NETSCREEN-VR-OSPF-MIB
The MIB module to describe the NS-OSPF Version 2 Protocol
Main OID:
nsVrOspf.1.3.6.1.4.1.3224.18.5
146
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
146 total| Object Name |
|---|
nsVrOspfThe MIB module to describe the NS-OSPF Version 2
Protocol MODULE-IDENTITY .1.3.6.1.4.1.3224.18.5 |
nsVrOspfGeneralTableOspf general information table per VR SEQUENCE OF NsVrOspfGeneralEntry .1.3.6.1.4.1.3224.18.5.1 |
nsVrOspfGeneralEntryOspf general information table per VR NsVrOspfGeneralEntry .1.3.6.1.4.1.3224.18.5.1.1 |
nsVrOspfRouterIdA 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IP interface addresses.ro RouterID .1.3.6.1.4.1.3224.18.5.1.1.1 |
nsVrOspfAdminStatThe administrative status of OSPF in the
router. The value 'enabled' denotes that the
OSPF Process is active on at least one inter-
face; 'disabled' disables it on all inter-
faces.ro Status .1.3.6.1.4.1.3224.18.5.1.1.2 |
nsVrOspfVersionNumberThe current version number of the OSPF proto-
col is 2.ro Enumeration .1.3.6.1.4.1.3224.18.5.1.1.3 |
nsVrOspfAreaBdrRtrStatusA flag to note whether this router is an area
border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.1.1.4 |
nsVrOspfASBdrRtrStatusA flag to note whether this router is config-
ured as an Autonomous System border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.1.1.5 |
nsVrOspfExternLsaCountThe number of external (LS type 5) link-state
advertisements in the link-state database.ro Gauge32 .1.3.6.1.4.1.3224.18.5.1.1.6 |
nsVrOspfExternLsaCksumSumThe 32-bit unsigned sum of the LS checksums of
the external link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link-state database of two
routers.ro Integer32 .1.3.6.1.4.1.3224.18.5.1.1.7 |
nsVrOspfTOSSupportThe router's support for type-of-service rout-
ing.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.1.1.8 |
nsVrOspfOriginateNewLsasThe number of new link-state advertisements
that have been originated. This number is in-
cremented each time the router originates a new
LSA.ro Counter32 .1.3.6.1.4.1.3224.18.5.1.1.9 |
nsVrOspfRxNewLsasThe number of link-state advertisements re-
ceived determined to be new instantiations.
This number does not include newer instantia-
tions of self-originated link-state advertise-
ments.ro Counter32 .1.3.6.1.4.1.3224.18.5.1.1.10 |
nsVrOspfExtLsdbLimitThe maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
nsVrOspfExtLsdbLimit, the router enters Overflow-
State. The router never holds more than
nsVrOspfExtLsdbLimit non-default AS-external-LSAs
in its database. OspfExtLsdbLimit MUST be set
identically in all routers attached to the OSPF
backbone and/or any regular OSPF area. (i.e.,
OSPF stub areas and NSSAs are excluded).ro Integer32 (-1..'7FFFFFFF'H) .1.3.6.1.4.1.3224.18.5.1.1.11 |
nsVrOspfMulticastExtensionsA Bit Mask indicating whether the router is
forwarding IP multicast (Class D) datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
Bit 0, if set, indicates that the router can
forward IP multicast datagrams in the router's
directly attached areas (called intra-area mul-
ticast routing).
Bit 1, if set, indicates that the router can
forward IP multicast datagrams between OSPF
areas (called inter-area multicast routing).
Bit 2, if set, indicates that the router can
forward IP multicast datagrams between Auto-
nomous Systems (called inter-AS multicast rout-
ing).
