FIBRONICS-PROPRIETARY-FX8210-B-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for FIBRONICS-PROPRIETARY-FX8210-B-MIB.
318
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
318 total| Object Name |
|---|
spartacus OBJECT IDENTIFIER .1.3.6.1.4.1.22 |
RFC1155-SMI Unknown .1.3.6.1.4.1.22 |
dec OBJECT IDENTIFIER .1.3.6.1.4.1.22.2 |
decrun OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.1 |
rcircs OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.1.1 |
rCircNumro INTEGER .1.3.6.1.4.1.22.2.1.1.1 |
rccTable SEQUENCE OF RccEntry .1.3.6.1.4.1.22.2.1.1.2 |
rccEntry RccEntry .1.3.6.1.4.1.22.2.1.1.2.1 |
rccIndexro INTEGER .1.3.6.1.4.1.22.2.1.1.2.1.1 |
rccStaterw INTEGER .1.3.6.1.4.1.22.2.1.1.2.1.2 |
rccTypero INTEGER .1.3.6.1.4.1.22.2.1.1.2.1.3 |
rccCostrw INTEGER .1.3.6.1.4.1.22.2.1.1.2.1.4 |
rccBSizero INTEGER .1.3.6.1.4.1.22.2.1.1.2.1.5 |
rccHTimerrw INTEGER .1.3.6.1.4.1.22.2.1.1.2.1.6 |
rccLinero INTEGER .1.3.6.1.4.1.22.2.1.1.2.1.7 |
rbcTable SEQUENCE OF RbcEntry .1.3.6.1.4.1.22.2.1.1.3 |
rbcEntryThe INDEX value specified should correspond to
the index of the circuit of the desired entry. RbcEntry .1.3.6.1.4.1.22.2.1.1.3.1 |
rbcDroutro OCTET STRING .1.3.6.1.4.1.22.2.1.1.3.1.1 |
rbcMroutrw INTEGER .1.3.6.1.4.1.22.2.1.1.3.1.2 |
rbcRprirw INTEGER .1.3.6.1.4.1.22.2.1.1.3.1.3 |
rCCntrs SEQUENCE OF RCCntrEntry .1.3.6.1.4.1.22.2.1.1.4 |
rCCntrEntryThe INDEX value specified should correspond to
the index of the circuit of the desired entry. RCCntrEntry .1.3.6.1.4.1.22.2.1.1.4.1 |
rCCntTePktsInro Counter .1.3.6.1.4.1.22.2.1.1.4.1.1 |
rCCntOPktsOutro Counter .1.3.6.1.4.1.22.2.1.1.4.1.2 |
rCCntTrPktsInro Counter .1.3.6.1.4.1.22.2.1.1.4.1.3 |
rCCntTrPktsOutro Counter .1.3.6.1.4.1.22.2.1.1.4.1.4 |
rCCntAdjDownro Counter .1.3.6.1.4.1.22.2.1.1.4.1.5 |
rnodes OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.1.2 |
rnNmParms OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.1.2.1 |
rnNmIdro OCTET STRING .1.3.6.1.4.1.22.2.1.2.1.1 |
rnNmPaddrro OCTET STRING .1.3.6.1.4.1.22.2.1.2.1.2 |
rnRtParms OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.1.2.2 |
rnRpAMaxCrw INTEGER .1.3.6.1.4.1.22.2.1.2.2.1 |
rnRpAMaxHrw INTEGER .1.3.6.1.4.1.22.2.1.2.2.2 |
rnRpBRtTmrrw INTEGER .1.3.6.1.4.1.22.2.1.2.2.3 |
rnRpBSizerw INTEGER .1.3.6.1.4.1.22.2.1.2.2.4 |
rnRpMAddrrw INTEGER .1.3.6.1.4.1.22.2.1.2.2.5 |
rnRpMArearw INTEGER .1.3.6.1.4.1.22.2.1.2.2.6 |
rnRpMaxBNRrw INTEGER .1.3.6.1.4.1.22.2.1.2.2.7 |
rnRpMaxBRrw INTEGER .1.3.6.1.4.1.22.2.1.2.2.8 |
rnRpMaxCirro INTEGER .1.3.6.1.4.1.22.2.1.2.2.9 |
rnRpMaxCostrw INTEGER .1.3.6.1.4.1.22.2.1.2.2.10 |
rnRpMaxHopsrw INTEGER .1.3.6.1.4.1.22.2.1.2.2.11 |
rnRpMaxVrw INTEGER .1.3.6.1.4.1.22.2.1.2.2.12 |
rnRpVersro OCTET STRING .1.3.6.1.4.1.22.2.1.2.2.13 |
rnRpSegBufro INTEGER .1.3.6.1.4.1.22.2.1.2.2.14 |
rnRpTyperw INTEGER .1.3.6.1.4.1.22.2.1.2.2.15 |
rnRpAddrro OCTET STRING .1.3.6.1.4.1.22.2.1.2.2.16 |
rnRpUseL2Arw INTEGER .1.3.6.1.4.1.22.2.1.2.2.17 |
rnRtCount OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.1.2.3 |
rnRcAgedPktro Counter .1.3.6.1.4.1.22.2.1.2.3.1 |
rnRcUnReachro Counter .1.3.6.1.4.1.22.2.1.2.3.2 |
rnRcBadRangero Counter .1.3.6.1.4.1.22.2.1.2.3.3 |
rnRcOversizero Counter .1.3.6.1.4.1.22.2.1.2.3.4 |
rnRcFormErrro Counter .1.3.6.1.4.1.22.2.1.2.3.5 |
rnRcRtUpLossro Counter .1.3.6.1.4.1.22.2.1.2.3.6 |
rnAdjTbl SEQUENCE OF RnAdjEnt .1.3.6.1.4.1.22.2.1.2.4 |
rnAdjEnt RnAdjEnt .1.3.6.1.4.1.22.2.1.2.4.1 |
rnAdjAddrro OCTET STRING .1.3.6.1.4.1.22.2.1.2.4.1.1 |
rnAdjStatero INTEGER .1.3.6.1.4.1.22.2.1.2.4.1.2 |
rnAdjTypero INTEGER .1.3.6.1.4.1.22.2.1.2.4.1.3 |
rnAdjCIdxro INTEGER .1.3.6.1.4.1.22.2.1.2.4.1.4 |
rnAdjBSizero INTEGER .1.3.6.1.4.1.22.2.1.2.4.1.5 |
rnAdjLTmrro INTEGER .1.3.6.1.4.1.22.2.1.2.4.1.6 |
rnAdjPriro INTEGER .1.3.6.1.4.1.22.2.1.2.4.1.7 |
rnLvl1Tbl SEQUENCE OF RnLvl1Ent .1.3.6.1.4.1.22.2.1.2.5 |
rnLvl1Ent RnLvl1Ent .1.3.6.1.4.1.22.2.1.2.5.1 |
rnLvl1Addrro OCTET STRING .1.3.6.1.4.1.22.2.1.2.5.1.1 |
rnLvl1Cidxro INTEGER .1.3.6.1.4.1.22.2.1.2.5.1.2 |
rnLvl1Costro INTEGER .1.3.6.1.4.1.22.2.1.2.5.1.3 |
rnLvl1Hopsro INTEGER .1.3.6.1.4.1.22.2.1.2.5.1.4 |
