LINKSYS-COPY-MIB
AI MIB Summary
The LINKSYS-COPY-MIB module monitors file transfer operations on Linksys network devices, specifically exposing the `rlCopyInetSpecificCopyInfo` field to track detailed metrics for TFTP, FTP, and HTTP copy sessions. This extension enables granular visibility into the source, destination, and status of file transfers initiated via the device's management interface.
Added field rlCopyInetSpecificCopyInfo
Main OID:
rlCopy.1.3.6.1.4.1.89.87
115
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
115 total| Object Name |
|---|
rlCopyFinishedInformational trap indicating that the device has finished
a copy operation successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.89.0.180 |
rlCopyFailedInformational trap indicating that the copy operation has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.89.0.181 |
rlCopySWFinishedA trap indicating that the device has finished a copy operation of
image successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.89.0.211 |
rlCopySWToUnitsA trap indicating to master unit that remote units have finished
a copy operation of image successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.89.0.212 |
rlCopyMirrorFileIllegalA trap indicating that the mirror configuration file is illegal
due to failure of prevoius copy operation/s to mirror-config. NOTIFICATION-TYPE .1.3.6.1.4.1.89.0.220 |
rlCopyAdded field rlCopyInetSpecificCopyInfo MODULE-IDENTITY .1.3.6.1.4.1.89.87 |
LINKSYS-DEVICEPARAMS-MIBAdded field rlCopyInetSpecificCopyInfo Unknown .1.3.6.1.4.1.89.87 |
rlCopyMibVersionIndicates the Copy support version. The current version is 1.ro INTEGER .1.3.6.1.4.1.89.87.1 |
rlCopyTableThe (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action. SEQUENCE OF RlCopyEntry .1.3.6.1.4.1.89.87.2 |
rlCopyEntryAn entry (conceptual row) in the CopyTable. RlCopyEntry .1.3.6.1.4.1.89.87.2.1 |
rlCopyIndexThe row index in the table.ro INTEGER .1.3.6.1.4.1.89.87.2.1.1 |
rlCopyApplicationIdThe applicatione activated this comandro RlCopyApplicationType .1.3.6.1.4.1.89.87.2.1.2 |
rlCopySourceLocationSource File Locationrw RlCopyLocationType .1.3.6.1.4.1.89.87.2.1.3 |
rlCopySourceIpAddressThe Ip address of the source remote hostrw IpAddress .1.3.6.1.4.1.89.87.2.1.4 |
rlCopySourceUnitNumberThe unit number of the source unitrw INTEGER .1.3.6.1.4.1.89.87.2.1.5 |
rlCopySourceFileNameThe name of the source file.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.2.1.6 |
rlCopySourceFileTypeThe type of the source file.rw RlCopyFileType .1.3.6.1.4.1.89.87.2.1.7 |
rlCopyDestinationLocationDestination File Locationrw RlCopyLocationType .1.3.6.1.4.1.89.87.2.1.8 |
rlCopyDestinationIpAddressThe Ip address of the destination remote hostrw IpAddress .1.3.6.1.4.1.89.87.2.1.9 |
rlCopyDestinationUnitNumberThe unit number of the destination unit,
value 257 means all unitsrw INTEGER .1.3.6.1.4.1.89.87.2.1.10 |
rlCopyDestinationFileNameThe name of the destination file.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.2.1.11 |
rlCopyDestinationFileTypeThe type of the destination file.rw RlCopyFileType .1.3.6.1.4.1.89.87.2.1.12 |
rlCopyUpTimeThe time elapsed since this entry was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.87.2.1.13 |
rlCopyOperationStateThe state of the copy operation.ro Enumeration .1.3.6.1.4.1.89.87.2.1.14 |
rlCopyBytesTransferredThe number of bytes that were transferred by the copy operation.ro INTEGER .1.3.6.1.4.1.89.87.2.1.15 |
rlCopyInBackgroundWhen enabled the copy operation is done in the background.rw Enumeration .1.3.6.1.4.1.89.87.2.1.16 |
rlCopyRowStatusIt is used to insert or delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.87.2.1.17 |
rlCopyHistoryIndexThe index of the entry corresponding to this one in the
rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex).
