ME1200-LLDPMED-MIB
AI MIB Summary
The ME1200-LLDPMED-MIB enables monitoring of Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED) session states and device capabilities on Cisco ME1200 series metro Ethernet switches. It facilitates the retrieval of critical operational metrics including port status, network policy configurations, and power management parameters for voice and video endpoint integration.
This is a private version of the LLDPMED MIB
Main OID:
me1200LldpmedMib.1.3.6.1.4.1.9.9.815.1.71
132
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
132 total| Object Name |
|---|
me1200LldpmedMibThis is a private version of the LLDPMED MIB MODULE-IDENTITY .1.3.6.1.4.1.9.9.815.1.71 |
me1200LldpmedMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.71.1 |
me1200LldpmedConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.71.1.2 |
me1200LldpmedConfigGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.71.1.2.1 |
me1200LldpmedConfigGlobalFastRepeatCountNumber of times to repeat LLDP frame transmission at fast start
Rapid startup and Emergency Call Service Location Identification
Discovery of endpoints is a critically important aspect of VoIP systems
in general. In addition, it is best to advertise only those pieces of
information which are specifically relevant to particular endpoint
types (for example only advertise the voice network policy to permitted
voice-capable devices), both in order to conserve the limited LLDPU
space and to reduce security and system integrity issues that can come
with inappropriate knowledge of the network policy.
With this in mind LLDP-MED defines an LLDP-MED Fast Start interaction
between the protocol and the application layers on top of the protocol,
in order to achieve these related properties. Initially, a Network
Connectivity Device will only transmit LLDP TLVs in an LLDPDU. Only
after an LLDP-MED Endpoint Device is detected, will an LLDP-MED capable
Network Connectivity Device start to advertise LLDP-MED TLVs in
outgoing LLDPDUs on the associated port. The LLDP-MED application will
temporarily speed up the transmission of the LLDPDU to start within a
second, when a new LLDP-MED neighbor has been detected in order share
LLDP-MED information as fast as possible to new neighbors.
Because there is a risk of an LLDP frame being lost during transmission
between neighbors, it is recommended to repeat the fast start
transmission multiple times to increase the possibility of the
neighbors receiving the LLDP frame. With fast start repeat count it is
possible to specify the number of times the fast start transmission
would be repeated. The recommended value is 4 times, given that 4 LLDP
frames with a 1 second interval will be transmitted, when an LLDP frame
with new information is received.
It should be noted that LLDP-MED and the LLDP-MED Fast Start mechanism
is only intended to run on links between LLDP-MED Network Connectivity
Devices and Endpoint Devices, and as such does not apply to links
between LAN infrastructure elements, including Network Connectivity
Devices, or other types of links.rw ME1200Unsigned8 .1.3.6.1.4.1.9.9.815.1.71.1.2.1.1 |
me1200LldpmedConfigGlobalLatitudeLatitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator.rw ME1200Integer64 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.2.1.2 |
me1200LldpmedConfigGlobalLongitudeLongitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian.rw ME1200Integer64 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.2.1.3 |
me1200LldpmedConfigGlobalAltitudeTypeSetting altitude type
Possible to select between two altitude types (floors or meters).
Meters are representing meters of altitude defined by the vertical
datum specified. Floors are representing altitude in a form more
relevant in buildings which have different floor-to-floor dimensions.
An altitude = 0.0 is meaningful even outside a building, and represents
ground level at the given latitude and longitude. Inside a building,
0.0 represents the floor level associated with ground level at the main
entrance.rw ME1200lldpmedAltitudeType .1.3.6.1.4.1.9.9.815.1.71.1.2.1.4 |
me1200LldpmedConfigGlobalAltitudeAltitude value in 2s-complement as specified in RFC 3825rw Integer32 .1.3.6.1.4.1.9.9.815.1.71.1.2.1.5 |
me1200LldpmedConfigGlobalElinAddrEmergency Call Service ELIN identifier data format is defined to carry
the ELIN identifier as used during emergency call setup to a
traditional CAMA or ISDN trunk-based PSAP. This format consists of a
numerical digit string, corresponding to the ELIN to be used for
emergency calling. Maximum number of octets are 25.rw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.1.6 |
me1200LldpmedConfigGlobalDatumSetting datum to configure the datum (geodetic system) to use.
The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
Prime Meridian Name: Greenwich.
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich;The associated vertical datum is the North American
Vertical Datum of 1988 (NAVD88).This datum pair is to be used when
referencing locations on land, not near tidal water(which would use
Datum = NAD83/MLLW).
