NETSCREEN-BGP4-MIB
AI MIB Summary
The NETSCREEN-BGP4-MIB module enables monitoring and management of Border Gateway Protocol (BGP) session states, neighbor relationships, and routing table statistics on Juniper NetScreen firewalls. It provides specific counters and gauges for BGP-4 protocol events, including peer state transitions, route advertisements, and error conditions within the device's routing engine.
The MIB module for NS-BGP-4.
Main OID:
nsBgp.1.3.6.1.4.1.3224.18.3
53
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
nsBgpThe MIB module for NS-BGP-4. MODULE-IDENTITY .1.3.6.1.4.1.3224.18.3 |
nsBgpInfoTableBGP info table. This table contains, one entry per VR, information about the BGP's Version, LocalAs and Identifier.deprecated SEQUENCE OF NsBgpInfoEntry .1.3.6.1.4.1.3224.18.3.1 |
nsBgpInfoEntryEntry containing information about the BGP's Version, LocalAs and Identifierdeprecated NsBgpInfoEntry .1.3.6.1.4.1.3224.18.3.1.1 |
nsBgpInfoVersionVector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this object. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported.rodeprecated OCTET STRING .1.3.6.1.4.1.3224.18.3.1.1.1 |
nsBgpInfoLocalAsThe local autonomous system number.rodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.1.1.2 |
nsBgpInfoIdentifierThe BGP Identifier of local system.rodeprecated IpAddress .1.3.6.1.4.1.3224.18.3.1.1.3 |
nsBgpInfoVRIDVirtual Router IDrodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.1.1.4 |
nsBgpPeerTableBGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers.deprecated SEQUENCE OF NsBgpPeerEntry .1.3.6.1.4.1.3224.18.3.3 |
nsBgpPeerEntryEntry containing information about the connection with a BGP peer.deprecated NsBgpPeerEntry .1.3.6.1.4.1.3224.18.3.3.1 |
nsBgpPeerIdentifierThe BGP Identifier of this entry's BGP peer.rodeprecated IpAddress .1.3.6.1.4.1.3224.18.3.3.1.1 |
nsBgpPeerStateThe BGP peer connection state.rodeprecated Enumeration .1.3.6.1.4.1.3224.18.3.3.1.2 |
nsBgpPeerAdminStatusThe desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.rodeprecated Enumeration .1.3.6.1.4.1.3224.18.3.3.1.3 |
nsBgpPeerNegotiatedVersionThe negotiated version of BGP running between the two peers.rodeprecated Integer32 .1.3.6.1.4.1.3224.18.3.3.1.4 |
nsBgpPeerLocalAddrThe local IP address of this entry's BGP connection.rodeprecated IpAddress .1.3.6.1.4.1.3224.18.3.3.1.5 |
nsBgpPeerLocalPortThe local port for the TCP connection between the BGP peers.rodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.3.1.6 |
nsBgpPeerRemoteAddrThe remote IP address of this entry's BGP peer.rodeprecated IpAddress .1.3.6.1.4.1.3224.18.3.3.1.7 |
nsBgpPeerRemotePortThe remote port for the TCP connection between the BGP peers. Note that the objects nsBgpPeerLocalAddr, nsBgpPeerLocalPort, nsBgpPeerRemoteAddr and nsBgpPeerRemotePort provide the appropriate reference to the standard MIB TCP connection table.rodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.3.1.8 |
nsBgpPeerRemoteAsThe remote autonomous system number.rodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.3.1.9 |
nsBgpPeerInUpdatesThe number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.rodeprecated Counter32 .1.3.6.1.4.1.3224.18.3.3.1.10 |
nsBgpPeerOutUpdatesThe number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.rodeprecated Counter32 .1.3.6.1.4.1.3224.18.3.3.1.11 |
nsBgpPeerInTotalMessagesThe total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.rodeprecated Counter32 .1.3.6.1.4.1.3224.18.3.3.1.12 |
nsBgpPeerOutTotalMessagesThe total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.rodeprecated Counter32 .1.3.6.1.4.1.3224.18.3.3.1.13 |
nsBgpPeerLastErrorThe last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.rodeprecated OCTET STRING .1.3.6.1.4.1.3224.18.3.3.1.14 |
nsBgpPeerFsmEstablishedTransitionsThe total number of times the BGP FSM transitioned into the established state.rodeprecated Counter32 .1.3.6.1.4.1.3224.18.3.3.1.15 |
nsBgpPeerFsmEstablishedTimeThis timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.rodeprecated Gauge32 .1.3.6.1.4.1.3224.18.3.3.1.16 |
nsBgpPeerConnectRetryIntervalTime interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.rodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.3.1.17 |
nsBgpPeerHoldTimeTime interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in nsBgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the Hold Timer has not been established with the peer, or, the value of nsBgpPeerHoldTimeConfigured is zero (0).rodeprecated INTEGER ( 0 | 3..65535 ) .1.3.6.1.4.1.3224.18.3.3.1.18 |
