NB30MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for NB30MIB.
144
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
144 total| Object Name |
|---|
nb30Device OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.12.1 |
IMPORTS Unknown .1.3.6.1.4.1.52.1.6.12.1 |
nb30DeviceDisableBdgIndicates if the bridge will be disabled.rw Enumeration .1.3.6.1.4.1.52.1.6.12.1.1 |
nb30DeviceRestoreSettingsRestore the following settings to their default values:
Bridge Name to CABLETRON REMOTE BRIDGE,
Location to LOCAL,
Enet Port 1 Name to ETHERNET PORT 1,
Enet Port 2 Name to ETHERNET PORT 2,
Remote Port Name to REMOTE PORT,
Enet Port 1 Network Name to LAN_1,
Enet Port 2 Network Name to LAN_2,
Defualt Enet Port to Port 1,
Enable Redundancy to NO,
Port 1 and Port 2 Poll Address to 00-00-00-00-00-00,
Port 1 and Port 2 Poll Interval to 5 Seconds,
Port 1 and Port 2 Max Retries to 6,
Remote Port Network Name to REMOTE LINK,
Ageing Time for Acquired Database to 300 seconds,
Place seventeen default multicast addresses into
the permanent and acquired databases,
Type of Spanning Tree to 802.1,
Type of Filtering to IEEE 802.1,
Bridge Max Age to 20 seconds,
Bridge Forward Delay to 15 seconds,
Bridge Hello Time to 2 seconds,
Bridge Priority to 8000,
Port 1 Priority to 80,
Port 2 Priority to 80,
Port 1 Path Cost to 1000,
Port 2 Path Cost to 1000,
Number of Restarts to 0.rw Enumeration .1.3.6.1.4.1.52.1.6.12.1.2 |
nb30DeviceBdgNameThe user-defined name (up to 32 characters long) of the
bridge. The default bridge name is CABLETRON REMOTE BRIDGE.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.1.3 |
nb30DeviceNumPortsThe number of ports present on the bridge.ro INTEGER .1.3.6.1.4.1.52.1.6.12.1.4 |
nb30DeviceTypeThe type of bridge, NB30.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.1.5 |
nb30DeviceVersionThe release version of the firmware installed in the bridge.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.1.6 |
nb30DeviceLocationThe user-defined name (up to 14 characters long) to
indicate the location of the bridge on the network.
The default location name is LOCAL.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.1.7 |
nb30DeviceStatusThe status of the bridge, ON-LINE, STAND BY or DISABLED.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.1.8 |
nb30DeviceRestartBdgForce the bridge to undergo a software reset.rw Enumeration .1.3.6.1.4.1.52.1.6.12.1.9 |
nb30DeviceFrFwdsThe number of frames forwarded by the bridge.ro Counter .1.3.6.1.4.1.52.1.6.12.1.10 |
nb30DeviceFrRxsThe number of frames received by the bridge.ro Counter .1.3.6.1.4.1.52.1.6.12.1.11 |
nb30DeviceFrFltsThe number of frames filtered by the bridge.ro Counter .1.3.6.1.4.1.52.1.6.12.1.12 |
nb30DeviceErrsThe total number of network errors that have occurred.ro Counter .1.3.6.1.4.1.52.1.6.12.1.13 |
nb30DeviceNumRestartsThe number of times the bridge has been powered up or
restarted.ro Counter .1.3.6.1.4.1.52.1.6.12.1.14 |
nb30DeviceTypeFilteringThe type of filtering to be performed by the bridge. The
default is IEEE 802.1.rw Enumeration .1.3.6.1.4.1.52.1.6.12.1.15 |
nb30DeviceSTAProtocolThe spanning tree algorithm under which the bridge is
operating. The selections are as follows:
- IEEE 802.1 compliant spanning tree algorithm
environment (802.1)
- DEC LAN Bridge 100 environment (DEC)
- Without the spanning tree algorithm enabled (NONE)
The default is 802.1.rw Enumeration .1.3.6.1.4.1.52.1.6.12.1.16 |
nb30DeviceBridgeIDThe unique identifier of the bridge. The first two bytes of
the identifier are the bridge priority and the last six bytes
are the Ethernet address.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.1.17 |
nb30DeviceTopChgCntsThe number of times the bridge's Topology Change Flag
has been changed since the bridge was powered up or
initialized.ro Counter .1.3.6.1.4.1.52.1.6.12.1.18 |
nb30DeviceTimeTopChgThe time in seconds that has elapsed since the bridge's
Topology Change Flag last recorded the value of a
topology change.ro INTEGER .1.3.6.1.4.1.52.1.6.12.1.19 |
nb30DeviceTopChgIndicates if a bridge topology change is in progress.ro Enumeration .1.3.6.1.4.1.52.1.6.12.1.20 |
nb30DeviceRootCostThe cost of the path to the root from this bridge.ro INTEGER .1.3.6.1.4.1.52.1.6.12.1.21 |
