MARVELL-ProtectedPorts-MIB
The MARVELL-ProtectedPorts-MIB module enables monitoring and management of port security states and violation counters on Marvell Ethernet switch hardware. It specifically tracks Protected Port configuration status, ingress/egress traffic filtering enforcement, and associated security violation events to ensure network segmentation integrity.
Imported Objects
Objects
9 total| Object Name |
|---|
rlProtectedPorts<description> MODULE-IDENTITY .1.3.6.1.4.1.89.132 |
rlProtectedPortsTableA table containing entries of protected ports configuration information SEQUENCE OF RlProtectedPortsEntry .1.3.6.1.4.1.89.132.1 |
rlProtectedPortsEntryA table entry of protected ports configuration information RlProtectedPortsEntry .1.3.6.1.4.1.89.132.1.1 |
rlProtectedPortTypeSet port protected mode: not-protected, protected
protected ports filter layer 2 traffic from other protected portsrw Enumeration .1.3.6.1.4.1.89.132.1.1.1 |
rlProtectedPortCommunityAssociate protected port with community number which becoming active only when
rlProtectedPortsStatus changed to protected
protected community ports filter layer 2 traffic from protected ports
and from other protected community ports, but do not filter layer 2
traffic from same community ports.
value of 0 disassociate port from its community.rw INTEGER .1.3.6.1.4.1.89.132.1.1.2 |
rlProtectedPortsStatusTableA table containing entries of protected ports status SEQUENCE OF RlProtectedPortsStatusEntry .1.3.6.1.4.1.89.132.2 |
rlProtectedPortsStatusEntryA table entry containing protected ports DB status information RlProtectedPortsStatusEntry .1.3.6.1.4.1.89.132.2.1 |
rlProtectedPortEgressPortslist of ports which are not filtered by protected port mechanism when traffic is forwarded from
the specified ifIndexro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.132.2.1.1 |
rlProtectedPortsGlobalEnabletrue - set all system fast ethernet ports to protected state
false - set all system fast ethernet ports to not protected staterw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.132.3 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.