Only certain combinations of bit settings are
allowed, namely: 0 (no multicast forwarding is
enabled), 1 (intra-area multicasting only), 3
(intra-area and inter-area multicasting), 5
(intra-area and inter-AS multicasting) and 7
(multicasting everywhere). By default, no mul-
ticast forwarding is enabled.ro Integer32 .1.3.6.1.4.1.3224.18.5.1.1.12 |
nsVrOspfExitOverflowIntervalThe number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external-LSAs. When
set to 0, the router will not leave Overflow-
State until restarted.ro PositiveInteger .1.3.6.1.4.1.3224.18.5.1.1.13 |
nsVrOspfDemandExtensionsThe router's support for demand routing.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.1.1.14 |
nsVrOspfGeneralVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.1.1.15 |
nsVrOspfAreaTableInformation describing the configured parame-
ters and cumulative statistics of the router's
attached areas. SEQUENCE OF NsVrOspfAreaEntry .1.3.6.1.4.1.3224.18.5.2 |
nsVrOspfAreaEntryInformation describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas. NsVrOspfAreaEntry .1.3.6.1.4.1.3224.18.5.2.1 |
nsVrOspfAreaIdA 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone.ro AreaID .1.3.6.1.4.1.3224.18.5.2.1.1 |
nsVrOspfImportAsExternThe area's support for importing AS external
link- state advertisements.rw Enumeration .1.3.6.1.4.1.3224.18.5.2.1.3 |
nsVrOspfSpfRunsThe number of times that the intra-area route
table has been calculated using this area's
link-state database. This is typically done
using Dijkstra's algorithm.ro Counter32 .1.3.6.1.4.1.3224.18.5.2.1.4 |
nsVrOspfAreaBdrRtrCountThe total number of area border routers reach-
able within this area. This is initially zero,
and is calculated in each SPF Pass.ro Gauge32 .1.3.6.1.4.1.3224.18.5.2.1.5 |
nsVrOspfAsBdrRtrCountThe total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass.ro Gauge32 .1.3.6.1.4.1.3224.18.5.2.1.6 |
nsVrOspfAreaLsaCountThe total number of link-state advertisements
in this area's link-state database, excluding
AS External LSA's.ro Gauge32 .1.3.6.1.4.1.3224.18.5.2.1.7 |
nsVrOspfAreaLsaCksumSumThe 32-bit unsigned sum of the link-state ad-
vertisements' LS checksums contained in this
area's link-state database. This sum excludes
external (LS type 5) link-state advertisements.
The sum can be used to determine if there has
been a change in a router's link state data-
base, and to compare the link-state database of
two routers.ro Integer32 .1.3.6.1.4.1.3224.18.5.2.1.8 |
nsVrOspfAreaSummaryThe variable nsVrOspfAreaSummary controls the im-
port of summary LSAs into stub areas. It has
no effect on other areas.
If it is noAreaSummary, the router will neither
originate nor propagate summary LSAs into the
stub area. It will rely entirely on its de-
fault route.
If it is sendAreaSummary, the router will both
summarize and propagate summary LSAs.rw Enumeration .1.3.6.1.4.1.3224.18.5.2.1.9 |
nsVrOspfAreaStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.2.1.10 |
nsVrOspfAreaVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.2.1.11 |
nsVrOspfStubAreaTableThe set of metrics that will be advertised by
a default Area Border Router into a stub area. SEQUENCE OF NsVrOspfStubAreaEntry .1.3.6.1.4.1.3224.18.5.3 |
nsVrOspfStubAreaEntryThe metric for a given Type of Service that
will be advertised by a default Area Border
Router into a stub area. NsVrOspfStubAreaEntry .1.3.6.1.4.1.3224.18.5.3.1 |
nsVrOspfStubAreaIdThe 32 bit identifier for the Stub Area. On
creation, this can be derived from the in-
stance.ro AreaID .1.3.6.1.4.1.3224.18.5.3.1.1 |
nsVrOspfStubTOSThe Type of Service associated with the
metric. On creation, this can be derived from
the instance.ro TOSType .1.3.6.1.4.1.3224.18.5.3.1.2 |
nsVrOspfStubMetricThe metric value applied at the indicated type
of service. By default, this equals the least
metric at the type of service among the inter-
faces to other areas.rw BigMetric .1.3.6.1.4.1.3224.18.5.3.1.3 |
nsVrOspfStubStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.3.1.4 |
nsVrOspfStubMetricTypeThis variable displays the type of metric ad-
vertised as a default route.rw Enumeration .1.3.6.1.4.1.3224.18.5.3.1.5 |
nsVrOspfStubVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.3.1.6 |