A value of 0 indicates that no history entry should be kept
for this copy operation.rw INTEGER .1.3.6.1.4.1.89.87.2.1.18 |
rlCopyFreeHistoryIndexGives the next free index in the rlCopyHistoryTable (i.e., the next
available value for rlCopyHistoryHistoryIndex)ro INTEGER .1.3.6.1.4.1.89.87.3 |
rlCopyHistoryTableThe (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action. SEQUENCE OF RlCopyHistoryEntry .1.3.6.1.4.1.89.87.4 |
rlCopyHistoryEntryAn entry (conceptual row) in the rlCopyHistoryTable. RlCopyHistoryEntry .1.3.6.1.4.1.89.87.4.1 |
rlCopyHistoryHistoryIndexThe row index in the table.ro INTEGER .1.3.6.1.4.1.89.87.4.1.1 |
rlCopyHistoryApplicationIdThe application that activated this comandro RlCopyApplicationType .1.3.6.1.4.1.89.87.4.1.2 |
rlCopyHistorySourceLocationSource File Locationrw RlCopyLocationType .1.3.6.1.4.1.89.87.4.1.3 |
rlCopyHistorySourceIpAddressThe IP address of the source remote hostrw IpAddress .1.3.6.1.4.1.89.87.4.1.4 |
rlCopyHistorySourceUnitNumberThe unit number of the source unitrw INTEGER .1.3.6.1.4.1.89.87.4.1.5 |
rlCopyHistorySourceFileNameThe name of the source file.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.4.1.6 |
rlCopyHistorySourceFileTypeThe type of the source file.rw RlCopyFileType .1.3.6.1.4.1.89.87.4.1.7 |
rlCopyHistoryDestinationLocationDestination File Locationrw RlCopyLocationType .1.3.6.1.4.1.89.87.4.1.8 |
rlCopyHistoryDestinationIpAddressThe IP address of the destination remote hostrw IpAddress .1.3.6.1.4.1.89.87.4.1.9 |
rlCopyHistoryDestinationUnitNumberThe unit number of the destination unitrw INTEGER .1.3.6.1.4.1.89.87.4.1.10 |
rlCopyHistoryDestinationFileNameThe name of the destination file.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.4.1.11 |
rlCopyHistoryDestinationFileTypeThe type of the destination file.rw RlCopyFileType .1.3.6.1.4.1.89.87.4.1.12 |
rlCopyHistoryUpTimeThe time elapsed since this entry was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.87.4.1.13 |
rlCopyHistoryOperationStateThe state of the copy operation.ro Enumeration .1.3.6.1.4.1.89.87.4.1.14 |
rlCopyHistoryBytesTransferredThe number of bytes that were transferred by the copy operation.ro INTEGER .1.3.6.1.4.1.89.87.4.1.15 |
rlCopyHistoryInBackgroundWhen enabled the copy operation is done in the background.rw Enumeration .1.3.6.1.4.1.89.87.4.1.16 |
rlCopyHistoryRowStatusIt is used delete an entry. No other operations are permitted since
the history table is populated and updated through the copy table only.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.87.4.1.17 |
rlCopyHistoryErrorMessageError message as a result of failed copy action.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.4.1.18 |
rlCopyAuditingEnableControls whether SysLog messages
should be issued on file copy eventsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.87.5 |
rlCopyMessagesTableThe table listing the messages issued during a COPY operation. SEQUENCE OF RlCopyMessagesEntry .1.3.6.1.4.1.89.87.6 |
rlCopyMessagesEntryAn entry (conceptual row) in the rlCopyMessagesTable. RlCopyMessagesEntry .1.3.6.1.4.1.89.87.6.1 |
rlCopyMessagesCopyIndexThe index of the copy operation whose messages are displayed. INTEGER .1.3.6.1.4.1.89.87.6.1.1 |
rlCopyMessagesMessageIndexThe index of the displayed message. INTEGER .1.3.6.1.4.1.89.87.6.1.2 |
rlCopyMessagesMessageTextThe text of the message occurred in the copy operation.ro DisplayString .1.3.6.1.4.1.89.87.6.1.3 |
rlCopyMessagesStatusOnly destroy is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.87.6.1.4 |
rlCopyMessagesTableRemoveEntriesSetting this object with value n will remove all entries associated
with copy operation represented by the value n from the rlCopyMessagesTable,
i.e. all the entries with rlCopyMessagesCopyIndex = n.rw INTEGER .1.3.6.1.4.1.89.87.7 |
