LINKSYS-DEVICEPARAMS-MIB
AI MIB Summary
The LINKSYS-DEVICEPARAMS-MIB provides vendor-specific extensions for monitoring and configuring general operational parameters on Linksys network devices, including system resources, interface states, and device-specific configuration variables not covered by standard MIBs.
This private MIB module defines general Parameters private MIBs.
Main OID:
rndDeviceParams.1.3.6.1.4.1.89.2
65
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
65 total| Object Name |
|---|
rndDeviceParamsThis private MIB module defines general Parameters private MIBs. MODULE-IDENTITY .1.3.6.1.4.1.89.2 |
LINKSYS-MIBThis private MIB module defines general Parameters private MIBs. Unknown .1.3.6.1.4.1.89.2 |
rndBridgeTypeIdentification of the RND bridge type.ro Enumeration .1.3.6.1.4.1.89.2.1 |
rndInactiveArpTimeOutThis variable defines the maximum time period that can pass
between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table.rw INTEGER .1.3.6.1.4.1.89.2.2 |
rndBridgeAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.3 |
rndErrorDescA textual description of the enterprise-specific trap sent
to the Network Management Station by the RND managed device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.3.1 |
rndErrorSeverityThe severity type of the enterprise-specific trap sent to the
Network Management Station by the RND managed device.ro Enumeration .1.3.6.1.4.1.89.2.3.2 |
rndBrgVersionThe bridge version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.4 |
rndBrgFeaturesA bit mask that defines the features supported by a particular configuration
of this network element:
__________________________________________
| Byte 1|Byte 2 |Byte 3 | ....|Byte 20 |
|87654321| | 87654321|
|________|_______________________________|
Byte1 :
bit1: TX Block mask
bit2: Source Routing Encapulation
bit3: SNA/SDLC
bit4: Frame Relay
bit5: SNMP
bit6: LAN Manager
bit7: High Performance
bit8: Translation
Byte2 :
bit1: DEC Router
bit2: IPX Router
bit3: IP Router
Byte3 :
bit1: Dial Up Backup
bit2: COD
bit3: FACS
bit4: Load Balance
bit5: Remote Configuration
bit6: RIP 2
bit7: OSPF
bit8: IPX RIP/SAP Filter
Byte4 :
bit1: BootP Server
bit2: BootP Client
bit3: Compression
bit4: V25.bis
bit5: ISDN
bit6: CODv2
bit7: NSPF
bit8: UDP Relay
Byte5
bit1:VirtualLAN
bit2:Static IP Multicast
bit3:IP Redundancy
bit4:CCM2
bit5:ISDN Bonding
bit6:Backup Link Selection
bit7:IP/IPX Forwarding
bit8:Improved COD
Byte6
bit1: Server Disptacher
bit2: ISDN_US
bit3: PPP
bit4: IP Rip Filter
bit5: Zero Hop Routing
bit6: ISDN Japan
bit7: PPP-Security
Byte7
bit1: With unmanaged Switch
bit2: 2 LANs
bit3: OSPF Ver 2.0
bit4: FACS Ver 2.0
bit5: Multiple WEB Farm
bit6: Backup Server
bit7: Check Connectivity
bit8: WSD multiplexing
Byte8
bit1: MRT3
bit2: WSD Redundancy
bit3: DHCP Server
bit4: WSD Connection Limit
bit5: WSD Distributed System
bit6: WSD Load Report
bit7: WSD super farm
bit8: RadWiz leased line
Byte9
bit1: PPP IP address negotiaton
bit2: DNS
bit3: Nat
bit4: WSD Static proximity
bit5: WSD Dynamic proximity
bit6: WSD Proxy
bit7: WSD Proximity client
bit8: MAC Load balancing
Byte10
bit1: Unnum Inf
bit2: Power Supply redundancy
bit3: MRT PPP Compression
bit4: ZHR Apolo
bit5: Copy port
bit6: UDP Relay 2.0
bit7: NVRAM
bit8: URL table
Byte11
bit1: URL super farm
bit2: NAT on LAN
bit3: Remote Con
bit4: AP5000
bit5: Session tracking
bit6: Mirroring
bit7: Alias IP
bit8: CSD Nat
Byte12
bit1: content check
bit2: mlb virtual ip
bit3: reserved RadLan
bit4: csd nat exception
bit5: statistics monitor
bit6: reserved-for-radwarero OCTET STRING -- SIZE 20 .1.3.6.1.4.1.89.2.5 |
rndBrgLicenseThis parameter is used for entering a s/w license number for a device.
