Home/Catalog/ISKRATEL-IPMI-MIB

ISKRATEL-IPMI-MIB

AI MIB Summary

The ISKRATEL-IPMI-MIB module facilitates the monitoring and management of IPMI-compliant hardware components within Iskratel networking equipment, exposing critical system metrics such as sensor readings (temperature, voltage, fan speed), chassis status, and IPMI session states via the SNMP protocol.

Description.
Main OID:
msanShMC.1.3.6.1.4.1.1332.1.1.5.3.33
232
Objects
Active
Status
3
Dependencies

Imported Objects

ISKRATEL-MSAN-MIB
RFC1213-MIB
SNMPv2-SMI

Objects

232 total
Object Name
msanShMCDescription.
MODULE-IDENTITY
.1.3.6.1.4.1.1332.1.1.5.3.33
msanShMCImpControllerVariablesTableA Imp Controller report
SEQUENCE OF MsanShMCImpControllerVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.1
msanShMCImpControllerVariablesEntryAn IPM Controller entry
MsanShMCImpControllerVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1
msanShMCImpControllerIndexTable entry index, equal to <addr>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.1
msanShMCImpControllerSdrVersionSDR Version of the Management Controller Device Locator Record for this controllerro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.2
msanShMCImpControllerPicmgVersionPICMG Extension Version as reported by controller in a Get PICMG Properties replayro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.3
msanShMCImpControllerSlaveAddressDevice Slave Address as defined in the Management Controller Device Locator Record for this controllerro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.4
msanShMCImpControllerChannelNumberChannel Number as defined in the Management Controller Device Locator Record for this controllerro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.5
msanShMCImpControllerPowerStateNotificationPower State Notification as defined in the Management Controller Device Locator Record for this controllerro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.6
msanShMCImpControllerGlobalInitialisationGlobal Initialisation as defined in the Management Controller Device Locator Record for this controllerro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.7
msanShMCImpControllerCapabilitiesDevice Capabilities as defined in the Management Controller Device Locator Record for this controllerro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.8
msanShMCImpControllerIdStringDevice ID String as defined in the Management Controller Device Locator Record for this controllerro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.9
msanShMCImpControllerMaximumFruMax FRU Device ID as reported by controller in a Get PICMG Properties replayro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.10
msanShMCImpControllerOwnFruIdFRU Device ID from IPM Controller as reported by controller in a Get PICMG Properties replayro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.1.1.11
msanShMCFruDeviceVariablesTableA FRU Device report
SEQUENCE OF MsanShMCFruDeviceVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.2
msanShMCFruDeviceVariablesEntryAn IPM Controller entry
MsanShMCFruDeviceVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1
msanShMCFruDeviceIndexTable entry index, equal to <ipmb_addr> << 16 | <fru_id>ro
INTEGER (0..-1)
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.1
msanShMCFruDeviceSdrVersionSDR Version of the Management Controller Device Locator Record for this FRUro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.2
msanShMCFruDeviceSlaveAddressDevice Slave Address as defined in the Management Controller Device Locator Record for this FRUro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.3
msanShMCFruDeviceSFruDeviceIdFRU Device as defined in the Management Controller Device Locator Record for this FRUro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.4
msanShMCFruDeviceChannelNumberChannel Number as defined in the Management Controller Device Locator Record for this FRUro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.5
msanShMCFruDeviceDeviceTypeFor FRUs with FRU Device ID different from zero: Device Type as defined in the FRU Device Locator Record for this FRU. Since the Management Controller Device Locator Record doesn't provide the Device Type information, for Management Controller devices (FRU #0), this field is set to FRU Inventory Device (10h).ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.6
msanShMCFruDeviceDeviceTypeModifierFor FRUs with FRU Device ID different from zero: Device Type as defined in the FRU Device Locator Record for this FRU. Since the Management Controller Device Locator Record doesn't provide the Device Type information, for Management Controller devices (FRU #0), this field is set to Unspecified (FFh).ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.7
msanShMCFruDeviceFruEntityId(FRU) entity ID as defined in the Management Controller Device Locator Record for this FRUro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.8
msanShMCFruDeviceFruEntityInstanceChannel Number as defined in the Management Controller Device Locator Record for this controllerro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.9
msanShMCFruDeviceIdStringDevice ID String as defined in the Management Controller Device Locator Record for this FRUro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.10