nsVrOspfLsdbTableThe OSPF Process's Link State Database. SEQUENCE OF NsVrOspfLsdbEntry .1.3.6.1.4.1.3224.18.5.4 |
nsVrOspfLsdbEntryA single Link State Advertisement. NsVrOspfLsdbEntry .1.3.6.1.4.1.3224.18.5.4.1 |
nsVrOspfLsdbAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro AreaID .1.3.6.1.4.1.3224.18.5.4.1.1 |
nsVrOspfLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.3224.18.5.4.1.2 |
nsVrOspfLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.3224.18.5.4.1.3 |
nsVrOspfLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3224.18.5.4.1.4 |
nsVrOspfLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.3224.18.5.4.1.5 |
nsVrOspfLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.3224.18.5.4.1.6 |
nsVrOspfLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.3224.18.5.4.1.7 |
nsVrOspfLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.3224.18.5.4.1.8 |
nsVrOspfLsdbVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.4.1.9 |
nsVrOspfHostTableThe list of Hosts, and their metrics, that the
router will advertise as host routes. SEQUENCE OF NsVrOspfHostEntry .1.3.6.1.4.1.3224.18.5.6 |
nsVrOspfHostEntryA metric to be advertised, for a given type of
service, when a given host is reachable. NsVrOspfHostEntry .1.3.6.1.4.1.3224.18.5.6.1 |
nsVrOspfHostIpAddressThe IP Address of the Host.ro IpAddress .1.3.6.1.4.1.3224.18.5.6.1.1 |
nsVrOspfHostTOSThe Type of Service of the route being config-
ured.ro TOSType .1.3.6.1.4.1.3224.18.5.6.1.2 |
nsVrOspfHostMetricThe Metric to be advertised.rw Metric .1.3.6.1.4.1.3224.18.5.6.1.3 |
nsVrOspfHostStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.6.1.4 |
nsVrOspfHostAreaIDThe Area the Host Entry is to be found within.
By default, the area that a subsuming OSPF in-
terface is in, or 0.0.0.0ro AreaID .1.3.6.1.4.1.3224.18.5.6.1.5 |
nsVrOspfHostVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.6.1.6 |
nsVrOspfIfTableThe OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF. SEQUENCE OF NsVrOspfIfEntry .1.3.6.1.4.1.3224.18.5.7 |
nsVrOspfIfEntryThe OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. NsVrOspfIfEntry .1.3.6.1.4.1.3224.18.5.7.1 |
nsVrOspfIfIpAddressThe IP address of this OSPF interface.ro IpAddress .1.3.6.1.4.1.3224.18.5.7.1.1 |
nsVrOspfAddressLessIfFor the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address.ro Integer32 .1.3.6.1.4.1.3224.18.5.7.1.2 |
nsVrOspfIfAreaIdA 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone.rw AreaID .1.3.6.1.4.1.3224.18.5.7.1.3 |
nsVrOspfIfTypeThe OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType. Broad-
cast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25 and similar
technologies take the value 'nbma', and links
that are definitively point to point take the
value 'pointToPoint'.rw Enumeration .1.3.6.1.4.1.3224.18.5.7.1.4 |
nsVrOspfIfAdminStatThe OSPF interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to OSPF.rw Status .1.3.6.1.4.1.3224.18.5.7.1.5 |
nsVrOspfIfRtrPriorityThe priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker.rw DesignatedRouterPriority .1.3.6.1.4.1.3224.18.5.7.1.6 |
nsVrOspfIfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.rw UpToMaxAge .1.3.6.1.4.1.3224.18.5.7.1.7 |
nsVrOspfIfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets.rw UpToMaxAge .1.3.6.1.4.1.3224.18.5.7.1.8 |
nsVrOspfIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network.rw HelloRange .1.3.6.1.4.1.3224.18.5.7.1.9 |
nsVrOspfIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for all routers attached
to a common network.rw PositiveInteger .1.3.6.1.4.1.3224.18.5.7.1.10 |
nsVrOspfIfPollIntervalThe larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor.rw PositiveInteger .1.3.6.1.4.1.3224.18.5.7.1.11 |
nsVrOspfIfStateThe OSPF Interface State.ro Enumeration .1.3.6.1.4.1.3224.18.5.7.1.12 |
nsVrOspfIfDesignatedRouterThe IP Address of the Designated Router.ro IpAddress .1.3.6.1.4.1.3224.18.5.7.1.13 |
nsVrOspfIfBackupDesignatedRouterThe IP Address of the Backup Designated
Router.ro IpAddress .1.3.6.1.4.1.3224.18.5.7.1.14 |
nsVrOspfIfEventsThe number of times this OSPF interface has
changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.3224.18.5.7.1.15 |
nsVrOspfIfAuthKeyThe Authentication Key. If the Area's Author-
ization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.
