Home/Catalog/PANDATEL-FHFL-MODEM-MIB

PANDATEL-FHFL-MODEM-MIB

AI MIB Summary

Standard SNMP MIB module defining data structures for PANDATEL-FHFL-MODEM-MIB.

15
Objects
Active
Status
4
Dependencies

Imported Objects

Objects

15 total
Object Name
fhfl
OBJECT IDENTIFIER
.1.3.6.1.4.1.760.1.1.2.1.10.101
fhflModemTableTable of all FH/FL modems in all racks.
SEQUENCE OF FhflTableEntry
.1.3.6.1.4.1.760.1.1.2.1.10.101.1
fhflTableEntryThe index of the table.
FhflTableEntry
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1
mdmRackThe index of the rack where the modem is installed.ro
INTEGER
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1.1
mdmModemThis variable displays the slot number where the corresponding modem is installed in the rack.ro
INTEGER
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1.2
mdmPositionThis variable displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart is 'remote'.ro
Enumeration
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1.3
mdmModemNameThe verbal name of this modem.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1.5
mdmInterfaceEmulationModeInterface mode of the unit: 'dte', 'dce', 'te', or 'nt'.ro
Enumeration
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1.6
mdmModemPropertyThe speed class of the unit: 'e1' or 't1'.ro
Enumeration
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1.7
mdmClockSystemThe clock system of the link: 'single' or 'dual'. The remote unit's configuration changes simultaneously.rw
Enumeration
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1.23
mdmClockSourceThe clock source of the link: 'internal', 'remote' or 'external'.rw
Enumeration
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1.24
mdmDataRateThe data rate at the interface in bits per seconds. The data rate at the remote counterpart changes simultaneously.rw
Enumeration
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1.25
mdmLocalCarrierDetectThe data carrier detect mode at the interface: if set to 'fo-link-and-remote-handshake' the DCD signal (resp. I for X.21, etc.) follows link status and remote RTS (resp. C for X.21, etc.), if set to 'fo-link' the DCD signal follows link status only.rw
Enumeration
.1.3.6.1.4.1.760.1.1.2.1.10.101.1.1.60
fhfl-modem
OBJECT IDENTIFIER
.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.101
RFC1213-MIB
Unknown
.1.3.6.1.4.1.760.1.1.2.1.10.10000.2.101
PANDATEL-FHFL-MODEM-MIB - SNMP MIB Reference | MIBs Explorer