Hub-rptr-prvt
Detailed view of the defined objects, syntax rules, and hierarchical paths.
78
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
78 total| Object Name |
|---|
private OBJECT IDENTIFIER .1.3.6.1.4 |
IMPORTS Unknown .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
fibronics OBJECT IDENTIFIER .1.3.6.1.4.1.22 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.22.101 |
mibseth-rptrs OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.8 |
xrptrGroupPortStatusIssued when a port changes its status TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.1 |
xrptrGroupJabberFaultStatusIssued when a port enters the jabber lock state TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.2 |
xrptrGroupCPUBlockFaultStatusIssued when a CPU or block error is detected TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.3 |
xrptrGrpPortAutoPartitionStatusIssued when a port is auto partitioned TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.4 |
xrptrGroupPortLinkStatusIssued when the link status of a port
changes TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.6 |
xrptrDetachNmsPortIssued when the port connected to the NMS
is not detached by a detach command received
from the NMS TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.7 |
xrptrGrpHead1BackupMainActiveIndicates that the MAIN link is active TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.8 |
xrptrGrpHead1BackupSecondActiveIndicates that the SECOND link is active TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.9 |
xrptrDetachEsmIssued when the port connected to the ESM
is not detached by a detach command received
from the NMS TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.10 |
xrptrDetachProtectPortIssued when a protected port is not
detached by a detach command received
from the NMS TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.11 |
xrptrSmCpufaultStatusIssued when a CPU fault is detected
in manager card. For factory use only. TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.12 |
xrptrSmControllerFaultStatusIssued when a Controller fault is detected
in manager card. For factory use only TRAP-TYPE .1.3.6.1.4.1.22.101.8.0.13 |
xrptrinfo OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.8.1 |
xrptrRxDscrptrOverFlowsThis counter reflects the number of the
missed received packets due to lack of resources
such as descriptors or memory buffersro Counter .1.3.6.1.4.1.22.101.8.1.1 |
xrptrTxDscrptrOverFlowsThis counter is incremented every time
there is a transmit overflowro Counter .1.3.6.1.4.1.22.101.8.1.2 |
xrptrMemoryErrorsThis counter is incremented every time
there is a memory errorro Counter .1.3.6.1.4.1.22.101.8.1.3 |
xrptrJabbersThis counter is incremented every time
there is a jabber in one of the ports.ro Counter .1.3.6.1.4.1.22.101.8.1.4 |
xrptrNMSPortReturns the port number which the
NMS is connected to. If an NMS
is not connected to the card
the value returned will be 99.ro INTEGER .1.3.6.1.4.1.22.101.8.1.5 |
xrptrNMSGroupReturns the group number which the
NMS is connected to. If the NMS
is not connected to a card
the value returned will be 99.ro INTEGER .1.3.6.1.4.1.22.101.8.1.6 |
xrptrESMPortReturns the port number which the
GigaHub (ESM) is connected to. If the
GigaHub is not connected to the card
the value returned will be 99.ro INTEGER .1.3.6.1.4.1.22.101.8.1.7 |
xrptrESMGroupReturns the group number which the
GigaHub (ESM) is connected to. If the
GigaHub is not connected to a card
the value returned will be 99.ro INTEGER .1.3.6.1.4.1.22.101.8.1.8 |
xrptrSmCpuErrorCPU Fault status. If
the value is fault-exist(1) - there is a
CPU fault in the repeater manager card.ro Enumeration .1.3.6.1.4.1.22.101.8.1.9 |
xrptrSmControllerErrorController Fault status. If
the value is fault-exist(1) - there is a
fault in the Ethernet control block
of the repeater manager card.ro Enumeration .1.3.6.1.4.1.22.101.8.1.10 |
xrptrgroup OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.8.2 |
xrptrGroupTableTable of entries with global information on each group.
Information or error may stem from one single port in
group, but is displayed as group info/error. SEQUENCE OF XrptrGroupEntry .1.3.6.1.4.1.22.101.8.2.1 |
xrptrGroupEntryEntry per group containing info/errors on the group. XrptrGroupEntry .1.3.6.1.4.1.22.101.8.2.1.1 |
xrptrGroupIndexGroup Numberro INTEGER .1.3.6.1.4.1.22.101.8.2.1.1.1 |
xrptrGroupGlobalStatus8 bytes. 60 status bits of
the card. For more information about
the meaning of the status, read the
specific user manual of each card.