rlCopyInetTableThe (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action. SEQUENCE OF RlCopyInetEntry .1.3.6.1.4.1.89.87.8 |
rlCopyInetEntryAn entry (conceptual row) in the CopyTable. RlCopyInetEntry .1.3.6.1.4.1.89.87.8.1 |
rlCopyInetIndexThe row index in the table.ro INTEGER .1.3.6.1.4.1.89.87.8.1.1 |
rlCopyInetApplicationIdThe applicatione activated this comandro RlCopyApplicationType .1.3.6.1.4.1.89.87.8.1.2 |
rlCopyInetSourceLocationSource File Locationrw RlCopyLocationType .1.3.6.1.4.1.89.87.8.1.3 |
rlCopyInetSourceIpAddressTypeThe Inet address type of the source remote hostrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.87.8.1.4 |
rlCopyInetSourceIpAddressThe Inet address of the source remote hostrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.87.8.1.5 |
rlCopyInetSourceUnitNumberThe unit number of the source unitrw INTEGER .1.3.6.1.4.1.89.87.8.1.6 |
rlCopyInetSourceFileNameThe name of the source file.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.8.1.7 |
rlCopyInetSourceFileTypeThe type of the source file.rw RlCopyFileType .1.3.6.1.4.1.89.87.8.1.8 |
rlCopyInetDestinationLocationDestination File Locationrw RlCopyLocationType .1.3.6.1.4.1.89.87.8.1.9 |
rlCopyInetDestinationIpAddressTypeThe Inet address type of the destination remote hostrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.87.8.1.10 |
rlCopyInetDestinationIpAddressThe Inet address of the destination remote hostrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.87.8.1.11 |
rlCopyInetDestinationUnitNumberThe unit number of the destination unit,
value 257 means all unitsrw INTEGER .1.3.6.1.4.1.89.87.8.1.12 |
rlCopyInetDestinationFileNameThe name of the destination file.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.8.1.13 |
rlCopyInetDestinationFileTypeThe type of the destination file.rw RlCopyFileType .1.3.6.1.4.1.89.87.8.1.14 |
rlCopyInetUpTimeThe time elapsed since this entry was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.87.8.1.15 |
rlCopyInetOperationStateThe state of the copy operation.ro Enumeration .1.3.6.1.4.1.89.87.8.1.16 |
rlCopyInetBytesTransferredThe number of bytes that were transferred by the copy operation.ro INTEGER .1.3.6.1.4.1.89.87.8.1.17 |
rlCopyInetInBackgroundWhen enabled the copy operation is done in the background.rw Enumeration .1.3.6.1.4.1.89.87.8.1.18 |
rlCopyInetRowStatusIt is used to insert or delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.87.8.1.19 |
rlCopyInetHistoryIndexThe index of the entry corresponding to this one in the
rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex).
A value of 0 indicates that no history entry should be kept
for this copy operation.rw INTEGER .1.3.6.1.4.1.89.87.8.1.20 |
rlCopyInetDestinationUnitListA bitmap of destination units for copy operation.rw INTEGER .1.3.6.1.4.1.89.87.8.1.21 |
rlCopyInetUnitStatusListA bitmap of copy operation status for each unit.ro INTEGER .1.3.6.1.4.1.89.87.8.1.22 |
rlCopyInetSpecificCopyInfoCopy application specific information. For example: for SCP copy this
field can be used to pass username and password information.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.8.1.23 |
rlCopyHistoryInetTableThe (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action. SEQUENCE OF RlCopyHistoryInetEntry .1.3.6.1.4.1.89.87.9 |
rlCopyHistoryInetEntryAn entry (conceptual row) in the rlCopyHistoryTable. RlCopyHistoryInetEntry .1.3.6.1.4.1.89.87.9.1 |
rlCopyHistoryInetHistoryIndexThe row index in the table.ro INTEGER .1.3.6.1.4.1.89.87.9.1.1 |
rlCopyHistoryInetApplicationIdThe application that activated this comandro RlCopyApplicationType .1.3.6.1.4.1.89.87.9.1.2 |
rlCopyHistoryInetSourceLocationSource File Locationrw RlCopyLocationType .1.3.6.1.4.1.89.87.9.1.3 |
