ISKRATEL-MSAN-MIB
AI MIB Summary
The ISKRATEL-MSAN-MIB module facilitates the monitoring and management of Iskratel Multi-Service Access Network (MSAN) hardware, specifically tracking DSL line states, port statistics, and system resource utilization. It enables administrators to retrieve critical performance metrics such as active session counts, error rates, and temperature readings for troubleshooting and capacity planning in broadband access networks.
Description.
Main OID:
msan.1.3.6.1.4.1.1332.1.1.5
1592
Objects
Active
Status
11
Dependencies
Imported Objects
Objects
1592 total| Object Name |
|---|
iskratel OBJECT IDENTIFIER .1.3.6.1.4.1.1332 |
si2000 OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1 |
msanDescription. MODULE-IDENTITY .1.3.6.1.4.1.1332.1.1.5 |
msanInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.1 |
msanShelfInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.1.1 |
msanShelfIdMSAN shelf ID.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.1.1 |
msanShelfTypeMSAN shelf type.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.1.2 |
msanShelfSizeSize of MSAN shelf (in number of slots).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.1.1.3 |
msanBoardInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.1.2 |
msanBoardTableDescription.deprecated SEQUENCE OF MsanBoardEntry .1.3.6.1.4.1.1332.1.1.5.1.2.1 |
msanBoardEntryDescription.deprecated MsanBoardEntry .1.3.6.1.4.1.1332.1.1.5.1.2.1.1 |
msanBoardNrUnique identification of a board.deprecated INTEGER .1.3.6.1.4.1.1332.1.1.5.1.2.1.1.1 |
msanBoardParentNrUnique identification of a parent board.rodeprecated INTEGER .1.3.6.1.4.1.1332.1.1.5.1.2.1.1.2 |
msanBoardPositionPosition of the board on the parent board.rodeprecated INTEGER .1.3.6.1.4.1.1332.1.1.5.1.2.1.1.3 |
msanBoardTypeType of physical board (e.g. IDC, SGO, SFA, ...)rodeprecated OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.2.1.1.4 |
msanBoardIdName (actual identification) of a board.rodeprecated OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.2.1.1.5 |
msanBoardSerialNrSerial number of a board.rodeprecated OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.2.1.1.6 |
msanBoardDescriptionDescription of the board.rwdeprecated OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.2.1.1.7 |
msanSwInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.1.3 |
msanSwSteerVersionThe unique steer code for this software.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.1 |
msanSwBuildDirectoryThe directory where software was build on.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.2 |
msanSwBuildTimeThe time when the software was built. (DateAndTime textual convention, from SNMPv2-TC)ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.3 |
msanSwBranchThe repository branch where the software was built from.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.4 |
msanSwBuildReferenceThe repository reference number of the software build branch.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.1.3.5 |
msanSwILVersionThe unique IL steer code for this software.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.6 |
msanSwIpmiVersionThe major version.minor version/IPMI version supported(HEX) number of the IPMI currently running on the switch.
For example, if the major version was 1 and the minor version was 2, the format would be '1.2/0'.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.7 |
msanSwBspVersionThe release.version/id number of the BSP software currently running on the switch.
For example, if the release was 1 and the version was 2, the format would be '1.2/0'.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.8 |
msanSwCPLDVersionCPLD (Complex Programmable Logic Device) SW versionro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.9 |
msanReservePackageName of the reserve package on disk if it exists.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.10 |
msanSwComponentTableDescription. SEQUENCE OF MsanSwComponentEntry .1.3.6.1.4.1.1332.1.1.5.1.3.11 |
msanSwComponentEntryDescription. MsanSwComponentEntry .1.3.6.1.4.1.1332.1.1.5.1.3.11.1 |
msanSwComponentIdUnique index of SW component. Integer32 .1.3.6.1.4.1.1332.1.1.5.1.3.11.1.1 |
msanSwComponentNameName of software component (e.g. ES, EV, EF, EA).ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.11.1.2 |
msanSwComponentSteerVersionThe unique steer code for this software component.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.3.11.1.3 |
msanOtherInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.1.4 |
msanSnmpSetErrorReasonLast error description of SNMP set command.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.1.4.1 |
msanAdditionalConf OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3 |
msanSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.1 |
msanDateTimeBoard date and time in format: dd/MM/yyyy HH:mm:ss.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.1.1 |
msanShelfIdConfMSAN Shelf ID.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.1.2 |
msanConfDataConfigured data saved or not saved to file on local file system.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.1.3 |
msanSwUpgrademsanSWUpgrade parameetr is used to start SW upgrade from external http or ftp server.
User must set the next string value: <repository URL> <package name>
<repository URL> = http|ftp://<IP>|<hostname>[:<port>]/[<path>/]
Procedure uses anonymous type of identification.
If a non standard port is used, this port must be also specified in the repository URL.rwdeprecated OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.1.4 |
msanCliScriptCreateWhen set with a non-empty string, current configuration will be saved to script file with that name
(name must end with .scr).
If file already exists it's overwritten.
On Get request this object will always return an empty string.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.1.5 |
msanCliScriptTableDescription. SEQUENCE OF MsanCliScriptEntry .1.3.6.1.4.1.1332.1.1.5.3.1.6 |
msanCliScriptEntryDescription. MsanCliScriptEntry .1.3.6.1.4.1.1332.1.1.5.3.1.6.1 |
msanCliScriptNameCLI script name OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.1.6.1.1 |
msanCliScriptApplyWhen set to enable(1) selected selected CLI script is applied.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.1.6.1.2 |
msanCliScriptApplyStatusStatus of CLI script apply requestro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.1.6.1.3 |
msanCliScriptRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.6.1.4 |
msanCliPromptCLI prompt value.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.1.7 |
msanChassisIdMSAN Chassis ID.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.1.8 |
msanSwBootPackageTableDescription. SEQUENCE OF MsanSwBootPackageEntry .1.3.6.1.4.1.1332.1.1.5.3.1.9 |
msanSwBootPackageEntryDescription. MsanSwBootPackageEntry .1.3.6.1.4.1.1332.1.1.5.3.1.9.1 |
msanSwBootPackageNameSW package name on local disk.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.9.1.1 |
msanSwBootPackageStatusSW package status.
You can set only nextActive(2) value. Other values are read-only.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.1.9.1.2 |
msanSystemSwUpgrade OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.1.10 |
msanSystemSwUpgradeStartControl of SW upgrade procedure.
When set to enable(1) transfer of SW package from defined server is started.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.1.10.1 |
msanSystemSwUpgradeStatusThe SW upgrade status info.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.1.10.2 |
msanSystemSwUpgradeServerIpAddressTypeSpecifies the type of the upgrade server address: ipv4[1], ipv6[2].rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.1.10.3 |
msanSystemSwUpgradeServerIpAddressThe remote SW upgrade server IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.1.10.4 |
msanSystemSwUpgradeServerDnsNameThe remote SW upgrade server dns name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.10.5 |
msanSystemSwUpgradeProtocolThe SW upgrade protocol.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.1.10.6 |
msanSystemSwUpgradeProtocolPortIdThe SW upgrade protocol port number.
If value is set to -1, standard protocol number is used.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.1.10.7 |
msanSystemSwUpgradeUserNameThe username used in SW upgrade protocol.
When sftp upgrade protocol is used, username must be set.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.10.8 |
msanSystemSwUpgradeUserPasswordThe user password used in SW upgrade protocol.
When sftp upgrade protocol is used, username must be set.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.10.9 |
msanSystemSwUpgradePathThe path to the SW package location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.10.10 |
msanSystemSwUpgradePackageNameThe SW package namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.10.11 |
msanSystemLogsUpload OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.1.11 |
msanSystemLogsUploadStartControl of system logs upload procedure.
When set to enable(1) transfer of file to defined server is started.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.1.11.1 |
msanSystemLogsUploadStatusThe system logs upload status info.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.1.11.2 |
msanSystemLogsUploadServerIpAddressTypeSpecifies the type of the system logs upload server address: ipv4[1], ipv6[2].rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.1.11.3 |
msanSystemLogsUploadServerIpAddressThe remote system logs upload server IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.1.11.4 |
msanSystemLogsUploadServerDnsNameThe remote system logs upload server dns name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.11.5 |
msanSystemLogsUploadProtocolThe system logs upload protocol.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.1.11.6 |
msanSystemLogsUploadProtocolPortIdThe system logs upload protocol port number.
If value is set to -1, standard protocol number is used.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.1.11.7 |
msanSystemLogsUploadUserNameThe username used in system logs upload protocol.
When sftp upgrade protocol is used, username must be set.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.11.8 |
msanSystemLogsUploadUserPasswordThe user password used in system logs upload protocol.
When sftp upgrade protocol is used, username must be set.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.11.9 |
msanSystemLogsUploadPathThe path to the system logs file location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.11.10 |
msanSystemLogsUploadFileNameThe system logs file namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.1.11.11 |
msanProfiles OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.3 |
msanVDSLProfileTableDescription. SEQUENCE OF MsanVDSLProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.1 |
msanVDSLProfileEntryDescription. MsanVDSLProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.1.1 |
msanVDSLProfileTypeProfile type:
- other ~ none of the following
- defaut ~ default profile
- local ~ local configured profile type
- global ~ global configured profile typerw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.1.1.1 |
msanVDSL2LineProfileVDSL2 profilerw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.1.1.2 |
msanServiceProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.3.2 |
msanServiceProfileTableService Profile table SEQUENCE OF MsanServiceProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.2.1 |
msanServiceProfileEntryService Profile table entry. MsanServiceProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1 |
msanServiceProfileNameName for service profile. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.1 |
msanServiceProfileProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanServiceProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.2 |
msanServiceProfileStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.3 |
msanServiceProfileServiceFlowProfileNameIndex of used service flow profile (this profile must be set before), which indicates
row in msanServiceFlowProfileTable.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.4 |
msanServiceProfileMulticastProfileNameIndex of used multicast profile (this profile must be set before), which indicates
row in msanMulticastProfileTable.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.5 |
msanServiceProfileVlanProfileNameIndex of used vlan profile (this profile must be set before), which indicates
row in msanVlanProfileTable.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.6 |
msanServiceProfileL2cpProfileNameIndex of used L2CP profile (this profile must be set before), which indicates
row in msanL2cpProfileTable.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.7 |
msanServiceProfileSecurityProfileNameIndex of used security profile (this profile must be set before), which indicates
row in msanSecurityProfileTable.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.8 |
msanServiceProfileAtmVpiVirtual Path Identifier.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..255) .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.9 |
msanServiceProfileAtmVciVirtual Channel Identifier.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1 | 32..255) .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.10 |
msanServiceProfileDhcpRaDynamic Host Configuration Protocol Relay Agent.
DHCP RA and PPPoE IA can not be included simultaneously.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.11 |
msanServiceProfileDhcpRaTrustClientsDHCP RA Trust Clients.
Effective only if DHCP-RA is in either allow-all or allow-client mode.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.12 |
msanServiceProfileDhcpRaOpt82UnicastExtensionDHCP RA option82 unicast extension.
Effective only if DHCP-RA is in either allow-all or allow-client mode.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.13 |
msanServiceProfileDhcpRaOpt82InsertDHCP Relay Agent Insert Option 82.
Effective only if DHCP-RA is in either allow-all or allow-client mode.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.14 |
msanServiceProfileDhcpRaRemoteIdDHCP Relay Agent Remote Identification.
Effective only if DHCP-RA is in either allow-all or allow-client mode.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.15 |
msanServiceProfileDhcpRaRateLimitMax rate for DHCP Relay Agent.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.16 |
msanServiceProfilePppoeIAPoint-to-Point Protocol over Ethernet Intermediate Agent.
DHCP RA and PPPoE IA can not be included simultaneously.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.17 |
msanServiceProfilePppoeIARateLimitMax rate for PPPoE IA.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.18 |
msanServiceProfileDescriptionAttribute specifies text which describes the associated object.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.19 |
msanServiceProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
Value active(1) will activate and value destroy(6) will remove this entry.
Other values are currently not supported.
Row can be activated only if msanServiceProfileServiceFlowProfileName is specified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.20 |
msanServicePortProfileTableA connection between service profiles and device ports SEQUENCE OF MsanServicePortProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.2.2 |
msanServicePortProfileEntryService Profile Port table entry. MsanServicePortProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.2.2.1 |
msanServicePortProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.2.2.1.1 |
msanServiceFlowProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.3.3 |
msanServiceFlowProfileTableService Flow Profile table SEQUENCE OF MsanServiceFlowProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.3.1 |
msanServiceFlowProfileEntryService Flow Profile table entry. MsanServiceFlowProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1 |
msanServiceFlowProfileNameService Flow Profile Name. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.1 |
msanServiceFlowProfileProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanServiceFlowProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.2 |
msanServiceFlowProfileStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.3 |
msanServiceFlowProfileMatchUsAnyMatch every upstream packet frame.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.4 |
msanServiceFlowProfileMatchUsMacDestAddrMatch upstream packet frame with specified destination MAC address.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.5 |
msanServiceFlowProfileMatchUsMacDestMaskThis mask value identifies the portion of msanServiceFlowProfileMatchUsMacDestAddr
that is compared with upstream packet.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.6 |
msanServiceFlowProfileMatchUsMacSrcAddrMatch upstream packet frame with specified source MAC address.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.7 |
msanServiceFlowProfileMatchUsMacSrcMaskThis mask value identifies the portion of msanServiceFlowProfileMatchUsMacSrcAddr
that is compared with upstream packet.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.8 |
msanServiceFlowProfileMatchUsCPcpMatch upstream packet frame with specified Customer PCP (Priority Code Point) -
PCP is also known as class of service (CoS) bits.
A value of -1 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.9 |
msanServiceFlowProfileMatchUsSPcpMatch upstream packet frame with specified Service PCP (Priority Code Point).
PCP is also known as class of service (CoS) bits.
A value of -1 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.10 |
msanServiceFlowProfileMatchUsVlanProfileMatch upstream packet frame with VLAN Id values from VLAN Service Profile (msanVlanProfileTable).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.11 |
msanServiceFlowProfileMatchUsCVlanIdRangeMatch upstream packet frame with specified list (bitmask) of Customer VLAN Id.
An empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.12 |
msanServiceFlowProfileMatchUsSVlanIdRangeMatch upstream packet frame with specified list (bitmask) of Service VLAN Id.
An empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.13 |
msanServiceFlowProfileMatchUsEthertypeMatch upstream packet frame with specified EtherType value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.14 |
msanServiceFlowProfileMatchUsIpProtocolMatch upstream packet frame with specified IP protocol value.
A value of -1 indicates that parameter has not been defined.
Some of standard protocol values:
icmp - 1
igmp - 2
ip - 4 (ip in ip encapsulation)
tcp - 6
udp - 17rw Integer32 (-1..255) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.15 |
msanServiceFlowProfileMatchUsIpSrcAddrMatch upstream packet frame with specified source IP address.
Empty string indicates that parameter has not been defined.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.16 |
msanServiceFlowProfileMatchUsIpSrcMaskThis mask value identifies the portion of msanServiceFlowProfileMatchUsIpSrcAddr
that is compared with upstream packet.
Empty string indicates that parameter has not been definedrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.17 |
msanServiceFlowProfileMatchUsIpDestAddrMatch upstream packet frame with specified destination IP address.
Empty string indicates that parameter has not been defined.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.18 |
msanServiceFlowProfileMatchUsIpDestMaskThis mask value identifies the portion of msanServiceFlowProfileMatchUsIpDestAddr
that is compared with upstream packet.
Empty string indicates that parameter has not been definedrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.19 |
msanServiceFlowProfileMatchUsIpDscpMatch upstream packet frame with specified CSC (Class Selector Code Point) = IP precedence (part of TOS field) value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..63) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.20 |
msanServiceFlowProfileMatchUsIpCscMatch upstream packet frame with specified IP precedence (part of TOS field) value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.21 |
msanServiceFlowProfileMatchUsIpDropPrecedenceMatch upstream packet frame with specified Drop precedence two bits value:
noDrop(0) -> 00
lowDrop(1) -> 01
mediumDrop(2) -> 10
highDrop(3) -> 11
A value of -1 indicates that parameter has not been defined.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.22 |
msanServiceFlowProfileMatchUsTcpSrcPortMatch upstream packet frame with specified source TCP port number.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.23 |
msanServiceFlowProfileMatchUsTcpDestPortMatch upstream packet frame with specified destination TCP port number.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.24 |
msanServiceFlowProfileMatchUsUdpSrcPortMatch upstream packet frame with specified source UDP port number.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.25 |
msanServiceFlowProfileMatchUsUdpDstPortMatch upstream packet frame with specified destination UDP port number.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.26 |
msanServiceFlowProfileMatchDsAnyMatch every downstream packet frame.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.27 |
msanServiceFlowProfileMatchDsMacDestAddrMatch downstream packet frame with specified destination MAC address.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.28 |
msanServiceFlowProfileMatchDsMacDestMaskThis mask value identifies the portion of msanServiceFlowProfileMatchDsMacDestAddr
that is compared with downstream packet.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.29 |
msanServiceFlowProfileMatchDsMacSrcAddrMatch downstream packet frame with specified source MAC address.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.30 |
msanServiceFlowProfileMatchDsMacSrcMaskThis mask value identifies the portion of msanServiceFlowProfileMatchDsMacSrcAddr
that is compared with downstream packet.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.31 |
msanServiceFlowProfileMatchDsCPcpMatch downstream packet frame with specified Customer PCP (Priority Code Point) -
PCP is also known as class of service (CoS) bits.
A value of -1 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.32 |
msanServiceFlowProfileMatchDsSPcpMatch downstream packet frame with specified Service PCP (Priority Code Point).
PCP is also known as class of service (CoS) bits.
A value of -1 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.33 |
msanServiceFlowProfileMatchDsVlanProfileMatch downstream packet frame with VLAN Id values from VLAN Service Profile (msanVlanProfileTable).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.34 |
msanServiceFlowProfileMatchDsCVlanIdRangeMatch downstream packet frame with specified list (bitmask) of Customer VLAN Id.
An emptya string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.35 |
msanServiceFlowProfileMatchDsSVlanIdRangeMatch downstream packet frame with specified list (bitmask) of Service VLAN Id.
An empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.36 |
msanServiceFlowProfileMatchDsEthertypeMatch downstream packet frame with specified EtherType value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.37 |
msanServiceFlowProfileMatchDsIpProtocolMatch downstream packet frame with specified IP protocol value.
A value of -1 indicates that parameter has not been defined.
Some of standard protocol values:
icmp - 1
igmp - 2
ip - 4 (ip in ip encapsulation)
tcp - 6
udp - 17rw Integer32 (-1..255) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.38 |
msanServiceFlowProfileMatchDsIpSrcAddrMatch downstream packet frame with specified source IP address.
Empty string indicates that parameter has not been defined.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.39 |
msanServiceFlowProfileMatchDsIpSrcMaskThis mask value identifies the portion of msanServiceFlowProfileMatchDsIpSrcAddr
that is compared with downstream packet.
Empty string indicates that parameter has not been definedrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.40 |
msanServiceFlowProfileMatchDsIpDestAddrMatch downstream packet frame with specified destination IP address.
Empty string indicates that parameter has not been defined.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.41 |
msanServiceFlowProfileMatchDsIpDestMaskThis mask value identifies the portion of msanServiceFlowProfileMatchDsIpDestAddr
that is compared with downstream packet.
Empty string indicates that parameter has not been definedrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.42 |
msanServiceFlowProfileMatchDsIpDscpMatch downstream packet frame with specified IP DSCP value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..63) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.43 |
msanServiceFlowProfileMatchDsIpCscMatch downstream packet frame with specified CSC (Class Selector Code Point) = IP precedence (part of TOS field) value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.44 |
msanServiceFlowProfileMatchDsIpDropPrecedenceMatch downstream packet frame with specified Drop precedence two bits value:
noDrop(0) -> 00
lowDrop(1) -> 01
mediumDrop(2) -> 10
highDrop(3) -> 11
A value of -1 indicates that parameter has not been defined.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.45 |
msanServiceFlowProfileMatchDsTcpSrcPortMatch downstream packet frame with specified source TCP port number.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.46 |
msanServiceFlowProfileMatchDsTcpDestPortMatch downstream packet frame with specified destination TCP port number.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.47 |
msanServiceFlowProfileMatchDsUdpSrcPortMatch downstream packet frame with specified source UDP port number.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.48 |
msanServiceFlowProfileMatchDsUdpDstPortMatch downstream packet frame with specified destination UDP port number.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.49 |
msanServiceFlowProfileUsCdrUpstream committed data rate (E-CDR) in kbps (0 1000000).rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.50 |
msanServiceFlowProfileUsCdrBurstSizeUpstream committed data rate burst size in kB (0 16384).
When parameter is set to 0 (default), it's automatically updated to default
burst size in according with current msanQoSProfileInCdr value.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.51 |
msanServiceFlowProfileUsPdrUpstream peak data rate (E-PDR) in kbps (0 1000000).rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.52 |
msanServiceFlowProfileUsPdrBurstSizeUpstream peak data rate burst size in kB (0 16384).
When parameter is set to 0 (default), it's automatically updated to default
burst size in according with current msanQoSProfileInPdr value.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.53 |
msanServiceFlowProfileUsMarkPcpType of upstrem PCP marking.
If set to userValue(3), parameter msanServiceFlowProfileUsMarkPcpValue is used.
A value of none(1) indicates that parameter has not been definedrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.54 |
msanServiceFlowProfileUsMarkPcpValueMark upstream packets with specified PCP (Priority Code Point) value (0-7) = CoS.
A value of -1 indicates that parameter has not been definedrw INTEGER (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.55 |
msanServiceFlowProfileUsMarkDscpType of upstrem DSCP marking.
If set to userValue(3), parameter msanServiceFlowProfileUsMarkDscpValue is used.
A value of none(1) indicates that parameter has not been definedrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.56 |
msanServiceFlowProfileUsMarkDscpValueMark upstream packets with specified DSCP (Diffserv Code Point) value (0-63).
A value of -1 indicates that parameter has not been definedrw INTEGER (-1..63) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.57 |
msanServiceFlowProfileDsCdrDownstream committed data rate (E-CDR) in kbps (0 1000000).rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.58 |
msanServiceFlowProfileDsCdrBurstSizeDownstream committed data rate burst size in kB (0 16384).
When parameter is set to 0 (default), it's automatically updated to default
burst size in according with current msanQoSProfileOutCdr value.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.59 |
msanServiceFlowProfileDsPdrDownstream peak data rate (E-PDR) in kbps (0 1000000).rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.60 |
msanServiceFlowProfileDsPdrBurstSizeDownstream peak data rate burst size in kB (0 16384).
When parameter is set to 0 (default), it's automatically updated to default
burst size in according with current msanQoSProfileOutCdr value.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.61 |
msanServiceFlowProfileDsMarkPcpType of downstream PCP marking.
If set to userValue(3), parameter msanServiceFlowProfileDsMarkPcpValue is used.
A value of none(1) indicates that parameter has not been definedrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.62 |
msanServiceFlowProfileDsMarkPcpValueMark downstream packets with specified PCP (Priority Code Point) value (0-7) = CoS.
A value of -1 indicates that parameter has not been definedrw INTEGER (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.63 |
msanServiceFlowProfileDsMarkDscpType of downstrem DSCP marking.
If set to userValue(3), parameter msanServiceFlowProfileDsMarkDscpValue is used.
A value of none(1) indicates that parameter has not been definedrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.64 |
msanServiceFlowProfileDsMarkDscpValueMark downstream packets with specified DSCP (Diffserv Code Point) value (0-63).
A value of -1 indicates that parameter has not been definedrw INTEGER (-1..63) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.65 |
msanServiceFlowProfileDsQueuingPriorityQueuing Priority of Service Flow Profile.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.66 |
msanServiceFlowProfileDsSchedulingModeScheduling Moderw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.67 |
msanServiceFlowProfileDescriptionAttribute specifies text which describes the associated object.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.68 |
msanServiceFlowProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.69 |
msanVlanProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.3.4 |
msanVlanProfileTableVlan Profile table SEQUENCE OF MsanVlanProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.4.1 |
msanVlanProfileEntryVlan Profile table entry. MsanVlanProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1 |
msanVlanProfileNameName for the VLAN profile. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.1 |
msanVlanProfileProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanVlanProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.2 |
msanVlanProfileStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.3 |
msanVlanProfileCVidCustomer VLANs Identification (bit mask).rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.4 |
msanVlanProfileCVidNativeNativ C-VLAN Id.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..4094) .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.5 |
msanVlanProfileCVidRemarkRemark C-VLAN Id.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..4094) .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.6 |
msanVlanProfileSVidS-VLAN Id.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..4094) .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.7 |
msanVlanProfileSEtherTypeEther Type value.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.8 |
msanVlanProfileDescriptionAttribute specifies text which describes the associated object.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.10 |
msanVlanProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.11 |
msanVlanProfileNetworkPortCTagUsage of C-VLAN tag on network port.
If assigned as notUse(2) in upstream direction, C-VLAN tag is removed.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.12 |
msanVlanPortProfileTableA connection between VLAN profiles and device ports SEQUENCE OF MsanVlanPortProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.4.2 |
msanVlanPortProfileEntryService Profile Port table entry. MsanVlanPortProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.4.2.1 |
msanVlanPortProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.4.2.1.1 |
msanMulticastProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.3.5 |
msanMulticastProfileTableMulticast Profile table SEQUENCE OF MsanMulticastProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.5.1 |
msanMulticastProfileEntryMulticast Profile table entry. MsanMulticastProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1 |
msanMulticastProfileNameName for the Multicast profile. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.1 |
msanMulticastProfileProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanMulticastProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.2 |
msanMulticastProfileStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.3 |
msanMulticastProfileIgmpSnoopingIGMP snnopingrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.4 |
msanMulticastProfileIgmpSnoopingFastLeaveIGMP Snooping Fast Leave.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.5 |
msanMulticastProfileIgmpSnoopingSuppressionIGMP Snooping Suppression.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.6 |
msanMulticastProfileIgmpProxyIGMP proxy.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.7 |
msanMulticastProfileIgmpProxyIpAddressIGMP proxy IP address.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.8 |
msanMulticastProfileIgmpFilteringIGMP filtering.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.9 |
msanMulticastProfileMulticastGroupLimitMulticast group limit.
A value of 0 indicates not limit.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.10 |
msanMulticastProfileMvrMulticast VLAN Registration.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.11 |
msanMulticastProfileDescriptionAttribute specifies text which describes the associated object.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.12 |
msanMulticastProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.13 |
msanMulticastProfileStaticGroupTableConnection between
multicast_profile and multicast_static_group table SEQUENCE OF MsanMulticastProfileStaticGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.3.5.2 |
msanMulticastProfileStaticGroupEntryMulticast Profile Group table entry. MsanMulticastProfileStaticGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.3.5.2.1 |
msanMulticastProfileStaticGroupIpAddrDescription. IpAddress .1.3.6.1.4.1.1332.1.1.5.3.3.5.2.1.1 |
msanMulticastProfileStaticGroupRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.5.2.1.9 |
msanSecurityProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.3.6 |
msanSecurityProfileTableSecurity Profile table SEQUENCE OF MsanSecurityProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.6.1 |
msanSecurityProfileEntrySecurity Profile table entry. MsanSecurityProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1 |
msanSecurityProfileNameName of the security profile. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.1 |
msanSecurityProfileProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanSecurityProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.2 |
msanSecurityProfileStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.3 |
msanSecurityProfileProtectedPortSecurity profile protected portrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.4 |
msanSecurityProfileMacSgMac source guardrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.5 |
msanSecurityProfileMacLimitMAC limit
A value of 0 indicates that parameter has not been defined.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.6 |
msanSecurityProfilePortSecurityPort securityrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.7 |
msanSecurityProfileIpSgIP source guardrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.8 |
msanSecurityProfileIpSgBindingLimitIP source guard binding limit.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.9 |
msanSecurityProfileIpSgFilteringModeIP source guard filtering moderw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.10 |
msanSecurityProfileArpInspecDynamic ARP inspectionrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.12 |
msanSecurityProfileMacForwardMAC forwardingrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.13 |
msanSecurityProfileDescriptionAttribute specifies text which describes the associated object.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.14 |
msanSecurityProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.15 |
msanSecurityAclProfileTableA connection between security profiles and access lists SEQUENCE OF MsanSecurityAclProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.6.3 |
msanSecurityAclProfileEntryService Profile Port table entry. MsanSecurityAclProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1 |
msanSecurityAclProfileAclDirectionThe direction to which this ACL instance applies. Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.1 |
msanSecurityAclProfileSequenceThe relative evaluation sequence of this ACL for this
interface and direction. When multiple ACLs are allowed
for a given interface and direction, the sequence number
determines the order in which the list of ACLs are evaluated,
with lower sequence numbers given higher precedence. The
sequence number value is arbitrary, but must be a unique
non-zero value for a given interface and direction.