The channel leds are encoded into
2 bytes.ro OCTET STRING .1.3.6.1.4.1.22.101.8.2.1.1.2 |
xrptrGroupPrevStatus8 bytes. Previous 60 status
bits of the card. This
object id is used mainly
for traps (see Card Trap)ro OCTET STRING .1.3.6.1.4.1.22.101.8.2.1.1.3 |
xrptrGroupGlobalErrorGroup Global Fault status. If
the value is fault-exist(1) - there
is a fault in the card.ro Enumeration .1.3.6.1.4.1.22.101.8.2.1.1.4 |
xrptrGroupJabberErrorJabber Fault status. If
the value is fault-exist(1) - there is a
jabber event.ro Enumeration .1.3.6.1.4.1.22.101.8.2.1.1.5 |
xrptrGroupRepeaterCpuBlockErrorRepeater Block Fault status. If
the value is fault-exist(1) - there is a
fault in the repeater block or cpu
block of the repeater card.ro Enumeration .1.3.6.1.4.1.22.101.8.2.1.1.8 |
xrptrGroupAutoPartitionGroup Auto partition Fault status. If
the value is fault-exist(1) - at least one of
the ports is in auto-partition.ro Enumeration .1.3.6.1.4.1.22.101.8.2.1.1.9 |
xrptrGroupDetachStatusGlobal Detach status. If
the value is fault-exist(1) -
at least one of the ports is detached.ro Enumeration .1.3.6.1.4.1.22.101.8.2.1.1.10 |
xrptrGroupGlobalCommandCodeEnable the user to attach/detach all repeater
ports. Note: in case of detach command - all ports
will detach except the port on which the
last NMS message was received.
When reading this object the value returned
is always attach-all-ports(1)rw Enumeration .1.3.6.1.4.1.22.101.8.2.1.1.11 |
xrptrGroupTrapMaskIf this variable is set to mask-info(4)
all traps will be sent.
If this variable is set to mask-warn(3)
only traps with severity WARN or FATAL
will be sent.
If this variable is set to mask-fatal(2)
only traps with severity FATAL will be sent.
If this variable is set to mask-all(1)
then no traps will be sent.rw Enumeration .1.3.6.1.4.1.22.101.8.2.1.1.12 |
xrptrGroupLinkSelectHead1Enable the user to switch between MAIN
and SECOND link only in Head module in
the 342 type cards.rw Enumeration .1.3.6.1.4.1.22.101.8.2.1.1.13 |
xrptrGroupBackupHead1StateAllow the user to enable or disable
the backup port for Head module only
in 342 cards. When set to primary(1)
the active port will be the primary port,
when set to secondary(2) the active port
will be the secondary port and when set
to normal(3) the active port will be set
by the backup algorithm.rw Enumeration .1.3.6.1.4.1.22.101.8.2.1.1.14 |
xrptrGroupMaxModuleNumberMaximum Number of modules in a group.ro INTEGER .1.3.6.1.4.1.22.101.8.2.1.1.15 |
xrptrGroupSlotNumberPhysical slot index of the groupro INTEGER .1.3.6.1.4.1.22.101.8.2.1.1.16 |
xrptrGroupSlotInternalIndexInternal index of the group within its slotro INTEGER .1.3.6.1.4.1.22.101.8.2.1.1.17 |
xrptrGroupFaultTableTable of fault reports per group. SEQUENCE OF XrptrGroupFaultEntry .1.3.6.1.4.1.22.101.8.2.2 |
xrptrGroupFaultEntryEntry of fault information. XrptrGroupFaultEntry .1.3.6.1.4.1.22.101.8.2.2.1 |
xrptrGroupGroupIndexGroup Numberro INTEGER .1.3.6.1.4.1.22.101.8.2.2.1.1 |
xrptrGroupFaultIndexThe fault index in the fault tablero INTEGER .1.3.6.1.4.1.22.101.8.2.2.1.2 |
xrptrGroupFaultReportGet the faults detected by the agentro DisplayString .1.3.6.1.4.1.22.101.8.2.2.1.3 |
xrptrgroupport OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.8.3 |
xrptrGroupPortTableTable of entries with information/errors per port in group. SEQUENCE OF XrptrGroupPortEntry .1.3.6.1.4.1.22.101.8.3.1 |
xrptrGroupPortEntryEntry per port with info/errors.rw XrptrGroupPortEntry .1.3.6.1.4.1.22.101.8.3.1.1 |
xrptrGroupPIndexGroup Numberro INTEGER .1.3.6.1.4.1.22.101.8.3.1.1.1 |
xrptrGroupPortIndexPort Numberro INTEGER .1.3.6.1.4.1.22.101.8.3.1.1.2 |
xrptrGroupPortRcvStatusThis object describes the receive status of the port,
When a port is receiving data the object's
value is receive(1); when the port does not
receive any data the object's value is no-receive(2)ro Enumeration .1.3.6.1.4.1.22.101.8.3.1.1.4 |
xrptrGroupPortLinkFaultsThis counter is incremented every time
a link change is detected in the port.