rnLvl1Nextro OCTET STRING .1.3.6.1.4.1.22.2.1.2.5.1.5 |
rareas OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.1.3 |
raParmTbl SEQUENCE OF RaParmEntry .1.3.6.1.4.1.22.2.1.3.1 |
raParmEntry RaParmEntry .1.3.6.1.4.1.22.2.1.3.1.1 |
raNumro INTEGER .1.3.6.1.4.1.22.2.1.3.1.1.1 |
raCIdxro INTEGER .1.3.6.1.4.1.22.2.1.3.1.1.2 |
raCostro INTEGER .1.3.6.1.4.1.22.2.1.3.1.1.3 |
raHopsro INTEGER .1.3.6.1.4.1.22.2.1.3.1.1.4 |
raNextro OCTET STRING .1.3.6.1.4.1.22.2.1.3.1.1.5 |
decperm OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.2 |
pcircs OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.2.1 |
pccTable SEQUENCE OF PccEntry .1.3.6.1.4.1.22.2.2.1.1 |
pccEntry PccEntry .1.3.6.1.4.1.22.2.2.1.1.1 |
pccIndexro INTEGER .1.3.6.1.4.1.22.2.2.1.1.1.1 |
pccStaterw INTEGER .1.3.6.1.4.1.22.2.2.1.1.1.2 |
pccCostrw INTEGER .1.3.6.1.4.1.22.2.2.1.1.1.3 |
pccHTimerrw INTEGER .1.3.6.1.4.1.22.2.2.1.1.1.4 |
pbcTable SEQUENCE OF PbcEntry .1.3.6.1.4.1.22.2.2.1.2 |
pbcEntryThe INDEX value specified should correspond to
the index of the circuit of the desired entry. PbcEntry .1.3.6.1.4.1.22.2.2.1.2.1 |
pbcMroutrw INTEGER .1.3.6.1.4.1.22.2.2.1.2.1.1 |
pbcRprirw INTEGER .1.3.6.1.4.1.22.2.2.1.2.1.2 |
pnodes OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.2.2 |
pnRtParms OBJECT IDENTIFIER .1.3.6.1.4.1.22.2.2.2.1 |
pnRpAMaxCrw INTEGER .1.3.6.1.4.1.22.2.2.2.1.1 |
pnRpAMaxHrw INTEGER .1.3.6.1.4.1.22.2.2.2.1.2 |
pnRpBRtTmrrw INTEGER .1.3.6.1.4.1.22.2.2.2.1.3 |
pnRpBSizerw INTEGER .1.3.6.1.4.1.22.2.2.2.1.4 |
pnRpMAddrrw INTEGER .1.3.6.1.4.1.22.2.2.2.1.5 |
pnRpMArearw INTEGER .1.3.6.1.4.1.22.2.2.2.1.6 |
pnRpMaxBNRrw INTEGER .1.3.6.1.4.1.22.2.2.2.1.7 |
pnRpMaxBRrw INTEGER .1.3.6.1.4.1.22.2.2.2.1.8 |
pnRpMaxCostrw INTEGER .1.3.6.1.4.1.22.2.2.2.1.9 |
pnRpMaxHopsrw INTEGER .1.3.6.1.4.1.22.2.2.2.1.10 |
pnRpMaxVrw INTEGER .1.3.6.1.4.1.22.2.2.2.1.11 |
pnRpTyperw INTEGER .1.3.6.1.4.1.22.2.2.2.1.12 |
pnRpAddrrw OCTET STRING .1.3.6.1.4.1.22.2.2.2.1.13 |
pnRpUseL2Arw INTEGER .1.3.6.1.4.1.22.2.2.2.1.14 |
pnRpRstDaddrrw INTEGER .1.3.6.1.4.1.22.2.2.2.1.15 |
pDecDefaultsWhen this object is set to 1, the side effect will
be to cause the unit to reset all the objects
defined under the subtree decperm to their default
values. Reading this object has no meaning. The
integer value 1 will be returned to a get or
get-next request.rw Enumeration .1.3.6.1.4.1.22.2.2.3 |
trap OBJECT IDENTIFIER .1.3.6.1.4.1.22.3 |
traprun OBJECT IDENTIFIER .1.3.6.1.4.1.22.3.1 |
rTrapAddrTblThis table contains runtime information about
destinations to which traps should be directed.
Setting the rTrapAddrState to INACTIVE removes
an entry from the table. SEQUENCE OF RTrapAddrEntry .1.3.6.1.4.1.22.3.1.1 |
rTrapAddrEntryThis object contains runtime information about
an individual trap destination. RTrapAddrEntry .1.3.6.1.4.1.22.3.1.1.1 |
rTrapAddrAddrThe IP address of the network management entity
to which traps (of the type specified in this
table entry) should be sent.rw NetworkAddress .1.3.6.1.4.1.22.3.1.1.1.1 |
rTrapAddrCommCommunity string to be used in SNMP message
generated to the receiving SNMP protocol entity.rw OCTET STRING .1.3.6.1.4.1.22.3.1.1.1.2 |
rTrapAddrVerThe trap address table version number. The
current (and only valid) version number is 1.rw INTEGER .1.3.6.1.4.1.22.3.1.1.1.3 |
rTrapAddrTypeA bit-encoded string, 1 byte in length, which
contains information about which trap(s) should be
directed to the management entity described by
this table entry. The following list identifies
the trap types and corresponding bit values.
TRAP-STANDARD-MIB 1000 0000
TRAP-DIAG 0100 0000
TRAP-GNRL-PROPRIETARY 0010 0000
TRAP-ROUT 0001 0000
TRAP-DEBUG 0000 1000
TRAP-PROP-DEC4 0000 0100rw OCTET STRING .1.3.6.1.4.1.22.3.1.1.1.4 |
rTrapAddrStateThe state of this entry in the trap address
table. Setting this object to INACTIVE
removes the corresponding entry from the
table.rw Enumeration .1.3.6.1.4.1.22.3.1.1.1.5 |
traperm OBJECT IDENTIFIER .1.3.6.1.4.1.22.3.2 |
pTrapAddrTblThis table contains permanent information about
destinations to which traps should be directed.