Setting this object to an existing sequence number
value for a given interface and direction causes the
ACL corresponding to that value to be replaced with this ACL. Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.2 |
msanSecurityAclProfileAclTypeThe type of this ACL, which is used to interpret the
aclIfId object value. Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.3 |
msanSecurityAclProfileAclIdThe ACL identifier value.
For the IP ACLs, the actual ACL number is its identifier
as follows: IP standard ranges from 1-99, IP extended
ranges from 100-199, and IP advanced ranges 200-299. Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.4 |
msanSecurityAclProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.5 |
msanL2cpProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.3.7 |
msanL2cpProfileTableL2CP (Layer 2 Control Protocol) Profile table SEQUENCE OF MsanL2cpProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.7.1 |
msanL2cpProfileEntryL2cp Profile table entry. MsanL2cpProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1 |
msanL2cpProfileNameName of the L2CP profile. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.1 |
msanL2cpProfileProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanL2cpProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.2 |
msanL2cpProfileStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.3 |
msanL2cpProfileDescriptionAttribute specifies text which describes the associated object.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.4 |
msanL2cpProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.5 |
msanL2cpProtocolTableTable with list of L2CP protocols SEQUENCE OF MsanL2cpProtocolEntry .1.3.6.1.4.1.1332.1.1.5.3.3.7.2 |
msanL2cpProtocolEntryDescription. MsanL2cpProtocolEntry .1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1 |
msanL2cpProtocolNameL2CP protocol name OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.1 |
msanL2cpProtocolMacDestAddrMAC destination address of L2CP protocol.
Empty string indicates that protocol is related to any MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.2 |
msanL2cpProtocolEthertypeL2CP protocol Ethertype.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.3 |
msanL2cpProtocolSubtypeL2CP protocol subtype.
A value of -1 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.4 |
msanL2cpProtocolRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
Value active(1) will activate and value destroy(6) will remove this entry.
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.5 |
msanL2cpProfileProtocolTableTable with connection between profiles and protocols SEQUENCE OF MsanL2cpProfileProtocolEntry .1.3.6.1.4.1.1332.1.1.5.3.3.7.3 |
msanL2cpProfileProtocolEntryDescription. MsanL2cpProfileProtocolEntry .1.3.6.1.4.1.1332.1.1.5.3.3.7.3.1 |
msanL2cpProfileProtocolRuleL2CP protocol rule.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.7.3.1.1 |
msanL2cpProfileProtocolRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
Value active(1) will activate and value destroy(6) will remove this entry.
Other values are currently not supported.
Row can be activated only when msanL2cpProfileProtocolRule is set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.7.3.1.2 |
msanL2cpProfileVlanTableTable is used for connecting l2cp profile with vlan_id. SEQUENCE OF MsanL2cpProfileVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.3.7.4 |
msanL2cpProfileVlanEntryDescription. MsanL2cpProfileVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.3.7.4.1 |
msanL2cpProfileVlanRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.3.7.4.1.1 |
msanXdslProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.3.8 |
msanXdsl2LineConfTemplateTableDescription. SEQUENCE OF MsanXdsl2LineConfTemplateEntry .1.3.6.1.4.1.1332.1.1.5.3.3.8.1 |
msanXdsl2LineConfTemplateEntryDescription. MsanXdsl2LineConfTemplateEntry .1.3.6.1.4.1.1332.1.1.5.3.3.8.1.1 |
msanXdsl2LineConfTempProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanAclProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.8.1.1.1 |
msanXdsl2LineConfTempStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.8.1.1.2 |
msanXdsl2LineAlarmConfTemplateTableDescription. SEQUENCE OF MsanXdsl2LineAlarmConfTemplateEntry .1.3.6.1.4.1.1332.1.1.5.3.3.8.2 |
msanXdsl2LineAlarmConfTemplateEntryDescription. MsanXdsl2LineAlarmConfTemplateEntry .1.3.6.1.4.1.1332.1.1.5.3.3.8.2.1 |
msanXdsl2LineAlarmConfTempProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanAclProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.8.2.1.1 |
msanXdsl2LineAlarmConfTempStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.8.2.1.2 |
msanProfileConfigStatusProfile configuration status.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.3.100 |
msanDhcpRelay OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.4 |
msanDhcpRaGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.4.1 |
msanDhcpRaStatusDHCP Relay Agent status.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.1.1 |
msanDhcpRaModeSpecifies if the DHCP Relay Agent mode is to be Simple or Full. Default value is Full.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.1.2 |
msanDhcpRaCircuitTypeSpecifies DHCP RA Circuit type as trusted(1) or untrusted(2).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.1.3 |
msanDhcpRaOpt82Specifies DHCP Relay Agent general option 82 insertion status .rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.1.4 |
msanDhcpRaOpt82ReplyModeSpecifies DHCP Relay Agent keep/remove option 82 in replies.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.1.5 |
msanDhcpRaOpt82CircuitIdStatusSpecifies the disable/enable inserting Circuit ID suboption. Default value is Enable.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.1.6 |
msanDhcpRaOpt82RemoteIdStatusSpecifies the disable/enable inserting Remote ID suboption. Default value is Enable.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.1.7 |
msanDhcpRaOpt82UnicastExtStatusThe desired state of insertion of option 82 in unicast frames.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.1.8 |
msanDhcpRaFullModeSrvIpAddrThe IP address of default DHCP Server for VLANs where DHCP RA is enabled
in full mode (parameter msanDhcpRaVlanMode).rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.4.1.9 |
msanDhcpRaPortConfigTableTable od DHCP RA parameters per port. SEQUENCE OF MsanDhcpRaPortConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.2 |
msanDhcpRaPortConfigEntryDescription. MsanDhcpRaPortConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.2.1 |
msanDhcpRaPortStateState of DHCP Relay Agent on the port (enable, disable, enable-client, enable-server)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.2.1.1 |
msanDhcpRaPortCircuitIdOption 82 Circuit Id for the port.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.4.2.1.2 |
msanDhcpRaPortRemoteIdOption 82 Remote Id for the port.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.4.2.1.3 |
msanDhcpRaPortMeterEnable or disable DHCP metering on port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.2.1.4 |
msanDhcpRaPortMaxDataRateAllowed throughput of incoming DHCP traffic on a port (kb/s)rw Integer32 UNITS "kb/s" .1.3.6.1.4.1.1332.1.1.5.3.4.2.1.5 |
msanDhcpRaPortCircuitTypeSpecifies DHCP RA Circuit type per port as trusted(1) or untrusted(2).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.2.1.6 |
msanDhcpRaPortOpt82Specifies DHCP Relay Agent option 82 insertion status per port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.2.1.7 |
msanDhcpRaPortOpt82ReplyModeSpecifies DHCP Relay Agent keep/remove option 82 in replies per port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.2.1.8 |
msanDhcpRaPortOpt82UnicastExtStatusThe desired state of insertion of option 82 in unicast frames per port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.2.1.9 |
msanDhcpRaPortCircuitIdTypeCircuit Id syntax mode per port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.2.1.10 |
msanDhcpRaFullModeVlanTableDescription. SEQUENCE OF MsanDhcpRaFullModeVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.4.3 |
msanDhcpRaFullModeVlanEntryDescription. MsanDhcpRaFullModeVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.4.3.1 |
msanDhcpRaFullModeVlanIdThe VLAN identifier (refers to dot1qVlanIndex) where DHCP Client resides. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.3.1.1 |
msanDhcpRaFullModeVlanSrvIpAddrThe IP address of DHCP Server for specified VLAN. IpAddress .1.3.6.1.4.1.1332.1.1.5.3.4.3.1.2 |
msanDhcpRaFullModeVlanRowStatusThe row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.4.3.1.3 |
msanDhcpRaStatTableDescription. SEQUENCE OF MsanDhcpRaStatEntry .1.3.6.1.4.1.1332.1.1.5.3.4.5 |
msanDhcpRaStatEntryDescription. MsanDhcpRaStatEntry .1.3.6.1.4.1.1332.1.1.5.3.4.5.1 |
msanDhcpRaStatDiscoverNumber of received DHCP DISCOVER packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.1 |
msanDhcpRaStatRequestNumber of received DHCP REQUEST packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.2 |
msanDhcpRaStatOfferNumber of received DHCP OFFER packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.3 |
msanDhcpRaStatACKNumber of received DHCP ACKNOWLAGE (ACK) packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.4 |
msanDhcpRaStatNAKNumber of received DHCP NOT ACKNOWLAGE (NAK) packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.5 |
msanDhcpRaStatDeclineNumber of received DHCP DECLINE packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.6 |
msanDhcpRaStatMaxPacketSizeExceededNumber of received DHCP packets with max. packet size exceeded.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.7 |
msanDhcpRaStatFrameErrNumber of received DHCP packets with errors in frames.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.8 |
msanDhcpRaStatOpt82PresentNumber of received DHCP packets with Option 82 or giaddr present.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.9 |
msanDhcpRaStatFrameUnsyncNumber of received packets with frames not synchronized with state machines.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.10 |
msanDhcpRaStatReleaseNumber of received DHCP RELEASE packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.11 |
msanDhcpRaStatInformNumber of received DHCP INFORM packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.5.1.12 |
msanDhcpRaVlanConfigTableTable od DHCP RA parameters per Vlan. SEQUENCE OF MsanDhcpRaVlanConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.6 |
msanDhcpRaVlanConfigEntryDescription. MsanDhcpRaVlanConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.6.1 |
msanDhcpRaVlanStateDHCP RA state for specified VLAN ID. Value notConfigured(2) means, that
global setting is used(msanDhcpRaStatus).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.6.1.1 |
msanDhcpRaVlanModeDHCP RA mode for specified VLAN ID. Value notConfigured(1) means, that
global setting is used(msanDhcpRaMode).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.6.1.2 |
msanDhcpRaVlanOpt82Specifies DHCP Relay Agent option 82 insertion status per vlan.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.6.1.3 |
msanDhcpRaVlanOpt82ReplyModeSpecifies DHCP Relay Agent keep/remove option 82 in replies per vlan.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.6.1.4 |
msanDhcpRaVlanOpt82UnicastExtStatusThe desired state of insertion of option 82 in unicast frames per vlan.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.6.1.5 |
msanDhcpRaVlanCircuitIdTypeCircuit Id syntax mode per vlan.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.6.1.6 |
msanDhcpRaPortVlanConfigTableDescription. SEQUENCE OF MsanDhcpRaPortVlanConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.7 |
msanDhcpRaPortVlanConfigEntryDescription. MsanDhcpRaPortVlanConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.7.1 |
msanDhcpRaPortVlanRemoteIdThe VLAN identifier (refers to dot1qVlanIndex) where DHCP Client resides.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.4.7.1.1 |
msanDhcpRaPortVlanConfigRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.4.7.1.2 |
msanDhcpv6RaGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.4.100 |
msanDhcpv6RaStateDHCPv6 Relay Agent status.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.100.1 |
msanDhcpv6RaModeDHCPv6 Relay Agent mode.
ldra = Lightweight DHCPRv6rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.100.2 |
msanDhcpv6RaInterfaceIdStandardDHCPv6 RA Standard Interface Id type.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.100.3 |
msanDhcpv6Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.4.101 |
msanDhcpv6RaPortStatTableDescription. SEQUENCE OF MsanDhcpv6RaPortStatEntry .1.3.6.1.4.1.1332.1.1.5.3.4.101.1 |
msanDhcpv6RaPortStatEntryDescription. MsanDhcpv6RaPortStatEntry .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1 |
msanDhcpv6PortRaStatSolicitNumber of received DHCPv6 solicit packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.1 |
msanDhcpv6PortRaStatAdvertiseNumber of received DHCPv6 advertise packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.2 |
msanDhcpv6PortRaStatRequestNumber of received DHCPv6 request packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.3 |
msanDhcpv6PortRaStatReplyNumber of received DHCPv6 reply packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.4 |
msanDhcpv6PortRaStatRenewNumber of received DHCPv6 renew packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.5 |
msanDhcpv6PortRaStatRebindNumber of received DHCPv6 rebind packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.6 |
msanDhcpv6PortRaStatDeclineNumber of received DHCPv6 decline packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.7 |
msanDhcpv6PortRaStatReconfigureNumber of received DHCPv6 reconfigure packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.8 |
msanDhcpv6PortRaStatReleaseNumber of received DHCPv6 release packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.9 |
msanDhcpv6PortRaStatInformRequestNumber of received DHCPv6 inform request packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.10 |
msanDhcpv6PortRaStatRelayForwardNumber of received DHCPv6 relay forward packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.11 |
msanDhcpv6PortRaStatRelayReplyNumber of received DHCPv6 relay reply packets.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.12 |
msanDhcpv6PortRaStatOversizeErrorNumber of discarded packets because max packet size exceeded.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.100 |
msanDhcpv6PortRaStatFrameErrorNumber of discarded packets because frame error.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.101 |
msanDhcpv6PortRaStatFrameUnsyncErrorNumber of received packets with frames not synchronized with state machines.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.102 |
msanDhcpv6PortRaStatSysErrorNumber of discarded packets because system error.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.103 |
msanDhcpv6RaStatSolicitNumber of received DHCPv6 solicit packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.100 |
msanDhcpv6RaStatAdvertiseNumber of received DHCPv6 advertise packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.101 |
msanDhcpv6RaStatRequestNumber of received DHCPv6 request packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.102 |
msanDhcpv6RaStatReplyNumber of received DHCPv6 reply packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.103 |
msanDhcpv6RaStatRenewNumber of received DHCPv6 renew packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.104 |
msanDhcpv6RaStatRebindNumber of received DHCPv6 rebind packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.105 |
msanDhcpv6RaStatDeclineNumber of received DHCPv6 decline packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.106 |
msanDhcpv6RaStatReconfigureNumber of received DHCPv6 reconfigure packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.107 |
msanDhcpv6RaStatReleaseNumber of received DHCPv6 reconfigure packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.108 |
msanDhcpv6RaStatInformRequestNumber of received DHCPv6 inform request packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.109 |
msanDhcpv6RaStatRelayForwardNumber of received DHCPv6 Relay Forward packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.110 |
msanDhcpv6RaStatRelayReplyNumber of received DHCPv6 Relay Reply packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.112 |
msanDhcpv6RaStatOversizeErrorNumber of discarded packets because max packet size exceeded.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.200 |
msanDhcpv6RaStatFrameErrorNumber of discareded packets because errors in frame.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.201 |
msanDhcpv6RaStatFrameUnsyncErrorNumber of received packets with frames not synchronized with state machines.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.202 |
msanDhcpv6RaStatSysErrorNumber of discared packets because system error.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.4.101.203 |
msanDhcpv6RaPortConfigTableTable od DHCP RA parameters per port. SEQUENCE OF MsanDhcpv6RaPortConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.102 |
msanDhcpv6RaPortConfigEntryDescription. MsanDhcpv6RaPortConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.102.1 |
msanDhcpv6RaPortStateState of DHCPv6 Relay Agent on the port (enable, disable, enable-client, enable-server)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.102.1.1 |
msanDhcpv6RaPortTrustedSpecifies DHCP RA Circuit type per port as trusted(1) or untrusted(2).
Default value for user ports is untrusted(2) and for network ports trusted(1).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.102.1.2 |
msanDhcpv6RaPortInterfaceIdStandardDHCPv6 RA Circuit Id syntax mode per port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.102.1.3 |
msanDhcpv6RaPortInterfaceIdDHCPv6 Option 82 Circuit Id for the port.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.4.102.1.4 |
msanDhcpv6RaPortRemoteIdDHCPv6 Remote Id value for the port.
If empty string, remote id is not added to DHCPv6 package.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.4.102.1.5 |
msanDhcpv6RaPortRemoteIdEnterpriseNumDHCPv6 Remote Id enterprise number for the port.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.4.102.1.6 |
msanDhcpv6RaVlanConfigTableTable od DHCP RA parameters per Vlan. SEQUENCE OF MsanDhcpv6RaVlanConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.103 |
msanDhcpv6RaVlanConfigEntryDescription. MsanDhcpv6RaVlanConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.103.1 |
msanDhcpv6RaVlanStateDHCP RA state for specified VLAN ID.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.103.1.1 |
msanDhcpv6RaVlanInterfaceIdStandardDHCPv6 RA Circuit Id syntax mode per port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.4.103.1.2 |
msanDhcpv6RaPortVlanConfigTableDescription. SEQUENCE OF MsanDhcpv6RaPortVlanConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.104 |
msanDhcpv6RaPortVlanConfigEntryDescription. MsanDhcpv6RaPortVlanConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.4.104.1 |
msanDhcpv6RaPortVlanRemoteIdDHCPv6 Remote Id value for specified vlan_id per port.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.4.104.1.1 |
msanDhcpv6RaPortVlanRemoteIdEnterpriseNumDHCPv6 Remote Id enterprise number for specified vlan_id per port.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.4.104.1.2 |
msanDhcpv6RaPortVlanRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.4.104.1.3 |
msanSntp OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.5 |
msanSntpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.5.1 |
msanSntpTzOffsetSpecifies the time zone offset time in format hh:mm. Allowed range is -12 to 13.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.5.1.1 |
msanSntpTzNameTime Zone name.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.5.1.2 |
msanSntpTzDstOffsetSpecifies the daylight saving time offset time in format hh:mm. Allowed range is -12 to 13.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.5.1.3 |
msanSntpTzDstStartMonthSpecifies the daylight saving time start month.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.5.1.4 |
msanSntpTzDstStartWeekSpecifies the daylight saving time start week.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.5.1.5 |
msanSntpTzDstStartDayInWeekSpecifies the daylight saving time start day in week.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.5.1.6 |
msanSntpTzDstStartTimeSpecifies the daylight saving time start time. Allowed range is 00:00 to 23:59.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.5.1.7 |
msanSntpTzDstEndMonthSpecifies the daylight saving time end month.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.5.1.8 |
msanSntpTzDstEndWeekSpecifies the daylight saving time end week.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.5.1.9 |
msanSntpTzDstEndDayInWeekSpecifies the daylight saving time end start day in week.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.5.1.10 |
msanSntpTzDstEndTimeSpecifies the daylight saving time end time. Allowed range is 00:00 to 23:59rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.5.1.11 |
msanSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.7 |
msanSnmpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.7.1 |
msanSnmpTrapRecvUdpPortThe UDP Port where SNMP traps are to be sent.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.7.1.1 |
msanIgmpSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.8 |
msanIgmpSnoopingGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.8.1 |
msanIgmpSnoopingReportSuppressionReport suppression mode for IGMP Snooping for the switch.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.1.1 |
msanIgmpSnoopingAdminStateIGMP snooping global state.
Values enableAndUnknownGroupFlood(3) and enableAndMrouterFlood(4) are relevant only
for MSAN Ethernet switch (ES) products, where enableAndUnknownGroupFlood(3) is supported
only on IDC board.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.1.2 |
msanIgmpSnoopingLoggingVlanIdVLAN Id on which IGMP snooping logging is performed. Value 0 means that logging is disabled.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.8.1.3 |
msanIgmpSnoopingViolationActionRemoving one of the existing (the oldest) multicast group membership, or
discarding a new group membership request.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.1.4 |
msanIgmpSnoopingFastLeaveAdminModeThis enables or disables IGMP Snooping Fast-Leave on user ports.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.1.5 |
msanIgmpSnoopingGroupMembershipIntervalThe amount of time in seconds that a switch will wait for a report
from a particular group on the selected interface before deleting the
interface from the entry.
This value must be greater than msanIgmpSnoopingMaxResponseTimerw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.8.1.6 |
msanIgmpSnoopingMaxResponseTimeThe amount of time in seconds a switch will wait on a report after sending
a query on the selected interface.
This value must be less than msanIgmpSnoopingGroupMembershipIntervalrw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.8.1.7 |
msanIgmpVersionVersion of processed IGMP frames.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.1.8 |
msanIgmpClearClear all IGMP snooping entries.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.1.9 |
msanIgmpSnoopingTableDescription. SEQUENCE OF MsanIgmpSnoopingEntry .1.3.6.1.4.1.1332.1.1.5.3.8.2 |
msanIgmpSnoopingEntryDescription. MsanIgmpSnoopingEntry .1.3.6.1.4.1.1332.1.1.5.3.8.2.1 |
msanIgmpSnoopingIntfStandaloneQuerierSpecify the period of time in seconds you want the IGMP Standalone Querier generate IGMP query packets. Value must be higher than
msanIgmpSnoopingMaxResponseTime and lower than msanIgmpSnoopingGroupMembershipInterval or 0.
The default is 0. A value of zero indicates that standalone querier is disabled.
IGMP SA Querier can be activated only on one interface at the same time.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.1332.1.1.5.3.8.2.1.1 |
msanIgmpSnoopingIntfFilterFiltering of IGMP join/leave reports or queries frames.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.2.1.2 |
msanIgmpSnoopingGroupLimitA maximum numbers of IGMP groups per interface.
Value 0 means no limits.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.8.2.1.3 |
msanSwitchIGMPVlanCurrentMrouterTableDescription. SEQUENCE OF MsanSwitchIGMPVlanCurrentMrouterEntry .1.3.6.1.4.1.1332.1.1.5.3.8.3 |
msanSwitchIGMPVlanCurrentMrouterEntryDescription. MsanSwitchIGMPVlanCurrentMrouterEntry .1.3.6.1.4.1.1332.1.1.5.3.8.3.1 |
msanSwitchIGMPVlanCurrentMrouterEnableStateReturns per-interface per-vlan pairs where IGMP Mrouter is enabled.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.8.3.1.1 |
msanSwitchIGMPSnoopingStaticIntfMulticastRouterTableDescription. SEQUENCE OF MsanSwitchIGMPSnoopingStaticIntfMulticastRouterEntry .1.3.6.1.4.1.1332.1.1.5.3.8.4 |
msanSwitchIGMPSnoopingStaticIntfMulticastRouterEntryDescription. MsanSwitchIGMPSnoopingStaticIntfMulticastRouterEntry .1.3.6.1.4.1.1332.1.1.5.3.8.4.1 |
msanSwitchIGMPSnoopingIntfIndexThe port number to be selected. Each port maps to an interface.ro Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.8.4.1.1 |
msanSwitchIGMPSnoopingIntfAdminModeThis enables or disables IGMP Snooping on a selected interface.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.4.1.2 |
msanSwitchIGMPSnoopingIntfGroupMembershipIntervalThe amount of time in seconds that a switch will wait for a report
from a particular group on the selected interface before deleting the
interface from the entry. This value must be greater than
agentSwitchIGMPSnoopingIntfMaxResponseTime.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.8.4.1.3 |
msanSwitchIGMPSnoopingIntfMaxResponseTimeThe amount of time in seconds a switch will wait after sending
a query on the selected interface because it did not receive a report for
a particular group in that interface. This value must be less
than agentSwitchIGMPSnoopingIntfGroupMembershipInterval.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.8.4.1.4 |
msanSwitchIGMPSnoopingIntfMRPExpirationTimeThe amount of time in seconds that a switch will wait for a query to be
received on the selected interface before the interface is removed from
the list of interfaces with multicast routers attached.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.8.4.1.5 |
msanSwitchIGMPSnoopingIntfFastLeaveAdminModeThis enables or disables IGMP Snooping Fast-Leave on specified interface.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.4.1.6 |
msanSwitchIGMPSnoopingStaticIntfMulticastRouterModeMode of static IGMP Mrouter on selected interface.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.4.1.7 |
msanSwitchIGMPSnoopingIntfVlanIDsThis field lists all the VlanIDs which include the selected interface.rodeprecated VlanList .1.3.6.1.4.1.1332.1.1.5.3.8.4.1.8 |
msanSwitchIGMPVlanStaticMrouterTableDescription.deprecated SEQUENCE OF MsanSwitchIGMPVlanStaticMrouterEntry .1.3.6.1.4.1.1332.1.1.5.3.8.5 |
msanSwitchIGMPVlanStaticMrouterEntryDescription.deprecated MsanSwitchIGMPVlanStaticMrouterEntry .1.3.6.1.4.1.1332.1.1.5.3.8.5.1 |
msanSwitchIGMPVlanStaticMrouterEnableStateObject used to create a new row or modify or destroy an existing row in manner described in the definition of the RowStatus textual.
Supported states are Active(1), CreateAndGo(4) and Destroy(6).
Row is created with CreateAndGo(4). This enables IGMP Mrouter on a per-interface per-vlan basis and
the row goes to Active(1). The row is removed with Destroy(6) and IGMP Mrouter on this interface/VLAN pair is disabled.
Values NotInService(2), NotReady(3) and CreateAndWait(5) are not supported.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.8.5.1.1 |
msanSwitchIGMPSnoopingVlanTableA table of the IGMP Snooping Vlan configuration entries. SEQUENCE OF MsanSwitchIGMPSnoopingVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.8.6 |
msanSwitchIGMPSnoopingVlanEntryRepresents entry for a IGMP Snooping Vlan. MsanSwitchIGMPSnoopingVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.8.6.1 |
msanSwitchIGMPSnoopingVlanAdminModeThis enables or disables IGMP Snooping on a selected Vlan interface.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.6.1.1 |
msanSwitchIGMPSnoopingVlanGroupMembershipIntervalThe amount of time in seconds that a switch will wait for a report
from a particular group on the selected vlan before deleting the
interface participating in the vlan from the entry. This value must
be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.8.6.1.2 |
msanSwitchIGMPSnoopingVlanMaxResponseTimeThe amount of time in seconds a switch will wait after sending
a query on the selected vlan because it did not receive a report for
a particular group in the interface participating in the vlan.
This value must be less than
agentSwitchIGMPSnoopingIntfGroupMembershipInterval.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.8.6.1.3 |
msanSwitchIGMPSnoopingVlanFastLeaveAdminModeThis enables or disables IGMP Snooping on the selected vlan.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.6.1.4 |
msanSwitchIGMPSnoopingVlanMRPExpirationTimeThe amount of time in seconds that a switch will wait for a query to be
received on the selected interface participating in the vlan before the
interface is removed from the list of interfaces with multicast routers
attached. This parameter is configurable only for exisiting Vlans.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.8.6.1.5 |
msanSwitchIGMPSnoopingVlanAdminStateIGMP Snooping state on a selected Vlan interface.