A link change occurs whenever the link
either goes down or comes up on the portro Counter .1.3.6.1.4.1.22.101.8.3.1.1.5 |
xrptrGroupPortAutoPartitionsThis counter is incremented every time
the port enters the Auto Partition state.ro Counter .1.3.6.1.4.1.22.101.8.3.1.1.6 |
xrptrGroupPortAutoPartitionTypeAuto Partition type.ro Enumeration .1.3.6.1.4.1.22.101.8.3.1.1.7 |
xrptrGroupRPortProtectTableTable of entries regarding status of port protect.
One entry per port, with runtime status.
Setting these objects will prevent detach of port. SEQUENCE OF XrptrGroupRPortProtectEntry .1.3.6.1.4.1.22.101.8.3.2 |
xrptrGroupRPortProtectEntryEntry regarding port runtime protect status.rw XrptrGroupRPortProtectEntry .1.3.6.1.4.1.22.101.8.3.2.1 |
xrptrGroupRPortProtectGrIndexGroup Numberrw INTEGER .1.3.6.1.4.1.22.101.8.3.2.1.1 |
xrptrGroupRPortProtectPortIndexPort Numberrw INTEGER .1.3.6.1.4.1.22.101.8.3.2.1.2 |
xrptrGroupRPortProtectPortStateState of port protection.
If port is protected, a detach
command to this port is rejected.rw Enumeration .1.3.6.1.4.1.22.101.8.3.2.1.3 |
xrptrGroupPPortProtectTableTable of entries regarding status of port protect.
One entry per port, with permanent status.
Set on these objects will prevent detach of port.
Value is saved permanently. SEQUENCE OF XrptrGroupPPortProtectEntry .1.3.6.1.4.1.22.101.8.3.3 |
xrptrGroupPPortProtectEntryEntry regarding port permanent protect status.rw XrptrGroupPPortProtectEntry .1.3.6.1.4.1.22.101.8.3.3.1 |
xrptrGroupPPortProtectGrIndexGroup Numberrw INTEGER .1.3.6.1.4.1.22.101.8.3.3.1.1 |
xrptrGroupPPortProtectPortIndexPort Numberrw INTEGER .1.3.6.1.4.1.22.101.8.3.3.1.2 |
xrptrGroupPPortProtectPortStateState of port protection.
If port is protected, a detach
command to this port is rejected.rw Enumeration .1.3.6.1.4.1.22.101.8.3.3.1.3 |
xrptrgroupmodule OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.8.4 |
xrptrGroupModuleTableTable of entries regarding port modules in group. SEQUENCE OF XrptrGroupModuleEntry .1.3.6.1.4.1.22.101.8.4.1 |
xrptrGroupModuleEntryEntry per group, per module, describing module.rw XrptrGroupModuleEntry .1.3.6.1.4.1.22.101.8.4.1.1 |
xrptrGroupMIndexGroup Numberro INTEGER .1.3.6.1.4.1.22.101.8.4.1.1.1 |
xrptrGroupModuleIndexModule Numberro INTEGER .1.3.6.1.4.1.22.101.8.4.1.1.2 |
xrptrGroupModuleStructInfoList of module numbers:
em350 /* BLANK */
em351 /* FO single port */
em352 /* FO dual port */
em353 /* COAX single port */
em354 /* COAX dual port */
em357 /* DTE */
em356 /* 10BASET dual port */
em359 /* AUI */
em355 /* EB2 */ro Enumeration .1.3.6.1.4.1.22.101.8.4.1.1.3 |
xrptrGroupModuleBackupStateEnable the user to specify the
backup state (enable/disable) for appropriate
EM modules (e.g., em352 FO dual port) installed
in an LC348 card.
This object applies only to the 348 card.
Setting this object will take effect only after
the next reset or power up of the card.rw Enumeration .1.3.6.1.4.1.22.101.8.4.1.1.4 |