Setting the pTrapAddrState to INACTIVE removes
an entry from the table. This information is
used to initialize the rTrapAddrTbl on unit
startup. SEQUENCE OF PTrapAddrEntry .1.3.6.1.4.1.22.3.2.1 |
pTrapAddrEntryThis object contains permanent information about
an individual trap destination. PTrapAddrEntry .1.3.6.1.4.1.22.3.2.1.1 |
pTrapAddrAddrThe IP address of the network management entity
to which traps (of the type specified in this
table entry) should be sent.rw NetworkAddress .1.3.6.1.4.1.22.3.2.1.1.1 |
pTrapAddrCommCommunity string to be used in SNMP message
generated to the receiving SNMP protocol entity.rw OCTET STRING .1.3.6.1.4.1.22.3.2.1.1.2 |
pTrapAddrVerThe trap address table version number. The
current (and only valid) version number is 1.rw INTEGER .1.3.6.1.4.1.22.3.2.1.1.3 |
pTrapAddrTypeA bit-encoded string, 1 byte in length, which
contains information about which trap(s) should be
directed to the management entity described by
this table entry. The following list identifies
the trap types and corresponding bit values.
TRAP-STANDARD-MIB 1000 0000
TRAP-DIAG 0100 0000
TRAP-GNRL-PROPRIETARY 0010 0000
TRAP-ROUT 0001 0000
TRAP-DEBUG 0000 1000
TRAP-PROP-DEC4 0000 0100rw OCTET STRING .1.3.6.1.4.1.22.3.2.1.1.4 |
pTrapAddrStateThe state of this entry in the trap address
table. Setting this object to INACTIVE
removes the corresponding entry from the
table.rw INTEGER .1.3.6.1.4.1.22.3.2.1.1.5 |
pTrapDefaultsWhen this object is set to 1, the side effect will
be to cause the unit to reset all the objects
defined under the subtree traperm to their default
values. Reading this object has no meaning. The
integer value 1 will be returned to a get or
get-next request.rw Enumeration .1.3.6.1.4.1.22.3.2.2 |
dec2 OBJECT IDENTIFIER .1.3.6.1.4.1.22.4 |
dec2run OBJECT IDENTIFIER .1.3.6.1.4.1.22.4.1 |
rClParmTbl SEQUENCE OF RClParmEntry .1.3.6.1.4.1.22.4.1.1 |
rClParmEntryThe INDEX value specified should correspond to
the index of the interface of the desired entry. RClParmEntry .1.3.6.1.4.1.22.4.1.1.1 |
rClStaterw INTEGER .1.3.6.1.4.1.22.4.1.1.1.1 |
rClSubStro INTEGER .1.3.6.1.4.1.22.4.1.1.1.2 |
rBlParmTbl SEQUENCE OF RBlParmEntry .1.3.6.1.4.1.22.4.1.2 |
rBlParmEntryThe INDEX value specified should correspond to
the index of the interface of the desired entry. RBlParmEntry .1.3.6.1.4.1.22.4.1.2.1 |
rBlHAddrro OCTET STRING .1.3.6.1.4.1.22.4.1.2.1.1 |
rElCountTbl SEQUENCE OF RElCountEntry .1.3.6.1.4.1.22.4.1.3 |
rElCountEntryThe INDEX value specified should correspond to
the index of the interface of the desired entry. RElCountEntry .1.3.6.1.4.1.22.4.1.3.1 |
rElFrInro Counter .1.3.6.1.4.1.22.4.1.3.1.1 |
rElFrOutro Counter .1.3.6.1.4.1.22.4.1.3.1.2 |
rElBcBInro Counter .1.3.6.1.4.1.22.4.1.3.1.3 |
rElBcFInro Counter .1.3.6.1.4.1.22.4.1.3.1.4 |
rElMcBInro Counter .1.3.6.1.4.1.22.4.1.3.1.5 |
rElMcFInro Counter .1.3.6.1.4.1.22.4.1.3.1.6 |
rElFDefro Counter .1.3.6.1.4.1.22.4.1.3.1.7 |
rElF1Colro Counter .1.3.6.1.4.1.22.4.1.3.1.8 |
rElFMColro Counter .1.3.6.1.4.1.22.4.1.3.1.9 |
rElOutFro Counter .1.3.6.1.4.1.22.4.1.3.1.10 |
rElCDetFro Counter .1.3.6.1.4.1.22.4.1.3.1.11 |
rElInFro Counter .1.3.6.1.4.1.22.4.1.3.1.12 |
rElBadDro Counter .1.3.6.1.4.1.22.4.1.3.1.13 |
rElOvRunro Counter .1.3.6.1.4.1.22.4.1.3.1.14 |
rElNoBufro Counter .1.3.6.1.4.1.22.4.1.3.1.15 |
dec2perm OBJECT IDENTIFIER .1.3.6.1.4.1.22.4.2 |
propSys OBJECT IDENTIFIER .1.3.6.1.4.1.22.5 |
propSysRun OBJECT IDENTIFIER .1.3.6.1.4.1.22.5.1 |
rTodThis is a 15 byte string containing the Greenwich
Mean Time formatted as: YYMMDDHHMMSSUUU,
where:
YY = year
DD = day
HH = hours
MM = minutes
SS = seconds
UUU = microsecondsrw OCTET STRING .1.3.6.1.4.1.22.5.1.1 |
rFddiIfIndexThe snmp Fddi interface Numberro INTEGER .1.3.6.1.4.1.22.5.1.2 |
rPingTableA table of requests for ping via ICMP echo. No
modification of existing table entries is allowed,
only addition of new entries. SEQUENCE OF RPingEntry .1.3.6.1.4.1.22.5.1.3 |
rPingEntryThe list of parameters required to perform a
ping request RPingEntry .1.3.6.1.4.1.22.5.1.3.1 |
rPProtoThe protocol to be used for the ping request.
Future versions will also support Loopback Mirror
and Decnet Circuit Loopback.rw Enumeration .1.3.6.1.4.1.22.5.1.3.1.1 |
rPDestThe network address of the node to ping.rw NetworkAddress .1.3.6.1.4.1.22.5.1.3.1.2 |
rPTimeOutTimeout in seconds to allow for the remote node
to respond.rw INTEGER .1.3.6.1.4.1.22.5.1.3.1.3 |
rPReplyReply to ICMP echo received by agent. NOTE:
Although this object is defined as read-write,
attempting to write any value results in an
error.rw Enumeration .1.3.6.1.4.1.22.5.1.3.1.4 |
rPStateThe state of the entry. When this state is
set to ACTIVE, the appropriate ping request
will be issued by Brouter. A table entry
with a state of INACTIVE is an invalidated
entry and will not be returned to a get
request.rw Enumeration .1.3.6.1.4.1.22.5.1.3.1.5 |
rDebugTableA table of entries used to manage debug reporting
from the Brouter. SEQUENCE OF RDebugEntry .1.3.6.1.4.1.22.5.1.4 |
rDebugEntryVariables needed to maintain the FPP debug
mechanisms. RDebugEntry .1.3.6.1.4.1.22.5.1.4.1 |
rDTaskIdTask-id assigned to the task being debugged.