msanShMCFruDeviceHotSwapStateCurrent PICMG 3.0 FRU state (M0..M7) for this FRU. If this variable is equal to n, that means that the FRU is in stat Mnro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.11
msanShMCFruDeviceActivatedWhen reading: 1 means that the FRU device is active (that is, in state M4), 0 is return otherwise. When writing: writing 1 to this variable triggers sending the Set FRU Activation (Activate FRU) command to this FRU, if the FRU is in state M2 or M5, and sending Set FRU Activation policy (Clear Locked) command if the FRU is in state M1. writin 0 to this variable triggers sending the Set FRU Activation (Deactivate FRU) command to this FRU, if the FRU is in state M2, M3, M4 or M5, and sending Set FRU Activation policy (Set Locked) command if the FRU is in state M1 or M6rw
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.2.1.12
msanShMCSensorVariablesTableA Sensor report
SEQUENCE OF MsanShMCSensorVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.3
msanShMCSensorVariablesEntryAn IPM Controller entry
MsanShMCSensorVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1
msanShMCSensorIndexTable entry index, equal to <ipmb_addr> << 16 | <seqnum>ro
INTEGER (0..-1)
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.1
msanShMCSensorSdrVersionSDR Version of the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.2
msanShMCSensorRecordTypeRecord Type of Sensor Record: 01h - for Full Sensor Recordsro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.3
msanShMCSensorOwnerIdSensor Owner ID as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.4
msanShMCSensorOwnerLunSensor Owner LUN as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.5
msanShMCSensorNumberSensor Number as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.6
msanShMCSensorEntityInstanceEntity Instance as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.7
msanShMCSensorEntityIdEntity ID as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.8
msanShMCSensorInitialisationSensor Initialisation as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.9
msanShMCSensorCapabilitiesSensor Capabilities as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.10
msanShMCSensorTypeSensor Type as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.11
msanShMCSensorEventEvent/reading Type Code as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.12
msanShMCSensorAssertionEventMaskAssertion Event Mask / Lower Treshold Reading Mask as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.13
msanShMCSensorDeassertionEventMaskDeassertion Event Mask / Upper Treshold Reading Mask as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.14
msanShMCSensorMaskDiscrete Reading Mask / Settable Treshold Mask as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.15
msanShMCSensorUnit1Sensor Units 1 as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.16
msanShMCSensorUnit2Sensor Units 2 as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.17
msanShMCSensorUnit3Sensor Units 3 as defined in the Sensor Recordro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.18
msanShMCSensorLinearizationLinearization as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.19
msanShMCSensorMM sensor reading conversion parameter as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.20
msanShMCSensorToleranceTolerance sensor reading conversion parameter as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.21
msanShMCSensorBB sensor reading conversion parameter as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.22
msanShMCSensorAccuracyAccuracy sensor reading conversion parameter as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.23
msanShMCSensorAccuracyExpAccuracy exp sensor reading conversion parameter as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.24
msanShMCSensorRexpR exp sensor reading conversion parameter as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.25
msanShMCSensorBexpB exp sensor reading conversion parameter as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.26
msanShMCSensorCharacteristicFlagsAnalog characteristic flags as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.27
msanShMCSensorReadingCurrent sensor reading in raw form.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.28
msanShMCSensorProcessedReadingCurrent sensor reading processed according to reading conversion formula for this sensorro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.29
msanShMCSensorNominalReadingNominal Reading as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.30
msanShMCSensorNormalMaximumNormal Maximum as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.31
msanShMCSensorNormalMinimumNormal Minimum as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.32
msanShMCSensorMaximumReadingSensor Maximum Reading as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.33
msanShMCSensorMinimumReadingSensor Minimum Reading as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.34
msanShMCSensorUpperNonRecoverableThrUpper non-recoverable Threshold as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.35
