IEEE8021-TSN-REMOTE-MANAGEMENT-MIB
AI MIB Summary
The IEEE8021-TSN-REMOTE-MANAGEMENT-MIB enables remote monitoring and configuration of Time-Sensitive Networking (TSN) stream reservation parameters, including bandwidth allocation, latency bounds, and traffic class priorities, on IEEE 802.1Q-compliant bridge devices. This module facilitates the management of deterministic network performance metrics required for real-time industrial and automotive applications by exposing specific TSN capability and status objects.
The Bridge MIB module for managing devices that support the IEEE Std 802.1Q Stream Reservation Protocol Enhancements and Performance Improvements.
Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q.
Copyright (C) IEEE (2018). This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
Main OID:
ieee8021TsnRemoteMgmtMib.1.3.111.2.802.1.1.32
32
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
ieee8021TsnRemoteMgmtMibThe Bridge MIB module for managing devices that support
the IEEE Std 802.1Q Stream Reservation Protocol Enhancements
and Performance Improvements.
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q.
Copyright (C) IEEE (2018).
This version of this MIB module is part of IEEE802.1Q;
see the draft itself for full legal notices. MODULE-IDENTITY .1.3.111.2.802.1.1.32 |
ieee8021TsnRemoteMgmtNotifications OBJECT IDENTIFIER .1.3.111.2.802.1.1.32.0 |
ieee8021TsnRemoteMgmtObjects OBJECT IDENTIFIER .1.3.111.2.802.1.1.32.1 |
ieee8021TsnRemoteMgmtBridgeDelay OBJECT IDENTIFIER .1.3.111.2.802.1.1.32.1.1 |
ieee8021TsnRemoteMgmtBridgeDelayTableA table containing a set of parameters necessary to
determine the delay of frames as they pass through the
Bridge's relay.
There is one Bridge Delay managed object per Port pair of
a Bridge component. The Port pair consists of three indices,
an ingress Port followed by an egress Port and a traffic
class associated with the Port pair. SEQUENCE OF Ieee8021TsnRemoteMgmtBridgeDelayEntry .1.3.111.2.802.1.1.32.1.1.1 |
ieee8021TsnRemoteMgmtBridgeDelayEntryA list of objects containing information necessary to
determine the delay of frames as they pass through the
Bridge's relay. Ieee8021TsnRemoteMgmtBridgeDelayEntry .1.3.111.2.802.1.1.32.1.1.1.1 |
ieee8021TsnRemoteMgmtBridgeIngressPort... IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.32.1.1.1.1.1 |
ieee8021TsnRemoteMgmtBridgeEgressPort... IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.32.1.1.1.1.2 |
ieee8021TsnRemoteMgmtIndependentDelayMinThis attribute provides the minimum delay independent
from frame length for a frame to forward from ingress
port to egress port.
The delay begins when the message timestamp point of the
ingress frame passes the reference plane marking the
boundary between the network media and PHY. The delay
ends when the message timestamp point of the egress
frame passes the reference plane marking the boundary
between the network media and PHY. The message timestamp
point is specified by IEEE Std 802.1AS for various media,
near the start of the frame.
Note: This delay includes all aspects of length-independent
delay for a frame that is forwarded, including handling of
error conditions.ro Unsigned32 .1.3.111.2.802.1.1.32.1.1.1.1.3 |
ieee8021TsnRemoteMgmtIndependentDelayMaxThis attribute provides the maximum delay independent
from frame length for a frame to forward from ingress
port to egress port.
The delay begins when the message timestamp point of
the ingress frame passes the reference plane marking
the boundary between the network media and PHY. The delay
ends when the message timestamp point of the egress frame
passes the reference plane marking the boundary between
the network media and PHY. The message timestamp point is
specified by IEEE Std 802.1AS for various media, near the
start of the frame.ro Unsigned32 .1.3.111.2.802.1.1.32.1.1.1.1.4 |
ieee8021TsnRemoteMgmtDependentDelayMinThis attribute provides the minimum length-dependent
delay from ingress port to egress port.
It provides the portion of delay that is dependent on
frame length, where frame length is the number of octets
that transfer across the MAC Service interfaces. Each
length-dependent delay attribute specifies the time for
a single octet of the frame to transfer from ingress
to egress.ro Unsigned32 .1.3.111.2.802.1.1.32.1.1.1.1.5 |
ieee8021TsnRemoteMgmtDependentDelayMaxThis attribute provides the maximum length-dependent
delay from ingress port to egress port.