This parameter is ignored if global msanIgmpSnoopingAdminState value
is disableAndDiscard(0) or disableAndBroadcast(1).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.8.6.1.6 |
msanSwitchIGMPProxyVlanTableA table of the IGMP Proxy Vlan configuration entries. SEQUENCE OF MsanSwitchIGMPProxyVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.8.7 |
msanSwitchIGMPProxyVlanEntry MsanSwitchIGMPProxyVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.8.7.1 |
msanSwitchIGMPProxyVlanIpAddrIGMP Proxy IP address. If set to 0.0.0.0, default IP address is
used (IP address of MN interface -> msanNetworkIPAddress). IpAddress .1.3.6.1.4.1.1332.1.1.5.3.8.7.1.1 |
msanSwitchIGMPProxyVlanRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.8.7.1.2 |
msanIgmpStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.8.8 |
msanIgmpStatGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.8.8.1 |
msanIgmpStatRxV1Number of received IGMP v1 packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.1.1 |
msanIgmpStatRxV2JoinNumber of received IGMP v2 join packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.1.2 |
msanIgmpStatRxV2LeaveNumber of received IGMP v2 leave packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.1.3 |
msanIgmpStatRxV3ReportNumber of received IGMP v3 report packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.1.4 |
msanIgmpStatRxQueryNumber of received IGMP query packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.1.5 |
msanIgmpStatRxErrorNumber of received corrupted or unknown IGMP packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.1.6 |
msanIgmpStatRxBlockByIgmpFilterNumber of received IGMP packets blocked by IGMP filter.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.1.7 |
msanIgmpStatRxBlockByMcastAclNumber of received IGMP packets blocked by Multicast ACL.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.1.8 |
msanIgmpStatRxBlockByMcastCacNumber of received IGMP packets blocked by Multicast CAC.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.1.9 |
msanIgmpStatRxBlockByIgmpVersionNumber of received IGMP packets blocked by IGMP Version Control.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.1.10 |
msanIgmpPortStatTableDescription. SEQUENCE OF MsanIgmpPortStatEntry .1.3.6.1.4.1.1332.1.1.5.3.8.8.2 |
msanIgmpPortStatEntryDescription. MsanIgmpPortStatEntry .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1 |
msanIgmpPortStatRxV1Number of received IGMP v1 packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.1 |
msanIgmpPortStatTxV1Number of transmitted IGMP v1 packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.2 |
msanIgmpPortStatRxV2JoinNumber of received IGMP v2 join packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.3 |
msanIgmpPortStatTxV2JoinNumber of transmitted IGMP v2 join packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.4 |
msanIgmpPortStatRxV2LeaveNumber of received IGMP v2 leave packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.5 |
msanIgmpPortStatTxV2LeaveNumber of transmitted IGMP v2 leave packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.6 |
msanIgmpPortStatRxV3ReportNumber of received IGMP v3 report packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.7 |
msanIgmpPortStatTxV3ReportNumber of transmitted IGMP v3 report packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.8 |
msanIgmpPortStatRxQueryNumber of received IGMP query packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.9 |
msanIgmpPortStatRxErrorNumber of received corrupted or unknown IGMP packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.10 |
msanIgmpPortStatRxBlockByIgmpFilterNumber of received IGMP packets blocked by IGMP filter.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.11 |
msanIgmpPortStatRxBlockByMcastAclNumber of received IGMP packets blocked by Multicast ACL.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.12 |
msanIgmpPortStatRxBlockByMcastCacNumber of received IGMP packets blocked by Multicast CAC.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.13 |
msanIgmpPortStatTxQueryNumber of transmitted IGMP query packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.14 |
msanIgmpPortStatRxBlockByIgmpVersionNumber of received IGMP packets blocked by IGMP Version.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.8.8.2.1.15 |
msanPort OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.10 |
msanPortGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.10.1 |
msanPortTableDescription. SEQUENCE OF MsanPortEntry .1.3.6.1.4.1.1332.1.1.5.3.10.2 |
msanPortEntryDescription. MsanPortEntry .1.3.6.1.4.1.1332.1.1.5.3.10.2.1 |
msanPortMNFlagThis object determines whether to allow or not allow management access to a specific link. The factory default is enabled.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.10.2.1.1 |
msanPortMasterSlaveThis object determines whether Gb port should be master or slave. Set to none when
auto-negotiation and for non-Gb ports.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.10.2.1.6 |
msanPortNegCapAdvertisedBitsA value that uniquely identifies the set of capabilities advertised by
the local auto-negotiation entity.
Note that the local auto-negotiation entity may advertise some capabilities
beyond the scope of this MIB. This is indicated by returning the bit value
bOther in addition to any bit values for capabilities that are listed above.
Only b1000baseXFD(13) and b1000baseTFD(15) are currently supported.rw Bits .1.3.6.1.4.1.1332.1.1.5.3.10.2.1.7 |
msanPortSpeedDuplexSpeed and duplex mode of the interface.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.10.2.1.8 |
msanPortStpP2PAutoStateThe field extends ISKRATEL-MSAN-BASICCONF-MIB.agentStpCstPortOperPointToPoint by the <auto> value.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.10.2.1.20 |
msanPortUsageTypeThis object specifies the type of an interface whether it is an uplink or downlink.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.10.2.1.21 |
msanPppoeIA OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.11 |
msanPppoeIAGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.11.1 |
msanPppoeIAStatusSpecifies if the PPPOE Intermadiate Agent Service is to be Enabled or Disabled.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.11.1.1 |
msanPppoeIAVsaReplyModeSpecifies PPPOE Intermadiate Agent keep/remove option 82 in replies.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.11.1.2 |
msanPppoeIACircuitIdStatusSpecifies the disable/enable inserting Circuit ID suboption.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.11.1.3 |
msanPppoeIARemoteIdStatusSpecifies the disable/enable inserting Remote ID suboption.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.11.1.4 |
msanPppoeIAPortTableDescription. SEQUENCE OF MsanPppoeIAPortEntry .1.3.6.1.4.1.1332.1.1.5.3.11.2 |
msanPppoeIAPortEntryDescription. MsanPppoeIAPortEntry .1.3.6.1.4.1.1332.1.1.5.3.11.2.1 |
msanPppoeIAPortStatusState of PPPoE Intermadiate Agent on the portrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.11.2.1.1 |
msanPppoeIAPortRemoteIdRemote Id for the port.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.11.2.1.2 |
msanPppoeIAPortCircuitTypePPPoE IA Circuit type per port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.11.2.1.3 |
msanPppoeIaStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.11.3 |
msanPppoeIaStatPADINumber of PADI packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.1 |
msanPppoeIaStatPADRNumber of PADR packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.2 |
msanPppoeIaStatPADONumber of PADO packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.3 |
msanPppoeIaStatPADSNumber of PADS packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.4 |
msanPppoeIaStatPADTNumber of PADT packets.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.5 |
msanPppoeIaStatUnsutableFramesNumber of packets with unsutable frame.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.6 |
msanPppoeIaStatUnknownFramesNumber of packets with unknown frame.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.7 |
msanPppoeIaStatInvalidFramesNumber of packets with invalid frame.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.8 |
msanPppoeIaPortStatisticsTableDescription. SEQUENCE OF MsanPppoeIaPortStatisticsEntry .1.3.6.1.4.1.1332.1.1.5.3.11.3.9 |
msanPppoeIaPortStatisticsEntryDescription. MsanPppoeIaPortStatisticsEntry .1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1 |
msanPppoeIaPortStatPADINumber of PADI packets on the port.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.1 |
msanPppoeIaPortStatPADRNumber of PADR packets on the port.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.2 |
msanPppoeIaPortStatPADONumber of PADO packets on the port.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.3 |
msanPppoeIaPortStatPADSNumber of PADS packets on the port.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.4 |
msanPppoeIaPortStatPADTNumber of PADT packets on the port.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.5 |
msanPppoeIaPortStatUnsutableFramesNumber of packets with unsutable frame on the port.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.6 |
msanPppoeIaPortStatUnknownFramesNumber of packets with unknown frame on the port.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.7 |
msanPppoeIaPortStatInvalidFramesNumber of packets with invalid frame on the port.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.11.3.9.1.8 |
msanPppoeIaVlanTableDescription. SEQUENCE OF MsanPppoeIaVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.11.4 |
msanPppoeIaVlanEntryDescription. MsanPppoeIaVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.11.4.1 |
msanPppoeIaVlanStatusState of PPPoE Intermadiate Agent per VLAN.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.11.4.1.1 |
msanQoS OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.12 |
msanQosGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.12.1 |
msanIpAclRuleTableThis table extends aclTable/aclRuleTable. SEQUENCE OF MsanIpAclRuleEntry .1.3.6.1.4.1.1332.1.1.5.3.12.2 |
msanIpAclRuleEntryThis table extends aclTable/aclRuleTable. MsanIpAclRuleEntry .1.3.6.1.4.1.1332.1.1.5.3.12.2.1 |
msanIpAclIndexThis is aclIndex in aclTable Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.1 |
msanIpAclRuleIndexThe index of the IP ACL rule (aclRuleIndex in aclRuleTable). Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.2 |
msanIpAclRuleAssignVlanIdAssign VLAN Id.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.3 |
msanIpAclRuleAssignCoSPriorityAssign CoS priorityrwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.4 |
msanIpAclRuleEgressIntfEgress interface ID (ifIndex/ifTable).rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.5 |
msanIpAclRuleAssignVlanId2Assign Secondary VLAN ID -> add (if not exists) or change.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.6 |
msanIpAclRuleRemoveVlanIdRemove VLAN Id (outer).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.7 |
msanIpAclRuleIcmpTypeICMP message type used in the MAC ACL Classification.
This parameter is used if aclRuleProtocol is set to icmp(1).rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.8 |
msanIpAclRuleDestMacAddrThe Destination MAC address used in the Advanced IP ACL Classification.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.9 |
msanIpAclRuleDestMacMaskThe Destination MAC address mask used in the Advanced IP Classification.
This mask value identifies the portion of the msanIpAclRuleDestMacAddr
that is compared against a packet. A non-contiguous mask value is
permitted.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.10 |
msanIpAclRuleSrcMacAddrThe Source MAC address used in the Advanced IP ACL Classification.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.11 |
msanIpAclRuleSrcMacMaskThe Source MAC address mask used in the Advanced IP Classification.
This mask value identifies the portion of the msanIpAclRuleSrcMacAddr
that is compared against a packet. A non-contiguous mask value is
permitted.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.12 |
msanIpAclRuleCosThe Class of Service (COS) used in the Advanced IP Classification.
This is the three-bit user priority field in the 802.1Q tag
header of a tagged Ethernet frame. For frames containing a
double VLAN tag, this field is located in the first/outer tag.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.13 |
msanIpAclRuleCos2The Secondary Class of Service (COS) used in the Advanced IP Classification.
This is the three-bit user priority field in the second 802.1Q tag
header of a tagged Ethernet frame.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.14 |
msanIpAclRuleVlanIdThe VLAN ID value used in the Advanced IP Classification.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.15 |
msanIpAclRuleVlanId2The Secondary VLAN ID value used in the Advanced IP Classification.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the second 802.1Q tag header of a tagged Ethernet frame.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.16 |
msanIpAclRuleCVlanIdThe C-customer VLAN ID value used in the Advanced IP Classification.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the second 802.1Q tag header of a tagged Ethernet frame.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.17 |
msanIpAclRuleSVlanIdThe S-service VLAN ID value used in the Advanced IP Classification.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.18 |
msanIpAclRuleAssignCVlanIdAssign C VLAN ID -> add (if not exists) or change.
Used in the Advanced IP Classification.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.19 |
msanIpAclRuleAssignSVlanIdAssign S VLAN ID -> add (if not exists) or change.
Used in the Advanced IP Classification.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.20 |
msanIpAclRuleRemoveSVlanIdRemove S-service VLAN ID.
Used in the Advanced IP Classification.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.21 |
msanIpAclRuleVlanIdRangeStartThe VLAN ID range start value used in the Advanced IP Classification.
Setting this value greater than the current msanIpAclRuleVlanIdRangeEnd
changes the VLAN ID range end to the same value as the range start.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.22 |
msanIpAclRuleVlanIdRangeEndThe VLAN ID range end value used in the Advanced IP Classification.
Setting this value less than the current msanIpAclRuleVlanIdRangeStart
changes the VLAN ID range start to the same value as the range end.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.23 |
msanIpAclRuleVlanId2RangeStartThe Secondary VLAN ID range start value used in the Advanced IP Classification.
Setting this value greater than the current msanIpAclRuleVlanId2RangeEnd
changes the VLAN ID range end to the same value as the range start.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the second 802.1Q tag header of a tagged Ethernet frame.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.24 |
msanIpAclRuleVlanId2RangeEndThe Secondary VLAN ID range end value used in the Advanced IP Classification.
Setting this value less than the current msanIpAclRuleVlanId2RangeStart
changes the VLAN ID range start to the same value as the range end.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the second 802.1Q tag header of a tagged Ethernet frame.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.25 |
msanIpAclRuleSVlanIdRangeStartThe S-service VLAN ID range start value used in the Advanced IP Classification.
Setting this value greater than the current msanIpAclRuleSVlanIdRangeEnd
changes the VLAN ID range end to the same value as the range start.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.26 |
msanIpAclRuleSVlanIdRangeEndThe S-service VLAN ID range end value used in the Advanced IP Classification.
Setting this value less than the current msanIpAclRuleSVlanIdRangeStart
changes the VLAN ID range start to the same value as the range end.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.27 |
msanIpAclRuleCVlanIdRangeStartThe C-customer VLAN ID range start value used in the Advanced IP Classification.
Setting this value greater than the current msanIpAclRuleCVlanIdRangeEnd
changes the VLAN ID range end to the same value as the range start.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.28 |
msanIpAclRuleCVlanIdRangeEndThe C-customer VLAN ID range end value used in the Advanced IP Classification.
Setting this value less than the current msanIpAclRuleCVlanIdRangeStart
changes the VLAN ID range start to the same value as the range end.
Advanced IP ACL: msanIpAclIndex value in range 200 ... 299rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.29 |
msanIpAclRuleSrcIpv6AddressThe Source IPv6 Address used in the ACL Classification.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.31 |
msanIpAclRuleSrcIpv6AddressMaskLenThe length of the prefix (in bits) associated with the
IPv6 source address of this entry (msanIpAclRuleSrcIpv6Address).
Value 0 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.32 |
msanIpAclRuleDestIpv6AddressThe Destination IPv6 Address used in the ACL Classification.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.33 |
msanIpAclRuleDestIpv6AddressMaskLenThe length of the prefix (in bits) associated with the
IPv6 destination address of this entry (msanIpAclRuleDestIpv6Address).
Value 0 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.2.1.34 |
msanMacAclRuleTableThis table extends aclMacTable/aclMacRuleTable. SEQUENCE OF MsanMacAclRuleEntry .1.3.6.1.4.1.1332.1.1.5.3.12.3 |
msanMacAclRuleEntryThis table extends aclMacTable/aclMacRuleTable. MsanMacAclRuleEntry .1.3.6.1.4.1.1332.1.1.5.3.12.3.1 |
msanMacAclIndexThis is aclMacIndex in aclMacTable Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.1 |
msanMacAclRuleIndexThe index of the MAC ACL rule (aclMACRuleIndex in aclMACRuleTable). Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.2 |
msanMacAclRuleEgressIntfEgress Interface ID (ifIndex/ifTable).rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.3 |
msanMacAclRuleAssignVlanIdAssign VLAN Id.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.4 |
msanMacAclRuleAssignCoSPriorityAssign CoS priorityrwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.5 |
msanMacAclRuleAssignVlanId2Assign Secondary VLAN ID -> add (if not exists) or change.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.6 |
msanMacAclRuleRemoveVlanIdRemove outer VLAN Id (outer).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.7 |
msanMacAclRuleCVlanIdC-customer Vlan IDrw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.8 |
msanMacAclRuleSVlanIdS-service Vlan IDrw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.9 |
msanMacAclRuleAssignCVlanIdAssign C-customer VLAN ID -> add (if not exists) or change.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.10 |
msanMacAclRuleAssignSVlanIdAssign S-service VLAN ID -> add (if not exists) or change.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.11 |
msanMacAclRuleRemoveSVlanIdRemove S-service VLAN ID.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.12 |
msanMacAclRuleSVlanIdRangeStartThe S-service VLAN ID range start value.
Setting this value greater than the current msanMacAclRuleSVlanIdRangeEnd
changes the VLAN ID range end to the same value as the range start.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.13 |
msanMacAclRuleSVlanIdRangeEndThe S-service VLAN ID range end value.
Setting this value less than the current msanMacAclRuleSVlanIdRangeStart
changes the VLAN ID range start to the same value as the range end.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.14 |
msanMacAclRuleCVlanIdRangeStartThe C-customer VLAN ID range start value.
Setting this value greater than the current msanMacAclRuleCVlanIdRangeEnd
changes the VLAN ID range end to the same value as the range start.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.15 |
msanMacAclRuleCVlanIdRangeEndThe C-customer VLAN ID range end value.
Setting this value less than the current msanMacAclRuleCVlanIdRangeStart
changes the VLAN ID range start to the same value as the range end.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.3.1.16 |
msanCosQueueControlTableDescription. SEQUENCE OF MsanCosQueueControlEntry .1.3.6.1.4.1.1332.1.1.5.3.12.4 |
msanCosQueueControlEntryDescription. MsanCosQueueControlEntry .1.3.6.1.4.1.1332.1.1.5.3.12.4.1 |
msanCosQueueControlIntfBurstSizeSpecifies the maximum number of uncommitted bytes that the switch will try to send into the network. It is the number of bytes that are sent at a rate,
higher than committed and that the next device in the network must be able to buffer without notifying a congestion. Default value is 0.
Valid values are 16, 20, 28, 40, 76, 140, 268 and 524 kilobytes. Configuring shaping rate without burst size will take the maximum possible value of burst, which is 524 KB.rw Integer32 UNITS "kilobyte" .1.3.6.1.4.1.1332.1.1.5.3.12.4.1.1 |
msanCosQueueIntfShapingRateSpecifies the maximum bandwidth allowed, typically used to shape
the outbound transmission rate. This value is controlled independently
of any per-queue maximum bandwidth configuration. It is effectively a
second-level shaping mechanism.
Default value is 0. Valid Range is 0 to 10000000 kbps. The value 0 means
maximum is unlimited.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.12.4.1.2 |
msanCosQueueTableTable of class-of-service queue configuration
parameters for the specified interface.
This is extension of the table agentCosQueueTable. SEQUENCE OF MsanCosQueueEntry .1.3.6.1.4.1.1332.1.1.5.3.12.5 |
msanCosQueueEntryEach entry describes a single class-of-service (COS)
queue for a given Interface Index. The number of
configurable COS queues for an interface vary based
on device capabilities.
All objects defined for this table entry contain a
default value corresponding to a typical,
non-preferential treatment of packets traversing the
interface's COS queues. MsanCosQueueEntry .1.3.6.1.4.1.1332.1.1.5.3.12.5.1 |
msanCosQueueIndexThe COS queue index, numbered 0 to (n-1), where n is
the total number of configurable interface queues for
the device as indicated by agentCosQueueNumQueuesPerPort.
In general, a higher numbered queue index is used to
support higher priority traffic, although actual
operation may be altered via configuration through
this table. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.5.1.1 |
msanCosQueueWeightWeight of the queue being used in egress scheduling algorithm.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.12.5.1.2 |
msanCosQueueLengthLength of the queue in kB.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.12.5.1.3 |
msanCosMapIntfTrustTableDescription. SEQUENCE OF MsanCosMapIntfTrustEntry .1.3.6.1.4.1.1332.1.1.5.3.12.6 |
msanCosMapIntfTrustEntryDescription. MsanCosMapIntfTrustEntry .1.3.6.1.4.1.1332.1.1.5.3.12.6.1 |
msanCosMapIntfTrustModeThis is copy of LVL7 parameter agentCosMapIntfTrustMode,
except that index 0 is not supported.
The class of service trust mode of an interface.
When set to a trusted mode, the appropriate COS
mapping table is used as follows:
trustDot1p(2) : dot1dTrafficClassTable
trustIpPrecedence(3): agentCosMapIpPrecTable
trustIpDscp(4): agentCosMapIpDscpTable
For an untrusted(1) interface, packets are handled in
accordance with the dot1dPortDefaultUserPriority value
of the ingress port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.6.1.1 |
msanQosProfileTableDescription. SEQUENCE OF MsanQosProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.12.7 |
msanQosProfileEntryDescription. MsanQosProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.12.7.1 |
msanQosProfileNameQoS profile name. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.1 |
msanQosProfileMatchInAnyMatch every incoming packet frame.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.2 |
msanQosProfileMatchInMacDestAddrMatch incoming packet frame with specified destination MAC address.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.3 |
msanQosProfileMatchInMacDestMaskThis mask value identifies the portion of msanQosProfileMatchInMacDestAddr that
is compared with input packet.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.4 |
msanQosProfileMatchInMacSrcAddrMatch incoming packet frame with specified source MAC address.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.5 |
msanQosProfileMatchInMacSrcMaskThis mask value identifies the portion of msanQosProfileMatchInMacSrcAddr that
is compared with input packet.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.6 |
msanQosProfileMatchInCosMatch incoming packet frame with specified CoS value (0-7).
A value of -1 indicates that parameter has not been definedrw Integer32 (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.7 |
msanQosProfileMatchInCos2Match incoming packet frame with specified secondary (C-TAG) CoS value (0-7).
A value of -1 indicates that parameter has not been definedrw Integer32 (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.8 |
msanQosProfileMatchInVlanIdMatch incoming packet frame with specified VLAN ID value (1-4094).
A value of -1 indicates that parameter has not been definedrw Integer32 (-1..4094) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.9 |
msanQosProfileMatchInVlanId2Match incoming packet frame with specified secondary (C-TAG) VLAN ID value (1-4094).
A value of -1 indicates that parameter has not been definedrw Integer32 (-1..4094) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.10 |
msanQosProfileMatchInEthertypeMatch incoming packet frame with specified EtherType value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.11 |
msanQosProfileMatchInIpProtocolMatch incoming packet frame with specified IP protocol value.
A value of -1 indicates that parameter has not been defined.
Some of standard protocol values:
icmp - 1
igmp - 2
ip - 4 (ip in ip encapsulation)
tcp - 6
udp - 17rw Integer32 (-1..255) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.12 |
msanQosProfileMatchInIpSrcAddrMatch incoming packet frame with specified source IP address.
Empty string indicates that parameter has not been defined.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.13 |
msanQosProfileMatchInIpSrcMaskThis mask value identifies the portion of msanQosProfileMatchInIpSrcAddr that
is compared with input packet.
Empty string indicates that parameter has not been definedrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.14 |
msanQosProfileMatchInIpDestAddrMatch incoming packet frame with specified destination IP address.
Empty string indicates that parameter has not been defined.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.15 |
msanQosProfileMatchInIpDestMaskThis mask value identifies the portion of msanQosProfileMatchInIpDestAddr that
is compared with input packet.
Empty string indicates that parameter has not been definedrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.16 |
msanQosProfileMatchInIpDscpMatch incoming packet frame with specified IP DSCP value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..63) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.17 |
msanQosProfileMatchInIpPrecedenceMatch incoming packet frame with specified IP precedence (part of TOS field) value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.18 |
msanQosProfileMatchInIpTosBitsMatch incoming packet frame with specified IP TOS bits value.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.19 |
msanQosProfileMatchInIpTosMaskThis mask value identifies the portion of msanQosProfileMatchInIpTosBits that
is compared against a packet.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.20 |
msanQosProfileMatchInL4SrcPortMatch incoming packet frame with specified source TCP/UDP port number.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.21 |
msanQosProfileMatchInL4DestPortMatch incoming packet frame with specified destination TCP/UDP port number in downstream direction.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.22 |
msanQosProfileMatchOutAnyMatch every outgoing packet frame in upstream direction.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.23 |
msanQosProfileMatchOutMacDestAddrMatch outgoing packet frame with specified destination MAC address.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.24 |
msanQosProfileMatchOutMacDestMaskThis mask value identifies the portion of msanQosProfileMatchOutMacDestAddr that
is compared with output packet.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.25 |
msanQosProfileMatchOutMacSrcAddrMatch outgoing packet frame with specified source MAC address.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.26 |
msanQosProfileMatchOutMacSrcMaskThis mask value identifies the portion of msanQosProfileMatchOutMacSrcAddr that
is compared with output packet.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.27 |
msanQosProfileMatchOutCosMatch outgoing packet frame with specified CoS value (0-7).
A value of -1 indicates that parameter has not been definedrw Integer32 (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.28 |
msanQosProfileMatchOutCos2Match outgoing packet frame with specified secondary (C-TAG) CoS value (0-7).
A value of -1 indicates that parameter has not been definedrw Integer32 (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.29 |
msanQosProfileMatchOutVlanIdMatch outgoing packet frame with specified VLAN ID value (1-4094).
A value of -1 indicates that parameter has not been definedrw Integer32 (-1..4094) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.30 |
msanQosProfileMatchOutVlanId2Match outgoing packet frame with specified secondary (C-TAG) VLAN ID value (1-4094).
A value of -1 indicates that parameter has not been definedrw Integer32 (-1..4094) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.31 |
msanQosProfileMatchOutEthertypeMatch outgoing packet frame with specified EtherType value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.32 |
msanQosProfileMatchOutIpProtocolMatch outgoing packet frame with specified IP protocol value in upstream direction.
A value of -1 indicates that parameter has not been defined.
Some of standard protocol values:
icmp - 1
igmp - 2
ip - 4 (ip in ip encapsulation)
tcp - 6
udp - 17rw Integer32 (-1..255) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.33 |
msanQosProfileMatchOutIpSrcAddrMatch outgoing packet frame with specified source IP address.
Empty string indicates that parameter has not been defined.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.34 |
msanQosProfileMatchOutIpSrcMaskThis mask value identifies the portion of msanQosProfileMatchOutIpSrcAddr that
is compared with output packet.
Empty string indicates that parameter has not been definedrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.35 |
msanQosProfileMatchOutIpDestAddrMatch outgoing packet frame with specified destination IP address.
Empty string indicates that parameter has not been defined.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.36 |
msanQosProfileMatchOutIpDestMaskThis mask value identifies the portion of msanQosProfileMatchOutIpDestAddr that
is compared with output packet.
Empty string indicates that parameter has not been definedrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.37 |
msanQosProfileMatchOutIpDscpMatch outgoing packet frame with specified IP DSCP value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..63) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.38 |
msanQosProfileMatchOutIpPrecedenceMatch outgoing packet frame with specified IP precedence (part of TOS field) value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.39 |
msanQosProfileMatchOutIpTosBitsMatch outgoing packet frame with specified IP TOS bits value.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.40 |
msanQosProfileMatchOutIpTosMaskThis mask value identifies the portion of msanQosProfileMatchOutIpTosBits that
is compared with output packet.
Empty string indicates that parameter has not been definedrw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.41 |
msanQosProfileMatchOutL4SrcPortMatch outgoing packet frame with specified source TCP/UDP port number in upstream direction.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.42 |
msanQosProfileMatchOutL4DestPortMatch outgoing packet frame with specified destination TCP/UDP port number.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.43 |
msanQosProfileInCdrIncoming committed data rate (E-CDR) in kbps (0 1000000).
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..1000000) UNITS "kbps" .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.44 |
msanQosProfileInPdrIncoming peak data rate (E-PDR) in kbps (0 1000000).
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..1000000) UNITS "kbps" .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.45 |
msanQosProfileOutCdrOutgoing committed data rate (E-CDR) in kbps (0 1000000).
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..1000000) UNITS "kbps" .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.46 |
msanQosProfileOutPdrOutgoing peak data rate (E-PDR) in kbps (0 1000000).
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..1000000) UNITS "kbps" .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.47 |
msanQosProfileInTrustModeTrust mode for incoming packets which correspond to this profile.
Default value is untrusted(1).
Value untrustMarkCos(4) can be set if parameter msanQosProfileInMarkCos value
is grater than -1.
Value untrustMarkCos(5) can be set if parameter msanQosProfileInMarkDscp value
is grater than -1.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.48 |
msanQosProfileInMarkCosMark incoming packets with specified CoS value (0-7).
A value of -1 indicates that parameter has not been definedrw INTEGER (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.49 |
msanQosProfileInMarkDscpMark incoming packets with specified IP DSCP value.
A value of -1 indicates that parameter has not been defined.rw INTEGER (-1..63) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.50 |
msanQosProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
Value active(1) will activate and value destroy(6) will remove this entry.
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.51 |
msanQosProfilePriorityPriority of QoS profile.
On interface can be linked only one QoS profile
with high(2) prority (msanQoSIntProfileTable)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.52 |
msanQosProfileInCdrBurstSizeIncoming committed data rate burst size in kB (0 16384).
When parameter is set to 0 (default), it's automatically updated to default
burst size in according with current msanQoSProfileInCdr value.rw Integer32 UNITS "kB" .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.53 |
msanQosProfileInPdrBurstSizeIncoming peak data rate burst size in kB (0 16384).
When parameter is set to 0 (default), it's automatically updated to default
burst size in according with current msanQoSProfileInPdr value.rw Integer32 UNITS "kB" .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.54 |
msanQosProfileOutCdrBurstSizeOutgoing committed data rate burst size in kB (0 16384).
When parameter is set to 0 (default), it's automatically updated to default
burst size in according with current msanQoSProfileOutCdr value.rw Integer32 UNITS "kB" .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.55 |
msanQosProfileOutPdrBurstSizeOutgoing peak data rate burst size in kB (0 16384).
When parameter is set to 0 (default), it's automatically updated to default
burst size in according with current msanQoSProfileOutCdr value.rw Integer32 UNITS "kB" .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.56 |
msanQosProfileMatchInSrcIpv6AddressMatch incoming packet frame with specified source IPv6 address.