msanShMCSensorUpperCriticalThrUpper critical Threshold as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.36
msanShMCSensorUpperNonCriticalThrUpper non-critical Threshold as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.37
msanShMCSensorLowerNonRecoverableThrLower non-recoverable Threshold as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.38
msanShMCSensorLowerCriticalThrLower critical Threshold as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.39
msanShMCSensorLowerNonCriticalThrLower non-critical Threshold as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.40
msanShMCSensorPositiveGoingThrHysteresisPositive-going Threshold Hysteresis as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.41
msanShMCSensorNegativeGoingThrHysteresisNegative-going Threshold Hysteresis as defined in the Sensor Record. Valid only for full Sensor Records.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.42
msanShMCSensorIdStringDevice ID String as defined in the Sensor Record.ro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.43
msanShMCSensorEntireSensorDataDevice ID String as defined in the Sensor Record.ro
OCTET STRING
.1.3.6.1.4.1.1332.1.1.5.3.33.3.1.44
msanShMCBoardsTableA list of boards
SEQUENCE OF MsanShMCBoardsEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.4
msanShMCBoardsEntryAn IPM Controller entry
MsanShMCBoardsEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.4.1
msanShMCBoardsIndexTable index equal to <boardnum>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.4.1.1
msanShMCBoardsBoardBasicPresent0 - Board is absent 1 - Board is presentro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.4.1.2
msanShMCBoardsBoardBasicHealthyCauses the BMC to return a high level version of the system health status in integer. The BMC returns an integer with the following values: 0 - off 1 - onro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.4.1.3
msanShMCBoardsBoardBasicReseton read: 1 - board is in reset state 0 - otherwise on write: 0 - do nothing 1 - perform COLD resetrw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.4.1.4
msanShMCBoardsBoardBasicSlaveAddressThe on board IPMI controller 7-bit I2C addresses for IPMB messagesro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.4.1.5
msanShMCBoardsBoardBasicFruDeviceIdFRU Device ID field is used to identify individual FRU devices on the given LUN in the management controller. Up to 255 FRU devices can be located on a given LUN. FRU Device ID #00 at LUN 00b is predefined as being the FRU Device for the FRU that the management controller is located on. Since there are four possible LUNs for a management controller, this means up to 255*4 FRU devices can be supported behind a single management controller using this mechanism. The Read/Write FRU Device commands provide an abstracted interface that hides the technology used to implement the FRU device from system software.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.4.1.7
msanShMCSelTableA list of Sel
SEQUENCE OF MsanShMCSelEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.5
msanShMCSelEntryAn System Event Log Variables entry
MsanShMCSelEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.5.1
msanShMCSelIndexTable entry index, equal to <recid>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.5.1.1
msanShMCSelcontentsContents of the SEL entryro
OCTET STRING
.1.3.6.1.4.1.1332.1.1.5.3.33.5.1.2
msanShMCShelfTableA list of Shelf
SEQUENCE OF MsanShMCShelfEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.6
msanShMCShelfEntryAn System Event Log Variables entry
MsanShMCShelfEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.6.1
msanShMCShelfIndexTable entry index, equal to <shelfid>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.6.1.1
msanShMCShelfHealthy1 - if the shelf doesn't have unhealthy components, 0 - if there exist unhelthy components in the shelfro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.6.1.2
msanShMCPefConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.1332.1.1.5.3.33.8
msanShMCPefConfigurationSetInProgressSet in progrese parameterro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.8.1
msanShMCPefConfigurationControlPEF Control parameterrw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.8.2
msanShMCPefConfigurationActionGlobalControlPEF Action global control parameterrw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.8.3
msanShMCPefConfigurationStartupDelayPEF Startup Delay parameterrw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.8.4
msanShMCPefConfigurationAlertStartupDelayPEF Alert Startup Delay parameterro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.8.5
msanShMCPefConfigurationNumberOfEventFiltersNumber of Event Filters parameterro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.8.6
msanShMCPefConfigurationNumberOfAlertPoliciEntriesNumber of Alert Polici Entries parameterro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.8.7
msanShMCPefConfigurationSystemGuidSystem GUID parameter, excluding the 'Used to fill in the GUID field in a PET Trap' byterw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.8.8
msanShMCPefConfigurationNumberOfAlertStringsNumber of Alert Strings parameterro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.8.9
