NETSCREEN-TRAP-MIB
The NETSCREEN-TRAP-MIB defines the trap definitions for Juniper Networks NetScreen firewalls, enabling SNMP managers to receive asynchronous notifications for specific security events, system status changes, and configuration modifications. The module specifically governs the transmission of trap types 800 through 804, which correspond to critical operational alerts such as interface state transitions, authentication failures, and resource threshold violations.
Imported Objects
Objects
13 total| Object Name |
|---|
netscreenTrapHwThis trap indicates that some kind of hardware problem has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.0.100 |
netscreenTrapFwThis trap indicates that some kind of firewall functions has been triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.0.200 |
netscreenTrapSwThis trap indicates that some kind of software problem has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.0.300 |
netscreenTrapTrfThis trap indicates that some kind of traffic conditions has been triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.0.400 |
netscreenTrapVpnThis trap indicates that VPN tunnel status has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.0.500 |
netscreenTrapNsrpThis trap indicates that NSRP status has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.0.600 |
netscreenTrapGPROThis trap indicates that some kind of Global PRO problems has occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.0.700 |
netscreenTrapDrpThis trap indicates that Drp status has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.0.800 |
netscreenTrapIFFailoverThis trap indicates that interface fail over status has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.0.900 |
netscreenTrapIDPAttackThis trap indicates that IDP attack status has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.3224.0.1000 |
netscreenTrapMibModuleAdded 5 new trap types - 800-804. Removed 1000. MODULE-IDENTITY .1.3.6.1.4.1.3224.2.0 |
netscreenTrapTypeThe integer value of the raised alarm type. Note that the type should be interpreted within a specific trapro Enumeration .1.3.6.1.4.1.3224.2.1 |
netscreenTrapDescThe textual description of the alarmro DisplayString .1.3.6.1.4.1.3224.2.3 |
More MIBs from Netscreen
Browse all NetscreenMIBs →SNMP MIB module
The NETSCREEN-OSPF-MIB provides SNMP access to monitor and manage Juniper NetScreen firewall instances running OSPF Version 2, exposing critical routing metrics such as neighbor adjacency states, interface link costs, and LSDB synchronization status for troubleshooting dynamic routing convergence.
SNMP MIB module
SNMP MIB module
The NETSCREEN-INTERFACE-MIB provides SNMP access to monitor and manage interface configuration parameters, including status, speed, duplex settings, and traffic statistics, specifically for Juniper Networks NetScreen firewall appliances.
The NETSCREEN-BGP4-MIB module enables monitoring and management of Border Gateway Protocol (BGP) session states, neighbor relationships, and routing table statistics on Juniper NetScreen firewalls. It provides specific counters and gauges for BGP-4 protocol events, including peer state transitions, route advertisements, and error conditions within the device's routing engine.