nb30DeviceRootPortThe port identifier for the port which offers the lowest cost
path to the root, i.e. that port for which the sum of the
values of the designated cost and path cost parameters
held for the port is lowest.ro INTEGER .1.3.6.1.4.1.52.1.6.12.1.22 |
nb30DeviceDesigRootThe unique identifier of the bridge recorded as the root.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.1.23 |
nb30DeviceMaxAgeThe maximum age of received protocol information before
it is discarded.ro INTEGER .1.3.6.1.4.1.52.1.6.12.1.24 |
nb30DeviceHoldTimeThe minimum time period elapsing between the transmission
of configuration BPDU's through a given bridge port.ro INTEGER .1.3.6.1.4.1.52.1.6.12.1.25 |
nb30DeviceFwdDlyThe time spent in the listening state while moving from the
blocking state to the learning state, or the time spent in
the learning state while moving from the listening state to
the forwarding state.ro INTEGER .1.3.6.1.4.1.52.1.6.12.1.26 |
nb30DeviceHelloTimeThe time interval between the transmission of Configuration
BPDU's by a bridge which is attempting to become the root or
is the root.ro INTEGER .1.3.6.1.4.1.52.1.6.12.1.27 |
nb30DeviceBdgFwdDlyThe value of the forward delay parameter when the bridge
is the root or is attempting to become the root. A time
of 4 to 30 seconds is allowed. The default is 15 seconds.rw INTEGER .1.3.6.1.4.1.52.1.6.12.1.28 |
nb30DeviceBdgMaxAgeThe value of the Max Age parameter when the bridge is
the root or is attempting to become the root. A time of
6 to 40 seconds is allowed. The default is 20 seconds.rw INTEGER .1.3.6.1.4.1.52.1.6.12.1.29 |
nb30DeviceBdgHelloThe value of the Hello Time parameter when the bridge is
the root or is attempting to become the root. A time of 1
to 10 seconds is allowed. The default is 2 seconds.rw INTEGER .1.3.6.1.4.1.52.1.6.12.1.30 |
nb30DeviceBdgPriorityUsed in the spanning tree for priority comparisons. Allowed
range is 0 through FFFF. The default is 8000.rw INTEGER .1.3.6.1.4.1.52.1.6.12.1.31 |
nb30DeviceResetCountsReset all counters to zero.rw Enumeration .1.3.6.1.4.1.52.1.6.12.1.32 |
nb30DeviceUptimeThe time, in seconds, that has elapsed since the bridge
was last reset or initialized.ro INTEGER .1.3.6.1.4.1.52.1.6.12.1.33 |
nb30DeviceRootSwitchThe status of the Root switch on the front panel of the
NB30.ro Enumeration .1.3.6.1.4.1.52.1.6.12.1.34 |
nb30DeviceFwdBroadcastThe status of the Forward Broadcast switch on the front
panel of the NB30.ro Enumeration .1.3.6.1.4.1.52.1.6.12.1.35 |
nb30DeviceConfigSw1The status of Config switch 1 on the back panel of the
NB30.ro Enumeration .1.3.6.1.4.1.52.1.6.12.1.36 |
nb30DeviceConfigSw2The status of Config switch 2 on the back panel of the
NB30.ro Enumeration .1.3.6.1.4.1.52.1.6.12.1.37 |
nb30DeviceConfigSw3The status of Config switch 3 on the back panel of the
NB30.ro Enumeration .1.3.6.1.4.1.52.1.6.12.1.38 |
nb30DeviceConfigSw4The status of Config switch 4 on the back panel of the
NB30.ro Enumeration .1.3.6.1.4.1.52.1.6.12.1.39 |
nb30DevicePortActiveThe Port number which is acting as the online Ethernet
Port on the NB30.ro INTEGER .1.3.6.1.4.1.52.1.6.12.1.40 |
nb30DeviceDefPortThe Port number which is Default Ethernet Port on the
NB30 at power up.rw Enumeration .1.3.6.1.4.1.52.1.6.12.1.41 |
nb30DeviceRedEnableThe state of the Redundancy Enable Flag.rw Enumeration .1.3.6.1.4.1.52.1.6.12.1.42 |
nb30Dsx OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.12.2 |
nb30DsxLoopUpThe loop up command for the DSX-1 Remote Interface.rw Enumeration .1.3.6.1.4.1.52.1.6.12.2.1 |
nb30DsxLoopDnThe loop down command for the DSX-1 Remote Interface.rw Enumeration .1.3.6.1.4.1.52.1.6.12.2.2 |
nb30DsxLoopStThe loop status for the DSX-1 Remote Interface.ro Enumeration .1.3.6.1.4.1.52.1.6.12.2.3 |
nb30DsxLoopPatternThe loop test pattern for the DSX-1 Remote Interface.rw Enumeration .1.3.6.1.4.1.52.1.6.12.2.4 |
nb30DsxChannel OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.12.3 |
nb30DsxChannelTableNB30 DSX-1 Remote Port Channelization Table SEQUENCE OF Nb30DsxEntry .1.3.6.1.4.1.52.1.6.12.3.1 |
nb30DsxEntry Nb30DsxEntry .1.3.6.1.4.1.52.1.6.12.3.1.1 |
nb30DsxChannelControlDisable the DSX-1 Channel.rw Enumeration .1.3.6.1.4.1.52.1.6.12.3.1.1.1 |
nb30DsxChannelIdThe channel number for this entry.rw INTEGER .1.3.6.1.4.1.52.1.6.12.3.1.1.2 |