msanShMCPefConfigurationEventFilterTableA list of PefConfigurationEventFilter
SEQUENCE OF MsanShMCPefConfigurationEventFilterEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.14
msanShMCPefConfigurationEventFilterEntryAn System Event Log Variables entry
MsanShMCPefConfigurationEventFilterEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.14.1
msanShMCPefConfigurationEventFilterIndexTable entry index, equal to <filter>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.14.1.1
msanShMCPefConfigurationEventFilterDataEvent Filter Table entry data, excluding the Set Selector byterw
OCTET STRING
.1.3.6.1.4.1.1332.1.1.5.3.33.14.1.2
msanShMCPefConfigurationAlertStringTableA list of PEF Configuration Alert String
SEQUENCE OF MsanShMCPefConfigurationAlertStringEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.19
msanShMCPefConfigurationAlertStringEntryAn System Event Log Variables entry
MsanShMCPefConfigurationAlertStringEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.19.1
msanShMCPefConfigurationAlertStringIndexTable entry index, equal to <strnum>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.19.1.1
msanShMCPefConfigurationAlertStringKeyAlert String Keys entry data, excluding the Set Selector bytero
OCTET STRING
.1.3.6.1.4.1.1332.1.1.5.3.33.19.1.2
msanShMCPefConfigurationAlertStringAlert Strings entry data, excluding the Set Selector bytero
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.19.1.3
msanShMCFruInfoTableA list of Fru Infornations
SEQUENCE OF MsanShMCFruInfoEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.20
msanShMCFruInfoEntryAn FRU information
MsanShMCFruInfoEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.20.1
msanShMCFruInfoIndexIndex = (<ipmb addr> << 24) | (<fru id> << 16) | <block number>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.20.1.1
msanShMCFruInfoDataA block of dataro
OCTET STRING
.1.3.6.1.4.1.1332.1.1.5.3.33.20.1.2
msanShMCFruInfoDataWoWrite any number of bytes up to 32. Due to limitations in the current version of the SNMP agent, <block number> is interpreted as a byte offestrw
OCTET STRING
.1.3.6.1.4.1.1332.1.1.5.3.33.20.1.3
msanShMCBoardVariablesTableA list of boards
SEQUENCE OF MsanShMCBoardVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.32
msanShMCBoardVariablesEntryAn IPM Controller entry
MsanShMCBoardVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1
msanShMCBoardVariablesBoardBasicSlotNumberTable index equal to <boardnum>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.1
msanShMCBoardVariablesBoardBasicPresent0 - Board is absent 1 - Board is presentro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.2
msanShMCBoardVariablesBoardBasicHealthyCauses the BMC to return a high level version of the system health status in integer. The BMC returns an integer with the following values: 0 - off 1 - onro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.3
msanShMCBoardVariablesBoardBasicReseton read: 1 - board is in reset state 0 - otherwise on write: 0 - do nothing 1 - perform COLD resetrw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.4
msanShMCBoardVariablesBoardBasicPoweredon read: 1 - board is powered 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.5
msanShMCBoardVariablesBoardBasicSlaveAddressThe on board IPMI controller 7-bit I2C addresses for IPMB messagesro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.6
msanShMCBoardVariablesBoardBasicFruDeviceIdFRU Device ID field is used to identify individual FRU devices on the given LUN in the management controller. Up to 255 FRU devices can be located on a given LUN. FRU Device ID #00 at LUN 00b is predefined as being the FRU Device for the FRU that the management controller is located on. Since there are four possible LUNs for a management controller, this means up to 255*4 FRU devices can be supported behind a single management controller using this mechanism. The Read/Write FRU Device commands provide an abstracted interface that hides the technology used to implement the FRU device from system software.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.7
msanShMCBoardVariablesBoardBasicFruinfoProductAreaPresent1 - if product area is present 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.8
msanShMCBoardVariablesBoardBasicProductManufacturerReturns the product manufacturer from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.9
msanShMCBoardVariablesBoardBasicProductNameReturns the product name from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.10
msanShMCBoardVariablesBoardBasicProductPartModelNumberReturns the product part model from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.11
msanShMCBoardVariablesBoardBasicProductVersionNumberReturns the product version number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.12
msanShMCBoardVariablesBoardBasicProductSerialNumberReturns the product serial number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.13
msanShMCBoardVariablesBoardBasicBoardAreaPresent1 - if board area is present 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.14
msanShMCBoardVariablesBoardBasicBoardManufacturerReturns the board manufacturer from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.15
