5v-15a OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.5 |
p-dc-48v-5v-30a OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.6 |
b-ac-x-5v-6a OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.7 |
b-dc-48v-5v-lc OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.8 |
b-dc-48v-5v-hc OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.9 |
b-dc-24v-5v-su OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.10 |
p-ac-x-3v-20a OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.11 |
p-dc-48v-5v-20a OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.12 |
p-dc-5v-3v-4a OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.13 |
p-dc-5v-5v-5a OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.5.14 |
psonoff-id OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.6 |
pS1-PS2-other OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.6.1 |
pS1-on-PS2-off OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.6.2 |
pS1-on-PS2-on OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.6.3 |
fanonoff-id OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.7 |
fAN1-FAN2-other OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.7.1 |
fAN1-off-FAN2-off OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.7.2 |
fAN1-on-FAN2-off OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.7.3 |
fAN1-off-FAN2-on OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.7.4 |
fAN1-on-FAN2-on OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.7.5 |
mdmMgmtIfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.20 |
mdmIfTypeThis variable shows the agent's interface type.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.20.1 |
mdmIfProtocolThis variable shows the agent's protocol type.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.20.2 |
mdmIfDataRateThis variable shows the agent's data rate in bps.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.20.3 |
mdmIfDialEnableThis variable enables the initialization of a dial modem in
case of alarm. The following variables (5 to 10) are active
only if this variable is enabled.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.20.4 |
mdmIfInitStringThis variable defines an init string which is generated in
case of alarm to configure an external Hayes compatible
modem.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.20.5 |
mdmIfDialStringThis variable defines a modem command which is generated in
case of alarm to dial-up a remote NMS station. If the dial
string is not defined neither the init string nor the dial
string is generated.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.20.6 |
mdmIfSendTTLThis variable defines the TTL (time to live) in seconds.
After that time the generated traps will be deleted from
the buffer. If the value is '0' the traps will remain in the
buffer.rw INTEGER .1.3.6.1.4.1.760.1.1.2.1.20.7 |
mdmIfDialTimeoutThis variable defines a dial timeout for the modem in
seconds.rw INTEGER .1.3.6.1.4.1.760.1.1.2.1.20.8 |
mdmIfRedialPauseThis variable defines the duration of a redial pause in
seconds.rw INTEGER .1.3.6.1.4.1.760.1.1.2.1.20.9 |
mdmIfIdlePeriodBeforeDisconnectThis variable defines the period of time before
disconnecting in seconds. If the value is '0' the modem will
remain connected.rw INTEGER .1.3.6.1.4.1.760.1.1.2.1.20.10 |