PANDATEL-AGENT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for PANDATEL-AGENT-MIB.
22
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
pandatel OBJECT IDENTIFIER .1.3.6.1.4.1.760 |
RFC1213-MIB Unknown .1.3.6.1.4.1.760 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.760.1 |
agent OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.10000 |
agentGroup OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.10000.1 |
agentNetAddressThe administrative network address of this unit's
agent, e.g. the IP address.rw IpAddress .1.3.6.1.4.1.760.1.10000.1.1 |
agentSubnetMaskThe administrative SubNet mask of this unit's agent.rw IpAddress .1.3.6.1.4.1.760.1.10000.1.2 |
agentPhysAddressThe physical address of this unit's agent.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.760.1.10000.1.3 |
agentMgmtAccessModeThe mode this unit's agent can be reached.ro Enumeration .1.3.6.1.4.1.760.1.10000.1.4 |
agentHardwareRevisionThe hardware revision of this unit's agent.
This is intended to be of the type like 1.00a,
but can also contain any textual description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.10000.1.5 |
agentSoftwareRevisionThe software revision of this unit's agent.
This is intended to be of the type like 1.00a,
but can also contain any textual description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.10000.1.6 |
agentTrapReceiverTableThis entity's Trap Receiver Table. SEQUENCE OF AgentTrapReceiverTableEntry .1.3.6.1.4.1.760.1.10000.1.7 |
agTrapReceiverTableEntryOne entry in this entity's Trap Receiver Table,
consisting of the trap receiver's IP address
and the community string to be used with it. AgentTrapReceiverTableEntry .1.3.6.1.4.1.760.1.10000.1.7.1 |
agTrapReceiverNetAddressThe network address of this trap receiver, e.g.
the IP Address.rw IpAddress .1.3.6.1.4.1.760.1.10000.1.7.1.1 |
agTrapReceiverTrapCommunityThe community string used for traps to this receiver.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.10000.1.7.1.2 |
agTrapReceiverTypeAll entries return the value 1 (valid) for this
object.
Setting this object to the value 2 (invalid) deletes
the entry from the trap receiver table.rw Enumeration .1.3.6.1.4.1.760.1.10000.1.7.1.3 |
agentSecurityTableThis entity's Security Table. SEQUENCE OF AgentSecurityTableEntry .1.3.6.1.4.1.760.1.10000.1.8 |
agSecTableEntryOne entry in this entity's security table,
consisting of the security level and the
community string to be used with it. AgentSecurityTableEntry .1.3.6.1.4.1.760.1.10000.1.8.1 |
agSecSecurityLevelThe security level that is indicated by using the
security community string.ro Enumeration .1.3.6.1.4.1.760.1.10000.1.8.1.1 |
agSecCommunityThe community string used for identification of
the desired security level.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.760.1.10000.1.8.1.2 |
agentMgmtSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.760.1.10000.1.9 |
agentAuthRestrictModeRestricting management authorization means that only
snmp requests from members of the trap receiver table
will be accepted.
Requests from other sources will instead cause an
authentication trap, if enabled.
When not restricted, snmp requests from any manager
who uses a valid community will be accepted, although
traps will be sent only to those destinations that
are included in the trap receiver table.rw Enumeration .1.3.6.1.4.1.760.1.10000.1.9.1 |