msanShMCBoardVariablesBoardBasicBoardProductNameReturns the board product name from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.16
msanShMCBoardVariablesBoardBasicBoardSerialNumberReturns the board serial number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.17
msanShMCBoardVariablesBoardBasicBoardPartNumberReturns the board part number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.18
msanShMCBoardVariablesBoardBasicBoardManufactureTimeReturns the board manufacturing time: the number of seconds since 00:00:00, January 1, 1970, CoordinatedUnivarsal Time (UTC): -1 if the corresponding field is not present in the board FRu information.ro
Integer32
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.19
msanShMCBoardVariablesSelectivePowerOffSwitchOffTypeSelective_Power_Off switch off type per board.rw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.32.1.20
msanShMCFanTrayVariablesTableA list of Fan Trays
SEQUENCE OF MsanShMCFanTrayVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.33
msanShMCFanTrayVariablesEntryAn IPM Controller entry
MsanShMCFanTrayVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1
msanShMCFanTraySlotNumberTable index equal to <boardnum>,<Lun>,<Fru id><Sensor number>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.1
msanShMCFanTrayPresent0 - Board is absent 1 - Board is presentro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.2
msanShMCFanTrayHealthyCauses the BMC to return a high level version of the system health status in integer. The BMC returns an integer with the following values: 0 - off 1 - onro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.3
msanShMCFanTrayHealthLedon read: 1 - led is on 0 - led is off on write: 0 - turn led off 1 - turn led onrw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.4
msanShMCFanTraySlaveAddressThe on board IPMI controller 7-bit I2C addresses for IPMB messagesro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.5
msanShMCFanTrayFruDeviceIdFRU Device ID field is used to identify individual FRU devices on the given LUN in the management controller. Up to 255 FRU devices can be located on a given LUN. FRU Device ID #00 at LUN 00b is predefined as being the FRU Device for the FRU that the management controller is located on. Since there are four possible LUNs for a management controller, this means up to 255*4 FRU devices can be supported behind a single management controller using this mechanism. The Read/Write FRU Device commands provide an abstracted interface that hides the technology used to implement the FRU device from system software.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.6
msanShMCFanTrayFruinfoProductAreaPresent1 - if product area is present 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.7
msanShMCFanTrayFruinfoProductManufacturerReturns the product manufacturer from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.8
msanShMCFanTrayFruinfoProductNameReturns the product name from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.9
msanShMCFanTrayFruinfoProductPartModelNumberReturns the product part model from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.10
msanShMCFanTrayFruinfoProductVersionNumberReturns the product version number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.11
msanShMCFanTrayFruinfoProductSerialNumberReturns the product serial number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.12
msanShMCFanTrayFruinfoBoardAreaPresent1 - if board area is present 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.13
msanShMCFanTrayFruinfoBoardManufacturerReturns the board manufacturer from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.14
msanShMCFanTrayFruinfoBoardProductNameReturns the board product name from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.15
msanShMCFanTrayFruinfoBoardSerialNumberReturns the board serial number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.16
msanShMCFanTrayFruinfoBoardPartNumberReturns the board part number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.17
msanShMCFanTrayFruinfoBoardManufactureTimeReturns the board manufacturing time: the number of seconds since 00:00:00, January 1, 1970, CoordinatedUnivarsal Time (UTC): -1 if the corresponding field is not present in the board FRu information.ro
Integer32
.1.3.6.1.4.1.1332.1.1.5.3.33.33.1.18
msanShMCPowerSupplyVariablesTableA list of Power Supplys
SEQUENCE OF MsanShMCPowerSupplyVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.34
msanShMCPowerSupplyVariablesEntryAn IPM Controller entry
MsanShMCPowerSupplyVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1
msanShMCPowerSupplySlotNumberTable index equal to <boardnum>,<Lun>,<Fru id><Sensor number>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.1
msanShMCPowerSupplyDegrade0 - Board is absent 1 - Board is presentro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.2
msanShMCPowerSupplyFailCauses the BMC to return a high level version of the system health status in integer. The BMC returns an integer with the following values: 0 - off 1 - onro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.3
msanShMCPowerSupplyInhibiton read: 1 - if power supply is in the Inhibited state 0 - otherwise on write: 1 - Inhibit power supply 0 - Reenable power supplyrw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.4
