LINKSYS-GREEN-MIB
AI MIB Summary
The LINKSYS-GREEN-MIB module enables monitoring and management of Linksys switch Green Ethernet Energy Detect features, specifically tracking port power consumption states and energy-saving link status indicators. This private MIB provides visibility into dynamic power reduction mechanisms that deactivate transceivers during periods of low network activity to optimize energy efficiency.
The private MIB module definition for Green Ethernet Energy Detect feature.
Main OID:
rlGreenEth.1.3.6.1.4.1.89.134
16
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
rlGreenEthThe private MIB module definition for Green Ethernet Energy Detect feature. MODULE-IDENTITY .1.3.6.1.4.1.89.134 |
rlGreenEthEnergyDetectEnableThis scalar defines Green Ethernet Enrgy-Detect Globalyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.134.1 |
rlGreenEthShortReachEnableThis scalar defines Green Ethernet Short-Reach Globalyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.134.2 |
rlGreenEthCurrentEnergyConsumptionThis scalar define Green Ethernet all modes current Energy consumption per system in mWatt
in order to calculate current energy consumption in percent proportional to Consumption without Green Ethernet feature
please use the following formula:
(rlGreenEthCurrentEnergyConsumption/rlGreenEthCurrentMaxEnergyConsumption)*100ro Unsigned32 UNITS "mWatt" .1.3.6.1.4.1.89.134.3 |
rlGreenEthCurrentMaxEnergyConsumptionThis scalar define Green Ethernet current maximum consumption Energy consumption per system in mWatt,
as it was without Green Ethernet feature.ro Unsigned32 UNITS "mWatt" .1.3.6.1.4.1.89.134.4 |
rlGreenEthCumulativePowerSaveMeterThis scalar define Green Ethernet cumulative power save per system in Watt*Hourro Unsigned32 UNITS "Watt*Hour" .1.3.6.1.4.1.89.134.5 |
rlGreenEthShortReachThresholdThe usage threshold expressed in meter for
determinate the cable length for Short-Reachrw Unsigned32 .1.3.6.1.4.1.89.134.6 |
rlGreenEthCumulativePowerSaveMeterResetThe rlGreenEthCumulativePowerSaveMeterReset indicates that rlGreenEthCumulativePowerSaveMeter
should be set to ziro.
This object behaviors as write-only than
reading this object will always return 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.134.7 |
rlGreenEthPortTableA table of green state of ports SEQUENCE OF RlGreenEthPortEntry .1.3.6.1.4.1.89.134.8 |
rlGreenEthPortEntryAn entry of green state of port RlGreenEthPortEntry .1.3.6.1.4.1.89.134.8.1 |
rlGreenEthPortSavingTypeValueGreen saving types RlGreenSavingType .1.3.6.1.4.1.89.134.8.1.1 |
rlGreenEthPortAdminStateActive\non Activerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.134.8.1.2 |
rlGreenEthPortOperStateActive\non Activero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.134.8.1.3 |
rlGreenEthPortNonOperReasonReason why saving mode is not activatedro NonOperReasonType .1.3.6.1.4.1.89.134.8.1.4 |
rlGreenEthForceShortReachIfIndexListThe ports that forced enable the Green Ethernet Short Reach configuration
not considering VCT results.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.134.9 |
rlGreenEthMaskLedStatusMask all ports led according to the configuration.rw Enumeration .1.3.6.1.4.1.89.134.10 |