nb30Port OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.12.4 |
nb30PortTableBridge Port information table SEQUENCE OF Nb30PortEntry .1.3.6.1.4.1.52.1.6.12.4.1 |
nb30PortEntry Nb30PortEntry .1.3.6.1.4.1.52.1.6.12.4.1.1 |
nb30PortAddressThe Ethernet address of the port. Instance of 1 represents
the local Ethernet address, instance of 2 represents the
remote Ethernet address.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.4.1.1.1 |
nb30PortNameThe user-defined name (up to 32 characters long)
assigned to the port. The default Enet port 1 name is
ETHERNET PORT 1 and the default Enet Port 2 name is
ETHERNET PORT 2.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.4.1.1.2 |
nb30PortTypeThe IEEE specification the port meets, e.g. 802.3.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.4.1.1.3 |
nb30PortStatusThe status in which the port is operating. The status
messages for Ports 1 and 2 are:
OFF - The port is off, due to a failed network interface
chip associated with that port.
OK/SQE ON - The port is communicating with the network
and the transceiver making the connection to the network
has SQE enabled.
OK/SQE OFF - The port is communicating with the network
and the transceiver making the connection to the network
has SQE disabled.
CARRIER LOST - Communication with the network has not
been established or has been lost.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.4.1.1.4 |
nb30PortNetNameThe user-defined name (up to 32 characters long)
assigned to a network segment connected to the port.
The default network name for Port 1 is LAN_1 and the
default network name for Port 2 is LAN_2.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.4.1.1.5 |
nb30PortFrRxsThe number of frames received at the specified port.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.6 |
nb30PortDisInboundsThe total number of valid frames that were received at
the port but then discarded by the bridge in the
forwarding process.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.7 |
nb30PortFwdOutbsThe number of frames forwarded successfully to the
appropriate port.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.8 |
nb30PortDisLOBsThe number of packets that were discarded by the bridge
because of a lack of buffer space to maintain the data.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.9 |
nb30PortDisTDEsThe number of frames that were intended for forwarding
but were discarded when the maximum time period set for
transmission was exceeded before forwarding was possible.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.10 |
nb30PortCollisionsThe number of collisions that have occurred on the
network at the specified port.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.11 |
nb30PortTxAbortsThe number of transmissions that have been aborted due
to excessive collisions (over 16 attempts to transmit the
same packet).ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.12 |
nb30PortOowCollisionsThe number of collisions out of the standard collision
window (51.2 uS). This indicates a network problem.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.13 |
nb30PortCRCErrsThe number of packets detected with Cyclical Redundancy
Check failures.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.14 |
nb30PortFrAlignErrsThe number of errors due to misaligned packets.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.15 |
nb30PortPriorityThe part of the port identifier which is used with the
spanning tree algorithm when determining which port in a
LAN segment has priority. The default is 80. Applies to the
LOCAL and REMOTE Ethernet ports where instance 1 always
refers to the local ethernet port and instance 2 always
refers to the remote ethernet port.rw INTEGER .1.3.6.1.4.1.52.1.6.12.4.1.1.16 |
nb30PortStateThe current state of the port, DISABLED, LISTENING,
LEARNING, FORWARDING or BLOCKING. Applies to the
LOCAL and REMOTE Ethernet ports where instance 1 always
refers to the local ethernet port and instance 2 always
refers to the remote ethernet port.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.4.1.1.17 |
nb30PortPathCostThe contributory cost of the applicable port to the overall
cost of the path when the specified port is the root port.
