IEEE8023-DOT3-LLDP-EXT-V2-MIB
AI MIB Summary
The IEEE8023-DOT3-LLDP-EXT-V2-MIB extends Link Layer Discovery Protocol (LLDP) management to monitor IEEE 802.3-specific, organizationally defined TLVs for network interface status, power allocation, and media capabilities on compliant switches and endpoints. It enables the retrieval of vendor-specific operational metrics and configuration parameters that standard LLDP MIBs do not cover, facilitating granular troubleshooting of Layer 2 adjacency and physical link attributes.
The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information.
Main OID:
ieee8023lldpV2Xdot3MIB.1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5
75
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
75 total| Object Name |
|---|
ieee8023lldpV2Xdot3MIBThe LLDP Management Information Base extension module for
IEEE 802.3 organizationally defined discovery information. MODULE-IDENTITY .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5 |
lldpV2Xdot3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1 |
lldpV2Xdot3Config OBJECT IDENTIFIER .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.1 |
lldpV2Xdot3PortConfigTableA table that controls selection of LLDP TLVs to be transmitted
on individual ports. SEQUENCE OF LldpV2Xdot3PortConfigEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.1.1 |
lldpV2Xdot3PortConfigEntryLLDP configuration information that controls the
transmission of IEEE 802.3 organizationally defined TLVs on
LLDP transmission capable ports.
This configuration object augments the lldpV2PortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpV2PortConfigEntry
entry.
Each active lldpV2Xdot3PortConfigEntry is restored from non-volatile
storage (along with the corresponding lldpV2PortConfigEntry)
after a re-initialization of the management system. LldpV2Xdot3PortConfigEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.1.1.1 |
lldpV2Xdot3PortConfigTLVsTxEnableThe lldpV2Xdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed by the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an IEEE 802.3 subtype associated with a specific IEEE
802.3 optional TLV.
The bit 'macPhyConfigStatus(0)' indicates that the LLDP agent
should transmit 'MAC/PHY configuration/status TLV'.
The bit 'powerViaMDI(1)' indicates that the LLDP agent should
transmit 'Power via MDI TLV'.
The bit 'unused(2)' is no longer used; this was used for
the 'Link Aggregation TLV' in the previous version.
The bit 'maxFrameSize(3)' indicates that the LLDP agent should
transmit 'Maximum-frame-size TLV'.
The default value for lldpV2Xdot3PortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Bits .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.1.1.1.1 |
lldpV2Xdot3LocalData OBJECT IDENTIFIER .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2 |
lldpV2Xdot3LocPortTableThis table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpV2Xdot3LocPortEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.1 |
lldpV2Xdot3LocPortEntryInformation about a particular port component. LldpV2Xdot3LocPortEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.1.1 |
lldpV2Xdot3LocPortAutoNegSupportedThe truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.1.1.1 |
lldpV2Xdot3LocPortAutoNegEnabledThe truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.1.1.2 |
lldpV2Xdot3LocPortAutoNegAdvertisedCapThis object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system.ro OCTET STRING .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.1.1.3 |
lldpV2Xdot3LocPortOperMauTypeAn integer value that indicates the operational MAU type
of the given port on the local system.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed
in Clause 13 and is equal to the last number in the
respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field is 29. For MAU types not listed in Clause 13,
the value of this field shall be set to zero.ro Unsigned32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.1.1.4 |
lldpV2Xdot3LocPowerTableThis table contains one row per port of power Ethernet
information (as a part of the LLDP IEEE 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpV2Xdot3LocPowerEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2 |
lldpV2Xdot3LocPowerEntryInformation about a particular port component. LldpV2Xdot3LocPowerEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1 |
lldpV2Xdot3LocPowerPortClassThe value that identifies the port Class of the given port
associated with the local system.ro LldpV2PowerPortClass (LLDP-V2-TC-MIB) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.1 |
lldpV2Xdot3LocPowerMDISupportedThe truth value used to indicate whether the MDI power is
supported on the given port associated with the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.2 |
lldpV2Xdot3LocPowerMDIEnabledThe truth value used to identify whether MDI power is
enabled on the given port associated with the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.3 |
lldpV2Xdot3LocPowerPairControlableThe truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in
Clause 8) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.4 |
lldpV2Xdot3LocPowerPairsThis object contains the value of the pethPsePortPowerPairs
object (defined in Clause 8) which is associated with
the given port on the local system.ro Unsigned32(1|2) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.5 |
lldpV2Xdot3LocPowerClassThis object contains the value of the
pethPsePortPowerClassifications object (defined in
Clause 8) which is associated with the given port on the
local system.ro Unsigned32(1|2|3|4|5) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.6 |
lldpV2Xdot3LocPowerTypeA GET returns an integer indicating whether the local
system is a PSE or a PD and whether it is Type 1 or Type 2.ro Enumeration .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.7 |
lldpV2Xdot3LocPowerSourceA GET returns an integer indicating the power sources of the
local system. A PSE indicates whether it is being powered by
a primary power source; a backup power source; or unknown. A PD
indicates whether it is being powered by a PSE and locally;
by a PSE only; or unknown.ro Enumeration .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.8 |
lldpV2Xdot3LocPowerPriorityA GET returns the priority of a PD system. For a PSE, this
is the priority that the PSE assigns to the PD. For a PD, this
is the priority that the PD requests from the PSE. A SET
operation changes the priority of the PD system to the indicated
value.rw Enumeration .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.9 |
lldpV2Xdot3LocPDRequestedPowerValueA GET returns the PD requested power value.
