PANDATEL-INAX-MODEM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for PANDATEL-INAX-MODEM-MIB.
75
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
75 total| Object Name |
|---|
inax OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.701 |
inaxModemTableThis table contains information about all INAX units in all racks. SEQUENCE OF InaxTableEntry .1.3.6.1.4.1.760.1.1.2.1.10.701.1 |
inaxTableEntryThe index of the table. InaxTableEntry .1.3.6.1.4.1.760.1.1.2.1.10.701.1.1 |
mdmRackThe index of the rack where the unit is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.1 |
mdmModemThis entry displays the slot number where the corresponding
unit is installed in the rack.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.2 |
mdmPositionThis entry displays the location of the corresponding unit:
'local' or 'remote'. The unit which is plugged into a managed
rack is 'local', the counterpart is 'remote'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.3 |
mdmModemNameThe verbal name of this unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.5 |
mdmModemPropertyThe speed class of the unit: 'e1' or 't1'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.7 |
mdmActiveLinkThis entry displays the line port that is receiving data.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.12 |
mdmRemoteAccessModeThis entry defines the time slot assigned for remote management.
Remote management is realized via port 5 always. For T1 units
24 time slots are available only. The remote unit's
configuration changes simultaneously.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.64 |
inaxIFPortTableThis table contains information about all I/F ports of the
INAX units in all racks. SEQUENCE OF InaxIFPortEntry .1.3.6.1.4.1.760.1.1.2.1.10.701.2 |
inaxIFPortEntryThe index of the table. InaxIFPortEntry .1.3.6.1.4.1.760.1.1.2.1.10.701.2.1 |
iportRackThe index of the rack where the unit is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.1 |
iportModemThe index of the INAX unit the port belongs to.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.2 |
iportPositionThis entry displays the location of the corresponding port:
'local' or 'remote'. The port which is plugged into a managed
rack is 'local', the counterpart is 'remote'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.3 |
iportPortThe index of the port.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.4 |
iportDataEmulationModeInterface mode of the port: 'dte', 'dce', 'te', or 'nt'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.6 |
iportDataRateThe data rate at the interface port in bits per seconds.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.25 |
iportTimeslotSizeThis entry determines the size of the time slots: 'nx64k' or
'nx56k'. 'nx56k' is valid for T1 units only. The remote unit's configuration
changes simultaneously.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.27 |
inaxLinePortTableThis table contains information about all line ports of the
INAX units in all racks. SEQUENCE OF InaxLinePortEntry .1.3.6.1.4.1.760.1.1.2.1.10.701.3 |
inaxLinePortEntryThe index of the table. InaxLinePortEntry .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1 |
lportRackThe index of the rack where the unit is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.1 |
lportModemThe index of the INAX unit the port belongs to.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.2 |
lportPositionThis entry displays the location of the corresponding port:
'local' or 'remote'. The port which is plugged into a managed
rack is 'local', the counterpart is 'remote'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.3 |
lportPortThe index of the port.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.4 |
lportDataEmulationModeInterface mode of the port: 'te' or 'nt'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.6 |
lportClockSourceThe clock source: 'internal' or 'remote'. Port 4 can only
be set to 'internal'.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.24 |
lportDataRateThe data rate at the line port in bits per seconds.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.25 |
lportCRC4GenerationThis entry enables or disables the generation of a CRC4 check
sum. The remote unit's configuration changes
simultaneously. Valid for E1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.41 |
lportFramingModeThe T1 framing mode: 'd4' or 'esf'. The remote
unit's configuration changes simultaneously.
Valid for T1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.50 |
lportCodingModeThe T1 coding mode at port 4: 'ami' or 'b8zs'. The remote
unit's configuration changes simultaneously.
Valid for T1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.51 |
lportLineBuiltOutThe G.703 transmission mode of the unit.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.68 |
lportPortModeThe operation mode at port 4: 'interface-mode', 'backup-mode',
or 'link-mode'.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.69 |
lportCRC6TestThis entry enables the execution of a CRC6 test. Write requests
with values other than 'start' or 'stop' will be rejected. Valid
for T1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.100 |
lportCRC6StatusThis entry indicates the status of the CRC6 test.