Allowable range is 1 to 65535. The default is 1000. Applies
to the LOCAL and REMOTE Ethernet ports where instance 1 always
refers to the local ethernet port and instance 2 always
refers to the remote ethernet port.rw INTEGER .1.3.6.1.4.1.52.1.6.12.4.1.1.18 |
nb30PortDesigCostThe cost of the path of this port to the root bridge on the
network. Applies to the LOCAL and REMOTE Ethernet ports where
instance 1 always refers to the local ethernet port and
instance 2 always refers to the remote ethernet port.ro INTEGER .1.3.6.1.4.1.52.1.6.12.4.1.1.19 |
nb30PortDesigBrdgThe network address of the bridge that is assumed to be
the root bridge on the network. Applies to the LOCAL and
REMOTE Ethernet ports where instance 1 always refers to
the local ethernet port and instance 2 always refers to
the remote ethernet port.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.4.1.1.20 |
nb30PortDesigPortThe port identifier of the bridge port believed to be the
designated port for the LAN associated with the port.
Applies to the LOCAL and REMOTE Ethernet ports where
instance 1 always refers to the local ethernet port and
instance 2 always refers to the remote ethernet port.ro INTEGER .1.3.6.1.4.1.52.1.6.12.4.1.1.21 |
nb30PortTopChgAckThe value of the topology change acknowledgement flag
in the next configuration BPDU to be transmitted on
the associated port. Applies to the LOCAL and REMOTE
Ethernet ports where instance 1 always refers to the
local ethernet port and instance 2 always refers to
the remote ethernet port.ro Enumeration .1.3.6.1.4.1.52.1.6.12.4.1.1.22 |
nb30PortDesigRootThe unique bridge identifier of the bridge that is assumed
to be the root bridge on the network. Applies to the
LOCAL and REMOTE Ethernet ports where instance 1 always
refers to the local ethernet port and instance 2 always
refers to the remote ethernet port.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.4.1.1.23 |
nb30PortOversizePktsThe number of packets received at the indicated NB30
Port that were greater than the IEEE 802.3 maximum
Ethernet frame size of 1518 bytes.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.24 |
nb30PortFrFilteredsThe number of frames received at the indicated port that
were filtered by the bridge.ro Counter .1.3.6.1.4.1.52.1.6.12.4.1.1.25 |
nb30PortPollAddressThe Poll Address that will be used by the Redundant Port
Algorithm on the NB30.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.4.1.1.26 |
nb30PortPollIntervalThe Poll Interval used by the Redundant Port Algorithm on
the NB30. Valid range is 1 - 30 seconds.rw INTEGER .1.3.6.1.4.1.52.1.6.12.4.1.1.27 |
nb30PortMaxRetryThe Max number of retries for the Redundant Port
Algorithm on the NB30. Valid range is 2 - 99 retriesrw INTEGER .1.3.6.1.4.1.52.1.6.12.4.1.1.28 |
nb30PortIdThe port number for this entry.ro INTEGER .1.3.6.1.4.1.52.1.6.12.4.1.1.29 |
nb30RemPort OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.12.5 |
nb30RemPortTableBridge Remote Port information table SEQUENCE OF Nb30RemPortEntry .1.3.6.1.4.1.52.1.6.12.5.1 |
nb30RemPortEntry Nb30RemPortEntry .1.3.6.1.4.1.52.1.6.12.5.1.1 |
nb30RemPortNameThe user-defined name assigned to the remote port. The
default Remote port name is REMOTE PORT.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.5.1.1.1 |
nb30RemPortTypeThe Electrical interface specification the port meets, e.g.