Note that unauthenticated interfaces need no
authentication key, and simple password authen-
tication cannot use a key of more than 8 oc-
tets. Larger keys are useful only with authen-
tication mechanisms not specified in this docu-
ment.
When read, nsVrOspfIfAuthKey always returns an Oc-
tet String of length zero.rw OCTET STRING .1.3.6.1.4.1.3224.18.5.7.1.16 |
nsVrOspfIfStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.7.1.17 |
nsVrOspfIfMulticastForwardingThe way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NBMA interfaces, and
setting nsVrOspfMulticastForwarding to 0 effective-
ly disables all multicast forwarding.rw Enumeration .1.3.6.1.4.1.3224.18.5.7.1.18 |
nsVrOspfIfDemandIndicates whether Demand OSPF procedures (hel-
lo supression to FULL neighbors and setting the
DoNotAge flag on proogated LSAs) should be per-
formed on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.7.1.19 |
nsVrOspfIfAuthTypeThe authentication type specified for an in-
terface. Additional authentication types may
be assigned locally.rw INTEGER .1.3.6.1.4.1.3224.18.5.7.1.20 |
nsVrOspfIfVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.7.1.21 |
nsVrOspfIfMetricTableThe TOS metrics for a non-virtual interface
identified by the interface index. SEQUENCE OF NsVrOspfIfMetricEntry .1.3.6.1.4.1.3224.18.5.8 |
nsVrOspfIfMetricEntryA particular TOS metric for a non-virtual in-
terface identified by the interface index. NsVrOspfIfMetricEntry .1.3.6.1.4.1.3224.18.5.8.1 |
nsVrOspfIfMetricIpAddressThe IP address of this OSPF interface. On row
creation, this can be derived from the in-
stance.ro IpAddress .1.3.6.1.4.1.3224.18.5.8.1.1 |
nsVrOspfIfMetricAddressLessIfFor the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the value of ifIndex for in-
terfaces having no IP Address. On row crea-
tion, this can be derived from the instance.ro Integer32 .1.3.6.1.4.1.3224.18.5.8.1.2 |
nsVrOspfIfMetricTOSThe type of service metric being referenced.
On row creation, this can be derived from the
instance.ro TOSType .1.3.6.1.4.1.3224.18.5.8.1.3 |
nsVrOspfIfMetricValueThe metric of using this type of service on
this interface. The default value of the TOS 0
Metric is 10^8 / ifSpeed.rw Metric .1.3.6.1.4.1.3224.18.5.8.1.4 |
nsVrOspfIfMetricStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.8.1.5 |
nsVrOspfIfMetricVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.8.1.6 |
nsVrOspfVirtIfTableInformation about this router's virtual inter-
faces. SEQUENCE OF NsVrOspfVirtIfEntry .1.3.6.1.4.1.3224.18.5.9 |
nsVrOspfVirtIfEntryInformation about a single Virtual Interface. NsVrOspfVirtIfEntry .1.3.6.1.4.1.3224.18.5.9.1 |
nsVrOspfVirtIfAreaIdThe Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0ro AreaID .1.3.6.1.4.1.3224.18.5.9.1.1 |
nsVrOspfVirtIfNeighborThe Router ID of the Virtual Neighbor.ro RouterID .1.3.6.1.4.1.3224.18.5.9.1.2 |
nsVrOspfVirtIfTransitDelayThe estimated number of seconds it takes to
transmit a link- state update packet over this
interface.rw UpToMaxAge .1.3.6.1.4.1.3224.18.5.9.1.3 |
nsVrOspfVirtIfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets. This
value should be well over the expected round-
trip time.rw UpToMaxAge .1.3.6.1.4.1.3224.18.5.9.1.4 |
nsVrOspfVirtIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor.rw HelloRange .1.3.6.1.4.1.3224.18.5.9.1.5 |
nsVrOspfVirtIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neigh-
bor.rw PositiveInteger .1.3.6.1.4.1.3224.18.5.9.1.6 |
nsVrOspfVirtIfStateOSPF virtual interface states.ro Enumeration .1.3.6.1.4.1.3224.18.5.9.1.7 |
nsVrOspfVirtIfEventsThe number of state changes or error events on
this Virtual Linkro Counter32 .1.3.6.1.4.1.3224.18.5.9.1.8 |
nsVrOspfVirtIfAuthKeyIf Authentication Type is simplePassword, the
device will left adjust and zero fill to 8 oc-
tets.