For a PD, it is the power value that the PD has currently
requested from the remote system. PD requested power value
is the maximum input average power the PD ever draws under
this power allocation if accepted. For a PSE, it is the power
value that the PSE mirrors back to the remote system. This is
the PD requested power value that was used by the PSE to compute
the power it has currently allocated to the remote system.
The PD requested power value is encoded according to
IEEE Std 802.3 Equation (79?1), where X is the decimal value of
aLldpXdot3LocPDRequestedPowerValue.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.10 |
lldpV2Xdot3LocPSEAllocatedPowerValueA GET returns the PSE allocated power value.
For a PSE, it is the power value that the PSE has currently
allocated to the remote system. The PSE allocated power value
is the maximum input average power that the PSE wants the PD
to ever draw under this allocation if it is accepted. For a PD,
it is the power value that the PD mirrors back to the remote
system. This is the PSE allocated power value that was used by
the PD to compute the power that it has currently requested from
the remote system. The PSE allocated power value is encoded
according to IEEE Std 802.3 Equation (79?2), where X is the
decimal value of aLldpXdot3LocPSEAllocatedPowerValue.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.11 |
lldpV2Xdot3LocResponseTimeA GET returns the response time in seconds of the local system.
For a PD, it is the maximum time required to update the value of
lldpV2Xdot3LocPDRequestedPowerValue when the remote system
requests the PD to change its max power draw. For a PSE, it is
the maximum time required to update the value of
lldpV2Xdot3LocPDRequestedPowerValue when the remote system
requests of the PSE a new power value.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.12 |
lldpV2Xdot3LocReadyThe truth value used to identify whether the local Data Link Layer
classification engine has completed initialization and is ready to
receive and transmit LLDPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.13 |
lldpV2Xdot3LocReducedOperationPowerValueA GET returns the reduced operation power value. For a PD, it
is a power value that is lower than the currently requested
power value. This reduced operation power value represents a
power state in which the PD could continue to operate, but with
less functionality than at the current PD requested power value.
The PSE could optionally use this information in the event that
the PSE subsequently requests a lower PD power value than the
PD requested power value. For a PSE, it is a power value that the
PSE could ask the PD to move to if the PSE wants the PD to move
to a lower power state. The definition and encoding of PD
requested power value is the same as described in
lldpV2Xdot3LocPDRequestedPowerValue. The default value for this
field is the hexadecimal value FFFFro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.2.1.14 |
lldpV2Xdot3LocMaxFrameSizeTableThis table contains one row per port of maximum frame
size information (as a part of the LLDP IEEE 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpV2Xdot3LocMaxFrameSizeEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.3 |
lldpV2Xdot3LocMaxFrameSizeEntryMaximum Frame Size information about a particular port
component. LldpV2Xdot3LocMaxFrameSizeEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.3.1 |
lldpV2Xdot3LocMaxFrameSizeAn integer value indicating the maximum supported frame
size in octets on the given port of the local system.ro Unsigned32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.3.1.1 |
lldpV2Xdot3LocEEETableThis table contains one row per port of Energy Efficient Ethernet
information (as a part of the LLDP IEEE 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpV2Xdot3LocEEEEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.4 |
lldpV2Xdot3LocEEEEntryInformation about a particular port component. LldpV2Xdot3LocEEEEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.4.1 |
lldpV2Xdot3LocTxTwSysA GET returns the value of Tw_sys_tx that the local system
can support in the transmit direction.