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is Mean Lower Low Water
(MLLW). This datum pair is to be used when referencing locations on
water/sea/ocean.rw ME1200lldpmedDatumType .1.3.6.1.4.1.9.9.815.1.71.1.2.1.7 |
me1200LldpmedConfigLocationInformation OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.71.1.2.2 |
me1200LldpmedConfigLocationInformationStateNational subdivisionrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.1 |
me1200LldpmedConfigLocationInformationCountyCountyrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.2 |
me1200LldpmedConfigLocationInformationCityCityrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.3 |
me1200LldpmedConfigLocationInformationCityDistrictCity districtrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.4 |
me1200LldpmedConfigLocationInformationBlockBlock (Neighborhood)rw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.5 |
me1200LldpmedConfigLocationInformationStreetStreetrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.6 |
me1200LldpmedConfigLocationInformationLeadingStreetDirectionStreet Directionrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.7 |
me1200LldpmedConfigLocationInformationTrailingStreetSuffixTrailling Streetrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.8 |
me1200LldpmedConfigLocationInformationStreetSuffixStreet Suffixrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.9 |
me1200LldpmedConfigLocationInformationHouseNoHouse No.rw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.10 |
me1200LldpmedConfigLocationInformationHouseNoSuffixHouse No. Suffixrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.11 |
me1200LldpmedConfigLocationInformationLandmarkLandmarkrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.12 |
me1200LldpmedConfigLocationInformationAdditionalInfoAdditional Location Inforw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.13 |
me1200LldpmedConfigLocationInformationNameNamerw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.14 |
me1200LldpmedConfigLocationInformationZipCodeZip Coderw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.15 |
me1200LldpmedConfigLocationInformationBuildingBuildingrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.16 |
me1200LldpmedConfigLocationInformationApartmentUnitrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.17 |
me1200LldpmedConfigLocationInformationFloorFloorrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.18 |
me1200LldpmedConfigLocationInformationRoomNumberRoom No.rw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.19 |
me1200LldpmedConfigLocationInformationPlaceTypePlacetyperw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.20 |
me1200LldpmedConfigLocationInformationPostalCommunityNamePostal Community Namerw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.21 |
me1200LldpmedConfigLocationInformationPoBoxP.O. Boxrw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.22 |
me1200LldpmedConfigLocationInformationAdditionalCodeAddination Coderw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.23 |
me1200LldpmedConfigLocationInformationCountryCodeThe two-letter ISO 3166 country code in capital ASCII letters -
Example: DK, DE or US.rw ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.2.2.24 |
me1200LldpmedConfigTableThis is a table to configure LLDP MEDIA configurations for a specific
interface. SEQUENCE OF ME1200LldpmedConfigEntry .1.3.6.1.4.1.9.9.815.1.71.1.2.3 |
me1200LldpmedConfigEntryEach port has a set of control parameters ME1200LldpmedConfigEntry .1.3.6.1.4.1.9.9.815.1.71.1.2.3.1 |
me1200LldpmedConfigIfIndexLogical interface number. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.1 |
me1200LldpmedConfigOptionalTlvsEnables/Disables the LLDP optional TLVs. Bit mask, where setting the
bit(1) to 1 means enable the optional TLV.
Bit 0 represents the capabilities TLV.
Bit 1 represents the network Policy TLV.
Bit 2 represents the location TLV.
Bit 3 represents the PoE TLV.rw ME1200Unsigned8 .1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.3 |
me1200LldpmedConfigDeviceTypeSetting device type to configure the mode the device shall operate as.rw ME1200lldpmedDeviceType .1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.4 |
me1200LldpmedConfigPolicyTableThis is a table to configure LLDP MED Policies for the device. SEQUENCE OF ME1200LldpmedConfigPolicyEntry .1.3.6.1.4.1.9.9.815.1.71.1.2.4 |
me1200LldpmedConfigPolicyEntryNetwork Policy Discovery enables the efficient discovery and diagnosis
of mismatch issues with the VLAN configuration, along with the
associated Layer 2 and Layer 3 attributes, which apply for a set of
specific protocol applications on that port. Improper network policy
configurations are a very significant issue in VoIP environments that
frequently result in voice quality degradation or loss of service.
