IRM3-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
251
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
251 total| Object Name |
|---|
device OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.1 |
RFC1213-MIB Unknown .1.3.6.1.4.1.52.1.2.1.1 |
deviceMMACTypeIndicates the type of MMAC.ro Enumeration .1.3.6.1.4.1.52.1.2.1.1.2 |
deviceSlotsNumber of available device slots in this device, including the
IRM slot.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.3 |
deviceOccupiedSlotsThe slots that contain MIM boards. This field is bit encoded (eg.
if a bit is set then that board is present). For example, a value
of 3 indicates that there are boards in the IRM slot and the first
MIM slot.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.4 |
devicePortsOnThe number of operating ports on the device.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.5 |
deviceTotalPortsThe total number of repeater ports on the MMAC.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.6 |
deviceTotalPktsThe number of packets detected on all ports of this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.7 |
deviceTotalErrorsThe sum of all of the errors listed including alignment, CRC, runts,
giants, and out of window collisions.ro Counter .1.3.6.1.4.1.52.1.2.1.1.8 |
deviceTransmitCollsThe number of transmit collisions detected by this MMAC.ro Counter .1.3.6.1.4.1.52.1.2.1.1.9 |
deviceRecCollsThe number of receive collisions detected by this MMAC.ro Counter .1.3.6.1.4.1.52.1.2.1.1.10 |
deviceAlignErrsThe number of packets with alignment errors detected.ro Counter .1.3.6.1.4.1.52.1.2.1.1.11 |
deviceCRCErrsThe number of packets with bad CRC detected.ro Counter .1.3.6.1.4.1.52.1.2.1.1.12 |
deviceRuntsThe number of runt frames detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.13 |
deviceOOWCollsThe number of out-of-window collisions detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.14 |
deviceNoResourcesThe number of No resource condtions detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.15 |
deviceRecBytesThe number of bytes detected on the network.ro Counter .1.3.6.1.4.1.52.1.2.1.1.16 |
deviceGiantFramesThe number of packets longer than 1518 bytes.ro Counter .1.3.6.1.4.1.52.1.2.1.1.17 |
deviceRestartIf this object is set to 1 the device is restarted.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.18 |
deviceResetCountersIf this object is set to 1, all of the devices counters are reset
to 0.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.19 |
deviceRedundantCtsThe number of redundant circuits available for use.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.20 |
deviceDiscoverWhen this variable is set to 1 The following events occur:
(1) The device sends a LINK-UP trap
(2) The device sends a proprietary packet that will
cause all other Cabeltron devices on that local
network to send a LINK-UP trap.rwdeprecated INTEGER .1.3.6.1.4.1.52.1.2.1.1.21 |
deviceTimeBaseThe number of seconds used as the interval for performing all of
the rate alarm checks. The minimum is 10 secs.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.24 |
deviceResetRedundancySetting this object to a 1 will reset redundancy for the entire box.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.25 |
deviceSrcAddrAgingTimeThe number of minutes that a source address is not detected before it
is removed from the source address table.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.26 |
deviceSrcAddrTrapsControls sending of source address related traps.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.27 |
deviceSrcAddrLockedIf this is set to 2, any source addresses that are detected on
station ports that are not in the table will cause the port to
be turned off.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.28 |
deviceEtherOccupiedSlotsThe slots that contain Ethernet MIM boards. This field
is bit encoded (eg. if a bit is set then that board is present).