Note that unauthenticated interfaces need no
authentication key, and simple password authen-
tication cannot use a key of more than 8 oc-
tets. Larger keys are useful only with authen-
tication mechanisms not specified in this docu-
ment.
When read, nsVrOspfVifAuthKey always returns a
string of length zero.rw OCTET STRING .1.3.6.1.4.1.3224.18.5.9.1.9 |
nsVrOspfVirtIfStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.9.1.10 |
nsVrOspfVirtIfAuthTypeThe authentication type specified for a virtu-
al interface. Additional authentication types
may be assigned locally.rw INTEGER .1.3.6.1.4.1.3224.18.5.9.1.11 |
nsVrOspfVirtIfVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.9.1.12 |
nsVrOspfNbrTableA table of non-virtual neighbor information. SEQUENCE OF NsVrOspfNbrEntry .1.3.6.1.4.1.3224.18.5.10 |
nsVrOspfNbrEntryThe information regarding a single neighbor. NsVrOspfNbrEntry .1.3.6.1.4.1.3224.18.5.10.1 |
nsVrOspfNbrIpAddrThe IP address this neighbor is using in its
IP Source Address. Note that, on addressless
links, this will not be 0.0.0.0, but the ad-
dress of another of the neighbor's interfaces.ro IpAddress .1.3.6.1.4.1.3224.18.5.10.1.1 |
nsVrOspfNbrAddressLessIndexOn an interface having an IP Address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, this can be derived from the
instance.ro InterfaceIndex .1.3.6.1.4.1.3224.18.5.10.1.2 |
nsVrOspfNbrRtrIdA 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3224.18.5.10.1.3 |
nsVrOspfNbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.
Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 1, if set, indicates that the associated
area accepts and operates on external informa-
tion; if zero, it is a stub area.
Bit 2, if set, indicates that the system is ca-
pable of routing IP Multicast datagrams; i.e.,
that it implements the Multicast Extensions to
OSPF.
Bit 3, if set, indicates that the associated
area is an NSSA. These areas are capable of
carrying type 7 external advertisements, which
are translated into type 5 external advertise-
ments at NSSA borders.ro Integer32 .1.3.6.1.4.1.3224.18.5.10.1.4 |
nsVrOspfNbrPriorityThe priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network.rw DesignatedRouterPriority .1.3.6.1.4.1.3224.18.5.10.1.5 |
nsVrOspfNbrStateThe State of the relationship with this Neigh-
bor.ro Enumeration .1.3.6.1.4.1.3224.18.5.10.1.6 |
nsVrOspfNbrEventsThe number of times this neighbor relationship
has changed state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.3224.18.5.10.1.7 |
nsVrOspfNbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .1.3.6.1.4.1.3224.18.5.10.1.8 |
nsVrOspfNbmaNbrStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.10.1.9 |
nsVrOspfNbmaNbrPermanenceThis variable displays the status of the en-
try. 'dynamic' and 'permanent' refer to how
the neighbor became known.ro Enumeration .1.3.6.1.4.1.3224.18.5.10.1.10 |
nsVrOspfNbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.10.1.11 |
nsVrOspfNbrVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.10.1.12 |
nsVrOspfVirtNbrTableA table of virtual neighbor information. SEQUENCE OF NsVrOspfVirtNbrEntry .1.3.6.1.4.1.3224.18.5.11 |
nsVrOspfVirtNbrEntryVirtual neighbor information. NsVrOspfVirtNbrEntry .1.3.6.1.4.1.3224.18.5.11.1 |
nsVrOspfVirtNbrAreaThe Transit Area Identifier.ro AreaID .1.3.6.1.4.1.3224.18.5.11.1.1 |
nsVrOspfVirtNbrRtrIdA 32-bit integer uniquely identifying the
neighboring router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3224.18.5.11.1.2 |
nsVrOspfVirtNbrIpAddrThe IP address this Virtual Neighbor is us-
ing.ro IpAddress .1.3.6.1.4.1.3224.18.5.11.1.3 |
nsVrOspfVirtNbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.