Empty string indicates that parameter has not been defined.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.58 |
msanQosProfileMatchInSrcIpv6AddressMaskLenThe length of the prefix (in bits) associated with the
incoming IPv6 source address of this entry (msanQosProfileMatchInSrcIpv6Address).
Value 0 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.59 |
msanQosProfileMatchInDestIpv6AddressMatch incoming packet frame with specified destination IPv6 address.
Empty string indicates that parameter has not been defined.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.60 |
msanQosProfileMatchInDestIpv6AddressMaskLenThe length of the prefix (in bits) associated with the
incoming IPv6 destination address of this entry (msanQosProfileMatchInDestIpv6Address).
Value 0 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.61 |
msanQosProfileMatchOutSrcIpv6AddressMatch outgoing packet frame with specified source IPv6 address.
Empty string indicates that parameter has not been defined.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.63 |
msanQosProfileMatchOutSrcIpv6AddressMaskLenThe length of the prefix (in bits) associated with the
outcoming IPv6 source address of this entry (msanQosProfileMatchOutSrcIpv6Address).
Value 0 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.64 |
msanQosProfileMatchOutDestIpv6AddressMatch outcoming packet frame with specified destination IPv6 address.
Empty string indicates that parameter has not been defined.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.65 |
msanQosProfileMatchOutDestIpv6AddressMaskLenThe length of the prefix (in bits) associated with the
outcoming IPv6 destination address of this entry (msanQosProfileMatchOutDestIpv6Address).
Value 0 indicates that parameter has not been defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.7.1.66 |
msanQosIntfProfileTableThis table connects selected QoS profiles (msanQoSProfileName) to specified interfaces (ifIndex). SEQUENCE OF MsanQosIntfProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.12.8 |
msanQosIntfProfileEntryDescription. MsanQosIntfProfileEntry .1.3.6.1.4.1.1332.1.1.5.3.12.8.1 |
msanQosIntfProfileAtmVpiATM Virtual path identifier of the ADSL interface.
Value -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.12.8.1.1 |
msanQosIntfProfileAtmVciATM Virtual channel identifier of the ADSL interface.
Value -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.12.8.1.2 |
msanQosIntfProfileRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
For row activation use active(1).
For row deactivation use notInService(2).
For row deletion use destroy(6).
Other values are currently not supported.
On interface can be linked only one QoS profile with high(2) prority (msanQosProfilePriority)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.12.8.1.3 |
msanQosStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.12.9 |
msanQosPortStatTableDescription. SEQUENCE OF MsanQosPortStatEntry .1.3.6.1.4.1.1332.1.1.5.3.12.9.1 |
msanQosPortStatEntryDescription. MsanQosPortStatEntry .1.3.6.1.4.1.1332.1.1.5.3.12.9.1.1 |
msanQosPortStatInDroppedFramesNumber of dropped frames per port in incoming direction.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.12.9.1.1.1 |
msanQosPortStatOutDroppedFramesNumber of dropped frames per port in outgoing direction.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.12.9.1.1.2 |
msanQosPortProfileStatTableDescription. SEQUENCE OF MsanQosPortProfileStatEntry .1.3.6.1.4.1.1332.1.1.5.3.12.9.2 |
msanQosPortProfileStatEntryDescription. MsanQosPortProfileStatEntry .1.3.6.1.4.1.1332.1.1.5.3.12.9.2.1 |
msanQosPortProfileStatQueueCurrentCurrent queue occupation per profile per port (in number of packets) .ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.9.2.1.1 |
msanQosPortProfileStatQueueAverageAverage queue occupation per profile per port (in number of packets) .ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.9.2.1.2 |
msanQosPortProfileStatQueueMaxMaximum queue occupation per profile per port (in number of packets) .ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.9.2.1.3 |
msanIpAclTableDescription. SEQUENCE OF MsanIpAclEntry .1.3.6.1.4.1.1332.1.1.5.3.12.10 |
msanIpAclEntryDescription. MsanIpAclEntry .1.3.6.1.4.1.1332.1.1.5.3.12.10.1 |
msanIpAclIdThis is aclIndex in aclTable (1.3.6.1.4.1.1332.1.1.5.2.3.2.1) Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.10.1.1 |
msanIpAclProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanAclProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.10.1.2 |
msanIpAclStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.10.1.4 |
msanMacAclTableDescription. SEQUENCE OF MsanMacAclEntry .1.3.6.1.4.1.1332.1.1.5.3.12.11 |
msanMacAclEntryDescription. MsanMacAclEntry .1.3.6.1.4.1.1332.1.1.5.3.12.11.1 |
msanMacAclIdThis is aclMacIndex in aclMacTable (1.3.6.1.4.1.1332.1.1.5.2.3.2.6) Integer32 .1.3.6.1.4.1.1332.1.1.5.3.12.11.1.1 |
msanMacAclProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanMacAclStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.11.1.3 |
msanMacAclStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.12.11.1.4 |
msanForwardingDb OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.13 |
msanForwardingDbGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.13.3 |
msanAddressLearningModeSpecifies how source MAC addresses are associated with the interfaces on the switch. If mode is specified as nomaconly,
source MAC addresses are learned as pairs of incoming VLAN ID and the source MAC address. If mode is specified as maconly,
all source MAC addresses are learned in a specified VLAN, VLAN ID of the VLAN the packet was received from is not remembered.
This mode is used for General Purpose Service Based Tagging.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.13.3.1 |
msanAddressLearningVlanIdThis is the VLAN ID which is used for learning source MAC addresses in maconly mode. All learned MAC addresses
will be marked as received from this VLAN. VLAN with this VLAN ID is created on the switch and all physical intefaces
are added to this VLAN. This VLAN ID cannot be used for configuring other VLANs on the switch.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.13.3.2 |
msanSwitchAddressAgingTimeoutThe FDB entry's address aging timeout (in seconds).rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.13.3.3 |
msanDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.14 |
msanDiagnosticsGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.14.1 |
msanDiagnosticsFanSpeedLevelMSAN shelf fan current speed level. Higher level defines higer speed.
Level 0 means fan is stopped. Maximum level is defined by
parameter msanDiagnosticsMaxFanSpeedLevelro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.1.1 |
msanDiagnosticsMaxFanSpeedLevelMSAN shelf fan max speed level.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.1.2 |
msanDiagnosticsTestTableDescription. SEQUENCE OF MsanDiagnosticsTestEntry .1.3.6.1.4.1.1332.1.1.5.3.14.2 |
msanDiagnosticsTestEntryDescription. MsanDiagnosticsTestEntry .1.3.6.1.4.1.1332.1.1.5.3.14.2.1 |
msanDiagnosticsTestCodeUnique identification of a test program. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.2.1.1 |
msanDiagnosticsTestNameThe name of a test program.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.14.2.1.2 |
msanDiagnosticsTestActivitySpecifies the Test activity parameter for the diagnostic.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.14.2.1.3 |
msanDiagnosticsTestTimeTest time, whose interpretation depends on test running mode:
- for cyclical tests, it means the period at which the test is
carried out one after another (time unit is milisecond)
- for all others, it means time of day in the form 'hhmmss'
(e.g. '224950') at which the test begins.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.14.2.1.4 |
msanDiagnosticsTestPriorityTest priority parameter for the diagnostic.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.14.2.1.6 |
msanDiagnosticsTestTypeType of starting the test.
DECIMAL VALUE DESCRIPTION
1 At start-up & Recovery
2 Periodical
3 Dailyro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.14.2.1.7 |
msanDiagnosticsTestTimeMinMinimum possible value of parameter msanDiagnosticTestTime.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.2.1.8 |
msanDiagnosticsTestTimeMaxMaximum possible value of parameter msanDiagnosticTestTime.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.2.1.9 |
msanDiagnosticsErrorTableDescription. SEQUENCE OF MsanDiagnosticsErrorEntry .1.3.6.1.4.1.1332.1.1.5.3.14.3 |
msanDiagnosticsErrorEntryDescription. MsanDiagnosticsErrorEntry .1.3.6.1.4.1.1332.1.1.5.3.14.3.1 |
msanDiagnosticsErrorCodeUnique identification of an error reported during testing an object. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.3.1.1 |
msanDiagnosticsErrorDescriptionDescription of the error code.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.14.3.1.2 |
msanDiagnosticsErrorPriorityError priority.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.14.3.1.3 |
msanDiagnosticsErrorObjectTypeObject type - List of values can be found in alr_def.hro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.14.3.1.4 |
msanDiagnosticsErrorMeasureMeasure (what is done when an error occurs, for instance reset the node, ...) - List of values can be found in alr_def.hro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.14.3.1.5 |
msanDiagnosticsErrorMeasureActiveActivity of measure. With setting this parameter to notActive(0), you can prevent excecution of measure.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.14.3.1.6 |
msanDiagnosticsErrorProbableCauseProbable cause.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.3.1.7 |
msanDiagnosticsErrorObjectTypeIdObject type ID- List of values can be found in alr_def.hro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.3.1.8 |
msanDiagnosticsErrorMeasureIdMeasure (what is done when an error occurs, for instance reset the node, ...) - List of values can be found in alr_def.hro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.3.1.9 |
msanDiagnosticsTempTableDescription. SEQUENCE OF MsanDiagnosticsTempEntry .1.3.6.1.4.1.1332.1.1.5.3.14.4 |
msanDiagnosticsTempEntryDescription. MsanDiagnosticsTempEntry .1.3.6.1.4.1.1332.1.1.5.3.14.4.1 |
msanDiagnosticsTempSensorIDTemperature sensor ID. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.4.1.1 |
msanDiagnosticsTempSensorNameTemperature sensor name.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.14.4.1.2 |
msanDiagnosticsTempCurrentCurrent temperature of the specified sensor in [deg C].ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.4.1.3 |
msanDiagnosticsTempCriticUnderheatThresholdSensor critical underheat threshold temperature limit in [deg C].ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.4.1.4 |
msanDiagnosticsTempUnderheatThresholdSensor underheat temperature threshold limit in [deg C].ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.4.1.5 |
msanDiagnosticsTempOverheatThresholdSensor overheat threshold temperature limit in [deg C].ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.4.1.6 |
msanDiagnosticsTempCriticOverheatThresholdSensor critical overheat threshold temperature limit in [deg C].ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.4.1.7 |
msanDiagnosticsErrorFilterTableDescription. SEQUENCE OF MsanDiagnosticsErrorFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.14.5 |
msanDiagnosticsErrorFilterEntryDescription. MsanDiagnosticsErrorFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.14.5.1 |
msanDiagnosticsErrorFilterErrMaskError code in ascii format. Regular expression describing one or more error codes. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.14.5.1.1 |
msanDiagnosticsErrorFilterObjMaskType of object, which alarming is filtered for. Regular expression describing one or more test objects. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.14.5.1.2 |
msanDiagnosticsErrorFilterRowStatusThe row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.14.5.1.3 |
msanDiagnosticsErrorSeverityTableDescription. SEQUENCE OF MsanDiagnosticsErrorSeverityEntry .1.3.6.1.4.1.1332.1.1.5.3.14.6 |
msanDiagnosticsErrorSeverityEntryDescription. MsanDiagnosticsErrorSeverityEntry .1.3.6.1.4.1.1332.1.1.5.3.14.6.1 |
msanDiagnosticsErrorSeverityErrCodeUnique identification of an error reported during testing an object.
All error codes are stated in alr_def.h (KFMT) Integer32 .1.3.6.1.4.1.1332.1.1.5.3.14.6.1.1 |
msanDiagnosticsErrorSeverityErrPriorityPriority of error.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.14.6.1.2 |
msanDiagnosticsErrorSeverityObjMaskType of object, which alarming is filtered for. Regular expression describing one or more test objects. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.14.6.1.3 |
msanDiagnosticsErrorSeverityRowStatusThe row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5) [createAndGo(4) is not supported].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.14.6.1.4 |
msanPpp OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.15 |
msanPppGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.15.1 |
msanPppLocalIpAddressLocal IP address for PPP connectionrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.15.1.1 |
msanPppRemoteIpAddressRemote IP address for PPP connectionrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.15.1.2 |
msanPppAuthProtocolPPP authentication protocol. For MPS connection use CHAP.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.15.1.3 |
msanPppEchoIntervalLCP echo interval (in seconds) for session breakdown identification.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.1332.1.1.5.3.15.1.4 |
msanPppVanJacobsonCompressionControl of VanJacobson compression. For MPS connection it must be disabled.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.15.1.5 |
msanPppAdminStateGlobal PPP connection administrative state.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.15.1.6 |
msanAlarmPanel OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.16 |
msanAlarmPanelGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.16.1 |
msanAlarmPanelAudioAlarmPriorityAlarm Panel Audio Alarm Priority.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.16.1.1 |
msanAlarmPanelSerialPortTypeType of equipment connected to serial port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.16.1.2 |
msanAlarmPanelTableDescription. SEQUENCE OF MsanAlarmPanelEntry .1.3.6.1.4.1.1332.1.1.5.3.16.2 |
msanAlarmPanelEntryDescription. MsanAlarmPanelEntry .1.3.6.1.4.1.1332.1.1.5.3.16.2.1 |
msanAlarmPanelIndexUnique identification of an alarm panel. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.16.2.1.1 |
msanAlarmPanelConnectionStateAlarm panel connection statusro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.16.2.1.2 |
msanAlarmPanelAdminStateFlag determining whether an alarm panel is equipped or not.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.16.2.1.3 |
msanAlarmPanelIndicatorTableDescription. SEQUENCE OF MsanAlarmPanelIndicatorEntry .1.3.6.1.4.1.1332.1.1.5.3.16.3 |
msanAlarmPanelIndicatorEntryDescription. MsanAlarmPanelIndicatorEntry .1.3.6.1.4.1.1332.1.1.5.3.16.3.1 |
msanAlarmPanelIndicatorIndexAlarm panel indicator number. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.16.3.1.1 |
msanAlarmPanelIndicatorErrCodeAlarm panel indicator error number.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.16.3.1.2 |
msanAlarmPanelInputTableDescription. SEQUENCE OF MsanAlarmPanelInputEntry .1.3.6.1.4.1.1332.1.1.5.3.16.4 |
msanAlarmPanelInputEntryDescription. MsanAlarmPanelInputEntry .1.3.6.1.4.1.1332.1.1.5.3.16.4.1 |
msanAlarmPanelInputIndexAlarm panel input sensor number. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.16.4.1.1 |
msanAlarmPanelInputErrCodeAlarm panel input sensor error code.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.16.4.1.2 |
msanAlarmPanelInputActiveLevelAlarm panel input sensor active level.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.16.4.1.3 |
msanMvr OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.17 |
msanMvrGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.17.1 |
msanMvrPortTableDescription. SEQUENCE OF MsanMvrPortEntry .1.3.6.1.4.1.1332.1.1.5.3.17.2 |
msanMvrPortEntryDescription. MsanMvrPortEntry .1.3.6.1.4.1.1332.1.1.5.3.17.2.1 |
msanMvrPortAdminModeAdministrative mode for Multicast VLAN Registration (a.k.a. Service Based Tagging) for the selected interfacerw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.17.2.1.1 |
msanMvrMulticastGroupTableDescription. SEQUENCE OF MsanMvrMulticastGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.17.3 |
msanMvrMulticastGroupEntryDescription. MsanMvrMulticastGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.17.3.1 |
msanMvrMulticastGroupMVlanIdVLAN ID (refers to dot1qVlanIndex) where MVR functionality is used. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.17.3.1.1 |
msanMvrMulticastGroupStartIpStart IP Address of the multicast group range. IpAddress .1.3.6.1.4.1.1332.1.1.5.3.17.3.1.2 |
msanMvrMulticastGroupEndIpEnd IP Address of the multicast group range.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.17.3.1.3 |
msanMvrMulticastGroupRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.17.3.1.4 |
msanMvrConfigTableDescription. SEQUENCE OF MsanMvrConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.17.4 |
msanMvrConfigEntryDescription. MsanMvrConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.17.4.1 |
msanMvrConfigCVlanIdCustomer VLAN ID for the selected interface from which
IGMP Join/Leave messages will be remarked. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.17.4.1.1 |
msanMvrConfigMVlanIdService provider multicast VLAN ID for the selected interface
to which IGMP Join/Leave messages will be remarked. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.17.4.1.2 |
msanMvrConfigCosOutput CoS priority on the selected interface. IGMP messages received from
this interface will have this priority when they are transmitted into service provider
multicast VLAN.
Value '-1' defines that original CoS value is not changed.rw Integer32 (-1..7) .1.3.6.1.4.1.1332.1.1.5.3.17.4.1.3 |
msanMvrConfigRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.17.4.1.4 |
msanMvrDvlanTableDescription. SEQUENCE OF MsanMvrDvlanEntry .1.3.6.1.4.1.1332.1.1.5.3.17.5 |
msanMvrDvlanEntryDescription. MsanMvrDvlanEntry .1.3.6.1.4.1.1332.1.1.5.3.17.5.1 |
msanMvrDvlanRmOuterTagStatusThe desired state of removing outer tags on IGMP packets funcionality.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.17.5.1.1 |
msanMvrDvlanEthertypeRewriteStatusThe desired state of rewriting ether type from outer vlan tag to inner vlan
tag.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.17.5.1.2 |
msanRemoteAccess OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.18 |
msanRemoteAccessGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.18.1 |
msanRemoteAccessFilterTableDescription.deprecated SEQUENCE OF MsanRemoteAccessFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.18.2 |
msanRemoteAccessFilterEntryDescription.deprecated MsanRemoteAccessFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.18.2.1 |
msanRemoteAccessFilterRuleIndexRule's index. Index should be continued, without gaps.deprecated INTEGER .1.3.6.1.4.1.1332.1.1.5.3.18.2.1.1 |
msanRemoteAccessFilterIpIP Address of the rule.rwdeprecated IpAddress .1.3.6.1.4.1.1332.1.1.5.3.18.2.1.2 |
msanRemoteAccessFilterNetmaskNetmask of the rule.rwdeprecated IpAddress .1.3.6.1.4.1.1332.1.1.5.3.18.2.1.3 |
msanRemoteAccessFilterActionAction to be taken with a packet: accept or deny it.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.18.2.1.4 |
msanRemoteAccessFilterRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.18.2.1.5 |
msanDslSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.19 |
msanDslSpecificGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.19.1 |
msanDslSpecificSystemStateVDSL system operational state. For normal blade operation this value should be operational (4).
If value differ from 4, VDSL driver is not operational.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.1.1 |
msanDslSpecificSystemFirmwareVDSL firmware version.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.1.2 |
msanDslSpecificTableDescription. SEQUENCE OF MsanDslSpecificEntry .1.3.6.1.4.1.1332.1.1.5.3.19.3 |
msanDslSpecificEntryDescription. MsanDslSpecificEntry .1.3.6.1.4.1.1332.1.1.5.3.19.3.1 |
msanDslSpecificDsPsdMaskUnique name of the downstream PSD mask as defined by msanDslPsdMaskDsName.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.1 |
msanDslSpecificUsPsdMaskUnique name of the upstream PSD mask as defined by msanDslPsdMaskUsName.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.2 |
msanDslSpecificLineStateVDSL system operational state. For normal blade operation this value should be active(3).
If value is differ from 3, VDSL driver is not operational.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.3 |
msanDslSpecificMaxDelayDsMaximum interleave delay for the downstream interleaved channel.
-1 means that value from profile will be used (xdsl2ChConfProfMaxDelayDs).
This object is created based on xdsl2ChConfProfMaxDelayDs (VDSL2-LINE MIB)rw Integer32 (-1..63) UNITS "milliseconds" .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.4 |
msanDslSpecificMaxDelayUsMaximum interleave delay for the upstream interleaved channel.
-1 means that value from profile will be used (xdsl2ChConfProfMaxDelayUs).
This object is created based on xdsl2ChConfProfMaxDelayUs (VDSL2-LINE MIB)rw Integer32 (-1..63) UNITS "milliseconds" .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.5 |
msanDslSpecificMinProtectionDsDownstream impulse noise protection.
-1 means that value from profile will be used (xdsl2ChConfProfMinProtectionDs)
This object is created based on xdsl2ChConfProfMinProtectionDs(VDSL2-LINE MIB)rw Integer32 (-1..160) UNITS "symbols" .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.6 |
msanDslSpecificMinProtectionUsUpstream impulse noise protection.
-1 means that value from profile will be used (xdsl2ChConfProfMinProtectionUs)
This object is created based on xdsl2ChConfProfMinProtectionUs(VDSL2-LINE MIB)rw Integer32 (-1..160) .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.7 |
msanDslSpecificMaxSnrmDsDownstream maximum Signal/Noise Margin.
This object is created based on xdsl2LConfProfMaxSnrmDs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.8 |
msanDslSpecificMinSnrmDsDownstream minimum Signal/Noise Margin.
This object is created based on xdsl2LConfProfMinSnrmDs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.9 |
msanDslSpecificMaxSnrmUsUpstream maximum Signal/Noise Margin.
This object is created based on xdsl2LConfProfMaxSnrmUs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.10 |
msanDslSpecificMinSnrmUsUpstream minimum Signal/Noise Margin.
This object is created based on xdsl2LConfProfMinSnrmUs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.11 |
msanDslSpecificRaUsNrmDsThe Downstream Up-Shift Noise Margin (for dynamic rate adaptive
mode).
This object is created based on xdsl2LConfProfRaUsNrmDs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.12 |
msanDslSpecificRaUsNrmUsThe Upstream Up-Shift Noise Margin (for dynamic rate adaptive mode).
This object is created based on xdsl2LConfProfRaUsNrmUs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.13 |
msanDslSpecificRaUsTimeDsThe Downstream Up-Shift Time Interval (for rate dynamic adaptive
mode).
This object is created based on xdsl2LConfProfRaUsTimeDs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.14 |
msanDslSpecificRaUsTimeUsThe Upstream Up-Shift Time Interval (for rate dynamic adaptive
mode).
This object is created based on xdsl2LConfProfRaUsTimeUs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.15 |
msanDslSpecificRaDsNrmDsThe Downstream Down-Shift Noise Margin (for dynamic rate adaptive
mode).
This object is created based on xdsl2LConfProfRaDsNrmDs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.16 |
msanDslSpecificRaDsNrmUsThe Upstream Down-Shift Noise Margin (for dynamic rate adaptive mode).
This object is created based on xdsl2LConfProfRaDsNrmUs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.17 |
msanDslSpecificRaDsTimeDsThe Downstream Down-Shift Time Interval (for rate dynamic adaptive
mode).
This object is created based on xdsl2LConfProfRaDsTimeDs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.18 |
msanDslSpecificRaDsTimeUsThe Upstream Down-Shift Time Interval (for rate dynamic adaptive
mode).
This object is created based on xdsl2LConfProfRaDsTimeUs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.19 |
msanDslSpecificL0TimeThe minimum time between an exit from the L2 state and the next entry
into the L2 state.
This object is created based on xdsl2LConfProfL0Time (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.20 |
msanDslSpecificL2TimeThe minimum time between an entry into the L2 state and the first
power trim in the L2 state and between two consecutive power trims in
the L2 State.
This object is created based on xdsl2LConfProfL2Time (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.21 |
msanDslSpecificL2AtprThe maximum aggregate transmit power reduction that can be performed
at transition of L0 to L2 state or through a single power trim in the
L2 state.
This object is created based on xdsl2LConfProfL2Atpr (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.22 |
msanDslSpecificL2AtprtThe total maximum aggregate transmit power reduction that can be
performed in an L2 state.
This object is created based on xdsl2LConfProfL2Atprt (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.23 |
msanDslSpecificScMaskDsDownstream Sub-carriers mask. A bitmap of 4096 bits that allows
masking up to 4096 downstream sub-carriers.
If bit is set to '1', the respective downstream sub-carrier is
masked (not used), and if set to '0', the respective sub-carrier is
unmasked.
This object is created based on xdsl2LConfProfScMaskDs (VDSL2-LINE MIB)rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.24 |
msanDslSpecificScMaskUsUpstream Sub-carriers mask. A bitmap of 4096 bits that allows
masking up to 4096 downstream sub-carriers.
If bit is set to '1', the respective downstream sub-carrier is
masked (not used), and if set to '0', the respective sub-carrier is
unmasked.
This object is created based on xdsl2LConfProfScMaskUs (VDSL2-LINE MIB)rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.25 |
msanDslSpecificRfiBandsFor VDLS, this configuration parameter defines the bands where the
PSD shall be reduced. Each band shall be represented by a start and
stop subcarrier indices with a subcarrier spacing of 4.3125 kHz. Up to
16 bands may be specified. This parameter defines the RFI bands for
both upstream and downstream directions. Each RFI band is
represented by 4 octets: 16 bit start sub-carrier index followed by a
16 bit stop sub-carrier index.
This object is created based on xdsl2LConfProfRfiBands (VDSL2-LINE MIB)rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.26 |
msanDslSpecificMaxNomPsdDsThe maximum nominal transmit PSD in the downstream direction during
initialization and Showtime. (0.1 dBm/Hz - physical values are -60 to
-30 dBm/Hz).
This object is created based on xdsl2LConfProfMaxNomPsdDs (VDSL2-LINE MIB)rw Integer32 (-600..-300) UNITS "0.1 dBm/Hz" .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.27 |
msanDslSpecificMaxNomPsdUsThe maximum nominal transmit PSD in the upstream direction during
initialization and Showtime. (0.1 dBm/Hz - physical values are -60 to
-30 dBm/Hz).
This object is created based on xdsl2LConfProfMaxNomPsdUs (VDSL2-LINE MIB)rw Integer32 (-600..-300) UNITS "0.1 dBm/Hz" .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.28 |
msanDslSpecificMaxNomAtpDsThe maximum nominal aggregate transmit power in the downstream
direction during initialization and Showtime. (0.1 dBm - physical
values are 0 to 25.5 dBm).
This object is created based on xdsl2LConfProfMaxNomAtpDs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.29 |
msanDslSpecificMaxNomAtpUsThe maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. (0.1 dBm - physical
values are 0 to 25.5 dBm).
This object is created based on xdsl2LConfProfMaxNomAtpUs (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.30 |
msanDslSpecificMaxAggRxPwrUsThe maximum upstream aggregate receive power over the relevant set of
sub-carriers.. (0.1 dBm - physical values are -25.5 to 25.5 dBm).
This object is created based on xdsl2LConfProfMaxAggRxPwrUs (VDSL2-LINE MIB)rw Integer32 (-255..255) UNITS "0.1 dBm" .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.31 |
msanDslSpecificClassMaskPredefined PSD mask.
This object is created based on xdsl2LConfProfClassMask (VDSL2-LINE MIB)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.32 |
msanDslSpecificDpboEsELAssumed electrical length of cables (E-side cables) connecting
exchange based DSL services to a remote flexibility point (cabinet).
The electrical length is defined as the loss (in dB) of an equivalent
length of hypothetical cable at a reference frequency. 0 dB (coded as
0) to 255.5 dB (coded as 511) in steps of 0.5 dB.
This object is created based on xdsl2LConfProfDpboEsEL (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.35 |
msanDslSpecificUpboKLFDefines the upstream power backoff force mode.
The three possible mode values are:
auto(1),
override(2),
disableUpbo(3).
This object is created based on xdsl2LConfProfUpboKLF (VDSL2-LINE MIB)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.36 |
msanDslSpecificUpboKLThis configuration parameter defines the electrical length expressed
in dB at 1MHz, configured by the CO-MIB. The value ranges from 0
(coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB.
This object is created based on xdsl2LConfProfUpboKL (VDSL2-LINE MIB)rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.37 |
msanDslSpecificSeltDefines whether the line should be forced into the SELT (Single-Ended Loop Testing)
diagnostics mode by the near-end xTU of this line.
Upon completion of the loop diagnostic mode procedures, the Access Node shall set
this object to 'inhibit'.
The results of the SELT procedure are stored in the table msanDslSeltStatusTable.
The status of the loop diagnostic procedure is indicated by msanDslSpecificSeltStatus.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.39 |
msanDslSpecificSeltStatusSELT (Single-Ended Loop Testing) status of dsl line.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.40 |
msanDslSpecificPhyRDsPhysical Layer Retransmission configuration in the downstream direction.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.41 |
msanDslSpecificPhyRUsPhysical Layer Retransmission configuration in the upstream direction.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.42 |
msanDslSpecificUpboUs1aITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)
Parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band.