For example, a value of 2 indicates that there is an Ethernet board
in the first MIM slot.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.29 |
deviceTROccupiedSlotsThe slots that contain managable Token Ring MIM boards. This
field is bit encoded (eg. if a bit is set then that board is
present). For example, a value of 2 indicates that there is a
managable Token Ring board in the first MIM slot.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.30 |
deviceFDDIOccupiedSlotsThe slots that contain FDDI MIM boards. This field is bit encoded
(eg. if a bit is set then that board is present). For example, a
value of 2 indicates that there is an FDDI board in the first MIM
slot.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.31 |
deviceRestoreDefaultsIf this object is set to 1 the factory defaults are restored. This,
however, does not affect the device's IP address.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.32 |
deviceActiveUsersThe number of active users seen by this device.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.33 |
deviceOSIFramesThe number of frames with OSI protocol seen by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.34 |
deviceNovellFramesThe number of frames with NOVELL protocol seen by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.35 |
deviceBanyanFramesThe number of frames with BANYAN protocol seen by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.36 |
deviceDECNetFramesThe number of frames with DECNET protocol seen by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.37 |
deviceXNSFramesThe number of frames with XNS protocol seen by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.38 |
deviceIPFramesThe number of frames with TCPIP protocol seen by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.39 |
deviceCtronFramesThe number of frames with Cabletron protocol seen by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.40 |
deviceAppletalkFramesThe number of frames with Appletalk protocol seen by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.41 |
deviceOtherFramesThe number of frames seen by this device, that do not fall into
any of the previously listed protocol catagories.ro Counter .1.3.6.1.4.1.52.1.2.1.1.42 |
device64To127FramesThe number of frames seen by this device, with frame sizes between
64 and 127 bytes.ro Counter .1.3.6.1.4.1.52.1.2.1.1.43 |
device128To255FramesThe number of frames seen by this device, with frame sizes between
128 and 255 bytes.ro Counter .1.3.6.1.4.1.52.1.2.1.1.44 |
device256To511FramesThe number of frames seen by this device, with frame sizes between
256 and 511 bytes.ro Counter .1.3.6.1.4.1.52.1.2.1.1.45 |
device512To1023FramesThe number of frames seen by this device, with frame sizes between
512 and 1023 bytes.ro Counter .1.3.6.1.4.1.52.1.2.1.1.46 |
device1024To1518FramesThe number of frames seen by this device, with frame sizes between
1024 and 1518 bytes.ro Counter .1.3.6.1.4.1.52.1.2.1.1.47 |
deviceBroadPktsThe sum of broadcast packets detected on all ports of this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.48 |
deviceMultPktsThe sum of multicast packets detected on all ports of this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.49 |
deviceThdPartyOccupiedSlotsThe slots that contain Third Party MIM boards. This field
is bit encoded (eg. if a bit is set then that board is present).
For example, a value of 2 indicates that there is a Third Party
board in the first MIM slot.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.51 |
deviceImimOccupiedSlotsThe slots that contain Cabletron Intelligent MIM boards. This field
is bit encoded (eg. if a bit is set then that board is present).
For example, a value of 2 indicates that there is an Intelligent board
in the first MIM slot.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.52 |
deviceLinkTrapsControls sending of link related traps.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.54 |
ctIPDefaultFrameTypeDefines the default frame type that will be used by the
device. A device will understand both frame types and will
respond based upon the framing type that is learned for
the given address. This object defines the type of framing
that will be used if no framing is known, for example ARP
requests.
Setting a value of 8022snap(2) will result in framing
802.3 - 802.2 - IP packets being generated by default.