DSX-1, V.35.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.5.1.1.2 |
nb30RemPortStatusThe status in which the remote port is operating. The status
messages for the Remote Port are:
NO EXT CLOCK
DCE NOT READY / NO DM
DCE NOT READY / NO CTS
LINK OK / DCE READY
NET LOOP / RED ALARM
REM LOOP / RED ALARM
NORMAL / RED ALARM
NET LOOP / YELLOW ALARM
REM LOOP / YELLOW ALARM
NORMAL / YELLOW ALARM
NET LOOP / LINK OK
REM LOOP / LINK OK
NORMAL / LINK OK
NET LOOP / LINK LOST
REM LOOP / LINK LOST
NORMAL / LINK LOSTro OCTET STRING .1.3.6.1.4.1.52.1.6.12.5.1.1.3 |
nb30RemPortNetNameThe user-defined name assigned to a wide area segment
connected to the remote port. The default network name
for Remote Port is REMOTE LINK.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.5.1.1.4 |
nb30RemPortFrRxsThe number of frames received at the remote port.ro Counter .1.3.6.1.4.1.52.1.6.12.5.1.1.5 |
nb30RemPortFwdOutbsThe number of frames forwarded successfully to the
remote port.ro Counter .1.3.6.1.4.1.52.1.6.12.5.1.1.6 |
nb30RemPortDisLOBsThe number of packets that were discarded by the bridge
because of a lack of buffer space to maintain the data.ro Counter .1.3.6.1.4.1.52.1.6.12.5.1.1.7 |
nb30RemPortDisTDEsThe number of frames that were intended for forwarding
but were discarded when the maximum time period set for
transmission was exceeded before forwarding was possible.ro Counter .1.3.6.1.4.1.52.1.6.12.5.1.1.8 |
nb30RemPortCRCErrsThe number of packets detected with Cyclical Redundancy
Check failures.ro Counter .1.3.6.1.4.1.52.1.6.12.5.1.1.9 |
nb30RemPortFrAlErrsThe number of errors due to misaligned packets.ro Counter .1.3.6.1.4.1.52.1.6.12.5.1.1.10 |
nb30RemPortIdThe remote port ID, there is only a single port which is
identified as 0.ro INTEGER .1.3.6.1.4.1.52.1.6.12.5.1.1.11 |
nb30FilterDB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.12.6 |
nb30AcqDB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.12.6.1 |
nb30AcqTotalEntriesThe total number of entries in the acquired database.ro INTEGER .1.3.6.1.4.1.52.1.6.12.6.1.1 |
nb30AcqMaxEntriesThe maximum number of entries allowed in the acquired
database 8191 entries.ro INTEGER .1.3.6.1.4.1.52.1.6.12.6.1.2 |
nb30AcqStaticEntriesThe number of addresses added to the Acquired database
by the user or network manager.ro INTEGER .1.3.6.1.4.1.52.1.6.12.6.1.3 |
nb30AcqDynamicEntriesThe number of entries that have been accumulated in
the Acquired database through the bridge's learning
process.ro INTEGER .1.3.6.1.4.1.52.1.6.12.6.1.4 |
nb30AcqDynAgeTimeThe length of time allowed for a dynamic entry in the
acquired database to be inactive before it is dropped
from the database. A time from 10 - 1,000,000 seconds is
allowed. The default is 300 seconds.rw INTEGER .1.3.6.1.4.1.52.1.6.12.6.1.5 |
nb30AcqEraseDatabaseSet to one to erase all entries in the acquired database.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.1.6 |
nb30AcqDBTableAquired database entrys table SEQUENCE OF Nb30AcqDBEntry .1.3.6.1.4.1.52.1.6.12.6.1.7 |
nb30AcqDBEntry Nb30AcqDBEntry .1.3.6.1.4.1.52.1.6.12.6.1.7.1 |
nb30AcqCreateFilterAdd an entry to the acquired database to filter packets
entering port 1 if those packets are destined for the
specified address.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.1.7.1.1 |
nb30AcqCreateForwardAdd an entry to the acquired database to forward
packets entering port 1 to the remote port if those
packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.1.7.1.2 |
nb30AcqDeleteFilterDelete an entry from the acquired database.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.1.7.1.3 |
nb30AcqFilterTypeDisplay the entry type, STATIC or DYNAMIC.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.6.1.7.1.4 |
nb30AcqFilterActionThe action to be taken for packets entering port 1.ro Enumeration .1.3.6.1.4.1.52.1.6.12.6.1.7.1.5 |
nb30AcqSourceAddressThe source address of this acquired database entry, i.e.