It provides the portion of delay that is dependent on
frame length, where frame length is the number of octets
that transfer across the MAC Service interfaces. Each
length-dependent delay attribute specifies the time for
a single octet of the frame to transfer from ingress
to egress.ro Unsigned32 .1.3.111.2.802.1.1.32.1.1.1.1.6 |
ieee8021TsnRemoteMgmtPropagationDelay OBJECT IDENTIFIER .1.3.111.2.802.1.1.32.1.2 |
ieee8021TsnRemoteMgmtPropagationDelayTableA table containing a set of parameters necessary to
determine the delay along the network media (e.g. cable)
for a frame transmitted from the specifed Port of this
Bridge to the neighboring Port on a different Bridge.
There is one Propagation Delay managed object per
egress Port of a Bridge. SEQUENCE OF Ieee8021TsnRemoteMgmtPropagationDelayEntry .1.3.111.2.802.1.1.32.1.2.1 |
ieee8021TsnRemoteMgmtPropagationDelayEntryA list of objects containing information necessary to
determine the delay along the network media (e.g. cable)
for a frame transmitted from the specifed Port of this
Bridge to the neighboring Port on a different Bridge. Ieee8021TsnRemoteMgmtPropagationDelayEntry .1.3.111.2.802.1.1.32.1.2.1.1 |
ieee8021TsnRemoteMgmtTxPropagationDelayThis attribute provides the transmission propagation delay.
The propagation delay begins when the message timestamp
point of an egress frame passes the reference plane marking
the boundary between the network media and PHY. It ends
when the message timestamp point of an ingress frame on the
neighboring Bridge's Port passes the reference plane marking
the boundary between the network media and PHY. The message
timestamp point is specified by IEEE Std 802.1AS for
various media.ro Unsigned32 .1.3.111.2.802.1.1.32.1.2.1.1.1 |
ieee8021TsnRemoteMgmtStaticTrees OBJECT IDENTIFIER .1.3.111.2.802.1.1.32.1.3 |
ieee8021TsnRemoteMgmtStaticTreesSupportedThis attribute is used by the TSN CNC to determine that
TE-MSTID is supported by the Bridge.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.32.1.3.1 |
ieee8021TsnRemoteMgmtMrpExternalControl OBJECT IDENTIFIER .1.3.111.2.802.1.1.32.1.4 |
ieee8021TsnRemoteMgmtMsrpMrpExternalControlTableA table containing a set of parameters necessary for
a network manager to 1) disable MRP attribute propagation (MAP)
for the MRP Participant of a bridge port, 2) read MRP attribute
registrations that the MRP Participant receives, and 3) write
MRP attribute values for the MRP Participant to declare. SEQUENCE OF Ieee8021TsnRemoteMgmtMsrpMrpExternalControlEntry .1.3.111.2.802.1.1.32.1.4.1 |
ieee8021TsnRemoteMgmtMsrpMrpExternalControlEntryA list of objects necessary for a network manager to
1) disable MRP attribute propagation (MAP) for the
MRP Participant of a bridge port, 2) read MRP attribute
registrations that the MRP Participant receives, and 3) write
MRP attribute values for the MRP Participant to declare. Ieee8021TsnRemoteMgmtMsrpMrpExternalControlEntry .1.3.111.2.802.1.1.32.1.4.1.1 |
ieee8021TsnRemoteMgmtMsrpMrpExternalControlThis attribute is used to indicate, whether MRP
attributes are propagated on the MRP Participant,
according to the specifications for MRP Attribute
Propagation (MAP) and specifications of the
MRP Application. When true(1), the MRP Participant is
removed from the MRP Application's MAP Context. The
MRP Participant performs all other aspects of MRP,
including MRP operation, MRP specifications, and
MRPDU encodings. The application component stores MAD
indications for registration received on the Port,
and invokes MAD requests for declarations on the Port.
When false(2), MRP attributes propagate on the
MRP Participant according to the specifications for
MRP Attribute Propagation (MAP) and specifications of
the MRP Application. Ports with the externalControl
attribute false(2) are considered as candidates for
the MRP Application's MAP Context. The remaining
attributes of this subtree are ignored by Ports with
the externalControl attribute false(2).
