MARVELL-rldot1q-MIB
The MARVELL-rldot1q-MIB provides vendor-specific management of IEEE 802.1Q VLAN tagging and bridging parameters on Marvell switch hardware, exposing critical metrics such as VLAN port membership, tag filtering states, and per-VLAN traffic counters for Layer 2 network monitoring.
Imported Objects
Objects
14 total| Object Name |
|---|
rlq-bridge-mib<description> MODULE-IDENTITY .1.3.6.1.4.1.89.57.8 |
rldot1q OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.8 |
rldot1qStaticUnicastTableAn augmentation to dot1qStaticUnicastTable SEQUENCE OF Rldot1qStaticUnicastEntry .1.3.6.1.4.1.89.57.8.1 |
rldot1qStaticUnicastEntryAn augmentation to dot1qStaticUnicastEntry Rldot1qStaticUnicastEntry .1.3.6.1.4.1.89.57.8.1.1 |
rldot1qStaticUnicastAddressOwnerThe learned status of this entry:
static(1) - address has added by user.
learned(2)- address has added by device.rw Enumeration .1.3.6.1.4.1.89.57.8.1.1.1 |
rldot1qTpFdbTableAn augmentation to dot1qTpFdbTable SEQUENCE OF Rldot1qTpFdbEntry .1.3.6.1.4.1.89.57.8.2 |
rldot1qTpFdbEntryAn augmentation to dot1qTpFdbEntry Rldot1qTpFdbEntry .1.3.6.1.4.1.89.57.8.2.1 |
rldot1qTpFdbSubStatusThe sub status of this entry. The meanings of the values
are:
none(1) -
non of the following.
dynamic-static(2) -
the value of the corresponding instance of dot1qTpFdbPort was
learned dynamically in SW but kept as static address in HW.ro Enumeration .1.3.6.1.4.1.89.57.8.2.1.1 |
rldot1qTpFdbCountTableCounters for FDB table. Per VLAN, port and type. SEQUENCE OF Rldot1qTpFdbCountEntry .1.3.6.1.4.1.89.57.8.3 |
rldot1qTpFdbCountEntryCount the number of MAC address for a specific VLAN, port and type. Rldot1qTpFdbCountEntry .1.3.6.1.4.1.89.57.8.3.1 |
rldot1qTpFdbCountVlanTagVlan Tag. Zero means all vlansro INTEGER .1.3.6.1.4.1.89.57.8.3.1.1 |
rldot1qTpFdbCountPortPort. Zero means all portsro Integer32 .1.3.6.1.4.1.89.57.8.3.1.2 |
rldot1qTpFdbCountTypeType of the address:
TODOro Enumeration .1.3.6.1.4.1.89.57.8.3.1.3 |
rldot1qTpFdbCountCountNumber of address per selected vlan, port and type.ro INTEGER .1.3.6.1.4.1.89.57.8.3.1.4 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.