A UPBO PSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as
4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0)
to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be
equal to '-a-b(SQRT(f))'. Setting xdsl2LConfProfUpboPsdA to 4000 and
xdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in
the respective upstream band.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.43 |
msanDslSpecificUpboUs1bITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)
Parameter defines the 'b' reference parameter of the UPBO
reference PSD used to compute the upstream power back-off for the
upstream band. Parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from
0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.44 |
msanDslSpecificUpboUs2aITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)
Parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band.
A UPBO PSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as
4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0)
to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be
equal to '-a-b(SQRT(f))'. Setting xdsl2LConfProfUpboPsdA to 4000 and
xdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in
the respective upstream band.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.45 |
msanDslSpecificUpboUs2bITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)
Parameter defines the 'b' reference parameter of the UPBO
reference PSD used to compute the upstream power back-off for the
upstream band. Parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from
0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.46 |
msanDslSpecificUpboUs3aITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)
Parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band.
A UPBO PSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as
4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0)
to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be
equal to '-a-b(SQRT(f))'. Setting xdsl2LConfProfUpboPsdA to 4000 and
xdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in
the respective upstream band.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.47 |
msanDslSpecificUpboUs3bITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)
Parameter defines the 'b' reference parameter of the UPBO
reference PSD used to compute the upstream power back-off for the
upstream band. Parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from
0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.48 |
msanDslSpecificUpboUs4aITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)
Parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band.
A UPBO PSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as
4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0)
to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be
equal to '-a-b(SQRT(f))'. Setting xdsl2LConfProfUpboPsdA to 4000 and
xdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in
the respective upstream band.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.49 |
msanDslSpecificUpboUs4bITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)
Parameter defines the 'b' reference parameter of the UPBO
reference PSD used to compute the upstream power back-off for the
upstream band. Parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from
0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.50 |
msanDslSpecificDpboEPsdMaskDPbo EPsd mask name.
It should be of the downstream PSD mask as defined by msanDslPsdMaskDsName.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.51 |
msanDslSpecificDpboEsCmAITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMA)
The E-side Cable Model parameter A (DPBOESCMA) of the cable model
(DPBOESCM) for cables connecting exchange-based DSL services to a remote
flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped
downstream power back- off (DPBO) depending on this value.
Possible values shall be coded as unsigned integers representing a scalar value
from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2-8 All values in the range are
valid.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.52 |
msanDslSpecificDpboEsCmBITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMB)
The E-side Cable Model parameter B (DPBOESCMB) of the cable model
(DPBOESCM) for cables connecting exchange-based DSL services to a remote
flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped
downstream power back- off (DPBO) depending on this value.
Possible values shall be coded as unsigned integers representing a scalar value
from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2-8 All values in the range are
valid.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.53 |
msanDslSpecificDpboEsCmCITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMC)
The E-side Cable Model parameter C (DPBOESCMC) of the cable model
(DPBOESCM) for cables connecting exchange-based DSL services to a remote
flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped
downstream power back- off (DPBO) depending on this value.
Possible values shall be coded as unsigned integers representing a scalar value
from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2-8 All values in the range are
valid.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.54 |
msanDslSpecificDpboMusITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOMUS)
Assumed Minimum Usable receive PSD mask (in dBm/Hz) for exchange-based
services.
It shall be coded as an unsigned integer representing a PSD mask level from
0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz.
All values in the range are valid.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.55 |
msanDslSpecificDpboFMinITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMIN)
Minimum frequency from which the DPBO shall be applied.
It ranges from 0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps of 4.3125 kHz.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.56 |
msanDslSpecificDpboFMaxITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMAX)
Maximum frequency at which DPBO may be applied.
It ranges from 138 kHz (coded as 32) to 29997.75 kHz (coded as 6956) in steps of 4.3125 kHz.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.19.3.1.57 |
msanDslPsdMaskDsTableManagement of Downstream PSD Mask (G997.1 #7.3.1.2.9 ) SEQUENCE OF MsanDslPsdMaskDsEntry .1.3.6.1.4.1.1332.1.1.5.3.19.4 |
msanDslPsdMaskDsEntryDescription. MsanDslPsdMaskDsEntry .1.3.6.1.4.1.1332.1.1.5.3.19.4.1 |
msanDslPsdMaskDsNameDownstream custom PSD mask name. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.4.1.1 |
msanDslPsdMaskDsTypeDownstream custom PSD mask type.
Possible values:
default(1) - Default mask prepared by vendor, user is not allowed to delete or change it
configured(2) - Mask created by userro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.4.1.2 |
msanDslPsdMaskDsShapeThe downstream PSD mask applicable at the U-C2 reference point.
This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.
This is a string of 32 pairs of values in the following
structure:
Octets 0-1 - Index of the first subcarrier used in the context of
a first breakpoint.
Octet 2 - The PSD reduction for the subcarrier indicated in
octets 0 and 1.
Octets 3-5 - Same, for a second breakpoint.
Octets 6-8 - Same, for a third breakpoint.
This architecture continues until octets 94-95, which are
associated with a 32nd breakpoint.
Each subcarrier index is an unsigned number in the range 0 and
NSCds-1. Each PSD reduction value is in the range 0 (0 dBm/Hz) to
255 (-127.5 dBm/Hz) with steps of 0.5 dBm/Hz. Valid values are in
the range 0 to 190 (0 to -95 dBm/Hz).
When the number of breakpoints is less than 32, all remaining
octets are set to the value '0'. Note that the content of this
object should be correlated with the subcarrier mask and with
the RFI setup.rw Xdsl2PsdMaskDs .1.3.6.1.4.1.1332.1.1.5.3.19.4.1.3 |
msanDslPsdMaskDsRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.19.4.1.4 |
msanDslPsdMaskUsTableManagement of Upstream PSD Mask (G997.1 #7.3.1.2.9 ) SEQUENCE OF MsanDslPsdMaskUsEntry .1.3.6.1.4.1.1332.1.1.5.3.19.5 |
msanDslPsdMaskUsEntryDescription. MsanDslPsdMaskUsEntry .1.3.6.1.4.1.1332.1.1.5.3.19.5.1 |
msanDslPsdMaskUsNameUpstream custom PSD mask name. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.5.1.1 |
msanDslPsdMaskUsTypeDownstream custom PSD mask type.
Possible values:
default(1) - Default mask prepared by vendor, user is not allowed to delete or change it
configured(2) - Mask created by userro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.5.1.2 |
msanDslPsdMaskUsShapeThe upstream PSD mask applicable at the U-R2 reference point.
This parameter is used only for G.992.5, and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.
This is a string of 16 pairs of values in the following
structure:
Octets 0-1 - Index of the first subcarrier used in the context of
a first breakpoint.
Octet 2 - The PSD reduction for the subcarrier indicated in
octets 0 and 1.
Octets 3-5 - Same, for a second breakpoint.
Octets 6-8 - Same, for a third breakpoint.
This architecture continues until octets 9-47, which are
associated with a 16th breakpoint.
Each subcarrier index is an unsigned number in the range 0 and
NSCus-1. Each PSD reduction value is in the range 0 (0 dBm/Hz) to
255 (-127.5 dBm/Hz) with steps of 0.5 dBm/Hz. Valid values are in
the range 0 to 190 (0 to -95 dBm/Hz).
When the number of breakpoints is less than 16, all remaining
octets are set to the value '0'. Note that the content of this
object should be correlated with the subcarrier mask and with
the RFI setup.rw Xdsl2PsdMaskUs .1.3.6.1.4.1.1332.1.1.5.3.19.5.1.3 |
msanDslPsdMaskUsRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.19.5.1.4 |
msanDslSeltStatusTableDescription. SEQUENCE OF MsanDslSeltStatusEntry .1.3.6.1.4.1.1332.1.1.5.3.19.6 |
msanDslSeltStatusEntryDescription. MsanDslSeltStatusEntry .1.3.6.1.4.1.1332.1.1.5.3.19.6.1 |
msanDslSeltStatusNoiseTypeNoise type.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.1 |
msanDslSeltStatusNoiseMrgDsNoise margin in DS direction. [0.1 dB]ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.2 |
msanDslSeltStatusNoiseMrgUsNoise margin in US direction. [0.1 dB]ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.3 |
msanDslSeltStatusNumTonesDsNumber of tones used for SELT in DS direction.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.4 |
msanDslSeltStatusNumTonesUsNumber of tones used for SELT in US direction.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.5 |
msanDslSeltStatusMaxRateDsMaximum Downstream capacity [kbps]ro Integer32 UNITS "kbps" .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.6 |
msanDslSeltStatusMaxRateUsMaximum Upstream capacity [kbps]ro Integer32 UNITS "kbps" .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.7 |
msanDslSeltStatusCableTypeDSL line loop type.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.8 |
msanDslSeltStatusCableLenghtDSL line loop lenght. [m]ro Integer32 UNITS "m" .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.9 |
msanDslSeltStatusFitErrorDSL Line lenght fit error. [%]ro Integer32 UNITS "%" .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.10 |
msanDslSeltStatusLoopTerminationType of DSL line termination.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.19.6.1.11 |
msanPortMirroring OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.20 |
msanPortMirroringGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.20.1 |
msanPortMirroringTableDescription. SEQUENCE OF MsanPortMirroringEntry .1.3.6.1.4.1.1332.1.1.5.3.20.2 |
msanPortMirroringEntryDescription. MsanPortMirroringEntry .1.3.6.1.4.1.1332.1.1.5.3.20.2.1 |
msanPortMirroringSessionIdThe Session number of this mirroring entry. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.20.2.1.1 |
msanPortMirroringAdminStateThe status of this port mirroring session.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.20.2.1.2 |
msanPortMirroringDestPortThe port which traffic from the mirrored ports will be sent to.
Port value is ifIndex from ifTable. Value 0 means, port is not defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.20.2.1.3 |
msanPortMirroringMemberTableDescription. SEQUENCE OF MsanPortMirroringMemberEntry .1.3.6.1.4.1.1332.1.1.5.3.20.3 |
msanPortMirroringMemberEntryDescription. MsanPortMirroringMemberEntry .1.3.6.1.4.1.1332.1.1.5.3.20.3.1 |
msanPortMirroringMemberSrcPortThe port from which traffic will be sent to the destination port. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.20.3.1.1 |
msanPortMirroringMemberDirectionThe direction of the data to be mirrored on this source port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.20.3.1.2 |
msanPortMirroringMemberRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.20.3.1.3 |
msanResetWithDelay OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.21 |
msanResetWithDelayGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.21.1 |
msanResetDelayDelay in seconds before reset will be performed. If set to 0, reset countdown is stopped and reset is cancelled.
This parameter returns number of seconds before reset. If it returns 0, reset with delay was not initiated.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.21.1.1 |
msanMacTable OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.22 |
msanMacTableGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.22.1 |
msanMacTableLengthMaximum number of MAC addresses (total length of MAC table).ro Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.22.1.1 |
msanMacTableUsedNumber of entries in MAC table.ro Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.22.1.2 |
msanMacTableCAMTableDescription. SEQUENCE OF MsanMacTableCAMEntry .1.3.6.1.4.1.1332.1.1.5.3.22.2 |
msanMacTableCAMEntryDescription. MsanMacTableCAMEntry .1.3.6.1.4.1.1332.1.1.5.3.22.2.1 |
msanMacTableCAMIndexId of the CAM entry. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.22.2.1.1 |
msanMacTableMacAddressMAC address of the CAM entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.22.2.1.2 |
msanMacTablePortThe port on which MAC address was learned or defined.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.22.2.1.3 |
msanMacTableVLANVLAN id of the learned or defined MAC address.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.22.2.1.4 |
msanMacTableTypeType of the MAC address.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.22.2.1.5 |
msanAcs OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.23 |
msanAcsGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.23.1 |
msanAcsServerUrlThis is URL of the ACS server in form: http://<IP_or_hostname>/acs. If hostname is used, msanDnsIpAddress and msanAcsDomainName must also be set.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.23.1.1 |
msanPrimaryDnsIpAddressThis specifies the primary DNS server IP .rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.23.1.2 |
msanSecondaryDnsIpAddressThis specifies the secondary DNS server IP .rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.23.1.3 |
msanAcsDomainNameDomain name.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.23.1.4 |
msanAcsClientStatusACS client administrative status.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.23.1.5 |
msanAcsBackupConfBack up configuration (as CLI script) to ACS server.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.23.1.6 |
msanStp OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.24 |
msanStpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.24.1 |
msanStpBpduFilterTableDescription. SEQUENCE OF MsanStpBpduFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.24.2 |
msanStpBpduFilterEntryDescription. MsanStpBpduFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.24.2.1 |
msanStpBpduFilterDefines how BPDU packets are handled in case stp_port_state is disabled.
0 disable - If stp_port_state is disabled on interface, forward all
BPDUs unchanged to all other interfaces that also have stp_port_state
disabled.
1 enable - If stp_port_state is disabled on interface, drop all
BPDUs received on the interface.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.24.2.1.1 |
msanStpSwitchConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.24.3 |
msanStpCstBridgePriorityThe CSTP bridge priority in instance 0. The priority is
in the increments of 4096. The recommended default value is 32768.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.24.3.1 |
msanStpMstTableDescription. SEQUENCE OF MsanStpMstEntry .1.3.6.1.4.1.1332.1.1.5.3.24.4 |
msanStpMstEntryDescription. MsanStpMstEntry .1.3.6.1.4.1.1332.1.1.5.3.24.4.1 |
msanStpMstIdThe MSTP instance ID. Instance 0 is not shown. Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.24.4.1.1 |
msanStpMstBridgePriorityThe MSTP bridge priority in a specific instance. The priority is
in the increments of 4096. The recommended default value is 32768.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.24.4.1.2 |
msanStpMstRowStatusThe MSTP instance status. Instance 0 is not shown.
Supported values:
active(1) - valid instance.
createAndGo(4) - used to create a new instance.
destroy(6) - removes an instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.24.4.1.3 |
msanStpMstVlanTableDescription. SEQUENCE OF MsanStpMstVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.24.5 |
msanStpMstVlanEntryDescription. MsanStpMstVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.24.5.1 |
msanStpMstVlanRowStatusThe association status of an MSTP instance and a VLAN.
Instance 0 is not shown.
Supported values:
active(1) - valid association between an MSTP instance and a VLAN.
createAndGo(4) - used to create a new association between an MSTP instance and a VLAN.
destroy(6) - removes the association between an MSTP instance and a VLAN.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.24.5.1.1 |
msanStpMstPortTableMST port table. SEQUENCE OF MsanStpMstPortEntry .1.3.6.1.4.1.1332.1.1.5.3.24.6 |
msanStpMstPortEntryMST port entry. MsanStpMstPortEntry .1.3.6.1.4.1.1332.1.1.5.3.24.6.1 |
msanStpMstPortPathCostThe MSTP port path cost in a specific instance. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2
which varies depending upon link speed.
Instance 0 is not shown.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.24.6.1.1 |
msanStpMstPortPriorityThe MSTP port priority in a specific instance. The priority is
in the increments of 16. The default value is 128.
Instance 0 is not shown.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.24.6.1.2 |
msanStpPortTableDescription. SEQUENCE OF MsanStpPortEntry .1.3.6.1.4.1.1332.1.1.5.3.24.7 |
msanStpPortEntryDescription. MsanStpPortEntry .1.3.6.1.4.1.1332.1.1.5.3.24.7.1 |
msanStpPortHelloTimeHello time for the STP port. The default value is 0 (Not configured).rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.24.7.1.1 |
msanStpCstPortTableDescription. SEQUENCE OF MsanStpCstPortEntry .1.3.6.1.4.1.1332.1.1.5.3.24.8 |
msanStpCstPortEntryDescription. MsanStpCstPortEntry .1.3.6.1.4.1.1332.1.1.5.3.24.8.1 |
msanStpCstPortPathCostThe MSTP port path cost in CIST. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2
which varies depending upon link speed.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.24.8.1.1 |
msanStpCstExtPortPathCostThe MSTP external port path cost in CIST. The default value varies depending upon the link speed.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.24.8.1.2 |
msanAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.25 |
msanAuthenticationGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.25.1 |
msanAuthenticationListCreateAuthentication List Create
If set to a non empty string, creates a new Authentication List for
configuration.rwdeprecated DisplayString .1.3.6.1.4.1.1332.1.1.5.3.25.2 |
msanAuthenticationListTableDescription. SEQUENCE OF MsanAuthenticationListEntry .1.3.6.1.4.1.1332.1.1.5.3.25.3 |
msanAuthenticationListEntryDescription. MsanAuthenticationListEntry .1.3.6.1.4.1.1332.1.1.5.3.25.3.1 |
msanAuthenticationListNameAuthenticaiton List Name
Unique name used to identify the Authentication List from other tables. DisplayString .1.3.6.1.4.1.1332.1.1.5.3.25.3.1.1 |
msanAuthenticationListMethod1Authenticion List Method 1
Configures the first authentication method to use when this list is
specified.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.25.3.1.2 |
msanAuthenticationListMethod2Authenticion List Method 2
Configures the second authentication method to use when this list is
specified.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.25.3.1.3 |
msanAuthenticationListMethod3Authenticion List Method 3
Configures the third authentication method to use when this list is
specified.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.25.3.1.4 |
msanAuthenticationListStatusThe status of the Authentication List.
Supported values:
active(1) - indicates a valid Authenticaiton List
createAndGo (4)
destroy(6) - removes the Authentication List.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.25.3.1.5 |
msanPortSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.26 |
msanPortSecurityGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.26.1 |
msanPortSecurityStatMacTableDescription. SEQUENCE OF MsanPortSecurityStatMacEntry .1.3.6.1.4.1.1332.1.1.5.3.26.2 |
msanPortSecurityStatMacEntryDescription. MsanPortSecurityStatMacEntry .1.3.6.1.4.1.1332.1.1.5.3.26.2.1 |
msanPortSecurityStatMacIfUnique numerical identification of the interface. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.26.2.1.1 |
msanPortSecurityStatMacVlanIdVLAN identification. INTEGER .1.3.6.1.4.1.1332.1.1.5.3.26.2.1.2 |
msanPortSecurityStatMacMacAddressStatically locked MAC addresses for port. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.26.2.1.3 |
msanPortSecurityStatMacRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.26.2.1.5 |
msanPortSecurityPortVlanTableDescription. SEQUENCE OF MsanPortSecurityPortVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.26.3 |
msanPortSecurityPortVlanEntryDescription. MsanPortSecurityPortVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.26.3.1 |
msanPortSecurityPortVlanDynamicLimitThe limit of dynamically learned MAC addresses per vlan on selected port.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.26.3.1.1 |
msanPortSecurityPortVlanRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.26.3.1.2 |
msanLag OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.27 |
msanLagGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.27.1 |
msanLagDetailedConfigTableA detailed table of the switch's LAG config entries. SEQUENCE OF MsanLagDetailedConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.27.2 |
msanLagDetailedConfigEntrySwitch's LAG config entry MsanLagDetailedConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.27.2.1 |
msanLagDetailedLagIndexLAG index Integer32 .1.3.6.1.4.1.1332.1.1.5.3.27.2.1.1 |
msanLagDetailedIfIndexLAG port index Integer32 .1.3.6.1.4.1.1332.1.1.5.3.27.2.1.2 |
msanLagDetailedPortSpeedLAG port speed. See agentPortType for a description and list
of valid values.rw OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.27.2.1.3 |
msanLagDetailedPortStatusLAG port status.
active(1) - Actively participating in the LAG.
inactive(2) - Not participating in the LAG.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.27.2.1.4 |
msanLagDetailedRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.27.2.1.5 |
msanLagTableConfig table of additional LAG parameters. SEQUENCE OF MsanLagEntry .1.3.6.1.4.1.1332.1.1.5.3.27.3 |
msanLagEntryDescription. MsanLagEntry .1.3.6.1.4.1.1332.1.1.5.3.27.3.1 |
msanLagIndexLAG index. Value corresponds to ifIndex for LAG interfaces in ifTable. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.27.3.1.1 |
msanLagMaxFrameSizeThis object identifies the currently configured maximum frame size
value for this LAG interface.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.27.3.1.2 |
msanLagDVlanTagModeControls the Double Vlan Tag mode on this LAG interface.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.27.3.1.3 |
msanRadiusServer OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.28 |
msanRadiusServerGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.28.1 |
msanRadiusServerConfigTableTable with information about Radius Authentication Server IP
Addresses, port numbers and shared secret SEQUENCE OF MsanRadiusServerConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.28.2 |
msanRadiusServerConfigEntryEntry consisting of configuration data for a Radius
Authentication Server. MsanRadiusServerConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.28.2.1 |
msanRadiusServerAddressIP Address of the configured RADIUS server.
This object cannot be changed after creation. IpAddress .1.3.6.1.4.1.1332.1.1.5.3.28.2.1.1 |
msanRadiusServerPortPort number for the RADIUS server.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.28.2.1.2 |
msanRadiusServerSecretConfigured shared sercret for the RADIUS server.rw DisplayString .1.3.6.1.4.1.1332.1.1.5.3.28.2.1.3 |
msanRadiusServerPrimaryModeConfigure the RADIUS server to be the primary server. If there is any
other server that is configured to be primary, that server is set to be
a seconday server and this entry is set Primary.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.28.2.1.4 |
msanRadiusServerCurrentModeIndicate if the RADIUS server is the current server in user for
authentication.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.28.2.1.5 |
msanRadiusServerMsgAuthEnable or disable the message authenticator attribute for this
RADIUS server.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.28.2.1.6 |
msanRadiusServerStatusCreates or destroys a RADIUS Authentication server entry.
active(1) - This entry is active.
createAndGo(4) - Creates a new entry.
destroy(6) - Deletes an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.28.2.1.7 |
msanNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.29 |
msanNetworkGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.29.1 |
msanNetworkIPAddressThe switch's network ip addressrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.29.1.1 |
msanNetworkSubnetMaskThe switch's network subnet maskrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.29.1.2 |
msanNetworkDefaultGatewayThe switch's network default gatewayrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.29.1.3 |
msanNetworkDhcpSrvIpAddrIP address of DHCP server used by DHCP client.ro IpAddress .1.3.6.1.4.1.1332.1.1.5.3.29.1.4 |
msanNetworkDhcpSrvVendorSpecificDHCP client uses only vendor specific DHCP servers
(when client sends opt. 60 to server, it should return expected vendor specific value in opt. 43)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.29.1.5 |
msanNetworkDhcpClientLeaseObtainedThe date and time when DHCP lease was obtained.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.29.1.6 |
msanNetworkDhcpClientLeaseExpiresThe date and time for which the DHCP lease is valid.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.29.1.7 |
msanNetworkDhcpClientLocalOpt82DHCP client adds relay agent information option into its own outgoing frames.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.29.1.8 |
msanNetworkDhcpClientVlanTableDHCP client configuration per vlan id. SEQUENCE OF MsanNetworkDhcpClientVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.29.2 |
msanNetworkDhcpClientVlanEntryDescription. MsanNetworkDhcpClientVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.29.2.1 |
msanNetworkDhcpClientVlanLocalOpt82DHCP client on specified vlan adds relay agent information option into its own outgoing frames.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.29.2.1.1 |
msanStormControl OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.30 |
msanStormControlGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.30.1 |
msanPortStormControlTableDescription. SEQUENCE OF MsanPortStormControlEntry .1.3.6.1.4.1.1332.1.1.5.3.30.2 |
msanPortStormControlEntryDescription. MsanPortStormControlEntry .1.3.6.1.4.1.1332.1.1.5.3.30.2.1 |
msanPortBroadcastControlModehe switch config broadcast allows you to enable or disable
broadcast storm recovery mode. When you specify Enable for Broadcast
Storm Recovery and the broadcast traffic on any Ethernet port exceeds
the configured threshold, the switch blocks (discards) the broadcast
traffic.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.30.2.1.1 |
msanPortBroadcastControlThresholdSpecify the data rate at which broadcast storm control activates (packets per second)rw Integer32 UNITS "packets per second" .1.3.6.1.4.1.1332.1.1.5.3.30.2.1.2 |
msanPortMulticastControlModeThe switch config multicast allows you to enable or disable
multicast storm recovery mode. When you specify Enable for multicast
Storm Recovery and the multicast traffic on any Ethernet port exceeds
the configured threshold, the switch blocks (discards) the multicast
trafficrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.30.2.1.3 |
msanPortMulticastControlThresholdSpecify the data rate at which multicast storm control activates (packets per second)rw Integer32 UNITS "packets per second" .1.3.6.1.4.1.1332.1.1.5.3.30.2.1.4 |
msanPortUnicastControlModeThe switch config unicast allows you to enable or disable
unicast storm recovery mode. When you specify Enable for unicast
Storm Recovery and the unknown unicast traffic on any Ethernet port exceeds
the configured threshold, the switch blocks (discards) the unknown unicast
traffic.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.30.2.1.5 |
msanPortUnicastControlThresholdSpecify the data rate at which unicast storm control activates (packets per second)rw Integer32 UNITS "packets per second" .1.3.6.1.4.1.1332.1.1.5.3.30.2.1.6 |
msanUserConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.31 |
msanUserConfigGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.31.1 |
msanUserConfigCheckPasswordParameter is used to check user's password. String must
be written in next format: user_name password
First blank space is used as delimeter between user_name and
password.
If password is not valid or user is not configured,
inconsistentValue(12)error code will be returned.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.31.1.1 |
msanUserConfigTableDescription. SEQUENCE OF MsanUserConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.31.2 |
msanUserConfigEntryDescription. MsanUserConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.31.2.1 |
msanUserIndexUser Config Index Integer32 .1.3.6.1.4.1.1332.1.1.5.3.31.2.1.1 |
msanUserAccessModeUser Access Moderw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.31.2.1.2 |
msanSfp OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.32 |
msanSfpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.32.1 |
msanSfpInfoTableDescription. SEQUENCE OF MsanSfpInfoEntry .1.3.6.1.4.1.1332.1.1.5.3.32.2 |
msanSfpInfoEntryDescription. MsanSfpInfoEntry .1.3.6.1.4.1.1332.1.1.5.3.32.2.1 |
msanSfpInfoStateModule state value on port. Ports which support SFP module are from
1 to 10 and from 15 to 28. State value adminOff means that specific
port is administrative disabled and we can not read data from module
on that port. Operational state means that SFP module is present and
it works perfect. State operWithAl(operational with alarm) means
that SFP module is present, but it works with internal alarms.
Loss(Loss of signal) state means that SFP module is present but it
have loss of signal. PresNoDiag(Present, no diagnostic) state means
that SFP module is present but diagnostic is not supported.
NotAvaliable state means that admin. mode of specific port has
disabled value and SFP state is not avaliable.
NotPresent state means that SFP module is not present.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.1 |
msanSfpInfoInterfaceTypeTransceiver(module) type.
Module type can be SFP, NOT(mudule type is not SFP),
NO(no module on port), AD(admin. disabled port) and XFP.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.2 |
msanSfpInfoNominalBitrateModule(SFP) nominal bitrate value measure in Mbit/s.
If parameter is not available, value -1 is used.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.3 |
msanSfpInfoNominalRangeModule(SFP) nominal range value.
Nominal range value can support five different link lengths.
Link length value and nominal range units are defined depends
on value of nominal range.
We can get link length value which can support 9/125 um fiber
and nominal range measure in km units.
We can get link length value which can support 9/125 um fiber
and nominal range measure in 100m units.
We can get link length value which can support 50/125 um fiber
and nominal range measure in 10m units.
We can get link length value which can support 62,5/125 um fiber
and nominal range measure in 10m units.
We can get link length value which can support cooper
and nominal range measure in m units.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.4 |
msanSfpInfoVendorModule(SFP) vendor name.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.5 |
msanSfpInfoIeeeVendorIdModule(SFP) vendor IEEE company ID.
If parameter is not available, value -1 is used.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.6 |
msanSfpInfoPartNrModule(SFP) part number.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.7 |
msanSfpInfoRevisionNrModule(SFP) revision number.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.8 |
msanSfpInfoSerialNrModule(SFP) serial number.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.9 |
msanSfpInfoManufacturingDateModule(SFP) manufacturing date.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.10 |
msanSfpInfoWavelengthModule(SFP) laser wavelength measure in nanometers.
