Home/Catalog/PANDATEL-FHFLF-MODEM-MIB

PANDATEL-FHFLF-MODEM-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for PANDATEL-FHFLF-MODEM-MIB.

Objects

Active

Status

Dependencies

Imported Objects

Objects

24 total

Object Name	Syntax	OID
fhflf OBJECT IDENTIFIER `.1.3.6.1.4.1.760.1.1.2.1.10.102`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.760.1.1.2.1.10.102`
fhflfModemTableThis table contains information about all FH/FL-F modems in all racks. SEQUENCE OF FhflfTableEntry `.1.3.6.1.4.1.760.1.1.2.1.10.102.1`	SEQUENCE OF FhflfTableEntry	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1`
fhflfTableEntryThe index of the table. FhflfTableEntry `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1`	FhflfTableEntry	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1`
mdmRackThe index of the rack where the modem is installed.ro INTEGER `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.1`	INTEGER	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.1`
mdmModemThis entry displays the slot number where the corresponding modem is installed in the rack.ro INTEGER `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.2`	INTEGER	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.2`
mdmPositionThis entry displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart is 'remote'.ro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.3`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.3`
mdmModemNameThe verbal name of this modem.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.5`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.5`
mdmInterfaceEmulationModeInterface mode of the unit: 'dte', 'dce', 'te' or 'nt'.ro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.6`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.6`
mdmModemPropertyThis entry displays the speed class of the FH/FL-F: 'e1' or 't1'.ro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.7`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.7`
mdmClockSystemThe clock system of the link: 'dual' or 'single'.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.23`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.23`
mdmClockSourceThe clock source of the link: 'internal', 'external', or 'remote'.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.24`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.24`
mdmDataRateThe data rate at the interface in bits per seconds. The data rate at the remote counterpart changes simultaneously. A data rate of 2.048 Mbps (E1) automatically disables CRC4, sets mdmStartTimeslot to 'unframed', enables time slot 16. A data rate of 1.984 Mbps (E1) automatically sets mdmStartTimeslot to 'timeslot-1', enables time slot 16. A data rate of 1.544 Mbps (T1) automatically sets mdmStartTimeslot to 'unframed'.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.25`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.25`
mdmStartTimeslotThis entry determines the start time slot for framing. Start time slot and data rate must match. A start time slot which is too high will be ignored. The remote unit's configuration changes simultaneously.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.26`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.26`
mdmTimeslotSizeThis entry determines the size of the time slots: 'nx64k' or 'nx56k'. 'nx56k' is valid for T1 units only. The remote unit's configuration changes simultaneously.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.27`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.27`
mdmTimeslot16This entry enables or disables time slot 16. If it is disabled, it will not be used for data transmission but for framing. Valid for E1 units only.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.40`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.40`
mdmCRC4GenerationThis entry enables or disables the generation of a CRC4 check sum. The remote unit's configuration changes simultaneously. Valid for E1 units only.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.41`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.41`
mdmFramingModeThe T1 framing mode: 'd4' or 'esf'. The remote unit's configuration changes simultaneously. Valid for T1 units only.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.50`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.50`
mdmLocalCarrierDetectThe data carrier detect mode at the interface: if set to 'fo-link-and-remote-handshake' the DCD signal (resp. I for X.21, etc.) follows link status and remote RTS (resp. C for X.21, etc.), if set to 'fo-link' the DCD signal follows link status only.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.60`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.60`
mdmFOPowerThe fiber optic transmit power at the line portro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.71`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.71`
mdmCRC6TestThis entry enables the execution of a CRC6 test. Write requests with values other than 'start' or 'stop' will be rejected. Valid for T1 units only.rw Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.100`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.100`
mdmCRC6StatusThis entry indicates the status of the CRC6 test. Valid for T1 units only.ro Enumeration `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.101`	Enumeration	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.101`
mdmCRC6ErrorThis entry indicates the number of errors detected during the last 60 seconds.ro Gauge `.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.102`	Gauge	`.1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.102`
fhflf-modem OBJECT IDENTIFIER `.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.102`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.102`
RFC1213-MIB Unknown `.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.102`	Unknown	`.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.102`