This object maps to the variable LocTxSystemValue as defined
in IEEE Std 802.3 78.4.2.3.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.4.1.1 |
lldpV2Xdot3LocTxTwSysEchoA GET returns the value of Tw_sys_tx that the remote system is
advertising that it can support in the transmit direction and is
echoed by the local system under the control of the EEE DLL receiver
state diagram. This object maps to the variable
LocTxSystemValueEcho as defined in IEEE Std 802.3 78.4.2.3ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.4.1.2 |
lldpV2Xdot3LocRxTwSysA GET returns the value of Tw_sys_tx that
the local system is requesting in the receive direction.
This object maps to the variable LocRxSystemValue as
defined in IEEE Std 802.3 78.4.2.3.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.4.1.3 |
lldpV2Xdot3LocRxTwSysEchoA GET returns the value of Tw_sys_tx that
the remote system is advertising that it is requesting in the
receive direction and is echoed by the local system under the
control of the EEE DLL transmitter state diagram. This object
maps to the variable LocRxSystemValueEcho as defined in
IEEE Std 802.3 78.4.2.3.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.4.1.4 |
lldpV2Xdot3LocFbTwSysA GET returns the value of the fallback Tw_sys_tx
that the local system is advertising to the remote system.
This object maps to the variable LocFbSystemValue as defined
in IEEE Std 802.3 78.4.2.3.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.4.1.5 |
lldpV2Xdot3TxDllReadyThe truth value used to identify whether the local Data Link Layer
EEE layer management function has completed initialization and
is ready to receive and transmit LLDPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.4.1.6 |
lldpV2Xdot3RxDllReadyThe truth value used to identify whether the local Data Link Layer
EEE layer management function has completed initialization and
is ready to receive and transmit LLDPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.4.1.7 |
lldpV2Xdot3LocDllEnabledThe truth value used to identify whether the local system has
completed auto-negotiation with a link partner that has
indicated at leat one EEE capability.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.2.4.1.8 |
lldpV2Xdot3RemoteData OBJECT IDENTIFIER .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3 |
lldpV2Xdot3RemPortTableThis table contains Ethernet port information (as a part
of the LLDP IEEE 802.3 organizational extension) of the remote
system. SEQUENCE OF LldpV2Xdot3RemPortEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.1 |
lldpV2Xdot3RemPortEntryInformation about a particular physical network connection. LldpV2Xdot3RemPortEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.1.1 |
lldpV2Xdot3RemPortAutoNegSupportedThe truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.1.1.1 |
lldpV2Xdot3RemPortAutoNegEnabledThe truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.1.1.2 |
lldpV2Xdot3RemPortAutoNegAdvertisedCapThis object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system.ro OCTET STRING .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.1.1.3 |
lldpV2Xdot3RemPortOperMauTypeAn integer value that indicates the operational MAU type
of the sending device.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in Clause 13 and is equal to the last number in
the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field is 29. For MAU types not listed in Clause 13,
the value of this field shall be set to zero.ro Unsigned32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.1.1.4 |
lldpV2Xdot3RemPowerTableThis table contains Ethernet power information (as a part
of the LLDP IEEE 802.3 organizational extension) of the remote
system. SEQUENCE OF LldpV2Xdot3RemPowerEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2 |
lldpV2Xdot3RemPowerEntryInformation about a particular physical network connection. LldpV2Xdot3RemPowerEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1 |
lldpV2Xdot3RemPowerPortClassThe value that identifies the port Class of the given port
associated with the remote system.ro LldpV2PowerPortClass (LLDP-V2-TC-MIB) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.1 |
lldpV2Xdot3RemPowerMDISupportedThe truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.2 |
lldpV2Xdot3RemPowerMDIEnabledThe truth value used to identify whether MDI power is
enabled on the given port associated with the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.3 |
lldpV2Xdot3RemPowerPairControlableThe truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in
Clause 8) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.4 |
lldpV2Xdot3RemPowerPairsThis object contains the value of the pethPsePortPowerPairs
object (defined in Clause 8) which is associated with
the given port on the remote system.ro Unsigned32(1|2) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.5 |
lldpV2Xdot3RemPowerClassThis object contains the value of the
pethPsePortPowerClassifications object (defined in