Valid for T1 units only.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.101 |
lportCRC6ErrorThis entry indicates the number of errors detected during
the last 60 seconds.ro Gauge .1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.102 |
inaxTimeslotTableThis table contains information about all line ports of the
INAX units in all racks. SEQUENCE OF InaxTimeslotEntry .1.3.6.1.4.1.760.1.1.2.1.10.701.4 |
inaxTimeslotEntryThe index of the table. InaxTimeslotEntry .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1 |
tsRackThe index of the rack where the unit is installed.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.1 |
tsModemThe index of the INAX unit the port belongs to.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.2 |
tsPositionThis entry displays the location of the corresponding port:
'local' or 'remote'. The port which is plugged into a managed
rack is 'local', the counterpart is 'remote'.ro Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.3 |
tsPortThe index of the port.ro INTEGER .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.4 |
tsTimeslot1This entry defines the port number used for the transmission
of time slot 1. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.301 |
tsTimeslot2This entry defines the port number used for the transmission
of time slot 2. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.302 |
tsTimeslot3This entry defines the port number used for the transmission
of time slot 3. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.303 |
tsTimeslot4This entry defines the port number used for the transmission
of time slot 4. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.304 |
tsTimeslot5This entry defines the port number used for the transmission
of time slot 5. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.305 |
tsTimeslot6This entry defines the port number used for the transmission
of time slot 6. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.306 |
tsTimeslot7This entry defines the port number used for the transmission
of time slot 7. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.307 |
tsTimeslot8This entry defines the port number used for the transmission
of time slot 8. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.308 |
tsTimeslot9This entry defines the port number used for the transmission
of time slot 9. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.309 |
tsTimeslot10This entry defines the port number used for the transmission
of time slot 10. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.310 |
tsTimeslot11This entry defines the port number used for the transmission
of time slot 11. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.311 |
tsTimeslot12This entry defines the port number used for the transmission
of time slot 12. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.312 |
tsTimeslot13This entry defines the port number used for the transmission
of time slot 13. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.313 |
tsTimeslot14This entry defines the port number used for the transmission
of time slot 14. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.314 |
tsTimeslot15This entry defines the port number used for the transmission
of time slot 15. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.315 |
tsTimeslot16This entry defines the port number used for the transmission
of time slot 16. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.316 |
tsTimeslot17This entry defines the port number used for the transmission
of time slot 17. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.317 |
tsTimeslot18This entry defines the port number used for the transmission
of time slot 18. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.318 |
tsTimeslot19This entry defines the port number used for the transmission
of time slot 19. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.319 |
tsTimeslot20This entry defines the port number used for the transmission
of time slot 20. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.320 |
tsTimeslot21This entry defines the port number used for the transmission
of time slot 21. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.321 |
tsTimeslot22This entry defines the port number used for the transmission
of time slot 22. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.322 |
tsTimeslot23This entry defines the port number used for the transmission
of time slot 23. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.323 |
tsTimeslot24This entry defines the port number used for the transmission
of time slot 24. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode).rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.324 |
tsTimeslot25This entry defines the port number used for the transmission
of time slot 25. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode). Valid for E1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.325 |
tsTimeslot26This entry defines the port number used for the transmission
of time slot 26. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode). Valid for E1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.326 |
tsTimeslot27This entry defines the port number used for the transmission
of time slot 27. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode). Valid for E1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.327 |
tsTimeslot28This entry defines the port number used for the transmission
of time slot 28. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode). Valid for E1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.328 |
tsTimeslot29This entry defines the port number used for the transmission
of time slot 29. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode). Valid for E1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.329 |
tsTimeslot30This entry defines the port number used for the transmission
of time slot 30. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode). Valid for E1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.330 |
tsTimeslot31This entry defines the port number used for the transmission
of time slot 31. 'port-4' is available only if IportPortmode is set
to 'interface-mode'. If the time slot is assigned for remote management
(see mdmRemoteAccessMode). Valid for E1 units only.rw Enumeration .1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.331 |
inax-modem OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.701 |
RFC1213-MIB Unknown .1.3.6.1.4.1.760.1.1.2.1.10.10000.2.701 |