If parameter is not available, value -1 is used.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.32.2.1.11 |
msanSfpDiagnosticsTableDescription. SEQUENCE OF MsanSfpDiagnosticsEntry .1.3.6.1.4.1.1332.1.1.5.3.32.3 |
msanSfpDiagnosticsEntryDescription. MsanSfpDiagnosticsEntry .1.3.6.1.4.1.1332.1.1.5.3.32.3.1 |
msanSfpDiagnosticsSignalModule(SFP) signal value.
If diagnostic for SFP module is supported than value can be
OK(signal is ok) or loss(loss of signal), in the other case
the value is set on notSupported becouse diagnostic is not
supported(-1).ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.1 |
msanSfpDiagnosticsTempCurrentCurrent SFP module temperature value in [deg C].
If diagnostic is not supported for SFP module then
current temperature is set on not supported value(-129).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.2 |
msanSfpDiagnosticsTempMinSFP module minimum temperature threshold limit in [deg C].
If diagnostic is not supported for SFP module then minimum
temperature threshold limit is set on not supported value(-129).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.3 |
msanSfpDiagnosticsTempMaxSFP module maximum temperature threshold limit in [deg C].
If diagnostic is not supported for SFP module then maximum
temperature threshold limit is set on not supported value(-129).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.4 |
msanSfpDiagnosticsVoltageCurrentCurrent SFP module supply voltage value in [V].
If diagnostic is not supported for SFP module then
current supply voltage is set on not supported value(-1).ro Integer32 UNITS "0.01 V" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.6 |
msanSfpDiagnosticsVoltageMinSFP module minimum supply voltage threshold limit in [V].
If diagnostic is not supported for SFP module then minimum
supply voltage threshold limit is set on not supported value(-1).ro Integer32 UNITS "0.01 V" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.7 |
msanSfpDiagnosticsVoltageMaxSFP module maximum supply voltage threshold limit in [V].
If diagnostic is not supported for SFP module then maximum
supply voltage threshold limit is set on not supported value(-1).ro Integer32 UNITS "0.01 V" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.8 |
msanSfpDiagnosticsTxBiasCrrCurrentCurrent SFP module Tx Bias Current value in [mA].
If diagnostic is not supported for SFP module then
current Tx Bias Current is set on not supported value(-1).ro Integer32 UNITS "0.01 mA" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.9 |
msanSfpDiagnosticsTxBiasCrrMinSFP module minimum Tx Bias Current threshold limit in [mA].
If diagnostic is not supported for SFP module then minimum
Tx Bias Current threshold limit is set on not supported value(-1).ro Integer32 UNITS "0.01 mA" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.10 |
msanSfpDiagnosticsTxBiasCrrMaxSFP module maximum Tx Bias Current threshold limit in [mA].
If diagnostic is not supported for SFP module then maximum
Tx Bias Current threshold limit is set on not supported value(-1).ro Integer32 UNITS "0.01 mA" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.11 |
msanSfpDiagnosticsTxPowerCurrentCurrent SFP module transmitted optical output power value in [mW].
If diagnostic is not supported for SFP module then current
transmitted optical output power is set on not supported value(-1).ro Integer32 UNITS "0.01 mW" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.12 |
msanSfpDiagnosticsTxPowerMinSFP module minimum transmitted optical output power threshold limit
in [mW]. If diagnostic is not supported for SFP module then minimum
transmitted optical output power is set on not supported value(-1).ro Integer32 UNITS "0.01 mW" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.13 |
msanSfpDiagnosticsTxPowerMaxSFP module maximum transmitted optical output power threshold limit
in [mW]. If diagnostic is not supported for SFP module then maximum
transmitted optical output power is set on not supported value(-1).ro Integer32 UNITS "0.01 mW" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.14 |
msanSfpDiagnosticsRxPowerCurrentCurrent SFP module received optical input power value in [mW].
If diagnostic is not supported for SFP module then current
received optical input power is set on not supported value(-1).ro Integer32 UNITS "0.0001 mW" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.15 |
msanSfpDiagnosticsRxPowerMinSFP module minimum received optical input power threshold limit
in [mW]. If diagnostic is not supported for SFP module then minimum
received optical input power is set on not supported value(-1).ro Integer32 UNITS "0.0001 mW" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.16 |
msanSfpDiagnosticsRxPowerMaxSFP module maximum received optical input power threshold limit
in [mW]. If diagnostic is not supported for SFP module then maximum
received optical input power is set on not supported value(-1).ro Integer32 UNITS "0.0001 mW" .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.17 |
msanSfpDiagnosticsTempStatusTemperature alarm status.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.19 |
msanSfpDiagnosticsVoltageStatusVoltage alarm status.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.20 |
msanSfpDiagnosticsTxBiasStatusTX bias alarm status.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.21 |
msanSfpDiagnosticsTxPowerStatusTX power alarm status.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.22 |
msanSfpDiagnosticsRxPowerStatusRX power alarm status.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.32.3.1.23 |
msanMacSg OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.34 |
msanMacSgGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.34.1 |
msanMacSgStatusAdministrative state of MAC Source Guard on the system.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.34.1.1 |
msanMacSgPortTableDescription. SEQUENCE OF MsanMacSgPortEntry .1.3.6.1.4.1.1332.1.1.5.3.34.2 |
msanMacSgPortEntryDescription. MsanMacSgPortEntry .1.3.6.1.4.1.1332.1.1.5.3.34.2.1 |
msanMacSgPortStatusAdministrative state of MAC Source Guard on interface.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.34.2.1.1 |
msanMacSgPortViolationsCounterMAC Source Guard Violations counterro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.34.2.1.2 |
msanErrorDisable OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.35 |
msanErrorDisableGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.35.1 |
msanErrorDisableIntervalThe interval in minutes that will pass since error-disabled interface
will be enabled. This parameter has effect only if ErrorDisable Recovery
is enabled.rw Integer32 UNITS "minutes" .1.3.6.1.4.1.1332.1.1.5.3.35.1.1 |
msanErrorDisableMacSgDetectionStatusAdministrative state of ErrorDisable Detection for MAC Source Guard cause.
If enabled, interface will be error-disabled when MAC Source Guard violation
is detected.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.35.1.2 |
msanErrorDisableMacSgRecoveryStatusAdministrative state of ErrorDisable Recovery for MAC Source Guard cause.
If enabled, interface will be automatically recovered when error-disabled
due to MAC Source Guard violation.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.35.1.3 |
msanErrorDisablePortTableDescription. SEQUENCE OF MsanErrorDisablePortEntry .1.3.6.1.4.1.1332.1.1.5.3.35.2 |
msanErrorDisablePortEntryDescription. MsanErrorDisablePortEntry .1.3.6.1.4.1.1332.1.1.5.3.35.2.1 |
msanErrorDisablePortStatusThis parameter shows which interfaces are in errorDisable(2)
recovery administrative state.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.35.2.1.1 |
msanErrorDisablePortCauseCause for errorDisable(2) status on interface.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.35.2.1.2 |
msanErrorDisablePortTimeLeftTime in seconds which defines how much time left for
interface to stay in errorDisable(2) state.ro Integer32 UNITS "sec" .1.3.6.1.4.1.1332.1.1.5.3.35.2.1.3 |
msanErrorDisablePortCounterThe number of times the specified interface has been in errorDisable(2) state.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.35.2.1.4 |
msanAdsl OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.36 |
msanAdslGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.36.1 |
msanAdslAtucPhysExtnTableThis table provides one row for each ATUC. This table is an extention to adslAtucPhysTable defined in rfc-2662. SEQUENCE OF MsanAdslAtucPhysExtnEntry .1.3.6.1.4.1.1332.1.1.5.3.36.2 |
msanAdslAtucPhysExtnEntryAn entry (conceptual row) in the msanAdslAtucPhysExtnTable.
The Table is indexed by ifIndex. MsanAdslAtucPhysExtnEntry .1.3.6.1.4.1.1332.1.1.5.3.36.2.1 |
msanAdslAtucPhysExtnOpStateThis object indicates the operational state of the ATU. Values include idle, handshake, training, etc.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.1 |
msanAdslAtucPhysExtnActualStdThis object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.2 |
msanAdslAtucPhysExtnBertErrorThis object indicates the No. of bit errors detected during BERT.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.3 |
msanAdslAtucPhysExtnTxAtmCellCounterThis object Provides transmit ATM cell counter.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.4 |
msanAdslAtucPhysExtnRxAtmCellCounterThis object Provides receive ATM cell counter.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.5 |
msanAdslAtucPhysExtnStartProgressThis object provides current detailed start up information to be used for debugging.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.6 |
msanAdslAtucPhysExtnIdleBertErrorNumber of bit errors.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.7 |
msanAdslAtucPhysExtnIdleBertCellsNumber of idle cells.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.8 |
msanAdslAtucPhysExtnBertSyncIndicates if the Signal is in Sync or not.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.9 |
msanAdslAtucPhysExtnParametricTestResultIndicates the Result of the Parametric Test conducted on the Xcvr.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.10 |
msanAdslAtucPhysExtnSeltInfoValidIndicates the information validity for the SELT operation conducted on the Xcvr.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.11 |
msanAdslAtucPhysExtnSeltLoopLenIndicates the LOOP Length in Feet once when the SELT information is valid on the Xcvr.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.12 |
msanAdslAtucPhysExtnSeltLoopEndIndicates whether the loop is short or open once when the SELT information is valid on the Xcvr.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.13 |
msanAdslAtucPhysExtnSeltLoopGaugeIndicates the LOOP wire_gauge information once when the SELT information is valid on the Xcvr.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.14 |
msanAdslAtucPhysExtnSeltUpShannonCapIndicates the LOOP Upstream Shannon Capacity (in bps) once when the SELT information is valid on the Xcvr.ro Gauge32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.15 |
msanAdslAtucPhysExtnSeltDownShannonCapIndicates the LOOP Downstream Shannon Capacity (in bps) once when the SELT information is valid on the Xcvr.ro Gauge32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.16 |
msanAdslAtucPhysExtnSeltInbandNoise512 values that indicate inband noise length in dBM/Hz, covering both bands from 0 to 1.1 MHz.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.17 |
msanAdslAtucPhysExtnSeltTerminationResp180 discrete values that indicate termination response magnitude from 0 to 18Kft.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.18 |
msanAdslAtucPhysExtnSeltUpMgnAtRate300 values that indicate SNR margin in dB/10 at a particular rate are provided, at 100K increments, up to 15 Mbps.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.19 |
msanAdslAtucPhysExtnSeltDownMgnAtRate300 values that indicate SNR margin in dB/10 at a particular rate are provided, at 100K increments, up to 15 Mbps.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.20 |
msanAdslAtucPhysExtnDataBoostStatusThis object indicates whether DataBoost is utilized for the connection.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.21 |
msanAdslAtucPhysExtnTestArrayThis object indicates the Parametric Test Array. Every Four octets refer to one element in this array of octets.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.22 |
msanAdslAtucPhysExtnChanPerfCDThe near-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state. (Not available for ADSL).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.23 |
msanAdslAtucPhysExtnChanPerfBEThe near-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the near-end. (Not available for ADSL).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.24 |
msanAdslAtucPhysExtnDeltHLINSCusDELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values.(Not available for ADSL and ADSL2plus).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.25 |
msanAdslAtucPhysExtnDeltHLINpsusDELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.26 |
msanAdslAtucPhysExtnDeltHLOGMTusDELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f).(Not available for ADSL and ADSL2plus).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.27 |
msanAdslAtucPhysExtnDeltHLOGpsusDELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.28 |
msanAdslAtucPhysExtnDeltQLNMTusDELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL and ADSL2plus).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.29 |
msanAdslAtucPhysExtnDeltQLNpsusDELT-related parameter that provides an array of real upstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.30 |
msanAdslAtucPhysExtnDeltLastTxStateDELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus).ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.31 |
msanAdslAtucPhysExtnPMStateLine Power Management State. (Not available for ADSL).ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.32 |
msanAdslAtucPhysExtnChanPerfCUThe near-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATU-R) interface. (Not available for ADSL).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.33 |
msanAdslAtucPhysExtnExtendedPsdStatusConexant parameter that indicates whether an extended upstream PSD is used - for G.Span Plus mode of operation only. Only supported for G.Span Plus, therefore this parameter is not valid for ADSL2/ADSL2plus modes of operation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.34 |
msanAdslAtucPhysExtnChipVersionConexant parameter that indicates the DSP version number.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.35 |
msanAdslAtucPhysExtnPilotToneConexant parameter that indicates the Pilot Tone Index.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.36 |
msanAdslAtucMSGdsIndicates the Overhead Channel. This feature is not supported by DSLPHY as yet.ro Gauge32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.37 |
msanAdslAtucPhysExtnPsdMaskModeConexant parameter that indicates the actual Psd Mask currently being used.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.38 |
msanAdslAtucPhysExtnDeltSNRMTusDELT-related parameter that provides the number of symbols used to measure the upstream SNR(f) values. (Not available for ADSL and ADSL2plus)ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.39 |
msanAdslAtucPhysExtnDeltCurrStatusThis Conexant parameter indicates the current status of Atuc Line in DELT mode.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.40 |
msanAdslAtucSATNDELT-related parameter that provides the upstream signal attenuation (length = 4 bytes). (Not available for ADSL and ADSL2plus). For further details, Refer to Section 7.5.1.9 Revised Recommendation G.997.1.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.41 |
msanAdslAtucPhysExtnSystemVendorIdIndicates the Vendor ID as inserted by the ATU-C in the Overhead Messages(ADSL2). Typically identifies the ATU-C system integrator which usually refers to the vendor of the smallest field-replaceable unit. ATU-C System Vendor ID may not be the same as ATU-C Vendor ID. It is not available for ADSL. This is string of 8 octets containing 2 octet country code , 4 octet vendor id and 2 octet vendor revision number.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.42 |
msanAdslAtucPhysExtnSelfTestResultDefines the ATU-C selftest result. The most significant octet is: 00 hex if the self-test passed or 01 hex if the self-test failed. Interpretation of the other octets is vendor discretionary and can be interpreted in combination with G.994.1 and system Vendor IDs. For further details, refer to Section 7.4.9 Revised Recommendation G.997.1.ro Gauge32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.43 |
msanAdslAtucPhysExtnG9941VendorIdIndicates the Vendor ID as inserted by the ATU-C in the G.994.1 CL message. Typically identifies the vendor of the ATU-C G.994.1 functionality. This is string of 8 octets containing 2 octet country code , 4 octet vendor id and 2 octet vendor revision number. For further details, refer to Section 7.4.1 Revised Recommendation G.997.1.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.44 |
msanAdslAtucPhysExtnTsspsUsThis parameter provides the Upstream Transmit Spectrum Shaping parameter expressed as the set of break points exchanged during G994.1. Each breakpoint consists in a subcarrier index and the associated shaping parameter. Value of this parameter is in range 0 - 127, in multiples of -0.5 dB. 127 is a special value indicating the subcarrier is not transmitted. It is available only for ADSL2/ADSL2plus.For further details, Refer to Section 7.5.1.21.5 Revised Recommendation G.997.1.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.45 |
msanAdslAtucPhysExtnActPsdUsThis parameter defines the average upstream transmit power spectrum density over the used subcarriers delivered by the ATU-C at the U-C reference point, at the instant of measurement. It's value ranges from -90 to 0, in 0.1 dB/Hz steps. It is available only for ADSL2/ADSL2plus. For further details, Refer to Section 7.5.1.14 Revised Recommendation G.997.1.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.46 |
msanAdslAtucPhysExtnGainspsUsThis parameter defines the upstream gains allocation table per subcarrier. It is an array of integer values in the 0 to 4093 range for subcarriers 0 to NSCus-1. The gain value is represented as a multiple of 1/512 on linear scale. It is supported for ADSL2/ADSl2plus only.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.47 |
msanAdslAtucPhysExtnStartBinThis Gspan++ parameter indicates the start bin of the bit loading up array.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.48 |
msanAdslAtucPhysExtnStartupErrorCodeConexant parameter which indicates the startup error code.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.49 |
msanAdslAtucPhysExtnBitSwapCountThis Conexant parameter indicates the bit swap count. It can read only in data modero Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.50 |
msanAdslAtucPhysExtnModPhaseConexant parameter to monitor the status of MoDro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.2.1.51 |
msanAdslLineExtnTableThis table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. This Table is an extension to adslLineTable defined in rfc-2662. SEQUENCE OF MsanAdslLineExtnEntry .1.3.6.1.4.1.1332.1.1.5.3.36.3 |
msanAdslLineExtnEntryAn entry (conceptual row) in the msanAdslLineExtnTable.
The Table is indexed by ifIndex. MsanAdslLineExtnEntry .1.3.6.1.4.1.1332.1.1.5.3.36.3.1 |
msanAdslLineExtnActionthis object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.1 |
msanAdslLineExtnUtopiaL2RxAddrThis object indicates UTOPIA Level 2 Rx address for a line.ro INTEGER .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.2 |
msanAdslLineExtnUtopiaL2TxAddrThis object indicates UTOPIA Level 2 Tx address for a line.ro INTEGER .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.3 |
msanAdslLineExtnTransAtucCapThe transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1.ro Bits .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.4 |
msanAdslLineExtnTransAtucActualThe transmission mode of the ATU-C. This object returns if there is no mode currently known. The initialization with the ATU-R will determine the mode used. REFERENCE Section 7.3.2 ITU G.997.1.ro Bits .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.5 |
msanAdslLineExtnClockTypeThis object indicates parameter to set use of either crystal or oscillator.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.6 |
msanAdslLineExtnLineDmtTrellisParameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.7 |
msanAdslLineExtnTransAturCapThe transmission modes that the ATU-R is capable of supporting. The modes available are limited by the design of the equipment.ro Bits .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.8 |
msanAdslLineExtnPMConfPMSFPM-related parameter used by the ATU-C to force a change in the line state.(Not available for ADSL/ADSL2Plus).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.9 |
msanAdslLineExtnDeltConfLDSFDELT-related parameter used by the ATU-C to force the line into loop diagnostics mode.(Not available for ADSL and ADSL2plus).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.10 |
msanAdslLineExtnTransAtucConfigThe transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1.rw Bits .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.11 |
msanAdslLineExtnAtucCurrOutputPwrThis parameter indicates the measure of total output power transmitted by this ATU. The value of this parameter is dynamic and will also show the change in Tx power due to Power Management. For example, the value will decrease in L2 low power mode. This value can be negativero Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.12 |
msanAdslLineExtnAtucBinSNRMarginThis Conexant parameter is an array of upstream SNR Margin values in dB. Each array entry represents the SNR Margin value for particular sub carrier.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.13 |
msanAdslLineExtnUtopiaL2RxAddrSecondConexant parameter to set UTOPIA Level 2 Rx address for the secondary bearer channel in case of Dual Latency.ro INTEGER .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.14 |
msanAdslLineExtnUtopiaL2TxAddrSecondConexant parameter to set UTOPIA Level 2 Tx address for the secondary bearer channel in case of Dual Latency.ro INTEGER .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.15 |
msanAdslLineExtnDsBinSnrUpdateConexant parameter to enable or disable collection of downstream SNR bin statusrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.16 |
msanAdslLineExtnServiceTypeThe service type configured in ADSL configuration profile which applies for this line.
Supported values:
1: multimode
2: reserved
3: T1_413
4: G.DMT
6: ADSL2+
7: ADSL2
8: ADSL2+ AUTO[+Annex M]
9: ADSL2 AUTO[+Annex M]
10: READSL2ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.3.1.17 |
msanAdslAturPhysExtnTableThis table is an extention to adslAtucPhysTable defined in rfc-2662. This table provides one row for each ATUR. Each row contains the Physical Layer Parameters table for that ATUR. SEQUENCE OF MsanAdslAturPhysExtnEntry .1.3.6.1.4.1.1332.1.1.5.3.36.4 |
msanAdslAturPhysExtnEntryAn entry (conceptual row) in the msanAdslAturPhysExtnTable.
The Table is indexed by ifIndex. MsanAdslAturPhysExtnEntry .1.3.6.1.4.1.1332.1.1.5.3.36.4.1 |
msanAdslAturPhysExtnConfigThis object provides the upstream and downstream ATU-R configuration data, as defined in T1.413 i2, Sections 6.4, 6.6, 7.4, 7.6 and Table 27.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.1 |
msanAdslAturPhysExtnChanPerfCDThe far-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state.(Not available for ADSL).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.2 |
msanAdslAturPhysExtnChanPerfCUThe far-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATUR) interface. (Not available for ADSL).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.3 |
msanAdslAturPhysExtnChanPerfBEThe far-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the far-end. (Not available for ADSL).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.4 |
msanAdslAturPhysExtnDeltHLINSCdsDELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values.(Not available for ADSL and ADSL2plus).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.5 |
msanAdslAturPhysExtnDeltHLINpsdsDELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.6 |
msanAdslAturPhysExtnDeltHLOGMTdsDELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL and ADSL2plus).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.7 |
msanAdslAturPhysExtnDeltHLOGpsusDELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus).ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.8 |
msanAdslAturPhysExtnDeltQLNMTdsDELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL and ADSL2plus).ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.9 |
msanAdslAturPhysExtnDeltQLNpsdsDELT-related parameter that provides an array of real downstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.10 |
msanAdslAturPhysExtnDeltLastTxStateDELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus).ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.11 |
msanAdslAturMSGusIndicates the Overhead Channel. This feature is not supported by DSLPHY as yet.ro Gauge32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.12 |
msanAdslAturDeltSNRMTdsDELT-related parameter that provides the number of symbols used to measure the downstream SNR(f) values. (Not available for ADSL and ADSL2plus)ro Gauge32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.13 |
msanAdslAturSATNDELT-related parameter that provides the downtream signal attenuation (length = 4 bytes). (Not available for ADSL and ADSL2plus). For further details, Refer to Section 7.5.1.9 Revised Recommendation G.997.1.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.14 |
msanAdslAturPhysExtnSystemVendorIdIndicates the Vendor ID as inserted by the ATU-R in the Embedded Operations Channel(ADSL). Typically identiies the ATU-R system integrator which usually refers to the vendor of the smallest field-replaceable unit. ATU-R System Vendor ID may not be the same as ATU-R G.994.1 Vendor ID. For ADSL2, provides the Vendor ID as inserted by the ATU-R in the Overhead Messages. It is not available for ADSL. This is string of 8 octets containing 2 octet country code , 4 octet vendor id and 2 octet vendor revision number.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.15 |
msanAdslAturPhysExtnGainspsDsThis parameter defines the downstream gains allocation table per bin. For further details, Refer to Section 7.5.1.21.3 Revised Recommendation G.997.1. It is supported for ADSL2/ADSl2plus only.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.16 |
msanAdslAturPhysExtnSelfTestResultDefines the ATU-R selftest result. The most significant octet is: 00 hex if the self-test passed or 01 hex if the self-test failed. Interpretation of the other octets is vendor discretionary and can be interpreted in combination with G.994.1 and system Vendor IDs. For further details, refer to Section 7.4.10 Revised Recommendation G.997.1.ro Gauge32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.17 |
msanAdslAturPhysExtnG9941VendorIdIndicates the Vendor ID as inserted by the ATU-R in the G.994.1 CLR message.The G.994.1 Vendor ID typically identifies the vendor of the ATU-R G.994.1 functionality. This is string of 8 octets containing 2 octet country code , 4 octet vendor id and 2 octet vendor revision number. For further details, refer to Section 7.4.2 Revised Recommendation G.997.1.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.18 |
msanAdslAturPhysExtnTsspsDsThis parameter provides the Downstream Transmit Spectrum Shaping parameter expressed as the set of break points exchanged during G994.1. Value of this parameter is in range 0 - 127, in multiples of -0.5 dB. 127 is a special value indicating the subcarrier is not transmitted. It is available only for ADSL2/ADSL2plus. For further details, Refer to Section 7.5.1.21.5 Revised Recommendation G.997.1ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.19 |
msanAdslAturPhysExtnActPsdDsThis parameter defines the average downstream transmit power spectrum density over the used subcarriers delivered by the ATU-C at the U-C reference point, at the instant of measurement. It's value ranges from -90 to 0, in 0.1 dB/Hz steps. It is available only for ADSL2/ADSL2plus.For further details, Refer to Section 7.5.1.14 Revised Recommendation G.997.1.ro Integer32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.20 |
msanAdslAturPhysExtnBitSwapCountThis Conexant parameter indicates the bit swap count. It can read only in data modero Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.21 |
msanAdslAturPhysExtnPsdMaskModeThis conexant parameter that indicates the actual PSD Mask currently being used by ATU-Rro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.36.4.1.22 |
msanEaps OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.37 |
msanEapsGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.37.1 |
msanEapsAdminStateGlobal EAPS administrative state.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.37.1.1 |
msanEapsDomainTableEAPS domain configuration. SEQUENCE OF MsanEapsDomainEntry .1.3.6.1.4.1.1332.1.1.5.3.37.2 |
msanEapsDomainEntryDescription. MsanEapsDomainEntry .1.3.6.1.4.1.1332.1.1.5.3.37.2.1 |
msanEapsDomainNameDescription of the EAPS domain. Each msanEapsDomainName value in this
table must be unique. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.37.2.1.2 |
msanEapsDomainDeviceRoleRole of the node in the EAPS domain (Master or Transit)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.37.2.1.3 |
msanEapsDomainHelloTimeEAPS domain hello frame send interval.
This value must be lower than msanEapsDomainFailTimeoutrw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.37.2.1.4 |
msanEapsDomainFailTimeoutEAPS fail timeout.
This value must be higher than msanEapsDomainHelloTimerw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.37.2.1.5 |
msanEapsDomainAdminStateEAPS domain administrative state.
State can be changed from disable to enable only when all parameters
in this table are defined.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.37.2.1.6 |
msanEapsDomainPrimaryIfIndexEAPS primary interface. The value must be different from msanEapsSecondaryIfIndex.
The interface identified by a particular value of this index is the same
interface as identified by the same value of ifIndex.
ifType of selected interface can be ethernetCsmacd(6) or ieee8023adLag (161).
This parameter can be undefined when EAPS domain is created and msanEapsDomainAdminState
is disable.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.37.2.1.7 |
msanEapsDomainSecondaryIfIndexEAPS secondary interface. The value must be different from msanEapsPrimaryIfIndex.
The interface identified by a particular value of this index is the same
interface as identified by the same value of ifIndex.
ifType of selected interface can be ethernetCsmacd(6) or ieee8023adLag (161).
This parameter can be undefined when EAPS domain is created and msanEapsDomainAdminState
is disable.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.37.2.1.8 |
msanEapsDomainCntrlVlanIdEAPS control VLAN ID.
Selected VLAN ID must exists in dot1qVlanStaticTable.
This parameter can be undefined when EAPS domain is created and msanEapsDomainAdminState
is disable.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.37.2.1.9 |
msanEapsDomainRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].