Clause 8) which is associated with the given port on the
remote system.ro Unsigned32(1|2|3|4|5) .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.6 |
lldpV2Xdot3RemPowerTypeA GET returns an integer indicating whether the remote
system is a PSE or a PD and whether it is Type 1 or Type 2.ro Enumeration .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.7 |
lldpV2Xdot3RemPowerSourceA GET returns an integer indicating the power sources of the
remote system. When the remote system is a PSE, it indicates
whether it is being powered by a primary power source; a backup
power source; or unknown. When the remote system is a PD, it
indicates whether it is being powered by a PSE and locally;
locally only; by a PSE only; or unknown.ro Enumeration .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.8 |
lldpV2Xdot3RemPowerPriorityA GET returns the priority of a PD system. For a PSE, this
is the priority that the remote system requests. For a PD, this
is the priority that the remote system has assigned.rw Enumeration .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.9 |
lldpV2Xdot3RemPDRequestedPowerValueA GET returns the PD requested power value that was used
by the remote system to compute the power value that is has
currently allocated to the PD. For a PSE, it is the PD requested
power value received from the remote system. The definition and
encoding of PD requested power value is the same as described in
lldpV2Xdot3LocPDRequestedPowerValue.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.10 |
lldpV2Xdot3RemPSEAllocatedPowerValueA GET returns the PSE allocated power value
received from the remote system. For a PSE, it is the PSE allocated
power value that was used by the remote system to compute the power
value that it has currently requested from the PSE. For a PD, it
is the PSE allocated power value received from the remote system.
The definition and encoding of PSE allocated power value is
the same as described in lldpV2Xdot3LocPSEAllocatedPowerValue.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.2.1.11 |
lldpV2Xdot3RemMaxFrameSizeTableThis table contains one row per port/destination
address pair of maximum frame
size information (as a part of the LLDP IEEE 802.3
organizational extension) of the remote system. SEQUENCE OF LldpV2Xdot3RemMaxFrameSizeEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.3 |
lldpV2Xdot3RemMaxFrameSizeEntryMaximum Frame Size information about a particular port
component. LldpV2Xdot3RemMaxFrameSizeEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.3.1 |
lldpV2Xdot3RemMaxFrameSizeAn integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system.ro Unsigned32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.3.1.1 |
lldpV2Xdot3RemEEETableThis table contains one row per port of Energy Efficient Ethernet
information (as a part of the LLDP IEEE 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpV2Xdot3RemEEEEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.4 |
lldpV2Xdot3RemEEEEntryInformation about a particular port component. LldpV2Xdot3RemEEEEntry .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.4.1 |
lldpV2Xdot3RemTxTwSysA GET returns the value of Tw_sys_tx that the remote system
can support in the transmit direction.
This object maps to the variable RemTxSystemValue as defined
in IEEE Std 802.3 78.4.2.3.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.4.1.1 |
lldpV2Xdot3RemTxTwSysEchoA GET returns the value of Tw_sys_tx that the local system is
advertising that it can support in the transmit direction as
echoed by the remote system under the control of the EEE DLL receiver
state diagram. This object maps to the variable
RemTxSystemValueEcho as defined in IEEE Std 802.3 78.4.2.3ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.4.1.2 |
lldpV2Xdot3RemRxTwSysA GET returns the value of Tw_sys_tx that
the remote system is requesting in the receive direction.
This object maps to the variable RemRxSystemValue as
defined in IEEE Std 802.3 78.4.2.3.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.4.1.3 |
lldpV2Xdot3RemRxTwSysEchoA GET returns the value of Tw_sys_tx that
the local system is advertising that it is requesting in the
receive direction and is echoed by the remote system under the
control of the EEE DLL transmitter state diagram. This object
maps to the variable RemRxSystemValueEcho as defined in
IEEE Std 802.3 78.4.2.3.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.4.1.4 |
lldpV2Xdot3RemFbTwSysA GET returns the value of the fallback Tw_sys_tx
that the remote system is advertising.
This object maps to the variable RemFbSystemValue as defined
in IEEE Std 802.3 78.4.2.3.ro Integer32 .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.1.3.4.1.5 |
lldpV2Xdot3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.2 |
lldpV2Xdot3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.2.1 |
lldpV2Xdot3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.42359.2.2.1.2.111.2.lan-man-stds(802)ieee802dot3(3).1.5.2.2 |