Policies are only intended for use with applications that have specific
'real-time' network policy requirements, such as interactive voice
and/or video services. ME1200LldpmedConfigPolicyEntry .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1 |
me1200LldpmedConfigPolicyLldpmedPolicyPolicy index. Integer32 .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.1 |
me1200LldpmedConfigPolicyApplicationTypeThe LLDP policy application type.rw ME1200lldpmedRemoteNetworkPolicyApplicationType .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.2 |
me1200LldpmedConfigPolicyTaggedDefines if LLDP policy uses tagged VLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.3 |
me1200LldpmedConfigPolicyVlanIdThe policy VLAN ID. Only valid when policy 'Tagged' is TRUE.rw ME1200Unsigned16 .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.4 |
me1200LldpmedConfigPolicyL2PriorityShows the LLDP neighbor's policy L2 priority. Only valid when policy
'Tagged' is TRUE.rw ME1200Unsigned8 .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.5 |
me1200LldpmedConfigPolicyDscpLLDP policy DSCP.rw ME1200Unsigned8 .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.6 |
me1200LldpmedConfigPolicyActionActionrw ME1200RowEditorState (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.100 |
me1200LldpmedConfigPolicyListTableEach interface can be mapped to multiple policies. Set to TRUE in order
to enable the corresponding policy to be transmitted at the interface.
It is a requirement that the policy is defined. SEQUENCE OF ME1200LldpmedConfigPolicyListEntry .1.3.6.1.4.1.9.9.815.1.71.1.2.5 |
me1200LldpmedConfigPolicyListEntryEach location information has a control parameter ME1200LldpmedConfigPolicyListEntry .1.3.6.1.4.1.9.9.815.1.71.1.2.5.1 |
me1200LldpmedConfigPolicyListIfIndexLogical interface number. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.1 |
me1200LldpmedConfigPolicyListPolicyIndexLogical Policy index. Integer32 .1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.2 |
me1200LldpmedConfigPolicyListLldpmedPoliciesListSet to TRUE assign the corresponding policy index to the interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.3 |
me1200LldpmedConfigPolicyRowEditor OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.71.1.2.6 |
me1200LldpmedConfigPolicyRowEditorLldpmedPolicyPolicy index.rw Integer32 .1.3.6.1.4.1.9.9.815.1.71.1.2.6.1 |
me1200LldpmedConfigPolicyRowEditorApplicationTypeThe LLDP policy application type.rw ME1200lldpmedRemoteNetworkPolicyApplicationType .1.3.6.1.4.1.9.9.815.1.71.1.2.6.2 |
me1200LldpmedConfigPolicyRowEditorTaggedDefines if LLDP policy uses tagged VLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.71.1.2.6.3 |
me1200LldpmedConfigPolicyRowEditorVlanIdThe policy VLAN ID. Only valid when policy 'Tagged' is TRUE.rw ME1200Unsigned16 .1.3.6.1.4.1.9.9.815.1.71.1.2.6.4 |
me1200LldpmedConfigPolicyRowEditorL2PriorityShows the LLDP neighbor's policy L2 priority. Only valid when policy
'Tagged' is TRUE.rw ME1200Unsigned8 .1.3.6.1.4.1.9.9.815.1.71.1.2.6.5 |
me1200LldpmedConfigPolicyRowEditorDscpLLDP policy DSCP.rw ME1200Unsigned8 .1.3.6.1.4.1.9.9.815.1.71.1.2.6.6 |
me1200LldpmedConfigPolicyRowEditorActionActionrw ME1200RowEditorState (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.2.6.100 |
me1200LldpmedStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.71.1.3 |
me1200LldpmedStatusRemoteDeviceInfoTableThis is a table to show the LLDP-MED remote device (neighbor)
information for a specific interface. SEQUENCE OF ME1200LldpmedStatusRemoteDeviceInfoEntry .1.3.6.1.4.1.9.9.815.1.71.1.3.3 |
me1200LldpmedStatusRemoteDeviceInfoEntryEach port has a set of neighbor's information ME1200LldpmedStatusRemoteDeviceInfoEntry .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1 |
me1200LldpmedStatusRemoteDeviceInfoIfIndexLogical interface number. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.1 |
me1200LldpmedStatusRemoteDeviceInfoLldpmedIndexNeighbor information table entry index. Integer32 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.2 |
me1200LldpmedStatusRemoteDeviceInfoCapabilitiesLLDP neighbor's capabilities bit mask.
Bit 0 represents LLDP-MED capabilities.
Bit 1 represents Network Policy.
Bit 2 represents Location Identification.
Bit 3 represents Extended Power via MDI - PSE.
Bit 4 represents Extended Power via MDI - PD
Bit 5 represents Inventoryro ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.4 |
me1200LldpmedStatusRemoteDeviceInfoCapabilitiesEnabledLLDP neighbor's capabilities bit mask for the capabilities which are
currently enabled.
Bit 0 represents LLDP-MED capabilities.
Bit 1 represents Network Policy.
Bit 2 represents Location Identification.
Bit 3 represents Extended Power via MDI - PSE.