Bit 1, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 2, if set, indicates that the system is
Network Multicast capable; ie, that it imple-
ments OSPF Multicast Routing.ro Integer32 .1.3.6.1.4.1.3224.18.5.11.1.4 |
nsVrOspfVirtNbrStateThe state of the Virtual Neighbor Relation-
ship.ro Enumeration .1.3.6.1.4.1.3224.18.5.11.1.5 |
nsVrOspfVirtNbrEventsThe number of times this virtual link has
changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.3224.18.5.11.1.6 |
nsVrOspfVirtNbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .1.3.6.1.4.1.3224.18.5.11.1.7 |
nsVrOspfVirtNbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.11.1.8 |
nsVrOspfVirtNbrVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.11.1.9 |
nsVrOspfExtLsdbTableThe OSPF Process's Links State Database. SEQUENCE OF NsVrOspfExtLsdbEntry .1.3.6.1.4.1.3224.18.5.12 |
nsVrOspfExtLsdbEntryA single Link State Advertisement. NsVrOspfExtLsdbEntry .1.3.6.1.4.1.3224.18.5.12.1 |
nsVrOspfExtLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.3224.18.5.12.1.1 |
nsVrOspfExtLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.3224.18.5.12.1.2 |
nsVrOspfExtLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3224.18.5.12.1.3 |
nsVrOspfExtLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.3224.18.5.12.1.4 |
nsVrOspfExtLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.3224.18.5.12.1.5 |
nsVrOspfExtLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.3224.18.5.12.1.6 |
nsVrOspfExtLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.3224.18.5.12.1.7 |
nsVrOspfExtLsdbVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.12.1.8 |
nsVrOspfAreaAggregateTableA range of IP addresses specified by an IP
address/IP network mask pair. For example,
class B address range of X.X.X.X with a network
mask of 255.255.0.0 includes all IP addresses
from X.X.0.0 to X.X.255.255. Note that if
ranges are configured such that one range sub-
sumes another range (e.g., 10.0.0.0 mask
255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
most specific match is the preferred one. SEQUENCE OF NsVrOspfAreaAggregateEntry .1.3.6.1.4.1.3224.18.5.14 |
nsVrOspfAreaAggregateEntryA range of IP addresses specified by an IP
address/IP network mask pair. For example,
class B address range of X.X.X.X with a network
mask of 255.255.0.0 includes all IP addresses
from X.X.0.0 to X.X.255.255. Note that if
ranges are range configured such that one range
subsumes another range (e.g., 10.0.0.0 mask
255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
most specific match is the preferred one. NsVrOspfAreaAggregateEntry .1.3.6.1.4.1.3224.18.5.14.1 |
nsVrOspfAreaAggregateAreaIDThe Area the Address Aggregate is to be found
within.ro AreaID .1.3.6.1.4.1.3224.18.5.14.1.1 |
nsVrOspfAreaAggregateLsdbTypeThe type of the Address Aggregate. This field
specifies the Lsdb type that this Address Ag-
gregate applies to.ro Enumeration .1.3.6.1.4.1.3224.18.5.14.1.2 |
nsVrOspfAreaAggregateNetThe IP Address of the Net or Subnet indicated
by the range.ro IpAddress .1.3.6.1.4.1.3224.18.5.14.1.3 |
nsVrOspfAreaAggregateMaskThe Subnet Mask that pertains to the Net or
Subnet.ro IpAddress .1.3.6.1.4.1.3224.18.5.14.1.4 |
nsVrOspfAreaAggregateStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3224.18.5.14.1.5 |
nsVrOspfAreaAggregateEffectSubnets subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the subnet's not
being advertised at all outside the area.rw Enumeration .1.3.6.1.4.1.3224.18.5.14.1.6 |
nsVrOspfAreaAggregateVRIDVirtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]ro INTEGER .1.3.6.1.4.1.3224.18.5.14.1.7 |