Task-id`s are assigned as follows:
IP-ID 2
ICMP-ID 3
RIP-ID 4
UDP-ID 6
ARP-ID 7
KSMAP-ID 8
FMAINP-ID 9
SYSTEM-ID 10
PROXY-ARP-ID 11ro INTEGER .1.3.6.1.4.1.22.5.1.4.1.1 |
rDDevStatIndicates whether the development level debug
messages for this module should be reported to
the NMS.rw Enumeration .1.3.6.1.4.1.22.5.1.4.1.2 |
rDRunStatIndicates whether the runtime network diagnostic
messages for this module should be reported to
the NMS.rw Enumeration .1.3.6.1.4.1.22.5.1.4.1.3 |
rUDnldSetting this object to 1 has the side effect of
causing the unit to perform a cold reset.
Reading this object has no meaning. The value 1
is returned in response to a get or get-next
request.rw INTEGER .1.3.6.1.4.1.22.5.1.7 |
rURsetSetting this object to 1 has the side effect of
causing the unit to perform a warm reset.
Reading this object has no meaning. The value 1
is returned in response to a get or get-next
request.rw INTEGER .1.3.6.1.4.1.22.5.1.8 |
rUIpSwIndicates the state of the IP routing feature.
If this switch is turned OFF, IP traffic will
not be routed through the brouter. IP messages
destined for the brouter will be delivered to
the unit's upper layers. This leaves the SNMP
agent accessible to its manager even when IP
routing is de-activated. If bridging is
activated, the IP traffic will be bridged.rw Enumeration .1.3.6.1.4.1.22.5.1.10 |
rUDecSwIndicates the state of the Decnet feature.
If this switch is turned OFF, no Decnet traffic
will be routed through this unit. If bridging is
activated, the Decnet trafic will be bridged.rw Enumeration .1.3.6.1.4.1.22.5.1.11 |
rUBrSwIndicates the state of the bridging feature.
If this switch is turned OFF, no traffic
will be bridged through this unit. All traffic
will be required to be sent through one of the
active routing functions.rw Enumeration .1.3.6.1.4.1.22.5.1.12 |
rUIpCfgIndicates the state of IP routing based on its
(sub)net configuration. RT-CFG-HOST-ONLY indicates
that there is only one IP address in the unit.
All IP packets received while in this state will
be bridged as an unknown protocol.rw Enumeration .1.3.6.1.4.1.22.5.1.13 |
rURunningVersionIndicates the running version.ro OCTET STRING .1.3.6.1.4.1.22.5.1.14 |
rUDnldAllowedIndicates whether downloading to the brouter's
Flash memory will be permitted. If this flag is
set to OFF the agent will refuse to download
into its flash memory. At system start-up this
parameter will be initialized to OFF. Once this
has been set to ON, it will remain ON until either
the user sets it to OFF or a download has been
performed at which time the agent will set it
to OFF.rw Enumeration .1.3.6.1.4.1.22.5.1.15 |
rUInitFlashIndicates if the flash bank states are being
initialized. If this object is set to TRUE, the
side effect will be to cause the flash states
to be initialized. If the flash is in the
process of being initialized, a get or getnext
operation performed on this object will return
1 (TRUE), otherwise it will return 2 (FALSE).rw Enumeration .1.3.6.1.4.1.22.5.1.16 |
propSysPerm OBJECT IDENTIFIER .1.3.6.1.4.1.22.5.2 |
pPMibVerProprietary mib version number.ro INTEGER .1.3.6.1.4.1.22.5.2.2 |
pEepVerVersion number supported in the EEPROM.ro Enumeration .1.3.6.1.4.1.22.5.2.4 |
pUIpSwPermanently stored (EEPROM) value for IP
routing status. See rUIpSw for a complete
description. The default value for this object
is ON.rw Enumeration .1.3.6.1.4.1.22.5.2.6 |
pUDecSwPermanently stored (EEPROM) value for DECnet
routing status. See rUDecSw for a complete
description. The default value for this object
is ON.rw Enumeration .1.3.6.1.4.1.22.5.2.7 |
pUBrSwPermanently stored (EEPROM) value for
bridging status. See rUBrSw for a complete
description. The default value for this object
is ON.rw Enumeration .1.3.6.1.4.1.22.5.2.8 |
pUIpCfgPermanently stored (EEPROM) value for
IP configuration. See rUIpCfg for a complete
description. The default value for this object
is determined by the IP address stored in the
permanent database.ro INTEGER .1.3.6.1.4.1.22.5.2.9 |
pULoadVersionPermanently stored (EEPROM) value for the
desired load version. This value of this object
indicates which flash-stored version is to be
initiated upon reset of this unit.rw OCTET STRING .1.3.6.1.4.1.22.5.2.10 |
pUDefaultsWhen this object is set to 1, the side effect will
be to cause the unit to reset all the objects
defined under the subtree propSysPerm to their
default values. Reading this object has no
meaning. The integer value 1 will be returned
to a get or get-next request.rw INTEGER .1.3.6.1.4.1.22.5.2.11 |
pUFlashTableContains the information needed for Flash memory
maintenance. SEQUENCE OF PUFlashEntry .1.3.6.1.4.1.22.5.2.12 |
pUFlashEntryInformation about a particular bank of flash
memory. PUFlashEntry .1.3.6.1.4.1.22.5.2.12.1 |
flashIndexA unique index value for each flash memory bank.ro INTEGER .1.3.6.1.4.1.22.5.2.12.1.1 |
flashVersionIndicates the version contained in this flash
memory bank. If the flash memory bank is
uninitialized or invalid, this object will
contain a NULL stringro OCTET STRING .1.3.6.1.4.1.22.5.2.12.1.2 |
flashStatero Enumeration .1.3.6.1.4.1.22.5.2.12.1.3 |
sysPermBridgeAvailableIndicates whether the unit supports bridging
functionality or not.ro Enumeration .1.3.6.1.4.1.22.5.2.13 |
sysPermIpAvailableIndicates whether the unit supports IP
functionality or not. IP host functionality is
always present.ro Enumeration .1.3.6.1.4.1.22.5.2.14 |
sysPermDecAvailableIndicates whether the unit supports DECnet
functionality or not.ro Enumeration .1.3.6.1.4.1.22.5.2.15 |
pUloadTypeThis object indicates the type of download to
be exercised the next time the unit is loaded.