Setting a value of ethernet(1) will result in framing
ethernet IP packets by default.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.56 |
deviceSrcAddrTypeSelects the hashing algorithm of source addresses, DEC or IPrw Enumeration .1.3.6.1.4.1.52.1.2.1.1.57 |
board OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.2 |
port OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.3 |
sourceAddr OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.7 |
sourceAddrBoardThe board number of the port that the supplied source address has
been found on.ro INTEGER .1.3.6.1.4.1.52.1.2.1.7.1 |
sourceAddrPortThe port number of the port that the supplied source address has
been found on.ro INTEGER .1.3.6.1.4.1.52.1.2.1.7.2 |
redundancy OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.8 |
redundancyPollIntervalThe number of seconds between polls for redundancy.rw INTEGER .1.3.6.1.4.1.52.1.2.1.8.1 |
redundancyTestTodThe time of day at which the redundant circuits should be tested.rw OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.2 |
redundancyPerformTestTest the redundant circuit.rw Enumeration .1.3.6.1.4.1.52.1.2.1.8.3 |
redundancyCircuitNameThe name of the indicated circuit.rw OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.4 |
redundancyRetryCountThe number of unanswered polls allowed for the indicated circuit
before the current connection is declared bad.rw INTEGER .1.3.6.1.4.1.52.1.2.1.8.5 |
redundancyNumBPsThe number of board/port combinations associated with the indicated
circuit.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.6 |
redundancyCircuitBoardThe boards associated with the indicated circuit.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.7 |
redundancyCircuitPortThe ports associated with the indicated circuit.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.8 |
redundancyCircuitTypesThe type of each port associated with the indicated circuit.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.9 |
redundancyCircuitNumAddrThe number of addresses associated with the indicated circuit.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.10 |
redundancyCircuitMACAddrAddAdds this ethernet address to the polling list for the indicated
circuit.rw NetworkAddress .1.3.6.1.4.1.52.1.2.1.8.11 |
redundancyCircuitMACAddrDelRemoves this ethernet address from the polling list for the
indicated circuit.rw NetworkAddress .1.3.6.1.4.1.52.1.2.1.8.12 |
redundancyCircuitMACAddrDispThe ethernet addresses associated with the indicated circuit,
accessed by index.ro NetworkAddress .1.3.6.1.4.1.52.1.2.1.8.13 |
redundancyCircuitEnableEnables and disables the indicated circuit.rw Enumeration .1.3.6.1.4.1.52.1.2.1.8.14 |
redundancyCircuitResetReset the indicated circuit. Return all of the associated board
and ports to NOT-USED, remove associated addresses from the polling
list, reset the circuit name and retry count to default values.rw Enumeration .1.3.6.1.4.1.52.1.2.1.8.15 |
alarm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9 |
devAlrm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1 |
devTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.1 |
devTrafficEnableEnable the sending of device level traffic traps.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.1.1 |
devTrafficThresholdThe threshold of packets within the Devicetimebase that will cause
a traffic alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.1.2 |
devColls OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.2 |
devCollsEnableEnable the sending of device level collision alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.2.1 |
devCollsThresholdThis object represents the number of collisions per good packet
measured by the device that will generate an alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.2.2 |
devError OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.3 |
devErrorEnableEnable the sending of device level error alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.3.1 |
devErrorThresholdThis object represents the percentage of errors per good packet that
will generate an alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.3.2 |
devErrorSourceThe type of error used for the error alarm.
The integer is a bit encoded version of which errors to include
in the error sum. The bits are encoded as follows:
CRCErrors - Bit 0 - Least Significant Bit
runts - Bit 1
OOWColls - Bit 2
alignErrs - Bit 3
NoResource - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.3.3 |
devBroad OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.4 |
devBroadEnableEnable the sending of device level broadcast traps.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.4.1 |
devBroadThresholdThe threshold of broadcast packets within the Devicetimebase
that will cause a broadcast alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.4.2 |
bdAlrm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2 |
bdTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.1 |
bdTrafficEnableEnable the sending of board level traffic traps for this board.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.1.1 |
bdTrafficThresholdThe threshold of packets within the Devicetimebase that will cause
a traffic alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.1.2 |
bdTrafficBdDisablePermit a board to be disabled on a traffic threshold alarm.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.1.3 |
bdColls OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.2 |
bdCollsEnableEnable the sending of board level collision alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.2.1 |
bdCollsThresholdThis object represents the number of collisions per good packet
measured by the board that will generate an alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.2.2 |
bdCollsBdDisablePermit a board to be disabled on a collision threshold alarm.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.2.3 |
bdError OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.3 |
bdErrorEnableEnable the sending of board level error alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.3.1 |
bdErrorThresholdThis object represents the percentage of errors per good packet
that will generate an alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.3.2 |
bdErrorSourceThe type of error used for the error alarm.