A separate license number is supplied for each device.rw OCTET STRING -- SIZE 20 .1.3.6.1.4.1.89.2.6 |
rndIpHost OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.7 |
rndCommunityTableThe community table of the agent SEQUENCE OF RndCommunityEntry .1.3.6.1.4.1.89.2.7.2 |
rndCommunityEntryThe row definition for this table. RndCommunityEntry .1.3.6.1.4.1.89.2.7.2.1 |
rndCommunityMngStationAddrThe management station that will be allowed to
communicate with the agent IP addressrw IpAddress .1.3.6.1.4.1.89.2.7.2.1.1 |
rndCommunityStringThe community string with which the management
station will communicate with the agentrw DisplayString .1.3.6.1.4.1.89.2.7.2.1.2 |
rndCommunityAccessThe allowed access to this management stationrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.3 |
rndCommunityTrapsEnableShould the agent send traps to the management station,
and what version is requiredrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.4 |
rndCommunityStatusThe status of this entry. If the status is invalid the
community entry will be deletedrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.5 |
rndCommunityPortSecurityIf enabled the device will only receive SNMP messages from the port,
through which this NMS is reachable from the device.rw Enumeration .1.3.6.1.4.1.89.2.7.2.1.6 |
rndCommunityOwnerThe owner of this communityrw DisplayString .1.3.6.1.4.1.89.2.7.2.1.7 |
rndCommunityTrapDestPortThe transport protocol (usually UDP) port to which traps to the
management station represebted by this entry will be sent. The default
is the well-known IANA assigned port number for SNMP traps.
This object is relevant only if rndCommunityTrapsEnable has a value
different from trapsDisable.rw INTEGER .1.3.6.1.4.1.89.2.7.2.1.8 |
rlMridTableThe MRID related configurations table of the agent SEQUENCE OF RlMridEntry .1.3.6.1.4.1.89.2.7.3 |
rlMridEntryThe row definition for this table. RlMridEntry .1.3.6.1.4.1.89.2.7.3.1 |
rlMridConnectionThe router instance connecting the NMS who accessed the agent
through the community table entry corresponding to the keys of this entry.rw INTEGER .1.3.6.1.4.1.89.2.7.3.1.1 |
rlManagedMridThe router instance currently managed by the NMS who accessed the agent
through the community table entry corresponding to the keys of this entryrw INTEGER .1.3.6.1.4.1.89.2.7.3.1.2 |
rndIpHostManagement OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.7.4 |
rndIpHostManagementSupportedifindex manage supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.2.7.4.1 |
rndIpHostManagementIfIndexif supported manage , indicate ifindex, if 0 thaen disablerw INTEGER .1.3.6.1.4.1.89.2.7.4.2 |
rndManagedTimeThe time will be sent in the format hhmmssrw DisplayString .1.3.6.1.4.1.89.2.8 |
rndManagedDateThe date will be sent in the format ddmmyyrw DisplayString .1.3.6.1.4.1.89.2.9 |
rndBaseBootVersionDefines the boot version of the product.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.10 |
genGroup OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.11 |
genGroupHWVersionDefines the HW version of the product.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.11.1 |
genGroupConfigurationSymbolDefines the Configuration Symbol attached to any hardware module
manufactured by LANNET. One single character A..Z defines the CS
version.ro DisplayString .1.3.6.1.4.1.89.2.11.2 |
genGroupHWStatusThis attribute describes the status of the group hardware as detected
by the sensors software.ro Enumeration .1.3.6.1.4.1.89.2.11.3 |
rndBasePhysicalAddressThe Base physical (MAC) address of the device.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.2.12 |
rndSoftwareFile OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.13 |
rndActiveSoftwareFileTableThe (conceptual) table listing the active software file of the
requested unit. SEQUENCE OF RndActiveSoftwareFileEntry .1.3.6.1.4.1.89.2.13.1 |
rndActiveSoftwareFileEntryAn entry (conceptual row) in the rndActiveSoftwareFileTable. RndActiveSoftwareFileEntry .1.3.6.1.4.1.89.2.13.1.1 |
rndUnitNumberThe unit number (for stackable devices) or 1 for 'stand alone' device.rw INTEGER .1.3.6.1.4.1.89.2.13.1.1.1 |
rndActiveSoftwareFileIndicates the current active software file, image1 or image2.ro RlImageIdType .1.3.6.1.4.1.89.2.13.1.1.2 |
rndActiveSoftwareFileAfterResetIndicates the software file that will be active after reset (image1 or image2).
