NETSCREEN-INTERFACE-MIB
AI MIB Summary
The NETSCREEN-INTERFACE-MIB provides SNMP access to monitor and manage interface configuration parameters, including status, speed, duplex settings, and traffic statistics, specifically for Juniper Networks NetScreen firewall appliances.
This module defines the object that are used to monitor NS's interface configuration
Main OID:
netscreenInterfaceMibModule.1.3.6.1.4.1.3224.9.0
61
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
61 total| Object Name |
|---|
netscreenInterfaceMibModuleThis module defines the object that are used to monitor NS's interface configuration MODULE-IDENTITY .1.3.6.1.4.1.3224.9.0 |
nsIfTableAll NetScreen devices have a trusted interface and an untrusted interface. The NetScreen-10 and -100 also have a DMZ interface. Additionally, on each of the virtual systems supported by the NetScreen-1000 there can be on or more tursted subinterfaces linking a particular virtual system to one or more virtual LANs. Other interfaces-some physical, some logical, and some virtual-provide exclusive channels for administrative traffic, or for communication among member in a redundant group. In this table, it will collect following interface: tursted interface, untrusted interface, DMZ interface, Management Interface and Subinterface. SEQUENCE OF NsIfEntry .1.3.6.1.4.1.3224.9.1 |
nsIfEntrynsIfEntry collects some attributes about NetScreen interface settings. NsIfEntry .1.3.6.1.4.1.3224.9.1.1 |
nsIfIndexInterface number which uniquely identifies an interface.ro Integer32 .1.3.6.1.4.1.3224.9.1.1.1 |
nsIfNameEach interface has a readable name such as 'trust', 'trust/1', etc.ro DisplayString .1.3.6.1.4.1.3224.9.1.1.2 |
nsIfVsysAccording NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to. If the device is device which doesn't support vsys such as NS-100, we can logically think all the setting belongs to 'root' vsys.ro Integer32 .1.3.6.1.4.1.3224.9.1.1.3 |
nsIfZoneEach interface belongs to one security zone. This attribute displays the security zone name an interface belongs to.ro Integer32 .1.3.6.1.4.1.3224.9.1.1.4 |
nsIfStatusThe interface status which indicates interface's operational status.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.5 |
nsIfIpEach interface must be assigned an IP address.ro IpAddress .1.3.6.1.4.1.3224.9.1.1.6 |
nsIfNetmaskEach interface must belong to a subnet represented by netmask.ro IpAddress .1.3.6.1.4.1.3224.9.1.1.7 |
nsIfGatewayDefault gateway ip address.ro IpAddress .1.3.6.1.4.1.3224.9.1.1.8 |
nsIfMngIpTrusted, untrusted and DMZ interfaces can have two IP address: an interface IP address that corresponds to the physical port through which that interface connects to a network, and a Manage IP address that can be used to receive administrative trafficro IpAddress .1.3.6.1.4.1.3224.9.1.1.9 |
nsIfModeNetScreen interface can has three operation modes. They are transparent, nat and route.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.10 |
nsIfMACMAC address the interface has.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3224.9.1.1.11 |
nsIfMngTelnetThis attribute is used to indicate whether the interface permits telnet management.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.12 |
nsIfMngSCSThis attribute is used to indicate whether the interface permits Secure Command Shell management.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.13 |
nsIfMngWEBThis attribute is used to indicate whether the interface permits WEB UI management.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.14 |
nsIfMngSSLThis attribute is used to indicate whether the interface permits SSL management.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.15 |
nsIfMngSNMPThis attribute is used to indicate whether the interface permits SNMP management.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.16 |
nsIfMngGlobalThis attribute is used to indicate whether the interface permits NS Global management.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.17 |
nsIfMngGlobalProThis attribute is used to indicate whether the interface permits NS Global Pro management.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.18 |
nsIfMngPingThis attribute is used to indicate whether the interface permits Ping go-through.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.19 |
nsIfMngIdentResetThis attribute is used to indicate whether the interface permits ident reset.ro Enumeration .1.3.6.1.4.1.3224.9.1.1.20 |