It is a choice of:
USER 1
MFG 2
DEV 3rw INTEGER .1.3.6.1.4.1.22.5.2.50 |
propIp OBJECT IDENTIFIER .1.3.6.1.4.1.22.6 |
propIpRun OBJECT IDENTIFIER .1.3.6.1.4.1.22.6.1 |
rIpMaskTableThe list of address masks used by this router
for determining its subnets. SEQUENCE OF RIpMaskEntry .1.3.6.1.4.1.22.6.1.1 |
rIpMaskEntryItems contained in the runtime Address Mask
Table. RIpMaskEntry .1.3.6.1.4.1.22.6.1.1.1 |
rMaskNetThe IP network this mask is defined for.rw NetworkAddress .1.3.6.1.4.1.22.6.1.1.1.1 |
rMaskThe subnet mask associated with the IP address
of this entry. The value of the mask is an IP
address with all the network bits set to 1
and all the hosts bits set to 0.rw NetworkAddress .1.3.6.1.4.1.22.6.1.1.1.2 |
rMaskStateThe state of this entry. To remove an entry
from the table, simply set this field to
INACTIVE.rw Enumeration .1.3.6.1.4.1.22.6.1.1.1.3 |
rIpOurAddrTableProprietary extensions for the rfc1156 defined
ipAddrTable. SEQUENCE OF RIpOurAddrEntry .1.3.6.1.4.1.22.6.1.2 |
rIpOurAddrEntryProprietary extensions for the rfc1156 defined
ipAddrEntry. A proprietary ipAddrTable entry
contains 4 standard objects and the 4 proprietary
objects listed below. The standard objects
are: ipAdEntAddr, ipAdEntIfIndex, ipAdEntNetMask
and ipAdEntBcastAddr. To add an ipAddrEntry to
the ipAddrTable, the rAddrState is the validating
item. Therefore, rAddrState must be the last item
in the message when adding an entry. The
ipAdEntNetMask is determined by the agent. There
is a separate mechanism that allows the user to
define address masks for the unit. See
rIpMaskTable and pIpMaskTable. To add to the
ipAddrTable the agent requires the ipAdEntAddr,
ipAdEntIfIndex, ipAdEntBcastAddr, rAddrDBcast,
rAddrRipMetric and the rAddrRipState followed by
the rAddrState. There are 4 default values
provided by the agent for this entry:
ipAdEntBcastAddr defaults to 'all ones',
rAddrDbcast defaults to 'no directed broadcast',
rAddrRipState defaults to ON and rAddrRipMetric
defaults to 1. To remove an ipAddrEntry, the
rAddrState should be set to INACTIVE. The INDEX
value specified should correspond to the IP
address of the desired entry. RIpOurAddrEntry .1.3.6.1.4.1.22.6.1.2.1 |
rAddrDbcastAllows the user to set the directed broadcast
parameter of an IP network. Default value
is 'no directed broadcast'.rw Enumeration .1.3.6.1.4.1.22.6.1.2.1.1 |
rAddrRipMetricA number from 1 to 15 used to calculate the
metrics to given destinations, RIP will add
this metric to metrics received from other
RIP gateways on this (sub)network. In effect,
this can be used to prioritize the (sub)network
used for a destination reachable via more than
one Brouter (sub)network. Default value is 1.rw INTEGER .1.3.6.1.4.1.22.6.1.2.1.2 |
rAddrRipStateDefines the current state of the RIP protocol
for this IP network. The default value is ON.rw Enumeration .1.3.6.1.4.1.22.6.1.2.1.3 |
rAddrStateThe state of this entry. To remove an entry
from the table, simply set this field to INACTIVE.rw Enumeration .1.3.6.1.4.1.22.6.1.2.1.4 |
rIpIfTableProprietary extensions for the rfc1156 defined
ifTable. SEQUENCE OF RIpIfEntry .1.3.6.1.4.1.22.6.1.3 |
rIpIfEntryProprietary extensions for the rfc1156 defined
ifEntry. The INDEX value specified should
correspond to the index of the interface of
the desired entry. RIpIfEntry .1.3.6.1.4.1.22.6.1.3.1 |
rIfArpStatAllows the user to turn ARP on and off for the
interface.rw Enumeration .1.3.6.1.4.1.22.6.1.3.1.1 |
rIfPArpStatAllows the user to turn proxy ARP on and off
for the interface.rw Enumeration .1.3.6.1.4.1.22.6.1.3.1.2 |
rIfBcMaskWhen set to ON, Brouter will broadcast its
address mask on start up. When set to OFF,
the Brouter will not broadcast its address
mask on start up.rw Enumeration .1.3.6.1.4.1.22.6.1.3.1.3 |
rDftGwThe IP address of the default gateway.rw NetworkAddress .1.3.6.1.4.1.22.6.1.4 |
rIpAtTableProprietary extensions for the rfc1156 defined
atTable. SEQUENCE OF RIpAtEntry .1.3.6.1.4.1.22.6.1.5 |
rIpAtEntryProprietary extensions for the rfc1156 defined
atEntry. A proprietary atTable entry contains
3 standard objects and the 2 proprietary objects
listed below. The standard objects are:
atIfIndex, atPhysAddress and atNetAddress. To
add an atEntry to the atTable, MIB-II defines
the atPhysAddress as the validating item.
Therefore, atPhysAddress must be the last item in
the message when adding an entry. To add to the
atTable the user must provide the atNetAddress
followed by the atPhysAddress. The 2 proprietary
objects associated with this entry are provided
by the agent. The rAtAge is incremented as the
entry ages and the rAtStatic entry is set to
static. All atEntries manually defined are
considered static and are not removed by the agent
until specifically requested by the manager. To
remove an atEntry, the atPhysAddress should be
set to a NULL string. The INDEX value is
constructed from the interface index of the
desired entry, the integer value 1, and the
network address of the desired entry. RIpAtEntry .1.3.6.1.4.1.22.6.1.5.1 |
rAtStaticDefines an entry as static or dynamic. A static
entry is one that has been entered manually by
the network administrator and can be changed
only by the network administrator. The routing
protocols never overwrite a static entry. A
dynamic entry is one created by the routing
protocols and is updated by them as per standard
definitions.ro Enumeration .1.3.6.1.4.1.22.6.1.5.1.1 |
rAtAgeThe age of the entry in minutes.ro INTEGER .1.3.6.1.4.1.22.6.1.5.1.2 |
rIpRtTableProprietary extensions for the rfc1156 defined
ipRoutingTable. SEQUENCE OF RIpRtEntry .1.3.6.1.4.1.22.6.1.6 |
rIpRtEntryProprietary extensions for the rfc1156 defined
ipRoutingEntry. A proprietary ipRouteEntry entry
contains 10 standard objects and the proprietary
object listed below. The standard objects are:
ipRouteDest, ipRouteIfIndex, ipRouteMetric1,
ipRouteMetric2, ipRouteMetric3, ipRouteMetric4,
ipRouteNextHop, ipRouteType, ipRouteProto and
ipRouteAge. To add an atEntry to the
ipRoutingTable, MIB-II defines the ipRouteType
as the validating item. Therefore, ipRouteType
must be the last item in the message when adding
an entry. All items, both proprietary and
standard, except the ipRouteDest, ipRouteNextHop,
ipRouteMetric1, and ipRouteType are determined
by the agent. To add to the ipRouteEntry the
agent requires the ipRouteDest, ipRouteNextHop,
and the ipRouteMetric1 followed by the
ipRouteType. The ipRouteIfIndex is determined
by the agent based on the ipRouteDest.
