NETSCREEN-OSPF-TRAP-MIB
AI MIB Summary
The NETSCREEN-OSPF-TRAP-MIB module defines SNMP trap notifications for Juniper NetScreen devices running OSPF Version 2, specifically alerting on topology changes, neighbor state transitions (such as Up/Down events), and link-state database synchronization failures.
The MIB module to describe traps for the OSPF Version 2 Protocol.
Main OID:
nsOspfTrap.1.3.6.1.4.1.3224.18.2.16
23
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
nsOspfTrapThe MIB module to describe traps for the OSPF
Version 2 Protocol. MODULE-IDENTITY .1.3.6.1.4.1.3224.18.2.16 |
nsOspfTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.3224.18.2.16.1 |
nsOspfSetTrapA four-octet string serving as a bit map for
the trap events defined by the OSPF traps. This
object is used to enable and disable specific
OSPF traps where a 1 in the bit field
represents enabled. The right-most bit (least
significant) represents trap 0.ro OCTET STRING .1.3.6.1.4.1.3224.18.2.16.1.1 |
nsOspfConfigErrorTypePotential types of configuration conflicts.
Used by the nsOspfConfigError and nsOspfConfigVir-
tError traps.ro Enumeration .1.3.6.1.4.1.3224.18.2.16.1.2 |
nsOspfPacketTypeOSPF packet types.ro Enumeration .1.3.6.1.4.1.3224.18.2.16.1.3 |
nsOspfPacketSrcThe IP address of an inbound packet that can-
not be identified by a neighbor instance.ro IpAddress .1.3.6.1.4.1.3224.18.2.16.1.4 |
nsOspfTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3224.18.2.16.2 |
nsOspfVirtIfStateChangeAn nsOspfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual interface.
This trap should be generated when the inter-
face state regresses (e.g., goes from Point-
to-Point to Down) or progresses to a terminal
state (i.e., Point-to-Point). NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.1 |
nsOspfNbrStateChangeAn nsOspfNbrStateChange trap signifies that
there has been a change in the state of a non-
virtual OSPF neighbor. This trap should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
2-Way or Full). When an neighbor transitions
from or to Full on non-broadcast multi-access
and broadcast networks, the trap should be gen-
erated by the designated router. A designated
router transitioning to Down will be noted by
nsOspfIfStateChange. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.2 |
nsOspfVirtNbrStateChangeAn nsOspfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual neighbor. This trap should be generated
when the neighbor state regresses (e.g., goes
from Attempt or Full to 1-Way or Down) or
progresses to a terminal state (e.g., Full). NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.3 |
nsOspfIfConfigErrorAn nsOspfIfConfigError trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose configuration
parameters conflict with this router's confi-
guration parameters. Note that the event op-
tionMismatch should cause a trap only if it
prevents an adjacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.4 |
nsOspfVirtIfConfigErrorAn nsOspfConfigError trap signifies that a pack-
et has been received on a virtual interface
from a router whose configuration parameters
conflict with this router's configuration
parameters. Note that the event optionMismatch
should cause a trap only if it prevents an ad-
jacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.5 |
nsOspfIfAuthFailureAn nsOspfIfAuthFailure trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose authentication key
or authentication type conflicts with this
router's authentication key or authentication
type. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.6 |
nsOspfVirtIfAuthFailureAn nsOspfVirtIfAuthFailure trap signifies that a
packet has been received on a virtual interface
from a router whose authentication key or au-
thentication type conflicts with this router's
authentication key or authentication type. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.7 |
nsOspfIfRxBadPacketAn nsOspfIfRxBadPacket trap signifies that an
OSPF packet has been received on a non-virtual
interface that cannot be parsed. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.8 |
nsOspfVirtIfRxBadPacketAn nsOspfRxBadPacket trap signifies that an OSPF
packet has been received on a virtual interface
that cannot be parsed. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.9 |
nsOspfTxRetransmitAn nsOspfTxRetransmit trap signifies than an
OSPF packet has been retransmitted on a non-
virtual interface. All packets that may be re-
transmitted are associated with an LSDB entry.
The LS type, LS ID, and Router ID are used to
identify the LSDB entry. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.10 |
nsOspfVirtIfTxRetransmitAn nsOspfTxRetransmit trap signifies than an
OSPF packet has been retransmitted on a virtual
interface. All packets that may be retransmit-
ted are associated with an LSDB entry. The LS
type, LS ID, and Router ID are used to identify
the LSDB entry. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.11 |
nsOspfOriginateLsaAn nsOspfOriginateLsa trap signifies that a new
LSA has been originated by this router. This
trap should not be invoked for simple refreshes
of LSAs (which happesn every 30 minutes), but
instead will only be invoked when an LSA is
(re)originated due to a topology change. Addi-
tionally, this trap does not include LSAs that
are being flushed because they have reached
MaxAge. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.12 |
nsOspfMaxAgeLsaAn nsOspfMaxAgeLsa trap signifies that one of
the LSA in the router's link-state database has
aged to MaxAge. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.13 |
nsOspfLsdbOverflowAn nsOspfLsdbOverflow trap signifies that the
number of LSAs in the router's link-state data-
base has exceeded nsOspfExtLsdbLimit. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.14 |
nsOspfLsdbApproachingOverflowAn nsOspfLsdbApproachingOverflow trap signifies
that the number of LSAs in the router's link-
state database has exceeded ninety percent of
nsOspfExtLsdbLimit. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.15 |
nsOspfIfStateChangeAn nsOspfIfStateChange trap signifies that there
has been a change in the state of a non-virtual
OSPF interface. This trap should be generated
when the interface state regresses (e.g., goes
from Dr to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or
Backup). NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.2.16.2.16 |