nsBgpPeerKeepAliveTime interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with nsBgpPeerHoldTime, it has the same proportion as what nsBgpPeerKeepAliveConfigured has when compared with nsBgpPeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of nsBgpPeerKeepAliveConfigured is zero (0).rodeprecated INTEGER ( 0 | 1..21845 ) .1.3.6.1.4.1.3224.18.3.3.1.19 |
nsBgpPeerHoldTimeConfiguredTime interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (nsBgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.rodeprecated INTEGER ( 0 | 3..65535 ) .1.3.6.1.4.1.3224.18.3.3.1.20 |
nsBgpPeerKeepAliveConfiguredTime interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in nsBgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by nsBgpPeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of nsBgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.rodeprecated INTEGER ( 0 | 1..21845 ) .1.3.6.1.4.1.3224.18.3.3.1.21 |
nsBgpPeerMinASOriginationIntervalTime interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.rodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.3.1.22 |
nsBgpPeerMinRouteAdvertisementIntervalTime interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.rodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.3.1.23 |
nsBgpPeerInUpdateElapsedTimeElapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time nsBgpPeerInUpdates is incremented, the value of this object is set to zero (0).rodeprecated Gauge32 .1.3.6.1.4.1.3224.18.3.3.1.24 |
nsBgpPeerVRIDVirtual Router IDrodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.3.1.25 |
nsBgp4PathAttrTableThe BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers.deprecated SEQUENCE OF NsBgp4PathAttrEntry .1.3.6.1.4.1.3224.18.3.6 |
nsBgp4PathAttrEntryInformation about a path to a network.deprecated NsBgp4PathAttrEntry .1.3.6.1.4.1.3224.18.3.6.1 |
nsBgp4PathAttrPeerThe IP address of the peer where the path information was learned.rodeprecated IpAddress .1.3.6.1.4.1.3224.18.3.6.1.1 |
nsBgp4PathAttrIpAddrPrefixLenLength in bits of the IP address prefix in the Network Layer Reachability Information field.rodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.6.1.2 |
nsBgp4PathAttrIpAddrPrefixAn IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by nsBgp4PathAttrIpAddrPrefixLen. Any bits beyond the length specified by nsBgp4PathAttrIpAddrPrefixLen are zeroed.rodeprecated IpAddress .1.3.6.1.4.1.3224.18.3.6.1.3 |
nsBgp4PathAttrOriginThe ultimate origin of the path information.rodeprecated Enumeration .1.3.6.1.4.1.3224.18.3.6.1.4 |
nsBgp4PathAttrASPathSegmentThe sequence of AS path segments. Each AS path segment is represented by a triple <type, length, value>. The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_SEQUENCE: ordered set of ASs a route in the UPDATE message has traversed. The length is a 1-octet field containing the number of ASs in the value field. The value field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;rodeprecated OCTET STRING .1.3.6.1.4.1.3224.18.3.6.1.5 |
nsBgp4PathAttrNextHopThe address of the border router that should be used for the destination network.rodeprecated IpAddress .1.3.6.1.4.1.3224.18.3.6.1.6 |
nsBgp4PathAttrMultiExitDiscThis metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute.rodeprecated INTEGER (-1..2147483647) .1.3.6.1.4.1.3224.18.3.6.1.7 |
nsBgp4PathAttrLocalPrefThe originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute.rodeprecated INTEGER (-1..2147483647) .1.3.6.1.4.1.3224.18.3.6.1.8 |
nsBgp4PathAttrAtomicAggregateWhether or not the local system has selected a less specific route without selecting a more specific route.rodeprecated Enumeration .1.3.6.1.4.1.3224.18.3.6.1.9 |
nsBgp4PathAttrAggregatorASThe AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute.rodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.6.1.10 |
nsBgp4PathAttrAggregatorAddrThe IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.rodeprecated IpAddress .1.3.6.1.4.1.3224.18.3.6.1.11 |
nsBgp4PathAttrCalcLocalPrefThe degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute.rodeprecated INTEGER (-1..2147483647) .1.3.6.1.4.1.3224.18.3.6.1.12 |
nsBgp4PathAttrBestAn indication of whether or not this route was chosen as the best BGP4 route.rodeprecated Enumeration .1.3.6.1.4.1.3224.18.3.6.1.13 |
nsBgp4PathAttrUnknownOne or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.rodeprecated OCTET STRING .1.3.6.1.4.1.3224.18.3.6.1.14 |
nsBgp4PathAttrVRIDVirtual Router IDrodeprecated INTEGER .1.3.6.1.4.1.3224.18.3.6.1.15 |
nsBgpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3224.18.3.7 |
nsBgpEstablishedThe BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.3224.18.3.7.1 |