The integer is a bit encoded version of which errors to include
in the error sum. The bits are encoded as follows:
CRCErrors - Bit 0 Least Significant Bit
runts - Bit 1
OOWColls - Bit 2
alignErrs - Bit 3
NoResource - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.3.3 |
bdErrorBdDisablePermit a board to be disabled on an error threshold alarm.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.3.4 |
bdBroad OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.4 |
bdBroadEnableEnable the sending of board level broadcast traps for this board.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.4.1 |
bdBroadThresholdThe threshold of broadcast packets within the Devicetimebase
that will cause a broadcast alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.4.2 |
bdBroadDisablePermit a board to be disabled on a broadcast threshold alarm.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.4.3 |
portAlrm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3 |
portTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.1 |
portTrafficEnableEnable the sending of port level traffic traps for this port.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.1.1 |
portTrafficThresholdThe threshold of packets within the Devicetimebase that will cause
a traffic alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.1.2 |
portTrafficPortDisablePermit a port to be disabled on a traffic threshold alarm.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.1.3 |
portColls OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.2 |
portCollsEnableEnable the sending of port level collsion alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.2.1 |
portCollsThresholdThis object represents the number of collisions per good packet
measured by the port that will generate an alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.2.2 |
portCollsPortDisablePermit a port to be disabled on a collision threshold alarm.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.2.3 |
portError OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.3 |
portErrorEnableEnable the sending of port level error alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.3.1 |
portErrorThresholdThis object represents the percentage of errors per good packet
that will generate an alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.3.2 |
portErrorSourceThe type of error used for the error alarm.
The integer is a bit encoded version of which errors to include
in the error sum. The bits are encoded as follows:
CRCErrors - Bit 0 - Least Significant Bit
runts - Bit 1
OOWColls - Bit 2
alignErrs - Bit 3
NoResource - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.3.3 |
portErrorPortDisablePermit a port to be disabled on an error threshold alarm.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.3.4 |
portBroad OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.4 |
portBroadEnableEnable the sending of port level broadcast alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.4.1 |
portBroadThresholdThe threshold of broadcast packets within the Devicetimebase that
will cause a broadcast alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.4.2 |
portBroadDisablePermit a port to be disabled on a broadcast threshold alarm.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.4.3 |
deviceR2 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.1 |
tokenRingD OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.1.3 |
deviceTRPortsOnThis gives the number of Token Ring ports enabled on this device.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.1 |
deviceTRPortsThis gives the total number of Token Ring ports on this device.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.2 |
deviceTRRingPortsOnThis gives the number of Token Ring ring ports that are enabled.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.3 |
deviceTRRingPortsThis gives the total number of Token Ring ring ports on this device.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.4 |
deviceTRLansThis gives the number of Token Rings formed on this device.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.5 |
deviceTRBoardsThis returns the number of Token Ring boards on the device.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.6 |
deviceTRBoardMapThe slots that contain Token Ring MIM boards. This field is bit
encoded (eg. if a bit is set then that board is present). For
example, a value of 2 indicates that there is a Token Ring board
in the first MIM slot.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.7 |
networkR2 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.2 |
boardR2 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3 |
commonB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.1 |
boardIndexThe slot number of this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.1 |
boardNameThe name of the board. This field will only contain printable ASCII
characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.1.2.2.3.1.2 |
boardTypeThe type of the MIM. (eg. FOT, TPT, etc). See appendix A for
encoding.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.3 |
boardTotalPortsTotal number of ports supported on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.4 |
boardStatusThe administrative status of this MIM.rwdeprecated Enumeration .1.3.6.1.4.1.52.1.2.2.3.1.5 |
boardPortsOnThe number of operating ports on the board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.6 |
boardOperReturns a value indicating whether any of the enabled ports on the
