LLDP-EXT-DOT1-PE-MIB
The LLDP-EXT-DOT1-PE-MIB module monitors IEEE 802.1BR Port Extension (PE) discovery parameters and operational states for network bridges and endpoints via LLDP Type-Length-Value (TLV) extensions. It specifically tracks port extension session attributes, including remote bridge identifiers and physical port mappings, to facilitate the management of cascaded bridge topologies defined in IEEE Std 802.1BR-2012.
Imported Objects
Objects
22 total| Object Name |
|---|
lldpXDot1PEExtensionsThe LLDP Management Information Base extension module for
IEEE 802.1 organizationally defined discovery information
to support Port Extension.
This MIB module is rooted under the
lldpXdot1StandAloneExtensions OID arc, in order to allow
it to be defined independently of other 802.1 LLDP
extension MIBs.
Unless otherwise indicated, the references in this
MIB module are to IEEE Std 802.1BR-2012.
Copyright (C) IEEE. This version of this MIB module
is published as Annex B.5 of IEEE Std 802.1BR-2012;
see the standard itself for full legal notices. MODULE-IDENTITY .1.3.111.2.802.1.1.13.1.5.32962.7.2 |
lldpXdot1PeMIB OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.7.2.1 |
lldpXdot1PeObjects OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1 |
lldpXdot1PeConfig OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.1 |
lldpXdot1PeConfigPortExtensionTableA table that controls selection of LLDP Port Extension
TLVs to be transmitted on individual ports. SEQUENCE OF LldpXdot1PeConfigPortExtensionEntry .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.1.1 |
lldpXdot1PeConfigPortExtensionEntryLLDP configuration information that specifies Port
Exension configuration.
This configuration object augments the
lldpV2Xdot1LocPortExtensionEntry, therefore it is
only present along with the associated
lldpV2Xdot1LocPortExtensionEntry entry.
Each active lldpV2Xdot1ConfigPortExensionEntry must be
restored from non-volatile storage (along with the
corresponding lldpV2Xdot1LocPortExtensionEntry) after a
re-initialization of the management system. LldpXdot1PeConfigPortExtensionEntry .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.1.1.1 |
lldpXdot1PeConfigPortExtensionTxEnableThe lldpXdot1PeConfigPortExtensionTxEnable, which is
defined as a truth value and configured by the network
management, determines whether the IEEE 802.1
organizationally defined Port Extension TLV transmission
is allowed on a given LLDP transmission capable port.
The value of this object must be restored from
non-volatile storage after a re-initialization of the
management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.1.1.1.1 |
lldpXdot1PeLocalData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2 |
lldpXdot1PeLocPortExtensionTableThis table contains one row per port of Port Extension
information (as a part of the LLDP 802.1 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot1PeLocPortExtensionEntry .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2.1 |
lldpXdot1PeLocPortExtensionEntryPort Extension information about a particular
Port Extender Port. LldpXdot1PeLocPortExtensionEntry .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2.1.1 |
lldpXdot1PeLocPECascadePortPriorityContains the cascade port priority.rw Unsigned32 .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2.1.1.1 |
lldpXdot1PeLocPEAddressThis object contains the MAC address that
uniquely identifies the Port Extender.ro MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2.1.1.2 |
lldpXdot1PeLocPECSPAddressThis object contains the MAC address to be used
for the Port Extension control and status protocol.ro MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2.1.1.3 |
lldpXdot1PeRemoteData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3 |
lldpXdot1PeRemPortExtensionTableThis table contains Port Extension information
(as a part of the LLDP IEEE 802.1 organizational extension)
of the remote system. SEQUENCE OF LldpXdot1PeRemPortExtensionEntry .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3.1 |
lldpXdot1PeRemPortExtensionEntryPort Extension information about remote systems port
component. LldpXdot1PeRemPortExtensionEntry .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3.1.1 |
lldpXdot1PeRemPECascadePortPriorityThe cascade port priority.ro Unsigned32 .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3.1.1.1 |
lldpXdot1PeRemPEAddressThis object contains the MAC address that
uniquely identifies the Port Extender.ro MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3.1.1.2 |
lldpXdot1PeRemPECSPAddressThis object contains the MAC address to be used
for the Port Extension Control and Status Protocol.ro MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3.1.1.3 |
lldpXdot1PeConformance OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.7.2.2 |
lldpXdot1PeCompliances OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.7.2.2.1 |
lldpXdot1PeGroups OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.7.2.2.2 |
More MIBs from Versa
Browse all VersaMIBs →The LLDP-EXT-DOT1-V2-MIB module extends the LLDP-V2 framework to expose IEEE 802.1Q and 802.1Qaz organizationally defined TLVs, enabling the monitoring of VLAN tagging configurations, Priority Flow Control (PFC) states, and Enhanced Transmission Selection (ETS) parameters on Layer 2 network switches. This allows administrators to verify and manage data center network flow control policies and VLAN membership attributes via SNMP.
The IEEE8021-Q-BRIDGE-MIB enables monitoring and configuration of IEEE 802.1Q VLAN-tagged bridging domains, specifically tracking VLAN membership, port filtering tables, and bridge protocol data unit (BPDU) states on Layer 2 network switches.
SNMP MIB module
The LLDP-V2-MIB module manages IEEE 802.1AB-2009 compliant Link Layer Discovery Protocol agents to monitor local system identity, remote neighbor topology, and per-port transmission statistics, specifically supporting multi-agent architectures where distinct MAC addresses are associated with a single physical port.
The IEEE8021-EVB-MIB provides SNMP management capabilities for Ethernet Virtual Bridging (EVB) devices, specifically monitoring and configuring virtual station interfaces (VSIs), virtual bridge ports, and associated bridge domain parameters as defined in IEEE 802.1Q-2014. It enables the retrieval of operational states, configuration parameters, and performance counters for virtualization features such as MAC-in-MAC encapsulation and port isolation within IEEE 802.1Q-compliant network infrastructure.
The IEEE8021-MSTP-MIB enables the monitoring and configuration of IEEE 802.1Q Multiple Spanning Tree (MSTP) instances, specifically tracking MST region definitions, instance-to-VLAN mappings, and port state transitions across bridged network devices. It provides granular visibility into MSTP topology convergence, including root bridge election status, path costs, and port roles (designated, root, blocked) to ensure loop-free Layer 2 redundancy.