If an error occurred in the download process, resulting in the corruption
of the single software file, The value 'invalidImage' will be returned.
This value can not be set by the user.rw Enumeration .1.3.6.1.4.1.89.2.13.1.1.3 |
rlResetStatusA bit mask that specifies system status before reset action is preformed.
Reset is prohibited in stackable products if the images selected after
reboot are not of the same release version in ALL stack units.
Downgrade status specifies that there are some actions to be preformed
on the CDB file before reset is preformed.
0x0 - OK
0x1 - noStackIntegrity
0x2 - downgradero Bits .1.3.6.1.4.1.89.2.13.2 |
rndImageSizeMax number of sectors currently allocated for image(s).ro INTEGER .1.3.6.1.4.1.89.2.14 |
rndBackupConfigurationEnabledSpecifies whether the device supports backup-config parameters in lcli commands.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.2.15 |
rndImageInfo OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.16 |
rndImageInfoTableThe table contains information about images. SEQUENCE OF RndImageInfoEntry .1.3.6.1.4.1.89.2.16.1 |
rndImageInfoEntryAn entry in the rndImageInfoTable. RndImageInfoEntry .1.3.6.1.4.1.89.2.16.1.1 |
rndStackUnitNumberThe unit number (for stackable devices) or 1 for 'stand alone' device.rw INTEGER .1.3.6.1.4.1.89.2.16.1.1.1 |
rndImage1NameIndicates the file name of image-1 in the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.2 |
rndImage2NameIndicates the file name of image-2 (if present) in the system.If image-2 is not present show 'no info' textro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.3 |
rndImage1VersionIndicates the version of image-1 in the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.4 |
rndImage2VersionIndicates the version of image-2 (if present) in the system.If image-2 is not present show 'no info' textro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.5 |
rndImage1DateIndicates the compilation date of image-1 in the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.6 |
rndImage2DateIndicates the compilation date of image-2 (if present) in the system.If image-2 is not present show 'no info' textro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.7 |
rndImage1TimeIndicates the compilation time of image-1 in the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.8 |
rndImage2TimeIndicates the compilation time of image-2 (if present) in the system.If image-2 is not present show 'no info' textro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.9 |
rndImage1DescriptionIndicates the description of image-1 in the system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.10 |
rndImage2DescriptionIndicates the description of image-2 in the system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.11 |
rlComponentsInfoTableThe table contains information about components, their streams and baselines in the device images. SEQUENCE OF RlComponentsInfoEntry .1.3.6.1.4.1.89.2.16.2 |
rlComponentsInfoEntryAn entry in the rlComponentsInfoTable. RlComponentsInfoEntry .1.3.6.1.4.1.89.2.16.2.1 |
rlComponentsInfoStackUnitNumberThe unit number (for stackable devices) or 1 for 'stand alone' device. INTEGER .1.3.6.1.4.1.89.2.16.2.1.1 |
rlComponentsInfoImageIdIndicates the image id in the unit RlImageIdType .1.3.6.1.4.1.89.2.16.2.1.2 |
rlComponentsInfoComponentIndicates the SW component name. DisplayString .1.3.6.1.4.1.89.2.16.2.1.3 |
rlComponentsInfoBaselineIndicates the version control baseline of the SW component name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.2.1.5 |