board are not operational, thereby placing the board in a
non-operational state.rodeprecated Enumeration .1.3.6.1.4.1.52.1.2.2.3.1.7 |
boardActiveUsersThe number of active users seen on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.8 |
ethernetB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.2 |
boardTotalPktsThe total number of packets this board has seen since the last
reset.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.1 |
boardErrorPktsThe number of packets that have experienced an error.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.2 |
boardTransCollsThe number of transmit collisions this board has detected.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.3 |
boardRecCollsThe number of Receive mode collisions this board has detected.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.4 |
boardAlignErrsThe number of misaligned frames this board has detected.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.5 |
boardCRCErrsThe number of packets with bad CRC detected.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.6 |
boardRuntsThe number of runt frames detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.7 |
boardOOWCollsThe number of out-of-window collisions detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.8 |
boardNoResourcesThe number of times the no resources condition was detected for
this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.9 |
boardRecBytesThe number of bytes detected on this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.10 |
boardGiantsThe number of packets longer than 1518 bytes detected on this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.11 |
boardOSIFramesThe number of frames with OSI protocol seen by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.12 |
boardNovellFramesThe number of frames with NOVELL protocol seen by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.13 |
boardBanyanFramesThe number of frames with BANYAN protocol seen by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.14 |
boardDECNetFramesThe number of frames with DECNET protocol seen by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.15 |
boardXNSFramesThe number of frames with XNS protocol seen by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.16 |
boardIPFramesThe number of frames with TCPIP protocol seen by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.17 |
boardCtronFramesThe number of frames with Cabletron protocol seen by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.18 |
boardAppletalkFramesThe number of frames with Appletalk protocol seen by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.19 |
boardOtherFramesThe number of frames seen by this board, that do not fall into
any of the previously listed protocol catagories.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.20 |
board64To127FramesThe number of frames seen by this board, with frame sizes between
64 and 127 bytes.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.21 |
board128To255FramesThe number of frames seen by this board, with frame sizes between
128 and 255 bytes.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.22 |
board256To511FramesThe number of frames seen by this board, with frame sizes between
256 and 511 bytes.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.23 |
board512To1023FramesThe number of frames seen by this board, with frame sizes between
512 and 1023 bytes.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.24 |
board1024To1518FramesThe number of frames seen by this board, with frame sizes between
1024 and 1518 bytes.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.25 |
boardBroadPktsThe sum of broadcast packets detected on all ports of this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.26 |
boardMultPktsThe sum of multicast packets detected on all ports of this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.27 |
boardSrcAddrLockedIf this is set to 2, any source addresses that are detected on
station port that are not in the table will cause the port to
be turned off.rw Enumeration .1.3.6.1.4.1.52.1.2.2.3.2.31 |
tokenRingB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.3 |
boardTotalRingPortsThe total number of ring ports on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.1 |
boardTotalStationPortsThe total number of station ports on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.2 |
boardModeStatusThis describes the mode of this board. autoMode
means the board is using the hardware defaults. mgmtMode
means the board is using setting by the user.rw Enumeration .1.3.6.1.4.1.52.1.2.2.3.3.3 |
boardTotalRingPortsOnThe number of enabled ring ports on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.4 |
boardTotalStationPortsOnThe number of enabled station ports on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.5 |
boardSpeedThe speed of the board. The board will expect to receive
data at this speed.rw Enumeration .1.3.6.1.4.1.52.1.2.2.3.3.6 |
ringSpeedFaultData speed of station mismatches configuration speed of board. Board
is automatically bypassed.ro Enumeration .1.3.6.1.4.1.52.1.2.2.3.3.7 |
boardSpeedFaultPortThis object indicates which ring speed detect circuit(s) caused the
fault, if there was one. The return code indicates the location on
the board feeding the speed detect circuit(s). Ring in means the
circuit on the back-up path between the ring out port and the ring
in port. FNB means the circuit between the ring in port and the FNB.