The ipRouteMetric2, ipRouteMetric3 and
ipRouteMetric4 are not used by the router and
are set to zero. The ipRouteProto is set to
local and rRtStatic is set to static. All
ipRouteEntries manually defined are considered
static and are not removed by the agent until
specifically requested by the manager. If the
ipRouteMetric1 is not provided, it's value
defaults to 1. To remove an ipRouteEntry, the
ipRouteType should be set to invalid. The INDEX
value specified should correspond to the
destination IP address of the desired entry. RIpRtEntry .1.3.6.1.4.1.22.6.1.6.1 |
rRtStaticDefines an entry as static or dynamic. A static
entry is one that has been entered manually by
the network administrator and can be changed only
by the network administrator. The routing
protocols never overwrite a static entry. A
dynamic entry is one created by the routing
protocols and is updated by them as per standard
definitions.ro Enumeration .1.3.6.1.4.1.22.6.1.6.1.1 |
rRipTrIndThis flag indicates whether the rRipTrustTable
is used to list trusted or not-trusted gateways.
When the state is changed, all existing entries
in the table are cleared. The default value is
OFF. Setting this object to OFF causes the
trust list to be removed and the router is
returned to the default state of TRUST ALL.rw Enumeration .1.3.6.1.4.1.22.6.1.7 |
rRipTrustTableThis table has 2 possible meanings depending on
the value of rRipTrInd. These 2 configuration
options allow the network administrator to limit
RIP's scope for inbound processing. Outbound
processing in not affected by this table. If
rRipTrInd is set to TRUSTED, RIP listens only to
the indicated gateways and no others. If
rRipTrInd is set to NOT-TRUSTED, RIP does not
listen to the indicated gateways but will accept
updates from all other gateways. If the value
of rRipTrInd is changed, this table is cleared.
If the table is empty, it is assumed that all
gateways are to be trusted or not-trusted
depending on the value of rRipTrInd. The default
for initialization is all gateways are trusted. SEQUENCE OF RRipTrustEntry .1.3.6.1.4.1.22.6.1.8 |
rRipTrustEntryThe list of fields needed to support the
rRipTrustTable. RRipTrustEntry .1.3.6.1.4.1.22.6.1.8.1 |
rTrRestGwThe IP address of the gateway being restricted.rw NetworkAddress .1.3.6.1.4.1.22.6.1.8.1.1 |
rTrRestStateThe state of this entry. To add an entry to the
list, set this field to ACTIVE. To remove an
entry from the table, simply set this field to
INACTIVE.rw Enumeration .1.3.6.1.4.1.22.6.1.8.1.2 |
rRipLsnIndTableThe rRipLsnIndTable contains the flags that
indicate the type of listen restriction that
is active for a given destination address. SEQUENCE OF RRipLsnIndEntry .1.3.6.1.4.1.22.6.1.9 |
rRipLsnIndEntryThe variables needed to maintain an entry in
the rRipLsnIndTable. RRipLsnIndEntry .1.3.6.1.4.1.22.6.1.9.1 |
rRipLsnIndDestThe restricted destination address. For the
LISTEN list this address will be the address of
a gateway on a locally attached (sub)network.
For the DO-NOT-LISTEN list this address will
be a locally attached (sub)network.rw NetworkAddress .1.3.6.1.4.1.22.6.1.9.1.1 |
rRipLsnTypeIndicates whether the restricted list for this
destination is a LISTEN list or a DO-NOT-LISTEN
list. When the restriction indicator is changed,
the associated LISTEN/DO-NOT-LISTEN list is
removed. This field is the validation field to
add/delete an entry in this table.rw Enumeration .1.3.6.1.4.1.22.6.1.9.1.2 |
rRipLsnTableSetting this table causes RIP to select inbound
update information about a specific network or
host. This table allows the network administrator
to limit RIP's scope for inbound processing.
Outbound processing is not affected by this table.
If the rRipLsnType for this destination is set to
LISTEN, RIP will use updates received from the
specified gateways only. If the rRipLsnType is
set to DO-NOT-LISTEN, RIP will discard updates
received from the specified gateways and process
all others. If the value of rRipLsnType is
changed, this table is cleared. This table is
maintained on a per destination basis. If the
table is empty, it is assumed that all gateways
are LISTEN for all destination addresses. This
is also the default setting. To change the state
of an entry in this table from LISTEN to
DO-NOT-LISTEN or vice versa, change the rRipLsnType
for the destination address and then define the
new restriction list for that address. SEQUENCE OF RRipLsnEntry .1.3.6.1.4.1.22.6.1.10 |
rRipLsnEntryThe list of fields needed to support the
rRipLsnTable. RRipLsnEntry .1.3.6.1.4.1.22.6.1.10.1 |
rLsnAddrThe destination address being restricted by
this command.rw NetworkAddress .1.3.6.1.4.1.22.6.1.10.1.1 |
rLsnRstAddrThe IP address of the gateway/network being
restricted.rw NetworkAddress .1.3.6.1.4.1.22.6.1.10.1.2 |
rLsnRstStateThe state of this entry. To remove an entry
from the table, set this field to INACTIVE.