msanShMCPowerSupplyHealthyCauses the BMC to return a high level version of the system health status in integer. The BMC returns an integer with the following values: 0 - off 1 - onrw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.5
msanShMCPowerSupplySlaveAddressThe on board IPMI controller 7-bit I2C addresses for IPMB messagesro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.6
msanShMCPowerSupplyFruDeviceIdFRU Device ID field is used to identify individual FRU devices on the given LUN in the management controller. Up to 255 FRU devices can be located on a given LUN. FRU Device ID #00 at LUN 00b is predefined as being the FRU Device for the FRU that the management controller is located on. Since there are four possible LUNs for a management controller, this means up to 255*4 FRU devices can be supported behind a single management controller using this mechanism. The Read/Write FRU Device commands provide an abstracted interface that hides the technology used to implement the FRU device from system software.ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.7
msanShMCPowerSupplyFruinfoProductAreaPresent1 - if product area is present 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.8
msanShMCPowerSupplyFruinfoProductManufacturerReturns the product manufacturer from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.9
msanShMCPowerSupplyFruinfoProductNameReturns the product name from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.10
msanShMCPowerSupplyFruinfoProductPartModelNumberReturns the product part model from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.11
msanShMCPowerSupplyFruinfoProductVersionNumberReturns the product version number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.12
msanShMCPowerSupplyFruinfoProductSerialNumberReturns the product serial number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.13
msanShMCPowerSupplyFruinfoBoardAreaPresent1 - if board area is present 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.14
msanShMCPowerSupplyFruinfoBoardManufacturerReturns the board manufacturer from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.15
msanShMCPowerSupplyFruinfoBoardProductNameReturns the board product name from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.16
msanShMCPowerSupplyFruinfoBoardSerialNumberReturns the board serial number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.17
msanShMCPowerSupplyFruinfoBoardPartNumberReturns the board part number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.18
msanShMCPowerSupplyFruinfoBoardmanufactureTimeReturns the board manufacturing time: the number of seconds since 00:00:00, January 1, 1970, CoordinatedUnivarsal Time (UTC): -1 if the corresponding field is not present in the board FRu information.ro
Integer32
.1.3.6.1.4.1.1332.1.1.5.3.33.34.1.19
msanShMCShelfManagerVariablesTableA list of Shelf Managers
SEQUENCE OF MsanShMCShelfManagerVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.35
msanShMCShelfManagerVariablesEntryAn IPM Controller entry
MsanShMCShelfManagerVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1
msanShMCShelfManagerSlotNumberTable index equal to <boardnum>,<Lun>,<Fru id><Sensor number>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.1
msanShMCShelfManagerSlaveAddressThe on board IPMI controller 7-bit I2C addresses for IPMB messagesro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.2
msanShMCShelfManagerPresent0 - Shelf manager is absent 1 - Shelf manager is presentro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.3
msanShMCShelfManagerHealthyCauses the BMC to return a high level version of the system health status in integer. The BMC returns an integer with the following values: 0 - off 1 - onro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.4
msanShMCShelfManagerActiveon read: 1 - Shelf manager is active 0 - Shelf manager is in standby on write: 0 - initiate switchover other - no changerw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.5
msanShMCShelfManagerReseton read: 1 - board is in reset state 0 - otherwise on write: 0 - do nothing 1 - perform COLD resetrw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.6
msanShMCShelfManagerFruinfoProductAreaPresent1 - if product area is present 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.7
msanShMCShelfManagerFruinfoProductManufacturerReturns the product manufacturer from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.8
msanShMCShelfManagerFruinfoProductNameReturns the product name from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.9
msanShMCShelfManagerFruinfoProductPartModelNumberReturns the product part model from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.10
msanShMCShelfManagerFruinfoProductVersionNumberReturns the product version number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.11
msanShMCShelfManagerFruinfoProductSerialNumberReturns the product serial number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.12
msanShMCShelfManagerFruinfoBoardAreaPresent1 - if board area is present 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.13