Bit 4 represents Extended Power via MDI - PD
Bit 5 represents Inventoryro ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.5 |
me1200LldpmedStatusRemoteDeviceInfoLatitudeLatitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator.ro ME1200Integer64 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.6 |
me1200LldpmedStatusRemoteDeviceInfoLongitudeLongitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian.ro ME1200Integer64 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.7 |
me1200LldpmedStatusRemoteDeviceInfoAltitudeTypeAltitude type as either floors or meters. Meters are representing
meters of altitude defined by the vertical datum specified. Floors are
representing altitude in a form more relevant in buildings which have
different floor-to-floor dimensions. An altitude = 0.0 is meaningful
even outside a building, and represents ground level at the given
latitude and longitude. Inside a building, 0.0 represents the floor
level associated with ground level at the main entrance.ro ME1200lldpmedAltitudeType .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.8 |
me1200LldpmedStatusRemoteDeviceInfoAltitudeAltitude value in 2s-complement as specified in RFC 3825ro Integer32 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.9 |
me1200LldpmedStatusRemoteDeviceInfoDatumDatum (geodetic system) .
The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
Prime Meridian Name: Greenwich.
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is the North American
Vertical Datum of 1988 (NAVD88). This datum pair is to be used when
referencing locations on land, not near tidal water(which would use
Datum = NAD83/MLLW).
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is Mean Lower Low Water
(MLLW). This datum pair is to be used when referencing locations on
water/sea/ocean.ro ME1200lldpmedDatumType .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.10 |
me1200LldpmedStatusRemoteDeviceInfoElinAddrEmergency Call Service ELIN identifier data format is defined to carry
the ELIN identifier as used during emergency call setup to a
traditional CAMA or ISDN trunk-based PSAP. This format consists of a
numerical digit string, corresponding to the ELIN to be used for
emergency calling. Maximum number of octets are 25.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.12 |
me1200LldpmedStatusRemoteDeviceInfoDeviceTypeShows the LLDP neighbor's device type.ro ME1200lldpmedRemoteDeviceType .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.13 |
me1200LldpmedStatusRemoteDeviceInfoHwRevShows the LLDP neighbor's hardware revision.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.14 |
me1200LldpmedStatusRemoteDeviceInfoFwRevShows the LLDP neighbor's firmware revision.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.15 |
me1200LldpmedStatusRemoteDeviceInfoSwRevShows the LLDP neighbor's software revision.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.16 |
me1200LldpmedStatusRemoteDeviceInfoSerialNoShows the LLDP neighbor's serial number.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.17 |
me1200LldpmedStatusRemoteDeviceInfoManufacturerNameShows the LLDP neighbor's manufacturer name.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.18 |
me1200LldpmedStatusRemoteDeviceInfoModelNameShows the LLDP neighbor's model name.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.19 |
me1200LldpmedStatusRemoteDeviceInfoAssetIdShows the LLDP neighbor's asset id.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.20 |
me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSysShows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as
the time (expressed in microseconds) that the transmitting link partner
will wait before it starts transmitting data after leaving the Low
Power Idle (LPI) mode. Section 79.3.5.2, IEEE802.3az.ro ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.21 |
me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSysShows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as
the time (expressed in microseconds) that the receiving link partner is
requesting the transmitting link partner to wait before starting the
transmission data following the Low Power Idle (LPI) mode. Section
79.3.5.1, IEEE802.3az.ro ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.22 |
me1200LldpmedStatusRemoteDeviceInfoEeeFbTwSysShows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner
may inform the transmitter of an alternate desired Tw_sys_tx. Since a
receiving link partner is likely to have discrete levels for savings,
this provides the transmitter with additional information that it may
use for a more efficient allocation. Section 79.3.5.3, IEEE802.3az.ro ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.23 |
me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSysEchoShows the LLDP neighbor's echo transmit Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. When a local link partner
receives its echoed values from the remote link partner it can
determine whether or not the remote link partner has received,
registered, and processed its most recent values. Section 79.3.5.4,
IEEE802.3az.ro ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.24 |
me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSysEchoShows the LLDP neighbor's echo receive Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. When a local link partner
receives its echoed values from the remote link partner it can
determine whether or not the remote link partner has received,
registered, and processed its most recent values. Section 79.3.5.4,
IEEE802.3az.ro ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.25 |
me1200LldpmedStatusRemoteDeviceLocInfoTableThis is a table to show the LLDP-MED remote device (neighbor) civic
location information for a specific interface. SEQUENCE OF ME1200LldpmedStatusRemoteDeviceLocInfoEntry .1.3.6.1.4.1.9.9.815.1.71.1.3.4 |