This managed object applies to the MSRP application.
A table is provided for each MAP Context (VLAN ID).rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.32.1.4.1.1.1 |
ieee8021TsnRemoteMgmtMrpIndicationListThis attribute is used to store the list of all joined
MRP attributes for the MRP Participant when the
ieee8021TsnRemoteMgmtMrpExternalControl attribute is
true(1). When the ieee8021TsnRemoteMgmtMrpExternalControl
attribute is false(2), this attribute is ignored by the
MRP Participant, and returns the empty octet string.ro OCTET STRING .1.3.111.2.802.1.1.32.1.4.1.1.2 |
ieee8021TsnRemoteMgmtMrpIndicationListLengthThis attribute is used to provide the number of octets
in the ieee8021TsnRemoteMgmtMrpIndicationListLength
attribute. When the ieee8021TsnRemoteMgmtMrpExternalControl
attribute is false(2), this attribute returns zero.ro Unsigned32 .1.3.111.2.802.1.1.32.1.4.1.1.3 |
ieee8021TsnRemoteMgmtMrpIndicationChangeCounterThis attribute is used to provide the number of changes
done to the ieee8021TsnRemoteMgmtMrpIndicationList. When
the ieee8021TsnRemoteMgmtMrpExternalControl attribute is
false(2), this attribute returns zero.ro Counter64 .1.3.111.2.802.1.1.32.1.4.1.1.4 |
ieee8021TsnRemoteMgmtMrpAdminRequestListThis attribute is used to provide the administrative
value of the current list of MAD requests for the
MRP Participant (operRequestList). Each entry in this
attribute is encoded as the attribute_type parameter as
a single octet, followed by the length of the
attribute_value parameter as a single octet, followed
by a sequence of octets for the attribute_value parameter.
When the ieee8021TsnRemoteMgmtMrpExternalControl attribute
is true(1), this attribute is copied to the
ieee8021TsnRemoteMgmtMrpOperRequestList attribute as soon
as possible according to the implementation. When the
ieee8021TsnRemoteMgmtMrpExternalControl attribute is
false(2), this attribute is ignored by the MRP Participant,
but it retains its value.ro OCTET STRING .1.3.111.2.802.1.1.32.1.4.1.1.5 |
ieee8021TsnRemoteMgmtMrpAdminRequestListLengthThis attribute is used to provide the administrative
value for the number of octets in the
ieee8021TsnRemoteMgmtMrpAdminRequestList attribute.
When the ieee8021TsnRemoteMgmtMrpExternalControl attribute
is true(1), this attribute is copied to the
ieee8021TsnRemoteMgmtMrpOperRequestListLength attribute at
the same time that the ieee8021TsnRemoteMgmtMrpAdminRequestList
attribute is copied to the ieee8021TsnRemoteMgmtMrpOperRequestList
attribute. When the ieee8021TsnRemoteMgmtMrpExternalControl
attribute is false(2), this attribute is ignored by the
MRP Participant, but it retains its value.ro Unsigned32 .1.3.111.2.802.1.1.32.1.4.1.1.6 |
ieee8021TsnRemoteMgmtMrpOperRequestListThis attribute is used to proivde the operational value
of the current list of MAD requests for the MRP Participant.ro OCTET STRING .1.3.111.2.802.1.1.32.1.4.1.1.7 |
ieee8021TsnRemoteMgmtMrpOperRequestListLengthThis attribute is used to provide the operational value
of the ieee8021TsnRemoteMgmtMrpAdminRequestListLength
attribute, and it is copied at the same time that
ieee8021TsnRemoteMgmtMrpAdminRequestList attribute is
copied to ieee8021TsnRemoteMgmtMrpOperRequestList.ro Unsigned32 .1.3.111.2.802.1.1.32.1.4.1.1.8 |
ieee8021TsnRemoteMgmtConformance OBJECT IDENTIFIER .1.3.111.2.802.1.1.32.2 |
ieee8021TsnRemoteMgmtCompliances OBJECT IDENTIFIER .1.3.111.2.802.1.1.32.2.1 |
ieee8021TsnRemoteMgmtGroups OBJECT IDENTIFIER .1.3.111.2.802.1.1.32.2.2 |