NotApplicable means that a ring Speed Fault has not occurred.
Since more than one circuit can cause the fault, the return code is
the sum of the following values:
1 - FNB
2 - RingIn
4 - RingOut
8 - NotApplicablero INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.8 |
boardFirstRingPortThis object defines which port on the board is the first ring port.
All ring port numbers will be consecutive. Using this in conjunction
with BoardRingPorts, all ring port numbers can be determined.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.9 |
boardBypassRingPortStateThis object sets and reports the state of the ring bypass relay on
boards which contain a ring bypass relay. The ring bypass relay will
separate only the ring ports from the FNB. The FNB only bypasses the
station ports on these boards. The illegal value (3) will return an
error status if set.rw Enumeration .1.3.6.1.4.1.52.1.2.2.3.3.10 |
fDDIB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.4 |
portR2 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4 |
commonP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.1 |
portIndexThe slot number of this port.ro INTEGER .1.3.6.1.4.1.52.1.2.2.4.1.1 |
portMediaTypeThe type of the port. (eg. FOT, TPT, etc).ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.1.2 |
portAdminStateThe administrative status of this port.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.1.3 |
portSourceAddrA source address that has been seen on this port.ro OCTET STRING .1.3.6.1.4.1.52.1.2.2.4.1.4 |
portOperReturns a value indicating whether this port is in an operational
state.ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.1.5 |
portActiveUsersThe number of active users seen on this port.ro INTEGER .1.3.6.1.4.1.52.1.2.2.4.1.6 |
portNameThe name of the port. this field will only contain printable ASCII
characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.1.2.2.4.1.7 |
ethernetP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.2 |
portTopologyTypeThe topological type of the port.ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.1 |
portLinkStatusThe state of the link signal for this port.ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.2 |
portStatusThe network state of this port.ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.3 |
portTotalPktsThe total number of packets this port has seen since the last reset.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.4 |
portErrorPktsThe number of packets that have experienced an error.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.5 |
portXmitCollsThe number of Transmit mode collisions this port has detected.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.6 |
portRecCollsThe number of Receive mode collisions this port has detected.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.7 |
portAlignErrsThe number of misaligned frames this port has detected.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.8 |
portCRCErrsThe number of packets with bad CRC detected.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.9 |
portRuntsThe number of runt frames detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.10 |
portOOWCollsThe number of out-of-window collisions detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.11 |
portNoResorcesThe number of times the no resource condition is detected on this
port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.12 |
portRecBytesThe number of bytes detected on the network.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.13 |
portGiantsThe number of frames longer than 1518 bytes detected on this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.14 |
portRedundCrtThe redundant circuit with which this port is associated.rw INTEGER .1.3.6.1.4.1.52.1.2.2.4.2.15 |
portRedundTypeThe type of port this port is in the redundant circuit. The port
must be associated with a redundant circuit first, using the object
portRedundCrt.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.16 |
portRedundStatusThe current state of this port is in the redundant circuit. The port
must be associated with a redundant circuit first, using the object
portRedundCrt.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.17 |
portForceTrunkTypeThis variable forces a port to be a trunk port.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.18 |
portOSIFramesThe number of frames with OSI protocol seen by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.19 |
portNovellFramesThe number of frames with NOVELL protocol seen by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.20 |
portBanyanFramesThe number of frames with BANYAN protocol seen by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.21 |
portDECNetFramesThe number of frames with DECNET protocol seen by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.22 |
portXNSFramesThe number of frames with XNS protocol seen by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.23 |
portIPFramesThe number of frames with TCPIP protocol seen by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.24 |
portCtronFramesThe number of frames with Cabletron protocol seen by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.25 |
portAppletalkFramesThe number of frames with Appletalk protocol seen by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.26 |
portOtherFramesThe number of frames seen by this port, that do not fall into
any of the previously listed protocol catagories.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.27 |
port64To127FramesThe number of frames seen by this port, with frame sizes between
64 and 127 bytes.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.28 |
port128To255FramesThe number of frames seen by this port, with frame sizes between
128 and 255 bytes.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.29 |
port256To511FramesThe number of frames seen by this port, with frame sizes between
256 and 511 bytes.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.30 |
port512To1023FramesThe number of frames seen by this port, with frame sizes between
512 and 1023 bytes.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.31 |
port1024To1518FramesThe number of frames seen by this port, with frame sizes between
1024 and 1518 bytes.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.32 |
portBroadPktsThe sum of broadcast packets detected on this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.33 |
portMultPktsThe sum of multicast packets detected on this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.34 |
portSrcAddrLockedIf this is set to 2, any source addresses that are detected on
station ports that are not in the table will cause the port to
be turned off.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.38 |
tokenRingP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3 |
stationP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3.1 |
stationPortLinkStatusWhen station is supplying phantom current the Link Signal is active.