rlCopyHistoryInetSourceIpAddressTypeThe Inet address type of the source remote hostrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.87.9.1.4 |
rlCopyHistoryInetSourceIpAddressThe Inet address of the source remote hostrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.87.9.1.5 |
rlCopyHistoryInetSourceUnitNumberThe unit number of the source unitrw INTEGER .1.3.6.1.4.1.89.87.9.1.6 |
rlCopyHistoryInetSourceFileNameThe name of the source file.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.9.1.7 |
rlCopyHistoryInetSourceFileTypeThe type of the source file.rw RlCopyFileType .1.3.6.1.4.1.89.87.9.1.8 |
rlCopyHistoryInetDestinationLocationDestination File Locationrw RlCopyLocationType .1.3.6.1.4.1.89.87.9.1.9 |
rlCopyHistoryInetDestinationIpAddressTypeThe Inet address type of the destination remote hostrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.87.9.1.10 |
rlCopyHistoryInetDestinationIpAddressThe Inet address of the destination remote hostrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.87.9.1.11 |
rlCopyHistoryInetDestinationUnitNumberThe unit number of the destination unitrw INTEGER .1.3.6.1.4.1.89.87.9.1.12 |
rlCopyHistoryInetDestinationFileNameThe name of the destination file.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.9.1.13 |
rlCopyHistoryInetDestinationFileTypeThe type of the destination file.rw RlCopyFileType .1.3.6.1.4.1.89.87.9.1.14 |
rlCopyHistoryInetUpTimeThe time elapsed since this entry was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.87.9.1.15 |
rlCopyHistoryInetOperationStateThe state of the copy operation.ro Enumeration .1.3.6.1.4.1.89.87.9.1.16 |
rlCopyHistoryInetBytesTransferredThe number of bytes that were transferred by the copy operation.ro INTEGER .1.3.6.1.4.1.89.87.9.1.17 |
rlCopyHistoryInetInBackgroundWhen enabled the copy operation is done in the background.rw Enumeration .1.3.6.1.4.1.89.87.9.1.18 |
rlCopyHistoryInetRowStatusIt is used delete an entry. No other operations are permitted since
the history table is populated and updated through the copy table only.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.87.9.1.19 |
rlCopyHistoryInetErrorMessageError message as a result of failed copy action.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.87.9.1.20 |
rlCopyHistoryInetDestinationUnitListA bitmap of destination units for copy operation.rw INTEGER .1.3.6.1.4.1.89.87.9.1.21 |
rlCopyHistoryInetUnitStatusListA bitmap of copy operation status for each unit.ro INTEGER .1.3.6.1.4.1.89.87.9.1.22 |
rlCopyUnitsListPotential list of units used by trap rlCopySWToUnitsro INTEGER .1.3.6.1.4.1.89.87.10 |
rlCopyMirrorTimeoutThis MIB should be used in order to change the time-interval of automatic copy of
startup-config to mirror-config.
The MIB is for debugging purposes only, and given value should be the
number of minutes for time-interval of this copy.rw INTEGER .1.3.6.1.4.1.89.87.11 |
rlCopyOptionsTableThe table includes more field options for the copy operation. SEQUENCE OF RlCopyOptionsEntry .1.3.6.1.4.1.89.87.12 |
rlCopyOptionsEntryAn entry (conceptual row) in the rlCopyOptionsTable. RlCopyOptionsEntry .1.3.6.1.4.1.89.87.12.1 |
rlCopyOptionsIndexThe index should be equal to the value of rlCopyInetIndex of the relevant rlCopyInetEntry. Unsigned32 .1.3.6.1.4.1.89.87.12.1.1 |
rlCopyOptionsRequestedSsdAccessThe requested format for sensitive data in the copy. Relevant only for configuration file uploadrw RlCopySecSdAccessType .1.3.6.1.4.1.89.87.12.1.2 |
rlCopyMirror OBJECT IDENTIFIER .1.3.6.1.4.1.89.87.13 |
rlCopyMirrorEnableThis MIB should be used in order to enable/disable automatic copy of
startup-config to mirror-config.rw Enumeration .1.3.6.1.4.1.89.87.13.1 |
rlCopyStaticDowngradeStatusControls whether static downgrade in progressro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.87.14 |