LIEBERT-GP-AGENT-MIB
The LIEBERT-GP-AGENT-MIB defines the SNMP Object Identifiers for monitoring and managing Liebert GP-series power and environmental control systems, enabling the retrieval of operational status, sensor telemetry, and device configuration parameters. This module facilitates the collection of critical infrastructure metrics such as temperature, humidity, voltage, current, and alarm states from Liebert's intelligent power distribution and cooling units.
Imported Objects
Objects
21 total| Object Name |
|---|
liebertAgentModuleThe MIB module used to specify Liebert software or firmware
agent SNMP OIDs.
Copyright 2000-2004 Liebert Corporation. All rights reserved.
Reproduction of this document is authorized on the condition
that the forgoing copyright notice is included.
This Specification is supplied 'AS IS' and Liebert Corporation
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.476.1.42.1.2.1 |
RFC1213-MIBThe MIB module used to specify Liebert software or firmware
agent SNMP OIDs.
Copyright 2000-2004 Liebert Corporation. All rights reserved.
Reproduction of this document is authorized on the condition
that the forgoing copyright notice is included.
This Specification is supplied 'AS IS' and Liebert Corporation
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. Unknown .1.3.6.1.4.1.476.1.42.1.2.1 |
lgpAgentIdentManufacturerThe agent manufacturer.ro DisplayString .1.3.6.1.4.1.476.1.42.2.1.1 |
lgpAgentIdentModelThe agent model designation. This identifer is typically a
model name or IDro DisplayString .1.3.6.1.4.1.476.1.42.2.1.2 |
lgpAgentIdentFirmwareVersionThe firmware revision level of the agent.ro DisplayString .1.3.6.1.4.1.476.1.42.2.1.3 |
lgpAgentIdentSerialNumberThe serial number of the agent. This is a string of
alphanumeric characters that uniquely identifies the agent hardware. This
number is assigned when the agent hardware is manufactured and does not
change throughout its lifecycle.ro DisplayString .1.3.6.1.4.1.476.1.42.2.1.4 |
lgpAgentEventNotificationsAgent specific notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.476.1.42.2.3.0 |
lgpAgentDeviceCommunicationLostThe agent has lost communications with a managed device. NOTIFICATION-TYPE .1.3.6.1.4.1.476.1.42.2.3.0.1 |
lgpAgentManagedDeviceTableThis table contains one entry for each managed device. SEQUENCE OF LgpAgentManagedDeviceEntry .1.3.6.1.4.1.476.1.42.2.4.2 |
lgpAgentManagedDeviceEntryThis entry describes a row in the table
'lgpAgentManagedDeviceTable'. The rows in this table cannot
be created by the NMS. The rows are automatically created by
the agent based upon the hardware configuration of the
Liebert managed device(s) being monitored with this agent. LgpAgentManagedDeviceEntry .1.3.6.1.4.1.476.1.42.2.4.2.1 |
lgpAgentDeviceIndexThe device identifier. This is used as an index to address
a particular row in the table 'lgpAgentManagedDeviceTable'.ro INTEGER .1.3.6.1.4.1.476.1.42.2.4.2.1.1 |
lgpAgentDeviceIdThe managed device specific identifier defined by the
product registration.ro OBJECT IDENTIFIER .1.3.6.1.4.1.476.1.42.2.4.2.1.2 |
lgpAgentDeviceManufacturerThe managed device manufacturer.ro DisplayString .1.3.6.1.4.1.476.1.42.2.4.2.1.3 |
lgpAgentDeviceModelThe managed device model designation.ro DisplayString .1.3.6.1.4.1.476.1.42.2.4.2.1.4 |
lgpAgentDeviceFirmwareVersionThe firmware revision level of the managed device.ro DisplayString .1.3.6.1.4.1.476.1.42.2.4.2.1.5 |
lgpAgentDeviceUnitNumberThe managed device unit number. Typically this is a
number assigned to a managed device that uniquely identifies it from
other similar devices within a 'system'.rw Integer32 .1.3.6.1.4.1.476.1.42.2.4.2.1.6 |
lgpAgentDeviceSerialNumberThe serial number of the managed device.ro DisplayString .1.3.6.1.4.1.476.1.42.2.4.2.1.7 |
lgpAgentDeviceManufactureDateThe manufacture date of the managed device.ro DisplayString .1.3.6.1.4.1.476.1.42.2.4.2.1.8 |
lgpAgentDeviceServiceContactThe service contact of the managed device.rw DisplayString .1.3.6.1.4.1.476.1.42.2.4.2.1.9 |
lgpAgentDeviceServicePhoneNumberThe phone number of the service contact of the managed device.rw DisplayString .1.3.6.1.4.1.476.1.42.2.4.2.1.10 |
lgpAgentRebootPerform an immediate 'reboot' of the agent process. When possible
the reboot will approximate a power on reset of the agent
communications hardware. This type of reboot will be performed if
a hardware reset is supported by the hardware/software on the
communications card. Otherwise a 'software' reboot will be executed.
In both cases a temporary loss of communications and other agent
functionality will result.
Any valid INTEGER value may be written to this object to initiate
the reboot operation.
If read the value '0' will always be returned.rw Integer32 .1.3.6.1.4.1.476.1.42.2.5.1 |
More MIBs from Liebert
Browse all LiebertMIBs →The LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB enables SNMP-based monitoring and management of Liebert GP series power and environmental control units, specifically exposing configurable alarm thresholds and conditional logic states for critical infrastructure parameters. This module facilitates the retrieval of dynamic condition variables and event triggers to automate fault detection and response within data center power distribution and cooling systems.
The LIEBERT-GP-CONDITIONS-MIB defines the Liebert-specific Object Identifiers required to monitor environmental conditions and operational states of Liebert GP series power and cooling infrastructure. This module enables the retrieval of critical telemetry data, including temperature, humidity, and alarm status, from Liebert network management agents via the SNMP protocol.
The LIEBERT-GP-ENVIRONMENTAL-MIB enables SNMP-based monitoring of Liebert GP-series precision cooling units and environmental control systems, specifically exposing metrics for temperature, humidity, airflow, and alarm states. This module facilitates the collection of critical facility infrastructure data required for data center thermal management and environmental fault detection.
Standard SNMP MIB module defining data structures for LIEBERT-UPS-MIB.
The LIEBERT-GP-POWER-MIB enables SNMP monitoring of Liebert GP-series power distribution units and UPS systems, exposing critical metrics such as input/output voltage, current, frequency, load percentage, battery status, and alarm conditions. This module facilitates real-time telemetry collection for power infrastructure health assessment and fault detection within data center environments.
SNMP MIB module