When there is no phantom current the Link Signal is inactive.ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.3.1.1 |
stationPortLinkStateTimeThe amount of in seconds which have elapsed since the station port
last changed state. Note: setting this to zero will clear the time.rw INTEGER .1.3.6.1.4.1.52.1.2.2.4.3.1.2 |
ringP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3.2 |
ringPortLinkStatusReports the link state of a ring port.roobsolete Enumeration .1.3.6.1.4.1.52.1.2.2.4.3.2.1 |
ringPortLinkStateTimeReports the time (in seconds) since the ring port's link
state changed.rwobsolete INTEGER .1.3.6.1.4.1.52.1.2.2.4.3.2.2 |
ringPort2 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3.3 |
commonRP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3.3.1 |
commonRPcapabilitiesThis object returns a code indicating that the queried ring port
is nonautowrap, autowrap or selectable.ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.3.3.1.1 |
autowrapRP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3.3.2 |
autowrapRPFaultStatusThis object reports the wire fault of an autowrappable ring port.ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.3.3.2.1 |
autowrapRPFaultStateTimeThis object reports the amount of time in time ticks since the ring
port fault state last changed. Writing zero to this object resets
the time. If a zero is read, it means either zero time ticks have
passed or the ring port is nonautowrap.rw INTEGER .1.3.6.1.4.1.52.1.2.2.4.3.3.2.2 |
autowrapRPSelectedTypeThis object indicates the media type of the indicated ring port on
some boards. Some boards provide both STP and fiber optic ring ports.
The unselectable value will return an error if set. A set of STP or FO
for a non-selectable ring port will not do anything, i.e. the status
of normal is returned.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.3.3.2.3 |
autowrapRPPhantomCurrentThis object tells the board to turn on phantom current for the ring
port and look for wire faults. NoPhantomAvailable will return an
error if set. A set of activatePhantom or deactivatePhantom for a
non-autowrap ring port will not do anything, i.e. the status of
normal is returned.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.3.3.2.4 |
fDDIP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.4 |
fNB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.1.1 |
connectedLeftThe Connected Left board (board n + 1) has the following states:
Detached == 1 (Management (only management) detached,
read/write).
Attached == 2 (Management/AutoMode attached, read/write).
Faulted == 3 (Management/AutoMode tried to attach but
failed READ ONLY).rw Enumeration .1.3.6.1.4.1.52.1.6.1.1.1 |
connectedRightThe Connected Right board (board n - 1) has the following states:
Detached == 1 (Management (only management) detached,
read/write).
Attached == 2 (Management/AutoMode attached, read/write ).
Faulted == 3 (Management/AutoMode tried to attach but
failed READ ONLY).rw Enumeration .1.3.6.1.4.1.52.1.6.1.1.2 |
boardBypassStateThis object indicates that the board is in the bypassed state
when it is ON. Bypassed means the board is NOT attached to the
FNB.rw Enumeration .1.3.6.1.4.1.52.1.6.1.1.3 |