msanShMCShelfManagerFruinfoBoardManufacturerReturns the board manufacturer from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.14
msanShMCShelfManagerFruinfoBoardProductNameReturns the board product name from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.15
msanShMCShelfManagerFruinfoBoardSerialNumberReturns the board serial number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.16
msanShMCShelfManagerFruinfoBoardPartNumberReturns the board part number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.17
msanShMCShelfManagerFruinfoBoardmanufactureTimeReturns the board manufacturing time: the number of seconds since 00:00:00, January 1, 1970, CoordinatedUnivarsal Time (UTC): -1 if the corresponding field is not present in the board FRu information.ro
Integer32
.1.3.6.1.4.1.1332.1.1.5.3.33.35.1.18
msanShMCChassisVariablesTableA Chassis report
SEQUENCE OF MsanShMCChassisVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.36
msanShMCChassisVariablesEntryAn IPM Controller entry
MsanShMCChassisVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1
msanShMCChassisIdShelf Addressro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.1
msanShMCChassisTypeThe 8 bit Chassis type from the Shelf FRU Informationro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.2
msanShMCChassisPartNumberChassis Part Number from the Shelf FRU Informationro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.3
msanShMCChassisSerialNumberChassis Serial Number from the Shelf FRU Informationro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.4
msanShMCChassisProductAreaPresent1 - if product area is present 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.5
msanShMCChassisProductManufacturerReturns the product manufacturer from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.6
msanShMCChassisProductNameReturns the product name from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.7
msanShMCChassisProductPartModelNumberReturns the product part model from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.8
msanShMCChassisProductVersionNumberReturns the product version number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.9
msanShMCChassisProductSerialNumberReturns the product serial number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.10
msanShMCChassisBoardAreaPresent1 - if board area is present 0 - otherwisero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.11
msanShMCChassisBoardManufacturerReturns the board manufacturer from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.12
msanShMCChassisBoardProductNameReturns the board product name from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.13
msanShMCChassisBoardSerialNumberReturns the board serial number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.14
msanShMCChassisBoardPartNumberReturns the board part number from the board FRU information or N/Aro
DisplayString
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.15
msanShMCChassisBoardmanufactureTimeReturns the board manufacturing time: the number of seconds since 00:00:00, January 1, 1970, CoordinatedUnivarsal Time (UTC): -1 if the corresponding field is not present in the board FRu information.ro
Integer32
.1.3.6.1.4.1.1332.1.1.5.3.33.36.1.16
msanShMCEventVariablesTableA Event report
SEQUENCE OF MsanShMCEventVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.37
msanShMCEventVariablesEntryAn IPM Controller entry
MsanShMCEventVariablesEntry
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1
msanShMCEventIndexTable entry index, equal to <selentrynum>ro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.1
msanShMCEventDeletereturns 0 on reading, Writing 1 causes the current SEL entry to be deletedrw
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.2
msanShMCEventTimeStampReturns the board manufacturing time: the number of seconds since 00:00:00, January 1, 1970, CoordinatedUnivarsal Time (UTC): -1 if the corresponding field is not present in the board FRu information.ro
Integer32
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.3
msanShMCEventClassEvent classro
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.4
msanShMCEventTypeEvent typero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.5
msanShMCEventAssertedEvent typero
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.6
msanShMCEventOriginSiteTypeOrigin Site Typero
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.7
msanShMCEventOriginSiteNumberOrigin Site Numberro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.8
msanShMCEventOriginSlaveAddressOrigin Slave Addressro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.9
msanShMCEventOriginFruIdOrigin FRU IDro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.10
msanShMCEventOriginSensorNumberOrigin Sensor Numberro
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.37.1.11
msanShMCGlobal
OBJECT IDENTIFIER
.1.3.6.1.4.1.1332.1.1.5.3.33.38
msanShMCSelectivePowerOffAdminModeSelective_Power_Off power off delay.rw
Enumeration
.1.3.6.1.4.1.1332.1.1.5.3.33.38.1
msanSHMCSelectivePowerOffOffDelaySelective_Power_Off power off delay.rw
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.38.2
msanSHMCSelectivePowerOffOnDelaySelective_Power_Off power on delay.rw
INTEGER
.1.3.6.1.4.1.1332.1.1.5.3.33.38.3