the instance.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.6.1.7.1.6 |
nb30AcqMacAddressThe MAC address for the specific entry.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.6.1.7.1.7 |
nb30PermDB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.12.6.2 |
nb30PermMaxEntriesThe maximum number of entries allowed in the permanent
database 2047 entries.ro INTEGER .1.3.6.1.4.1.52.1.6.12.6.2.1 |
nb30PermCurrentEntriesThe number of entries currently recorded in the bridge's
permanent database.ro INTEGER .1.3.6.1.4.1.52.1.6.12.6.2.2 |
nb30PermEraseDatabaseErase all entries in the permanent database.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.2.3 |
nb30PermDBTableAquired database entrys table SEQUENCE OF Nb30PermDBEntry .1.3.6.1.4.1.52.1.6.12.6.2.4 |
nb30PermDBEntry Nb30PermDBEntry .1.3.6.1.4.1.52.1.6.12.6.2.4.1 |
nb30PermCreateFilterAdd an entry to the permanent database to filter packets
entering port 1 if those packets are destined for the
specified address.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.2.4.1.1 |
nb30PermCreateForwardAdd an entry to the permanent database to forward
packets entering port 1 to the remote port if those
packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.2.4.1.2 |
nb30PermDeleteEntryDelete an entry from the permanent database.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.2.4.1.3 |
nb30PermFilterTypeDisplay the entry type, STATIC .ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.6.2.4.1.4 |
nb30PermFilterActionThe action taken on packets entering port 1.ro Enumeration .1.3.6.1.4.1.52.1.6.12.6.2.4.1.5 |
nb30PermSourceAddressThe source address in this permanent database entry, i.e.
the instance.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.6.2.4.1.6 |
nb30PermDBMacAddressThe specific MAC address for this entry.ro OCTET STRING .1.3.6.1.4.1.52.1.6.12.6.2.4.1.7 |
nb30SpecDB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.12.6.3 |
nb30SpecNumEntriesThe number of filters in the special database.ro INTEGER .1.3.6.1.4.1.52.1.6.12.6.3.1 |
nb30SpecMaxEntriesThe maximum number of filters the special database can
contain.ro INTEGER .1.3.6.1.4.1.52.1.6.12.6.3.2 |
nb30SpecNextFilterNumThe number of the next available filter that can be added
to the special database. This OID will return a 255 if the
database is fullro INTEGER .1.3.6.1.4.1.52.1.6.12.6.3.3 |
nb30SpecDBTable SEQUENCE OF Nb30SpecDBEntry .1.3.6.1.4.1.52.1.6.12.6.3.4 |
nb30SpecDBEntry Nb30SpecDBEntry .1.3.6.1.4.1.52.1.6.12.6.3.4.1 |
nb30SpecEnableEnable or disable the filter.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.3.4.1.1 |
nb30SpecPort1Set port 1 to filter or forward packets.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.3.4.1.2 |
nb30SpecDestAddressSet the special database to filter packets with a specific
destination address.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.6.3.4.1.3 |
nb30SpecSrcAddressSet the special database to filter packets with a specific
source address.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.6.3.4.1.4 |
nb30SpecTypeSet the special database to filter packets with a specific
type field.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.6.3.4.1.5 |
nb30SpecDataFieldSet the special database to filter packets based on the
first sixteen bytes of data in the packet.rw OCTET STRING .1.3.6.1.4.1.52.1.6.12.6.3.4.1.6 |
nb30SpecDeleteFilterDelete a filter from the special database.rw Enumeration .1.3.6.1.4.1.52.1.6.12.6.3.4.1.7 |
nb30SpecDbFilterNumberThe specific special data base filter number.ro INTEGER .1.3.6.1.4.1.52.1.6.12.6.3.4.1.8 |