Home/Catalog/PANDATEL-FX-MODEM-MIB

PANDATEL-FX-MODEM-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for PANDATEL-FX-MODEM-MIB.

Objects

Active

Status

Dependencies

Imported Objects

Objects

14 total

Object Name	Syntax	OID
fx OBJECT IDENTIFIER `.1.3.6.1.4.1.760.1.1.2.1.10.502`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.760.1.1.2.1.10.502`
fxModemTableThe table of all FX modems in this housing. SEQUENCE OF FxTableEntry `.1.3.6.1.4.1.760.1.1.2.1.10.502.1`	SEQUENCE OF FxTableEntry	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1`
fxTableEntryThe index of the table. FxTableEntry `.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1`	FxTableEntry	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1`
mdmRackThe index of the rack where the modem is installed.ro INTEGER `.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.1`	INTEGER	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.1`
mdmModemThis variable displays the slot number where the corresponding modem is installed in the rack.ro INTEGER `.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.2`	INTEGER	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.2`
mdmPositionThis variable displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart is 'remote'.ro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.3`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.3`
mdmModemNameA verbal name of this modem.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.5`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.5`
mdmRemoteAccessModeThe possibility of remote management: 'enabled' or 'disabled'. Once disabled remote management, it is not possible to enable it at the remote unit.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.64`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.64`
mdmForcedRemoteAccessActivation of remote management: 'on' or 'off'. Status 'on' enables management of remote unit. During this process the link is restricted to management data. The transmission of user data is interrupted. Status 'off' disables management of remote unit. The link transmits user data.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.65`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.65`
mdmClockRecoveryThe clock recovery and data retiming at interface and line port. The remote unit's configuration changes simultaneously.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.70`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.70`
mdmInterfaceAlarmConditionThe alarm trigger mode at interface port: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e. an alarm is triggered if the laser diode is defective, or 'no-link-signal-or-laser-fail', i.e. the link is down or the laser diode is defective.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.98`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.98`
mdmLineAlarmConditionThe alarm trigger mode at line port: 'disable', i.e. no alarm is triggered, 'link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e. an alarm is triggered if the laser diode is defective, or 'link-signal-or-laser-fail', i.e. the link is down or the laser diode is defective.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.99`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.99`
fx-modem OBJECT IDENTIFIER `.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.502`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.502`
RFC1213-MIB Unknown `.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.502`	Unknown	`.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.502`