To add an item to this table set the state to
ACTIVE. However, please note that before entries
be added to this list it must have a corresponding
entry in the rRipLsnIndTable.rw Enumeration .1.3.6.1.4.1.22.6.1.10.1.3 |
rRipAnncIndTableThe rRipAnncIndTable contains the flags that
indicate the type of announce restriction(s) that
are active for each (sub)network supported by the
unit. Please note that before any entries can be
defined here or in the rRipAnncTable, the
(sub)network must be defined to the router via
an ipAddrEntry. SEQUENCE OF RRipAnncIndEntry .1.3.6.1.4.1.22.6.1.11 |
rRipAnncIndEntryThe variables needed to maintain an entry in
the rRipAnncIndTable. RRipAnncIndEntry .1.3.6.1.4.1.22.6.1.11.1 |
rRipAnncIndNetThe IP address this unit recognizes on the
(sub)network being restricted.rw NetworkAddress .1.3.6.1.4.1.22.6.1.11.1.1 |
rRipAnncTypeIndicates whether this (sub)network has an
ANNOUNCE list, a DO-NOT-ANNOUNCE list or if the
restriction is shut OFF. When the restriction
indicator is changed, the associated
ANNOUNCE/DO-NOT-ANNOUNCE list is removed.rw Enumeration .1.3.6.1.4.1.22.6.1.11.1.2 |
rRipAnncTableSetting this table causes RIP to taylor its
update announcements. This table allows the
network administrator to limit RIP's scope for
outbound processing. Inbound processing is not
affected by this table. If the rRipAnncType
is set to ANNOUNCE, RIP will adjust its outbound
announcments on the indicated (sub)network by
propogating announcements for those gateways
listed in the rRipAnncTable only. All
announcements for gateways not on the ANNOUNCE
list will not be sent over the associated
(sub)network. If the rRipAnncType is set to
DO-NOT-ANNOUNCE, RIP will adjust its outbound
announcements on the indicated (sub)network by
not propogating announcements for those gateways
listed in the rRipAnncTable. All other
announcements will be propogated on the indicated
(sub)network. If the value of ripAnncType is
changed, this table is cleared. This table is
maintained on a per (sub)network basis. If the
table is empty, it is assumed that all gateways
on all (sub)networks are ANNOUNCE. This is also
the default state. To change the state of an
entry from ANNOUNCE to DO-NOT-ANNOUNCE or vice
versa, change the rRipAnncType in the
ripAnncIndTable for the (sub)network and then
define the new restriction list for the
(sub)network. Please note that before any
entries can be defined here or in the
rRipAnncIndTable, the (sub)network must be
defined to the router via an ipAddrEntry. SEQUENCE OF RRipAnncEntry .1.3.6.1.4.1.22.6.1.12 |
rRipAnncEntryThe list of fields needed to support the
rRipAnncTable. RRipAnncEntry .1.3.6.1.4.1.22.6.1.12.1 |
rAnncNetThe IP address this unit recognizes on the
(sub)network being restricted.rw NetworkAddress .1.3.6.1.4.1.22.6.1.12.1.1 |
rAnncDestAddrThe IP address of the gateway being restricted.rw NetworkAddress .1.3.6.1.4.1.22.6.1.12.1.2 |
rAnncRstStateThe state of this entry. To remove an entry
from the table, simply set this field to
INACTIVE.rw Enumeration .1.3.6.1.4.1.22.6.1.12.1.3 |
rRipSrcTableSetting this table causes RIP broadcasting to be
shut off by indicating which gateways should
receive directed RIP information. No broadcast
RIP update massages will be sent on the specified
network. This table allows the network
administrator to limit RIP's scope for outbound
processing. Inbound processing is not affected
by this table. As stated above, this table is
maintained on a per (sub)network basis. If the
table is empty, it is assumed that all gateways
are to receive updates, i.e. broadcast is turned
on. The default is broadcast all updates on all
(sub)networks. Please note that before any
entries can be defined here, the (sub)network
must be defined to the router via an ipAddrEntry. SEQUENCE OF RRipSrcEntry .1.3.6.1.4.1.22.6.1.13 |
rRipSrcEntryThe list of fields needed to support the
rRipSrcTable. RRipSrcEntry .1.3.6.1.4.1.22.6.1.13.1 |
rSrcAddrThe IP address this unit recognizes on the
(sub)network being restricted.rw NetworkAddress .1.3.6.1.4.1.22.6.1.13.1.1 |
rSrcRstGwThe IP address of the gateway being restricted.rw NetworkAddress .1.3.6.1.4.1.22.6.1.13.1.2 |
rSrcRstStateThe state of this entry. To remove an entry
from the table, simply set this field to
INACTIVE.rw Enumeration .1.3.6.1.4.1.22.6.1.13.1.3 |
rIpRtEvTableTable containing the status of each routing
event supported in the brouter. SEQUENCE OF RIpRtEvEntry .1.3.6.1.4.1.22.6.1.14 |
rIpRtEvEntryThe entry containing the status of a specific
routing event. RIpRtEvEntry .1.3.6.1.4.1.22.6.1.14.1 |
rRtEvTskIdThe task id of the reporting entity.ro INTEGER .1.3.6.1.4.1.22.6.1.14.1.1 |
rRtEvCodeThe event id assigned to the specific routing
event.ro INTEGER .1.3.6.1.4.1.22.6.1.14.1.2 |
rRtEvStatusStatus of this routing event.rw Enumeration .1.3.6.1.4.1.22.6.1.14.1.3 |
rIpRipStats OBJECT IDENTIFIER .1.3.6.1.4.1.22.6.1.15 |
rRipTotRefTotal number of RIP lookups.ro Counter .1.3.6.1.4.1.22.6.1.15.1 |
rRipTotFndNumber of times when routing destination was
found.ro Counter .1.3.6.1.4.1.22.6.1.15.2 |
rRipUdpRcvNumber of received RIP responses.ro Counter .1.3.6.1.4.1.22.6.1.15.3 |
rRipUdpXmtNumber of transmitted RIP responses.ro Counter .1.3.6.1.4.1.22.6.1.15.4 |
rRipUdpTrigTotal number of triggered RIP updates.ro Counter .1.3.6.1.4.1.22.6.1.15.5 |
rRipReqRcvNumber of received RIP requests.ro Counter .1.3.6.1.4.1.22.6.1.15.6 |
rRipReqXmtNumber of transmitted RIP requests.ro Counter .1.3.6.1.4.1.22.6.1.15.7 |
rRipInvRcvNumber of invalid RIP messages received.ro Counter .1.3.6.1.4.1.22.6.1.15.8 |
rIpArpStats OBJECT IDENTIFIER .1.3.6.1.4.1.22.6.1.16 |
rArpInMsgsThe total number of ARP messages which the
entity received. Note that this counter includes
all those counted by 'Inbound Errors'.ro Counter .1.3.6.1.4.1.22.6.1.16.1 |
rArpInErrThe number of ARP messages which the entity
received but determined as having errors (bad
ARP opcode, bad protocol, bad hardware type).ro Counter .1.3.6.1.4.1.22.6.1.16.2 |
rArpInIllThe number of illegal ARP messages received:
Target Protocol Address (tpa) and Sender Protocol
Address (spa) belongs to different networks, tpa,
spa are illegal, tpa is broadcast etc.ro Counter .1.3.6.1.4.1.22.6.1.16.3 |
rArpInOpCdThe number of ARP messages received, with bad
opcode. Neither request nor reply.ro Counter .1.3.6.1.4.1.22.6.1.16.4 |
rArpInReqThe number of ARP Request messages received.ro Counter .1.3.6.1.4.1.22.6.1.16.5 |
rArpInRepThe number of ARP Reply messages received.ro Counter .1.3.6.1.4.1.22.6.1.16.6 |
rArpInNotMeThe number of ARP Requests 'Not For Me messages'
received.ro Counter .1.3.6.1.4.1.22.6.1.16.7 |
rArpOutMsgsThe total number of ARP messages which this
entity attempted to send. Note that this counter
includes all those counted by 'Outbound Errors'.ro Counter .1.3.6.1.4.1.22.6.1.16.8 |
rArpOutErrThe number of ARP messages which this entity did
not send due to problems discovered within ARP
such as a lack of buffers. This value should not
include errors discovered outside the ARP layer
such as the inability of the data link layer to
send the message.ro Counter .1.3.6.1.4.1.22.6.1.16.9 |
rArpOutReqThe number of ARP Request messages sent.ro Counter .1.3.6.1.4.1.22.6.1.16.10 |
rArpOutRepThe number of ARP Reply messages sent.ro Counter .1.3.6.1.4.1.22.6.1.16.11 |
rArpResReqThe number of resolve requests to this entity
made by an upper level protocol.ro Counter .1.3.6.1.4.1.22.6.1.16.12 |
rIpPArp OBJECT IDENTIFIER .1.3.6.1.4.1.22.6.1.17 |
rPArpInRepThe number of ARP replies recognized as a reply
to a previous arp-request issued by proxy arp.ro Counter .1.3.6.1.4.1.22.6.1.17.1 |
rPArpInReqSrchThe number of ARP requests recognized as 'naive
request' that were put on the Proxy Search List.ro Counter .1.3.6.1.4.1.22.6.1.17.2 |
rPArpOutReqThe number of ARP request sent on behalf of
another host by proxy arp.ro Counter .1.3.6.1.4.1.22.6.1.17.3 |
rPArpOutRepThe number of ARP replies sent by proxy arp,
back to a naive host, as a result of passive
proxy (the sought host was in the table).ro Counter .1.3.6.1.4.1.22.6.1.17.4 |
rPArpOutActRepThe number of ARP replies sent by proxy arp,
back to a naive host, as the result of an
active proxy search.ro Counter .1.3.6.1.4.1.22.6.1.17.5 |
rPArpToutSrchThe number of entries that were timed out from
proxy arp search list (these entries got no reply
during the proxy life-time interval).ro Counter .1.3.6.1.4.1.22.6.1.17.6 |
rPArpNaiveReqThe number of ARP requests recognized as 'naive
request' and to be handled by proxy arp mechanism.