If msanEapsDomainAdminState is disable, created row can be actived by row status object
also when next parameters are not defined:
- msanEapsDomainPrimaryifIndex
- msanEapsDomainSecondaryifIndex
- msanEapsDomainCntrlVlanIdrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.37.2.1.10 |
msanEapsDomainProtVlanTableList of protected VLANs for EAPS domain. SEQUENCE OF MsanEapsDomainProtVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.37.3 |
msanEapsDomainProtVlanEntryDescription. MsanEapsDomainProtVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.37.3.1 |
msanEapsDomainProtVlanRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.37.3.1.1 |
msanCpe OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.38 |
msanCpeGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.38.1 |
msanCpeResetReset CPE equipment connected to selected interface index (ifIndex).rw Unsigned32 UNITS "ifIndex" .1.3.6.1.4.1.1332.1.1.5.3.38.1.1 |
msanCpeSendConfigApply configuration to CPE equipment connected to
selected interface index (ifIndex).rw Unsigned32 UNITS "ifIndex" .1.3.6.1.4.1.1332.1.1.5.3.38.1.2 |
msanCpeApiMajorVersionCPE API major version information.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.38.1.3 |
msanCpeApiMinorVersionCPE API minor version information.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.38.1.4 |
msanCpeTypeTableList of possible CPE types. SEQUENCE OF MsanCpeTypeEntry .1.3.6.1.4.1.1332.1.1.5.3.38.2 |
msanCpeTypeEntryDescription. MsanCpeTypeEntry .1.3.6.1.4.1.1332.1.1.5.3.38.2.1 |
msanCpeTypeNameUsage name of CPE model. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.38.2.1.1 |
msanCpeTypePortNumNumber of CPE user ports.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.38.2.1.2 |
msanCpeIntfTypeTableTabel defines which CPE model can be connected to selected interface. SEQUENCE OF MsanCpeIntfTypeEntry .1.3.6.1.4.1.1332.1.1.5.3.38.3 |
msanCpeIntfTypeEntryDescription. MsanCpeIntfTypeEntry .1.3.6.1.4.1.1332.1.1.5.3.38.3.1 |
msanCpeIntfTypeRowStatusThe row status object controls the creation/deletion of rows in this table.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.38.3.1.1 |
msanCpeIntfTypeHwVersionConnected CPE hardware version.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.38.3.1.2 |
msanCpeIntfTypeSwVersionConnected CPE software version.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.38.3.1.3 |
msanCpeIntfPortTableTable of CPE ports parameters SEQUENCE OF MsanCpeIntfPortEntry .1.3.6.1.4.1.1332.1.1.5.3.38.4 |
msanCpeIntfPortEntryDescription. MsanCpeIntfPortEntry .1.3.6.1.4.1.1332.1.1.5.3.38.4.1 |
msanCpeIntfPortIdCPE port ID (1 .. n). INTEGER .1.3.6.1.4.1.1332.1.1.5.3.38.4.1.1 |
msanCpeIntfPortPowerModePower mode of the CPE port. When port is in Sleep(2) mode,
automatic wake-up is also activated.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.4.1.2 |
msanCpeIntfPortLinkModeSpeed and duplex mode of the CPE port.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.4.1.3 |
msanCpeIntfPortPvidDefault Vlan ID (pVID) for selected CPE port.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.38.4.1.4 |
msanCpeIntfPortCosDefault CoS bit settings for the CPE port.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.38.4.1.5 |
msanCpeIntfPortOverrideVidWhen enable(1)VLAN ID of received tagged frame on selected CPE port
is overwritten with default VLAN ID (msanCpeIntfPortPvid).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.4.1.6 |
msanCpeIntfPortOverrideCosWhen enable(1)CoS value of received tagged frame on selected CPE port
is overwritten with default CoS bit settings (msanCpeIntfPortCos).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.4.1.7 |
msanCpeIntfPortProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanAclProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.4.1.8 |
msanCpeIntfPortStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.4.1.9 |
msanCpeTrafficTableDescription. SEQUENCE OF MsanCpeTrafficEntry .1.3.6.1.4.1.1332.1.1.5.3.38.5 |
msanCpeTrafficEntryDescription. MsanCpeTrafficEntry .1.3.6.1.4.1.1332.1.1.5.3.38.5.1 |
msanCpeTrafficIdNumber identifying traffic configuration (1 .. n). Integer32 .1.3.6.1.4.1.1332.1.1.5.3.38.5.1.1 |
msanCpeTrafficNameName identifying traffic configuration. Must be unique value.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.38.5.1.2 |
msanCpeTrafficSpeedMaximum bitrate of services using this traffic configuration.
Domain value is 0-100000kbit/s, where:
- for speeds below 1Mbit/s step is 64kbit/s
- for speeds above 1Mbit/s step is 1000kbit/srw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.38.5.1.3 |
msanCpeTrafficFlowCntrlModeFlow control mode. When enable(1) and speed is to be exceeded, device will send
PAUSE flow control packet. If disable(2) packet will be just dropped.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.5.1.4 |
msanCpeTrafficRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].
Setting this object to active(1) will activate this entry, if msanCpeTrafficName is defined.
Setting this object to destroy(6) will remove this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.38.5.1.5 |
msanCpeTrafficProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanAclProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.5.1.6 |
msanCpeTrafficStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.5.1.7 |
msanCpeServiceTableDescription. SEQUENCE OF MsanCpeServiceEntry .1.3.6.1.4.1.1332.1.1.5.3.38.6 |
msanCpeServiceEntryDescription. MsanCpeServiceEntry .1.3.6.1.4.1.1332.1.1.5.3.38.6.1 |
msanCpeServiceIdNumber identifying service configuration (0 .. n). Integer32 .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.1 |
msanCpeServiceNameName identifying service. Must be unique value.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.2 |
msanCpeServiceCVlanIdCustomer VLAN ID, used for all frames belong to this service.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.3 |
msanCpeServiceCCosCoS bit settings for all frames belonging to this service.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.4 |
msanCpeServiceTrafficIdReference to parameter msanCpeTrafficId (1 .. n), which identifies traffic configuration .
Value 0 is used when traffic configuration is not defined.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.5 |
msanCpeServiceUntaggedPortsThe set of ports (bitmask) which should transmit egress packets as untagged.
When untagged frame is received on this ports set, appropriate default VLAN ID
(msanCpeIntfPortPvid) and default CoS bits (msanCpeIntfPortCos) are set.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.6 |
msanCpeServiceTaggedPortsThe set of ports (bitmask) where frames can be received only if they have
appropriate Customer VLAN ID (msanCpeServiceCVlanId). Otherwise they are dropped.
When transmitting frames to this set of ports, VLAN tags are not removed.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.7 |
msanCpeServiceCMltcstModeMode of multicast operation for this service.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.8 |
msanCpeServiceRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].
Setting this object to active(1) will activate this entry, if msanCpeServiceName
and msanCpeServiceTrafficId are defined.
Setting this object to destroy(6) will remove this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.9 |
msanCpeServiceTypeNameUsage name of CPE model.
Must be one of predefined msanCpeTypeName values.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.10 |
msanCpeServiceProtectionIf protection flag is set to protected (1), other profile values cannot be edited.
Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic:
msanAclProfileStatus = dynamic(2)rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.11 |
msanCpeServiceStatusProfile status.
If status is dynamic, profile values can't be edited.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.38.6.1.12 |
msanCpeIntfServiceTableThis table links CPE ports on selected interface with appropriate service. SEQUENCE OF MsanCpeIntfServiceEntry .1.3.6.1.4.1.1332.1.1.5.3.38.7 |
msanCpeIntfServiceEntryDescription. MsanCpeIntfServiceEntry .1.3.6.1.4.1.1332.1.1.5.3.38.7.1 |
msanCpeIntfServiceRowStatusThe row status object controls the creation/deletion of rows in this table.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.38.7.1.1 |
msanBoard OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.39 |
msanBoardGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.39.1 |
msanBoardResetReset board in specified shelf slot ID (>0).rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.39.1.1 |
msanBoardConfTableDescription. SEQUENCE OF MsanBoardConfEntry .1.3.6.1.4.1.1332.1.1.5.3.39.2 |
msanBoardConfEntryDescription. MsanBoardConfEntry .1.3.6.1.4.1.1332.1.1.5.3.39.2.1 |
msanBoardConfNrUnique identification of a board. INTEGER .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.1 |
msanBoardConfParentNrUnique identification of a parent board.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.2 |
msanBoardConfPositionPosition of the board on the parent board.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.3 |
msanBoardConfTypeType of physical board (e.g. IDC, SGO, SFA, ...). This value is automatically
set according to msanBoardConfRequiredId.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.4 |
msanBoardConfRequiredIdRequired identification of a board, which is one of available msanBoardListId
values (e.g. UTA6041BA).rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.5 |
msanBoardConfActualIdActual identification of a board (e.g. UTA6041BA050 - last three numbers define board version).ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.6 |
msanBoardConfSerialNrSerial number of a board.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.7 |
msanBoardConfDescriptionDescription of the board.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.8 |
msanBoardConfStatusPhysical status of configured board.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.9 |
msanBoardConfRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
For row activation use active(1).
For row deactivation use notInService(2).
For row deletion use destroy(6) (board with management interface can not be deleted).
Other values are currently not supported.
For row activation next terms must be accomplished:
- all requested values (they don't have default definition) must be set
- msanBoardConfId is one of available msanBoardListId valuesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.10 |
msanBoardConfSwSteerVersionThe unique steer code of installed software.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.11 |
msanBoardConfSwBuildDirectoryThe directory where installed software was build on.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.12 |
msanBoardConfSwBuildTimeThe time when the installed software was built. (DateAndTime textual convention, from SNMPv2-TC)ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.13 |
msanBoardConfSwBranchThe repository branch where the installed software was built from.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.14 |
msanBoardConfSwBuildReferenceThe repository reference number of the installed software build branch.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.2.1.15 |
msanBoardListTableDescription. SEQUENCE OF MsanBoardListEntry .1.3.6.1.4.1.1332.1.1.5.3.39.3 |
msanBoardListEntryDescription. MsanBoardListEntry .1.3.6.1.4.1.1332.1.1.5.3.39.3.1 |
msanBoardListIdIdentification of supported board (e.g. UTA6041BA).ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.3.1.1 |
msanBoardListTypeType of physical board (e.g. IDC, SGO, SFA, ...).ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.39.3.1.2 |
msanFtpServer OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.40 |
msanFtpServerGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.40.1 |
msanFtpServerAdminStateFTP server administrative state.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.40.1.1 |
msanAppRateLimit OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.41 |
msanAppRateLimitGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.41.1 |
msanAppRateLimitTableDescription. SEQUENCE OF MsanAppRateLimitEntry .1.3.6.1.4.1.1332.1.1.5.3.41.2 |
msanAppRateLimitEntryDescription. MsanAppRateLimitEntry .1.3.6.1.4.1.1332.1.1.5.3.41.2.1 |
msanAppRateLimitDhcpMaximum number of received DHCP packets in one second (pps) per interface.
Value 0 defines there is no limit.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.41.2.1.1 |
msanAppRateLimitDhcpStateAdministrative state of DHCP traffic rate limiting.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.41.2.1.2 |
msanAppRateLimitPppoeMaximum number of received PPPoE packets in one second (pps) per interface.
Value 0 defines there is no limit.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.41.2.1.3 |
msanAppRateLimitPppoeStateAdministrative state of PPPoE traffic rate limiting.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.41.2.1.4 |
msanAppRateLimitIgmpMaximum number of received DHCP packets in one second (pps) per interface.
Value 0 defines there is no limit.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.41.2.1.5 |
msanAppRateLimitIgmpStateAdministrative state of IGMP traffic rate limiting.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.41.2.1.6 |
msanAppRateLimitStpMaximum number of received STP packets in one second (pps) per interface.
Value 0 defines there is no limit.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.41.2.1.7 |
msanAppRateLimitStpStateAdministrative state of STP traffic rate limiting.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.41.2.1.8 |
msanAppRateLimitMnMaximum number of received MN packets (management traffic) in one second (pps) per interface.
Value 0 defines there is no limit.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.41.2.1.9 |
msanAppRateLimitMnStateAdministrative state of MN traffic rate limiting.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.41.2.1.10 |
msanMlinec OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.50 |
msanMlinecGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.50.1 |
msanMlinecAdminStateMLINEC (Multi-Link Network Connectivity) administrative state.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.50.1.1 |
msanMulticast OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.100 |
msanMulticastGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.100.1 |
msanMulticastIntfStaticGroupTableThe table attaches static multicast groups to the interfaces.deprecated SEQUENCE OF MsanMulticastIntfStaticGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.2 |
msanMulticastIntfStaticGroupEntryDescription.deprecated MsanMulticastIntfStaticGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.2.1 |
msanMulticastIntfStaticGroupIPAddrIP multicast address of valid multicast group.deprecated IpAddress .1.3.6.1.4.1.1332.1.1.5.3.100.2.1.1 |
msanMulticastIntfStaticGroupRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.2.1.2 |
msanMulticastGroupTableDescription. SEQUENCE OF MsanMulticastGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.3 |
msanMulticastGroupEntryDescription. MsanMulticastGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.3.1 |
msanMulticastGroupIpAddrIP multicast address of valid multicast group. IpAddress .1.3.6.1.4.1.1332.1.1.5.3.100.3.1.1 |
msanMulticastGroupNameName of multicast group.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.100.3.1.2 |
msanMulticastGroupRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.3.1.3 |
msanMulticastAclListTableThe table below assigns the symbolic names to the specific multicast ACLs.deprecated SEQUENCE OF MsanMulticastAclListEntry .1.3.6.1.4.1.1332.1.1.5.3.100.4 |
msanMulticastAclListEntryDescription.deprecated MsanMulticastAclListEntry .1.3.6.1.4.1.1332.1.1.5.3.100.4.1 |
msanMulticastAclListIdMulticast List id. Integer from 0 to 255.deprecated INTEGER .1.3.6.1.4.1.1332.1.1.5.3.100.4.1.1 |
msanMulticastAclListNameACL list symbolic name. Should be unique.rwdeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.1332.1.1.5.3.100.4.1.2 |
msanMulticastAclListRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.4.1.3 |
msanMulticastAclListGroupTableThe table below links the multicast groups to the ACL.deprecated SEQUENCE OF MsanMulticastAclListGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.5 |
msanMulticastAclListGroupEntryDescription.deprecated MsanMulticastAclListGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.5.1 |
msanMulticastAclGroupIpAddrIP multicast address of valid ACL multicast group.deprecated IpAddress .1.3.6.1.4.1.1332.1.1.5.3.100.5.1.1 |
msanMulticastAclListGroupRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.5.1.2 |
msanMulticastAclIntfListTableThe table below assigns the multicast ACL to the interfacesdeprecated SEQUENCE OF MsanMulticastAclIntfListEntry .1.3.6.1.4.1.1332.1.1.5.3.100.6 |
msanMulticastAclIntfListEntryDescription.deprecated MsanMulticastAclIntfListEntry .1.3.6.1.4.1.1332.1.1.5.3.100.6.1 |
msanMulticastAclIntfListModeDefines the mode in which interface for specified ACL list works.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.100.6.1.1 |
msanMulticastAclIntfListRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.6.1.2 |
msanMulticastAclListVlanGroupTableThe table below links the multicast groups to the ACL.deprecated SEQUENCE OF MsanMulticastAclListVlanGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.7 |
msanMulticastAclListVlanGroupEntryDescription.deprecated MsanMulticastAclListVlanGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.7.1 |
msanMulticastAclListVlanGroupIpAddrIP multicast address of valid ACL multicast group.deprecated IpAddress .1.3.6.1.4.1.1332.1.1.5.3.100.7.1.1 |
msanMulticastAclListVlanGroupRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.7.1.2 |
msanMulticastIntfVlanStaticGroupTableDescription. SEQUENCE OF MsanMulticastIntfVlanStaticGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.8 |
msanMulticastIntfVlanStaticGroupEntryDescription. MsanMulticastIntfVlanStaticGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.8.1 |
msanMulticastIntfVlanStaticGroupIpAddrIP multicast address of valid multicast group. IpAddress .1.3.6.1.4.1.1332.1.1.5.3.100.8.1.1 |
msanMulticastIntfVlanStaticGroupRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.8.1.2 |
msanMulticastAccessListTableThe table below assigns the symbolic names to the specific multicast ACLs. SEQUENCE OF MsanMulticastAccessListEntry .1.3.6.1.4.1.1332.1.1.5.3.100.9 |
msanMulticastAccessListEntryDescription. MsanMulticastAccessListEntry .1.3.6.1.4.1.1332.1.1.5.3.100.9.1 |
msanMulticastAccessListNameACL list symbolic name. Should be unique. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.100.9.1.1 |
msanMulticastAccessListRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndGo(4).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.9.1.2 |
msanMulticastAccessListGroupTableThe table below links the multicast addresses to the ACL list SEQUENCE OF MsanMulticastAccessListGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.10 |
msanMulticastAccessListGroupEntryDescription. MsanMulticastAccessListGroupEntry .1.3.6.1.4.1.1332.1.1.5.3.100.10.1 |
msanMulticastAccessListGroupIpAddrIP multicast address of valid ACL multicast group. IpAddress .1.3.6.1.4.1.1332.1.1.5.3.100.10.1.1 |
msanMulticastAccessListGroupRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.10.1.2 |
msanMulticastAccessListIntfTableThe table below assigns the multicast ACL list to the interfaces SEQUENCE OF MsanMulticastAccessListIntfEntry .1.3.6.1.4.1.1332.1.1.5.3.100.11 |
msanMulticastAccessListIntfEntryDescription. MsanMulticastAccessListIntfEntry .1.3.6.1.4.1.1332.1.1.5.3.100.11.1 |
msanMulticastAccessListIntfModeDefines the mode in which interface for specified ACL list works.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.100.11.1.1 |
msanMulticastAccessListIntfRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.11.1.2 |
msanSwitchMFDBTableThe Multicast Forwarding Database table SEQUENCE OF MsanSwitchMFDBEntry .1.3.6.1.4.1.1332.1.1.5.3.100.12 |
msanSwitchMFDBEntryContains Forwarding and Filtering information per Component User, Vlan Index, and MAC Address. MsanSwitchMFDBEntry .1.3.6.1.4.1.1332.1.1.5.3.100.12.1 |
msanSwitchMFDBProtocolTypeThe component that is responsible for this entry in the Multicast
Forwarding Database.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.100.12.1.1 |
msanSwitchMFDBVlanIdVlan Index for which this entry is associated with.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.1332.1.1.5.3.100.12.1.2 |
msanSwitchMFDBMacAddressA multicast MAC address for which the switch has forwarding and or
filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.12.1.3 |
msanSwitchMFDBTypeThis displays the type of the entry.
static(1) - Entries configured by the end user
dynamic(2) - Entries added as a result of a learning process or protocolro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.100.12.1.4 |
msanSwitchMFDBDescriptionText description of this multicast table entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.100.12.1.5 |
msanSwitchMFDBForwardingPortMaskBitMask indicating which ports this entry indicates should be forwarded.
To obtain port numbers from interface numbers, use the objects
agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable
table.ro PortMask .1.3.6.1.4.1.1332.1.1.5.3.100.12.1.6 |
msanSwitchMFDBFilteringPortMaskBitMask indicating which ports this entry indicates should be filtered.
To obtain port numbers from interface numbers, use the objects
agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable
table.ro PortMask .1.3.6.1.4.1.1332.1.1.5.3.100.12.1.7 |
msanFiltering OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.101 |
msanFilteringGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.101.2 |
msanFilteringFilterTableDefines a list of filters.deprecated SEQUENCE OF MsanFilteringFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.101.3 |
msanFilteringFilterEntryDescription.deprecated MsanFilteringFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.101.3.1 |
msanFilteringFilterIdFilter identity.rwdeprecated Integer32 (1..64 | 301..500) .1.3.6.1.4.1.1332.1.1.5.3.101.3.1.1 |
msanFilteringFilterNameName of filter to be shown.rwdeprecated OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.101.3.1.2 |
msanFilteringFilterTypeType of filter (static or dynamic).rodeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.101.3.1.3 |
msanFilteringFilterRowStatusSNMP row status.
Supported values:
active(1) - valid entry;
createAndGo(4) - used to create a new entry;
destroy(6) - removes the entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.101.3.1.4 |
msanFilteringAssignFilterTableThis table defines a list of filters assigned to interface.deprecated SEQUENCE OF MsanFilteringAssignFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.101.4 |
msanFilteringAssignFilterEntryDescription.deprecated MsanFilteringAssignFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.101.4.1 |
msanFilteringAssignFilterVidID of VLAN to be filtered.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.101.4.1.1 |
msanFilteringAssignFilterCosCoS value to be filtered.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.101.4.1.2 |
msanFilteringAssignFilterDscpDSCP field.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.101.4.1.3 |
msanFilteringAssignFilterPrecPrecedence in DSCP tag.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.101.4.1.4 |
msanFilteringAssignFilterRowStatusSNMP row status.
Supported values:
active(1) - valid entry;
createAndGo(4) - used to create a new entry;
destroy(6) - removes the entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.101.4.1.5 |
msanFilteringRuleTableThis table defines a list of filtering rules associated to filters.deprecated SEQUENCE OF MsanFilteringRuleEntry .1.3.6.1.4.1.1332.1.1.5.3.101.5 |
msanFilteringRuleEntryDescription.deprecated MsanFilteringRuleEntry .1.3.6.1.4.1.1332.1.1.5.3.101.5.1 |
msanFilteringRuleIdFiltering rule identity.rodeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.1 |
msanFilteringRuleResponseFilter response.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.2 |
msanFilteringRuleFromMacSource Ethernet address.rwdeprecated MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.3 |
msanFilteringRuleFromMacMaskSource Ethernet address mask.rwdeprecated MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.4 |
msanFilteringRuleFromIpSource IP address.rwdeprecated IpAddress .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.5 |
msanFilteringRuleFromMaskSource IP address mask.rwdeprecated IpAddress .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.6 |
msanFilteringRuleFromPortLowThe lowest number of a source TCP or UDP port.rwdeprecated Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.7 |
msanFilteringRuleFromPortHighThe highest number of a source TCP or UDP port..rwdeprecated Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.8 |
msanFilteringRuleToMacDestination Ethernet address.rwdeprecated MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.9 |
msanFilteringRuleToMacMaskDestination Ethernet address mask.rwdeprecated MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.10 |
msanFilteringRuleToIpDestination IP address.rwdeprecated IpAddress .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.11 |
msanFilteringRuleToMaskDestination IP address mask.rwdeprecated IpAddress .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.12 |
msanFilteringRuleToPortLowThe lowest number of a destination TCP or UDP port.rwdeprecated Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.13 |
msanFilteringRuleToPortHighThe highest number of a destination TCP or UDP port.rwdeprecated Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.14 |
msanFilteringRuleEtherProtoEthernet protocol to be filtered.rwdeprecated OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.15 |
msanFilteringRuleIpProtoIP protocol to be filtered.rwdeprecated OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.16 |
msanFilteringRuleIcmTypeICMP type. ICMP sends an error message to the transmitter of IP packets and provides
information at IP packet processing.rwdeprecated Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.17 |
msanFilteringRulePrecPrecedence in DSCP tag.rwdeprecated Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.18 |
msanFilteringRuleTosTOS to be filtered.rwdeprecated Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.19 |
msanFilteringRuleVidID of VLAN to be filtered.rwdeprecated Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.20 |
msanFilteringRuleCosCoS value to be filtered.rwdeprecated Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.21 |
msanFilteringRuleTag802.1Q tag.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.22 |
msanFilteringRuleRowStatusSNMP row status.
Supported values:
active(1) - valid entry;
createAndGo(4) - used to create a new entry;
destroy(6) - removes the entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.101.5.1.23 |
msanFilteringAttachedFilterTableThis table defines information about filters attached to interface.deprecated SEQUENCE OF MsanFilteringAttachedFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.101.6 |
msanFilteringAttachedFilterEntryDescription.deprecated MsanFilteringAttachedFilterEntry .1.3.6.1.4.1.1332.1.1.5.3.101.6.1 |
msanFilteringAttachedFilterDirectPoint of attaching a filter.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.101.6.1.1 |
msanFilteringAttachedFilterRowStatusSNMP row status.
Supported values:
active(1) - valid entry;
createAndGo(4) - used to create a new entry;
destroy(6) - removes the entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.101.6.1.2 |
msanBridge OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.102 |
msanBridgeGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.102.1 |
msanBridgeModeA bridge operating mode.
bridge(1)
ccx(2)rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.102.1.1 |
msanBridgeMacTableSizeThe maximum MAC table sizerwdeprecated INTEGER .1.3.6.1.4.1.1332.1.1.5.3.102.1.2 |
msanBridgeRedAdminModeEnable or disable Random Early Discard functionality.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.102.1.3 |
msanBridgeCCXTableThe table contents the information about all CCX pairs.deprecated SEQUENCE OF MsanBridgeCCXEntry .1.3.6.1.4.1.1332.1.1.5.3.102.2 |
msanBridgeCCXEntryDescription.deprecated MsanBridgeCCXEntry .1.3.6.1.4.1.1332.1.1.5.3.102.2.1 |
msanBridgeCCXInterface1The first interface to make cross-connection exchangerwdeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1332.1.1.5.3.102.2.1.1 |
msanBridgeCCXInterface2The second interface to make cross-connection exchangerwdeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1332.1.1.5.3.102.2.1.2 |
msanBridgeCCXRowStatusThe row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.102.2.1.3 |
msanIPSG OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.103 |
msanIPSGGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.103.1 |
msanIPSGAdminModeEnable/disable IPv4 source guard for all interfacesrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.103.1.1 |
msanIPSGStoreAdminModeEnable/disable storing of the IP-MAC binds to the interoperation table.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.103.1.2 |
msanIPSGIpv6AdminModeEnable/disable IPv6 source guard for all interfacesrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.103.1.3 |
msanIPSGClearDynamicBindsClear IPSG snooping tables for all ports.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.103.1.4 |
msanIPSGIntfTableDescription. SEQUENCE OF MsanIPSGIntfEntry .1.3.6.1.4.1.1332.1.1.5.3.103.2 |
msanIPSGIntfEntryDescription. MsanIPSGIntfEntry .1.3.6.1.4.1.1332.1.1.5.3.103.2.1 |
msanIPSGIntfAdminModeEnable/disable IP Source Guard for the selected interface.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.103.2.1.1 |
msanIPSGIntfBindsLimitIPSG binding limit for DHCPv4 snooping table per interface.
Value 0 defines there is no limit.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.103.2.1.2 |
msanIPSGIntfFilteringModeSets the traffic filtering type. Traffic can be filtered either by IP or by both IP and MAC address.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.103.2.1.3 |
msanIPSGIntfIpv6AdminModeEnable/disable IPv6 Source Guard for the selected interface.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.103.2.1.4 |
msanIPSGIntfBindsLimitDhcpv6IPSG binding limit for DHCPv6 (IPv6 DHCP)snooping table per interface.
Value 0 defines there is no limit.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.103.2.1.5 |
msanIPSGIntfBindsLimitNDIPSG binding limit for ND (IPv6 Neighbor Discovery) snooping table per interface
Value 0 defines there is no limit.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.103.2.1.6 |
msanIPSGIntfClearDynamicBindsClear IPSG snooping tables per interfacerw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.103.2.1.7 |
msanIPSGBindingsTableDThe table for storing IP source bindingdeprecated SEQUENCE OF MsanIPSGBindingsEntry .1.3.6.1.4.1.1332.1.1.5.3.103.3 |
msanIPSGBindingsEntryDescription.deprecated MsanIPSGBindingsEntry .1.3.6.1.4.1.1332.1.1.5.3.103.3.1 |
msanIPSGBindIpAllowed IP addressrwdeprecated IpAddress .1.3.6.1.4.1.1332.1.1.5.3.103.3.1.1 |
msanIPSGBindVlanAllowed VLAN numberrodeprecated VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.1332.1.1.5.3.103.3.1.2 |
msanIPSGBindMacAllowed MAC addressrodeprecated MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.103.3.1.3 |
msanIPSGBindLeaseRemainingTimeThe period for which the DHCP lease is valid.
It is displayed in days, hours, minutes, and seconds.
For static IPSG bindings this value is set to 0 (infinitive).rodeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1332.1.1.5.3.103.3.1.4 |
msanIPSGBindTypeType of IPSG binding.rodeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.103.3.1.5 |
msanIPSGBindMatchedFramesNumber of matched frames for selected IPSG binding.rodeprecated Counter32 .1.3.6.1.4.1.1332.1.1.5.3.103.3.1.6 |
msanIPSGBindRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.