me1200LldpmedStatusRemoteDeviceLocInfoEntryEach port has a set of neighbors information ME1200LldpmedStatusRemoteDeviceLocInfoEntry .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1 |
me1200LldpmedStatusRemoteDeviceLocInfoIfIndexLogical interface number. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.1 |
me1200LldpmedStatusRemoteDeviceLocInfoLldpmedIndexNeighbor information table entry index. Integer32 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.2 |
me1200LldpmedStatusRemoteDeviceLocInfoStateNational subdivisionro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.5 |
me1200LldpmedStatusRemoteDeviceLocInfoCountyCountyro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.6 |
me1200LldpmedStatusRemoteDeviceLocInfoCityCityro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.7 |
me1200LldpmedStatusRemoteDeviceLocInfoCityDistrictCity districtro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.8 |
me1200LldpmedStatusRemoteDeviceLocInfoBlockBlock (Neighborhood)ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.9 |
me1200LldpmedStatusRemoteDeviceLocInfoStreetStreetro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.10 |
me1200LldpmedStatusRemoteDeviceLocInfoLeadingStreetDirectionStreet Directionro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.11 |
me1200LldpmedStatusRemoteDeviceLocInfoTrailingStreetSuffixTrailling Streetro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.12 |
me1200LldpmedStatusRemoteDeviceLocInfoStreetSuffixStreet Suffixro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.13 |
me1200LldpmedStatusRemoteDeviceLocInfoHouseNoHouse No.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.14 |
me1200LldpmedStatusRemoteDeviceLocInfoHouseNoSuffixHouse No. Suffixro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.15 |
me1200LldpmedStatusRemoteDeviceLocInfoLandmarkLandmarkro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.16 |
me1200LldpmedStatusRemoteDeviceLocInfoAdditionalInfoAdditional Location Inforo ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.17 |
me1200LldpmedStatusRemoteDeviceLocInfoNameNamero ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.18 |
me1200LldpmedStatusRemoteDeviceLocInfoZipCodeZip Codero ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.19 |
me1200LldpmedStatusRemoteDeviceLocInfoBuildingBuildingro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.20 |
me1200LldpmedStatusRemoteDeviceLocInfoApartmentUnitro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.21 |
me1200LldpmedStatusRemoteDeviceLocInfoFloorFloorro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.22 |
me1200LldpmedStatusRemoteDeviceLocInfoRoomNumberRoom No.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.23 |
me1200LldpmedStatusRemoteDeviceLocInfoPlaceTypePlacetypero ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.24 |
me1200LldpmedStatusRemoteDeviceLocInfoPostalCommunityNamePostal Community Namero ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.25 |
me1200LldpmedStatusRemoteDeviceLocInfoPoBoxP.O. Boxro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.26 |
me1200LldpmedStatusRemoteDeviceLocInfoAdditionalCodeAddination Codero ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.27 |
me1200LldpmedStatusRemoteDeviceLocInfoCountryCodeThe two-letter ISO 3166 country code in capital ASCII letters -
Example: DK, DE or US.ro ME1200DisplayString .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.28 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTableThis is a table to show the LLDP-MED remote device (neighbor) network
policies information for a specific interface. SEQUENCE OF ME1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry .1.3.6.1.4.1.9.9.815.1.71.1.3.5 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntryEach port has a set of neighbors information ME1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoIfIndexLogical interface number. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.1 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoLldpmedIndexNeighbor information table entry index. Integer32 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.2 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoPolicyIndexLogical Policy index. Integer32 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.3 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoApplicationTypeThe LLDP policy application type.ro ME1200lldpmedRemoteNetworkPolicyApplicationType .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.5 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoUnknownPolicyPolicy indicates that an Endpoint Device wants to explicitly advertise
that the policy is required by the device. Can be either Defined or
Unknown
Unknown: The network policy for the specified application type is
currently unknown.
Defined: The network policy is defined (known).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.6 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTaggedDefines if LLDP policy uses tagged VLAN.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.7 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoVlanIdThe policy VLAN ID. Only valid when policy 'Tagged' is TRUE.ro ME1200Unsigned16 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.8 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoL2PriorityShows the LLDP neighbor's policy L2 priority. Only valid when policy
'Tagged' is TRUE.ro ME1200Unsigned8 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.9 |
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoDscpLLDP policy DSCP.ro ME1200Unsigned8 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.10 |
me1200LldpmedControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.71.1.4 |
me1200LldpmedMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.71.2 |
me1200LldpmedMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.71.2.1 |
me1200LldpmedMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.71.2.2 |