nsIfInfoInternal id assigned to this interface. Stays persistent across resets.ro Integer32 .1.3.6.1.4.1.3224.9.1.1.21 |
nsIfDescrEach interface has a a configurable descriptor string.ro DisplayString .1.3.6.1.4.1.3224.9.1.1.22 |
nsIfSecondaryIpTableIn some ScreenOS, it supports multiple IP addresses and related subnets based on the same interface. This table collects the multiple IP addresses configuration on an interface. SEQUENCE OF NsIfSecondaryIpEntry .1.3.6.1.4.1.3224.9.2 |
nsIfSecondaryIpEntrynsIfSecondaryIpEntry collects some attributes about multiple IP configurations on an interface. NsIfSecondaryIpEntry .1.3.6.1.4.1.3224.9.2.1 |
nsIfSecondaryIpIndexThe table index used as primary key when retrieving the table.ro Integer32 .1.3.6.1.4.1.3224.9.2.1.1 |
nsIfSecondaryIpIfIdxThe index value which uniquely identifies an interface the secodary ip belongs to. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.ro Integer32 .1.3.6.1.4.1.3224.9.2.1.2 |
nsIfSecondaryIpVsysAccording NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system ID an interface belongs to. If the device is device which doesn't support vsys such as NS-100, we can logically think all the setting belongs to 'root' vsys.ro Integer32 .1.3.6.1.4.1.3224.9.2.1.3 |
nsIfSecondaryIpZoneeach interface belongs to one security zone. this attribute displays the security zone name an interface belongs to.ro Integer32 .1.3.6.1.4.1.3224.9.2.1.4 |
nsIfSecondaryIpAddressIp Address value.ro IpAddress .1.3.6.1.4.1.3224.9.2.1.5 |
nsIfSecondaryIpNetmaskSubnet of a ip belongs to.ro IpAddress .1.3.6.1.4.1.3224.9.2.1.6 |
nsIfSecondaryIpIfInfoInternal id assigned to this interface. Stays persistent across resets.ro Integer32 .1.3.6.1.4.1.3224.9.2.1.7 |
nsIfFlowTablensIfFlowTable is used to get flow statistical information of the interface. SEQUENCE OF NsIfFlowEntry .1.3.6.1.4.1.3224.9.3 |
nsIfFlowEntryTable entry collect some attributes about interface flow counters. NsIfFlowEntry .1.3.6.1.4.1.3224.9.3.1 |
nsIfFlowIfIdxUnique interface id, also used as table index.ro Integer32 .1.3.6.1.4.1.3224.9.3.1.1 |
nsIfFlowVsysAccording NetScreen's concepts. each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to.ro Integer32 .1.3.6.1.4.1.3224.9.3.1.2 |
nsIfFlowInByteIncoming byte number arriving at the this interfacero Counter32 .1.3.6.1.4.1.3224.9.3.1.3 |
nsIfFlowInPacketIncoming packet number arriving at the this interfacero Counter32 .1.3.6.1.4.1.3224.9.3.1.4 |
nsIfFlowOutByteOutgoing byte number sending through this interfacero Counter32 .1.3.6.1.4.1.3224.9.3.1.5 |
nsIfFlowOutPacketOutgoing packet number sending through this interfacero Counter32 .1.3.6.1.4.1.3224.9.3.1.6 |
nsIfFlowInVpnVPN packet go through this interfacero Counter32 .1.3.6.1.4.1.3224.9.3.1.7 |
nsIfInVlanIncoming vlan packetro Counter32 .1.3.6.1.4.1.3224.9.3.1.8 |
nsIfOutVlanOutgoing vlan packetro Counter32 .1.3.6.1.4.1.3224.9.3.1.9 |
nsIfFlowIfInfoInternal id assigned to this interface. Stays persistent across resets.ro Integer32 .1.3.6.1.4.1.3224.9.3.1.10 |
nsIfMonTableThis table collects some of dropped packet counters of interface SEQUENCE OF NsIfMonEntry .1.3.6.1.4.1.3224.9.4 |
nsIfMonEntryAn entry containing tunnel information NsIfMonEntry .1.3.6.1.4.1.3224.9.4.1 |
nsIfMonIfIdxUnique interface id, also used as table index.ro Integer32 .1.3.6.1.4.1.3224.9.4.1.1 |
nsIfMonVsysAccording NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to.ro Integer32 .1.3.6.1.4.1.3224.9.4.1.2 |
nsIfMonPlyDenyPacket drop since denied by policy.ro Counter32 .1.3.6.1.4.1.3224.9.4.1.3 |
nsIfMonAuthFailPacket drop due to authentication failed.ro Counter32 .1.3.6.1.4.1.3224.9.4.1.4 |
nsIfMonUrlBlockPacket drop due to URL blocking.ro Counter32 .1.3.6.1.4.1.3224.9.4.1.5 |
nsIfMonTrMngQueuepacket queue up due to traffic managementro Counter32 .1.3.6.1.4.1.3224.9.4.1.6 |
nsIfMonTrMngDropPacket drop due to traffic managementro Counter32 .1.3.6.1.4.1.3224.9.4.1.7 |
nsIfMonEncFailIPSec enc failed due to sa not available, no ipak, etcro Counter32 .1.3.6.1.4.1.3224.9.4.1.8 |
nsIfMonNoSapacket drop due to no sa found for incomig spiro Counter32 .1.3.6.1.4.1.3224.9.4.1.9 |
nsIfMonNoSaPlypacket drop due to no policy associated with found saro Counter32 .1.3.6.1.4.1.3224.9.4.1.10 |
nsIfMonSaInactivepacket drop due to sa not activero Counter32 .1.3.6.1.4.1.3224.9.4.1.11 |
nsIfMonSaPolicyDenypacket drop due to denial by sa policyro Counter32 .1.3.6.1.4.1.3224.9.4.1.12 |
nsIfMonIfInfoInternal id assigned to this interface. Stays persistent across resets.ro Integer32 .1.3.6.1.4.1.3224.9.4.1.13 |