For row activation next terms must be accomplished:
- msanIPSGBindIp must be definedrwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.103.3.1.7 |
msanIPSGIpv4PortStaticBindTableDescription. SEQUENCE OF MsanIPSGIpv4PortStaticBindEntry .1.3.6.1.4.1.1332.1.1.5.3.103.4 |
msanIPSGIpv4PortStaticBindEntryDescription. MsanIPSGIpv4PortStaticBindEntry .1.3.6.1.4.1.1332.1.1.5.3.103.4.1 |
msanIPSGIpv4PortStaticBindMacAddressAllowed MAC address MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.103.4.1.1 |
msanIPSGIpv4PortStaticBindVlanIdAllowed VLAN number VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.1332.1.1.5.3.103.4.1.2 |
msanIPSGIpv4PortStaticBindIpAddressAllowed IPv4 address InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.103.4.1.3 |
msanIPSGIpv4PortStaticBindMatchedFramesNumber of matched frames for selected IPSG binding.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.103.4.1.4 |
msanIPSGIpv4PortStaticBindRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndGo(4).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.103.4.1.5 |
msanIPSGIpv6PortStaticBindTableDescription. SEQUENCE OF MsanIPSGIpv6PortStaticBindEntry .1.3.6.1.4.1.1332.1.1.5.3.103.5 |
msanIPSGIpv6PortStaticBindEntryDescription. MsanIPSGIpv6PortStaticBindEntry .1.3.6.1.4.1.1332.1.1.5.3.103.5.1 |
msanIPSGIpv6PortStaticBindMacAddressAllowed MAC address MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.103.5.1.1 |
msanIPSGIpv6PortStaticBindVlanIdAllowed VLAN number VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.1332.1.1.5.3.103.5.1.2 |
msanIPSGIpv6PortStaticBindIpAddressAllowed IPv6 address InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.103.5.1.3 |
msanIPSGIpv6PortStaticBindMatchedFramesNumber of matched frames for selected IPSG binding.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.103.5.1.4 |
msanIPSGIpv6PortStaticBindRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndGo(4).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.103.5.1.5 |
msanIPSGPortBindCurrentTableDThe table for storing IP source binding SEQUENCE OF MsanIPSGPortBindCurrentEntry .1.3.6.1.4.1.1332.1.1.5.3.103.6 |
msanIPSGPortBindCurrentEntryDescription. MsanIPSGPortBindCurrentEntry .1.3.6.1.4.1.1332.1.1.5.3.103.6.1 |
msanIPSGPortBindCurrentIdTable index. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.103.6.1.1 |
msanIPSGPortBindCurrentIfIndexPort index (ifIndex value).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1332.1.1.5.3.103.6.1.2 |
msanIPSGPortBindCurrentMacAddressAllowed MAC addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.103.6.1.3 |
msanIPSGPortBindCurrentVlanIdAllowed VLAN numberro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.1332.1.1.5.3.103.6.1.4 |
msanIPSGPortBindCurrentIpAddressTypeSpecifies the type of ip address: ipv4[1], ipv6[2].ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.103.6.1.5 |
msanIPSGPortBindCurrentIpAddressAllowed IP addressro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1332.1.1.5.3.103.6.1.6 |
msanIPSGPortBindCurrentLeaseRemainingTimeThe period for which the DHCP lease is valid.
It is displayed in days, hours, minutes, and seconds.
For static IPSG bindings this value is set to 0 (infinitive).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1332.1.1.5.3.103.6.1.7 |
msanIPSGPortBindCurrentTypeType of IPSG binding.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.103.6.1.8 |
msanIPSGPortBindCurrentMatchedFramesNumber of matched frames for selected IPSG binding.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.103.6.1.9 |
msanVlan OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.105 |
msanVlanGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.105.1 |
msanDVlanTagModeControls the Double Vlan Tag mode on the system.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.105.1.1 |
msanVlanRemarkAdminStateGlobal VLAN Remarking administrative state.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.105.1.2 |
msanInternalVlanIdInternal Vlan ID.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.105.1.3 |
msanPortVlanTableVlan config parameters per port.deprecated SEQUENCE OF MsanPortVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.105.2 |
msanPortVlanEntryDescription.deprecated MsanPortVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.105.2.1 |
msanPortVlanModeInterface vlan mode.rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.105.2.1.1 |
msanPortVlanStackPriorityPriority of inner tag when interface is in vlanStacking mode (msanPortVlanMode=vlanStacking).rwdeprecated Enumeration .1.3.6.1.4.1.1332.1.1.5.3.105.2.1.2 |
msanPortVlanStackVlanIdVlan ID of inner tag when interface is in vlanStacking mode (msanPortVlanMode=vlanStacking).rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.105.2.1.3 |
msanPortDVlanMapTableIngress mapping of inner VID to outer VID different from default
(PVID) mapping.deprecated SEQUENCE OF MsanPortDVlanMapEntry .1.3.6.1.4.1.1332.1.1.5.3.105.3 |
msanPortDVlanMapEntryDescription.deprecated MsanPortDVlanMapEntry .1.3.6.1.4.1.1332.1.1.5.3.105.3.1 |
msanPortDVlanMapInTagVlanIdInner tag VLAN ID. DVlan functionality is used when interface is in dot1qtunnel mode.deprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.105.3.1.1 |
msanPortDVlanMapOutTagVlanIdOuter tag VLAN ID added for inner tag VLAN ID (msanPortDVlanMapInTagVlanId).
DVlan functionality is used when interface is in dot1qtunnel mode.
Value of -1 indicates that outer tag is not added for selected inner tag VLAN ID.rwdeprecated Integer32 .1.3.6.1.4.1.1332.1.1.5.3.105.3.1.2 |
msanPortDVlanMapRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].
Setting this object to active(1) will activate this entry.
Setting this object to destroy(6) will remove this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.105.3.1.3 |
msanPortVlanRemarkTableVlan remarking table for ingress traffic (per port).
Note: All defined Vlan remarking rules for ingress traffic also add , automatically,
reverse Vlan remarking rule for egress traffic on same port. SEQUENCE OF MsanPortVlanRemarkEntry .1.3.6.1.4.1.1332.1.1.5.3.105.4 |
msanPortVlanRemarkEntryDescription. MsanPortVlanRemarkEntry .1.3.6.1.4.1.1332.1.1.5.3.105.4.1 |
msanPortVlanRemarkSrcVlanIdIngress traffic Source VLAN ID which will be changed to Destination VLAN ID
(msanPortVlanRemarkDstVlanId) by VLAN remarking rule.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.105.4.1.1 |
msanPortVlanRemarkDstVlanIdDestination VLAN ID to which will be changed Source VLAN ID of ingress traffic (msanPortVlanRemarkSrcVlanId)
by VLAN remarking rule.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.105.4.1.2 |
msanPortVlanRemarkRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.
For row activation next terms must be accomplished:
- msanPortVlanRemarkDstVlanId must be defined (default value not defined)
Note: All defined Vlan remarking rules for ingress traffic also add , automatically,
reverse Vlan remarking rule for egress traffic on same port.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.105.4.1.3 |
msanPortDVlanTableDescription. SEQUENCE OF MsanPortDVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.105.5 |
msanPortDVlanEntryDescription. MsanPortDVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.105.5.1 |
msanPortDVlanTagModeAdministrative state of 802.1Q tunneling (DVLAN) mode.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.105.5.1.1 |
msanPortDVlanStackVlanIdVlan ID of inner tag when interface is in vlanStacking mode.
Interface is in vlanStacking mode when msanPortDVlanTagMode=enable and
msanPortDVlanStackVlanId>=0.
msanPortDVlanStackVlanId value of -1 indicates that vlanStacking mode is not activated.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.105.5.1.2 |
msanPortDVlanStackPriorityPriority of inner tag when interface is in vlanStacking mode.
Interface is in vlanStacking mode when msanPortDVlanTagMode=enable and
msanPortDVlanStackVlanId>=0.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.105.5.1.3 |
msanPortDVlanConfigTableIngress mapping of inner VID to outer VID different from default
(PVID) mapping. SEQUENCE OF MsanPortDVlanConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.105.6 |
msanPortDVlanConfigEntryDescription. MsanPortDVlanConfigEntry .1.3.6.1.4.1.1332.1.1.5.3.105.6.1 |
msanDVlanConfigInTagVlanIdInner tag VLAN ID. DVlan functionality is used when interface is in dot1qtunnel mode. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.105.6.1.1 |
msanDVlanConfigInTagPriorityPriority of inner tag.
Value unspecified(8) defines that rule line applies to all packets with
appropriate msanDVlanConfigInTagVlanId, except if packet match to other more specific rule. Enumeration .1.3.6.1.4.1.1332.1.1.5.3.105.6.1.2 |
msanDVlanConfigOutTagVlanIdOuter tag VLAN ID added for inner tag VLAN ID (msanPortDVlanConfigInTagVlanId).
DVlan functionality is used when interface is in dot1qtunnel mode.
Value of -1 indicates that outer tag is not added for selected inner tag VLAN ID.rw Integer32 .1.3.6.1.4.1.1332.1.1.5.3.105.6.1.3 |
msanDVlanConfigOutTagPriorityPriority of outer tag.
Value unspecified(8) defines that msanDVlanMapInTagPriority is copied to outer tag.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.105.6.1.4 |
msanDVlanConfigRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].
Setting this object to active(1) will activate this entry.
Setting this object to destroy(6) will remove this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.105.6.1.5 |
msanPortVlanRemarkAdminTableDescription. SEQUENCE OF MsanPortVlanRemarkAdminEntry .1.3.6.1.4.1.1332.1.1.5.3.105.7 |
msanPortVlanRemarkAdminEntryDescription. MsanPortVlanRemarkAdminEntry .1.3.6.1.4.1.1332.1.1.5.3.105.7.1 |
msanPortVlanRemarkAdminModeAdministrative mode for VLAN Remarkingrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.105.7.1.1 |
msanAtm OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.106 |
msanAtmGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.106.1 |
msanPortAtmPvcTableDescription. SEQUENCE OF MsanPortAtmPvcEntry .1.3.6.1.4.1.1332.1.1.5.3.106.2 |
msanPortAtmPvcEntryDescription. MsanPortAtmPvcEntry .1.3.6.1.4.1.1332.1.1.5.3.106.2.1 |
msanPortAtmPvcVpiATM-PVC(Permanent Virtual Circuits) VPI(Virtual Path Identifier) value. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.106.2.1.1 |
msanPortAtmPvcVciATM-PVC(Permanent Virtual Circuits) VCI(Virtual Channel Identifier) value. Integer32 .1.3.6.1.4.1.1332.1.1.5.3.106.2.1.2 |
msanPortAtmPvcPvidThe PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this ATM-PVC(Permanent Virtual Circuits).
Value 0 defines that PVID is not set.rw INTEGER .1.3.6.1.4.1.1332.1.1.5.3.106.2.1.3 |
msanPortAtmPvcRowStatusThe row status object controls the creation/deletion of rows in this table.
For row creation use createAndWait(5) [createAndGo(4) is not supported].
Setting this object to active(1) will activate this entry.
Setting this object to destroy(6) will remove this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.106.2.1.4 |
msanEnergyMeter OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.107 |
msanEnergyMeterGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.107.1 |
msanEnergyMeterIpAddressEnergy meter's Ip address.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.107.1.1 |
msanEnergyMeterTcpPortEnergy meter's Tcp port.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.107.1.2 |
msanEnergyMeterAddressEnergy meter's address.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.107.1.3 |
msanEnergyMeterPasswordEnergy meter's password.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.107.1.4 |
msanEnergyMeterSerialNoEnergy meter's serial number.ro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.107.1.5 |
msanEnergyMeterDateTimeEnergy meter's date and time in format:
year-month-day, hour:minutes:secondsro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.107.1.6 |
msanEnergyMeterCurrTariffEnergy meter's current active tariff.ro Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.107.1.7 |
msanEnergyMeterCurrPowerEnergy meter's current measured power.ro Unsigned32 UNITS "0.01 kW" .1.3.6.1.4.1.1332.1.1.5.3.107.1.8 |
msanEnergyMeterCoreVersionEnergy meter's current version number.ro Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.107.1.9 |
msanEnergyMeterFwTypeEnergy meter's current firmware type.ro Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.107.1.10 |
msanEnergyMeterFwVersionEnergy meter's current firmware version.ro Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.107.1.11 |
msanEnergyMeterFwCreationDateEnergy meter's current firmware creation date in format:
year-month-dayro OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.107.1.12 |
msanEnergyMeterEnergyTableEnergy values. SEQUENCE OF MsanEnergyMeterEnergyEntry .1.3.6.1.4.1.1332.1.1.5.3.107.2 |
msanEnergyMeterEnergyEntryDescription. MsanEnergyMeterEnergyEntry .1.3.6.1.4.1.1332.1.1.5.3.107.2.1 |
msanEnergyMeterTariffThis is msanEnergyMeterTariff index in msanEnergyMeterEnergyTable
Defines tariff. 0 tariff No1, 1 tariff No2, , 7 - tariff No8 Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.107.2.1.1 |
msanEnergyMeterDepthThis is msanEnergyMeterDepth index in msanEnergyMeterEnergyTable.
Defines time span.
0 current value,
1 value at the end of previous month,
2 value at the end of 2. month ago, , 13 value at the end of the 13. month ago Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.107.2.1.2 |
msanEnergyMeterEnergyValueEnergy value.ro Unsigned32 UNITS "0.01 kWh" .1.3.6.1.4.1.1332.1.1.5.3.107.2.1.3 |
msanEnergyMeterEnergySumTableEnergy sum values of all tariffs. SEQUENCE OF MsanEnergyMeterEnergySumEntry .1.3.6.1.4.1.1332.1.1.5.3.107.3 |
msanEnergyMeterEnergySumEntryDescription. MsanEnergyMeterEnergySumEntry .1.3.6.1.4.1.1332.1.1.5.3.107.3.1 |
msanEnergyMeterEnergySumValueEnergy sum value of all tariffsro Unsigned32 UNITS "0.01 kWh" .1.3.6.1.4.1.1332.1.1.5.3.107.3.1.1 |
msanArpInspection OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.108 |
msanArpInspectionGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.108.1 |
msanArpInspectionAdminModeEnable/disable global dynamic arp inspectionrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.108.1.1 |
msanArpInspectionPortTableArp Inspection. SEQUENCE OF MsanArpInspectionPortEntry .1.3.6.1.4.1.1332.1.1.5.3.108.2 |
msanArpInspectionPortEntryDescription. MsanArpInspectionPortEntry .1.3.6.1.4.1.1332.1.1.5.3.108.2.1 |
msanArpInspectionPortAdminModeEnable/disable dynamic arp inspection for the selected interface.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.108.2.1.1 |
msanArpInspectionPortStatDroppedFramesNumber of discarded ARP packets on interface.ro INTEGER .1.3.6.1.4.1.1332.1.1.5.3.108.2.1.2 |
msanArpInspectionVlanTableArp Inspection. SEQUENCE OF MsanArpInspectionVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.108.3 |
msanArpInspectionVlanEntryDescription. MsanArpInspectionVlanEntry .1.3.6.1.4.1.1332.1.1.5.3.108.3.1 |
msanArpInspectionVlanAdminModeEnable/disable dynamic arp inspection per vlan.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.108.3.1.1 |
msanArpInspectionVlanStatDroppedFramesNumber of discarded ARP packets per vlan.ro INTEGER .1.3.6.1.4.1.1332.1.1.5.3.108.3.1.2 |
msanIsa OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.109 |
msanIsaGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.109.1 |
msanIsaTalAdminModeISA TAL functionality global admin mode.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.109.1.1 |
msanIsaDasServerPortISA Radius DAS (Dynamic Authorization Server) port number.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.109.1.2 |
msanIsaDasServerSecretISA Radius DAS (Dynamic Authorization Server) shared secret.rw DisplayString .1.3.6.1.4.1.1332.1.1.5.3.109.1.3 |
msanIsaRadiusServerRetriesMaximum number of retransmissions of a ISA Radius request packet.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.109.1.4 |
msanIsaRadiusServerTimeoutTime out duration (in seconds) before packets are retransmitted to ISA Radius serverrw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.109.1.5 |
msanIsaStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.109.2 |
msanIsaPortStatTableDescription. SEQUENCE OF MsanIsaPortStatEntry .1.3.6.1.4.1.1332.1.1.5.3.109.2.1 |
msanIsaPortStatEntryDescription. MsanIsaPortStatEntry .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1 |
msanIsaPortStatTalMatchedFramesNumber of TAL matched frames.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.1 |
msanIsaPortStatTalDroppedFramesNumber of TAL dropped frames.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.2 |
msanIsaPortStatAuthenReqSentNumber of sent Authentication requests.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.3 |
msanIsaPortStatAuthenReqConfirmedNumber of confirmed Authentication requests.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.4 |
msanIsaPortStatAuthenReqRejectedNumber of rejected Authentication requests.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.6 |
msanIsaPortStatAuthenTimeoutExpiredNumber of expired Authentication timeouts.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.7 |
msanIsaPortStatAuthorReqSentNumber of sent Authorization requests.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.8 |
msanIsaPortStatAuthorReqConfirmedNumber of confirmed Authorization requests.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.9 |
msanIsaPortStatAuthorReqRejectedNumber of rejected Authorization requests.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.10 |
msanIsaPortStatAuthorTimeoutExpiredNumber of expired Authorization timeouts.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.1.1.11 |
msanIsaStatLoginReqCumulative number of Login requests.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.2 |
msanIsaStatLoginUnsuccessfulReqNumber of unsuccessful login requests.ro Counter32 .1.3.6.1.4.1.1332.1.1.5.3.109.2.3 |
msanIsaRadiusServerTableDescription. SEQUENCE OF MsanIsaRadiusServerEntry .1.3.6.1.4.1.1332.1.1.5.3.109.3 |
msanIsaRadiusServerEntryDescription. MsanIsaRadiusServerEntry .1.3.6.1.4.1.1332.1.1.5.3.109.3.1 |
msanIsaRadiusServerIpAddressISA Radius server IP address. IpAddress .1.3.6.1.4.1.1332.1.1.5.3.109.3.1.1 |
msanIsaRadiusServerTypeISA Radius server type. Enumeration .1.3.6.1.4.1.1332.1.1.5.3.109.3.1.2 |
msanIsaRadiusServerPortISA Radius server port number.
If msanIsaRadiusServerType = authentication(1) then default port value is 1812.
If msanIsaRadiusServerType = accounting(2) then default port value is 1813.rw Unsigned32 .1.3.6.1.4.1.1332.1.1.5.3.109.3.1.3 |
msanIsaRadiusServerSecretISA Radius server shared secret.rw DisplayString .1.3.6.1.4.1.1332.1.1.5.3.109.3.1.4 |
msanIsaRadiusServerPrimaryModeISA Radius server primary mode.
Only one server can be defined as primary(1).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.109.3.1.5 |
msanIsaRadiusServerRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.
For row activation parameter msanIsaRadiusServerType must be defined.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.3.1.6 |
msanIsaPortTableDescription. SEQUENCE OF MsanIsaPortEntry .1.3.6.1.4.1.1332.1.1.5.3.109.5 |
msanIsaPortEntryDescription. MsanIsaPortEntry .1.3.6.1.4.1.1332.1.1.5.3.109.5.1 |
msanIsaPortTalAdminModeISA TAL functionality admin mode.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.109.5.1.1 |
msanIsaPortAuthenticationISA Authentication administrative state.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.109.5.1.2 |
msanIsaPortAuthorizationISA Authorization administrative state.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.109.5.1.3 |
msanIsaPortAccountingISA Accounting administrative state.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.109.5.1.4 |
msanIsaPortLoginMaskISA login mask.rw Bits .1.3.6.1.4.1.1332.1.1.5.3.109.5.1.5 |
msanIsaPortLoginUserPatternMaskThis mask value identifies the portion of input packet that
is send to Radius server, if userPattern bit is set in msanIsaPortLoginMask.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.109.5.1.6 |
msanIsaPortTalAutomaticReqTAL automatic request state.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.109.5.1.7 |
msanIsaTalPortMatchTableDescription. SEQUENCE OF MsanIsaTalPortMatchEntry .1.3.6.1.4.1.1332.1.1.5.3.109.6 |
msanIsaTalPortMatchEntryDescription. MsanIsaTalPortMatchEntry .1.3.6.1.4.1.1332.1.1.5.3.109.6.1 |
msanIsaTalPortMatchEthertypeMatch incoming packet frame with specified EtherType value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.1 |
msanIsaTalPortMatchMacSrcAddrMatch incoming packet frame with specified Source MAC address.
Empty string indicates that parameter has not been defined.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.2 |
msanIsaTalPortMatchMacSrcMaskThis mask value identifies the portion of msanIsaTalPortMatchMacSrcAddr that
is compared with input packet.
Empty string indicates that parameter has not been definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.3 |
msanIsaTalPortMatchVlanIdMatch incoming packet frame with specified VLAN ID value (1-4094).
A value of -1 indicates that parameter has not been definedrw Integer32 (-1..4094) .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.4 |
msanIsaTalPortMatchIpSrcAddrMatch incoming packet frame with specified source IP address.
Empty string indicates that parameter has not been defined.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.5 |
msanIsaTalPortMatchIpSrcMaskThis mask value identifies the portion of msanIsaTalPortMatchIpSrcAddr that
is compared with input packet.
Empty string indicates that parameter has not been definedrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.6 |
msanIsaTalPortMatchDhcpTypeMatch incoming packet frame with specified DHCP type value.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.7 |
msanIsaTalPortMatchDhcpOpt60VendorIdMatch incoming packet frame with specified DHCP option 60 vendorId value.
Empty string indicates that parameter has not been defined.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.8 |
msanIsaTalPortMatchDhcpOpt61ClientIdMatch incoming packet frame with specified DHCP option 61 clientId value.
Empty string indicates that parameter has not been defined.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.9 |
msanIsaTalPortMatchDhcpOpt61ClientIdMacAddrMatch incoming packet frame with specified DHCP option 61 MAC address.
Empty string indicates that parameter has not been defined.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.10 |
msanIsaTalPortMatchDhcpOpt82RemoteIdMatch incoming packet frame with specified DHCP option 82 remoteId value.
Empty string indicates that parameter has not been defined.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.11 |
msanIsaTalPortMatchUserBitsMatch incoming packet frame with specified user defined bits.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.12 |
msanIsaTalPortMatchUserMaskThis mask value identifies the portion of msanIsaTalPortMatchUserBits that
is compared with input packet.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.109.6.1.13 |
msanIsaTalPatternMatchTableThis table is used to store the pattern match name, pattern
rules and the corresponding login mask for the pattern match. SEQUENCE OF MsanIsaTalPatternMatchEntry .1.3.6.1.4.1.1332.1.1.5.3.109.7 |
msanIsaTalPatternMatchEntryEach entry in this table contains the
a unique pattern match along with the loginmask to identify the user login packets. MsanIsaTalPatternMatchEntry .1.3.6.1.4.1.1332.1.1.5.3.109.7.1 |
msanIsaTalPatternMatchNamePattern match name. OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.1 |
msanIsaTalPatternMatchEthertypeMatch incoming packet frame with specified EtherType value.
A value of -1 indicates that parameter has not been defined.rw Integer32 (-1..65535) .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.2 |
msanIsaTalPatternMatchMacSrcAddrMatch incoming packet frame with specified Source MAC address.
Empty string indicates that parameter has not been defined.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.3 |
msanIsaTalPatternMatchMacSrcMaskThis mask value identifies the portion of
msanIsaTalPatternMatchMacSrcAddr that is compared with input
packet. Empty string indicates that parameter has not been
definedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.4 |
msanIsaTalPatternMatchVlanIdMatch incoming packet frame with specified VLAN ID value
(1-4094). A value of -1 indicates that parameter has not been
definedrw Integer32 (-1..4094) .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.5 |
msanIsaTalPatternMatchIpSrcAddrMatch incoming packet frame with specified source IP address.
Empty string indicates that parameter has not been defined.rw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.6 |
msanIsaTalPatternMatchIpSrcMaskThis mask value identifies the portion of
msanIsaTalPatternMatchIpSrcAddr that is compared with input
packet. Empty string indicates that parameter has not been
definedrw IpAddress .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.7 |
msanIsaTalPatternMatchDhcpTypeMatch incoming packet frame with specified DHCP type value.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.8 |
msanIsaTalPatternMatchDhcpOpt60VendorIdMatch incoming packet frame with specified DHCP option 60
vendorId value. Empty string indicates that parameter has not
been defined.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.9 |
msanIsaTalPatternMatchDhcpOpt61ClientIdMatch incoming packet frame with specified DHCP option 61
clientId value. Empty string indicates that parameter has not
been defined.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.10 |
msanIsaTalPatternMatchDhcpOpt61ClientIdMacAddrMatch incoming packet frame with specified DHCP option 61 MAC
address. Empty string indicates that parameter has not been
defined.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.11 |
msanIsaTalPatternMatchDhcpOpt82RemoteIdMatch incoming packet frame with specified DHCP option 82
remoteId value. Empty string indicates that parameter has not
been defined.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.12 |
msanIsaTalPatternMatchUserBitsMatch incoming packet frame with specified user defined bits.
Empty string indicates that parameter has not been defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.13 |
msanIsaTalPatternMatchUserMaskThis mask value identifies the portion of
msanIsaTalPatternMatchUserBits that is compared with input
packet. Empty string indicates that parameter has not been
defined.rw OCTET STRING .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.14 |
msanIsaTalPatternMatchLoginMaskLogin mask for the current pattern match. This is used to
generate the UserId.rw Bits .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.15 |
msanIsaTalPatternMatchRowStatusThe row status object controls the creation/deletion of rows
in this table.
Its semantics are the same as those for the RowStatus textual
convention specified for SNMPv2.
A new row is created using createAndWait(5)
[createAndGo(4) is not supported]
The value active(1) activates the entry.
Setting this object to destroy6) will remove this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.7.1.16 |
msanIsaTalPortPatternMatchTableA connection between Pattern Matches and device ports.
An entry is created in this table whenever a pattern match need to be
attached to a downlink port. SEQUENCE OF MsanIsaTalPortPatternMatchEntry .1.3.6.1.4.1.1332.1.1.5.3.109.8 |
msanIsaTalPortPatternMatchEntryEach entry in this table contains the
a unique pattern match on a port along with the loginmask to identify the user login packets. MsanIsaTalPortPatternMatchEntry .1.3.6.1.4.1.1332.1.1.5.3.109.8.1 |
msanIsaTalPortPatternMatchRowStatusThe row status object controls the creation/deletion of rows
in this table.
Its semantics are the same as those for the RowStatus textual
convention specified for SNMPv2.
Setting this object to createAndGo(4) creates a row in this table.
Setting this object to destroy(6) will remove this entry.
Read values: active(1).
Other values are currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.109.8.1.1 |
msanSync OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.110 |
msanSyncGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1332.1.1.5.3.110.1 |
msanSyncTableDescription. SEQUENCE OF MsanSyncEntry .1.3.6.1.4.1.1332.1.1.5.3.110.2 |
msanSyncEntryDescription. MsanSyncEntry .1.3.6.1.4.1.1332.1.1.5.3.110.2.1 |
msanSyncBoardPositionCentral ethernet board position. INTEGER .1.3.6.1.4.1.1332.1.1.5.3.110.2.1.1 |
msanSyncSourcePrioritySynchronization source priority: 1-first priority, 2-second priority..... INTEGER .1.3.6.1.4.1.1332.1.1.5.3.110.2.1.2 |
msanSyncSourceTypeSynchronization source type:
ext-2mhz(4) - synchronization on extended source 2MHz,
ext-10mhz(5) - synchronization on extended source 10MHz,
ext-1hz(6) - synchronization on extended source 1Hz,
mlvds-bp(8) - synchronization on MLVDS,
pps-bp(14) - synchronization on PPS,
ptp-eth(15)- synchronization on PtP Ethernet,
sync-eth(16) - synchronization on Synchronous Ethernet,
free-run(40) - free-run synchronizationrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.110.2.1.3 |
msanSyncSourceIdSynchronization source identity.
msanSyncSourceId can be used when msanSyncSourceType has one of values:
- ext-2mhz(4),
- ext-10mhz(5),
- ext-1hz(6),
- mlvds-bp(8),
- pps-bp(14),
- free-run(40)
msanSyncSourceId can be set only to input-1(1), when msanSyncSourceType
is pps-bp(14) or free-run(40).rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.110.2.1.4 |
msanSyncSourceEthPortIdSynchronization source ethernet Port Id (value of ifIndex).
msanSyncSourceEthPortId can be used, when msanSyncSourceType
has ptp-eth(15) or sync-eth(16) value.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1332.1.1.5.3.110.2.1.5 |
msanSyncDestinationTypeSynchronization destination type:
local(0) - synchronization signal is used only on local board
global(0) - synchronization signal is sent to MLVDS busrw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.110.2.1.6 |
msanSyncDestinationMlvdsIdDestination MLVDS bus Identity.
This parameter is used when msanSyncDestinationType has global(1) value.rw Enumeration .1.3.6.1.4.1.1332.1.1.5.3.110.2.1.7 |
msanSyncSourceSuitabilitySource Suitability.ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.110.2.1.8 |
msanSyncSourceActivitySource Activity .ro Enumeration .1.3.6.1.4.1.1332.1.1.5.3.110.2.1.9 |
msanSyncRowStatusThe row status object controls the creation/deletion of rows in this table.
Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2.
For row creation use createAndWait(5).
For row activation use active(1).
For row deletion use destroy(6).
Other values are currently not supported.
For row activation next terms must be defined
- msanSyncSourceType
- msanSyncSourceMlvdsId or msanSyncSourcePortId
- msanSyncDestionationType
- msanSyncDestionaMlvdsId if msanSyncDestionType=global(10)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1332.1.1.5.3.110.2.1.10 |