(A 'naive host' is a host with no subnetting
knowledge.)ro Counter .1.3.6.1.4.1.22.6.1.17.7 |
propIpPerm OBJECT IDENTIFIER .1.3.6.1.4.1.22.6.2 |
pIpMaskTableThe permanent list of address masks used by this
router to initialize it's rIpMaskTable. SEQUENCE OF PIpMaskEntry .1.3.6.1.4.1.22.6.2.1 |
pIpMaskEntryItems contained in the permanent Address Mask
Table. PIpMaskEntry .1.3.6.1.4.1.22.6.2.1.1 |
pMaskNetThe IP network this mask is defined for.rw NetworkAddress .1.3.6.1.4.1.22.6.2.1.1.1 |
pMaskThe subnet mask associated with the IP address
of this entry. The value of the mask is an IP
address with all the network bits set to 1 and
all the hosts bits set to 0.rw NetworkAddress .1.3.6.1.4.1.22.6.2.1.1.2 |
pMaskStateThe state of this entry. To remove an entry
from the table, simply set this field to
INACTIVE.rw Enumeration .1.3.6.1.4.1.22.6.2.1.1.3 |
pIpOurAddrTableThe permanent list of parameters used by this
router to initialize its ipAddrTable as well as
the extention table rIpOurAddrTable. SEQUENCE OF PIpOurAddrEntry .1.3.6.1.4.1.22.6.2.2 |
pIpOurAddrEntryObjects required for a single entry in the
pIpOurAddrTable. To add a pIpOurAddrEntry
to the pIpOurAddrTable, the pAddrState is the
validating item. Therefore, pAddrState must
be the last item in the message when adding an
entry. To add to the pIpOurAddrTable the agent
requires all 7 items listed below. There are 3
default values provided by the agent for this
entry: pAddrBcAddr defaults to -1, pAddrDbcast
defaults to 'no directed broadcast' and
pAddrRipMetric defaults to 1. To remove an
pIpOurAddrEntry, the pAddrState should be set
to INACTIVE. PIpOurAddrEntry .1.3.6.1.4.1.22.6.2.2.1 |
pAddrOurAddrThe IP Address being defined in this entry.rw NetworkAddress .1.3.6.1.4.1.22.6.2.2.1.1 |
pAddrIfIndexThe interface this IP Address being defined on.rw INTEGER .1.3.6.1.4.1.22.6.2.2.1.2 |
pAddrBcAddrAs defined in rfc1156. 'The value of the
least-significant bit in the IP broadcast address
used for sending datagrams on the (logical)
interface associated with the IP address of this
entry. For example, when the Internet standard
all-ones broadcast address is used, the value
will be 1.' The default value for this item is
all-ones.rw INTEGER .1.3.6.1.4.1.22.6.2.2.1.3 |
pAddrDbcastAllows the user to set the directed broadcast
parameter of an IP network. The default is 'no
directed broadcast'.rw INTEGER .1.3.6.1.4.1.22.6.2.2.1.4 |
pAddrRipMetricA number from 1 to 15 used to calculate the
metrics to given destinations, RIP will add
this metric to metrics received from other
RIP gateways on this (sub)network. In effect,
this can be used to prioritize the (sub)network
used for a destination reachable via more than
one Brouter (sub)network. Default value is 1.rw INTEGER .1.3.6.1.4.1.22.6.2.2.1.5 |
pAddrStateThe state of this entry. To remove an entry
from the table, simply set this field to
INACTIVE.rw Enumeration .1.3.6.1.4.1.22.6.2.2.1.6 |
pAddrRipStateThe state of RIP for this entry.rw Enumeration .1.3.6.1.4.1.22.6.2.2.1.7 |
pIpIfTableThe permanent list of parameters used by this
router to initialize its ifTable as well as the
extention table rIpIfTable. SEQUENCE OF PIpIfEntry .1.3.6.1.4.1.22.6.2.3 |
pIpIfEntryObjects required for a single entry in the
pIpIfEntry. PIpIfEntry .1.3.6.1.4.1.22.6.2.3.1 |
pIfIndexInterface ID that uniquely identifies this
interface among all other interfaces in this
brouter.ro INTEGER .1.3.6.1.4.1.22.6.2.3.1.1 |
pIfTypeSpecifies the type of Physical and Data-Link
layers. See rfc1156 for protocol codes.rw INTEGER .1.3.6.1.4.1.22.6.2.3.1.2 |
pIfMtuMaximum Transmission Unit size that is supported
on this network. The largest value acceptable for
Ethernet is 1500 and for FDDI is 4500.rw INTEGER .1.3.6.1.4.1.22.6.2.3.1.3 |
pIfArpStatAllows the user to turn ARP on and off for the
interface.rw Enumeration .1.3.6.1.4.1.22.6.2.3.1.4 |
pIfPArpStatAllows the user to turn proxy ARP on and off
for the interface.rw Enumeration .1.3.6.1.4.1.22.6.2.3.1.5 |
pIfAdminStatSpecifies the desired initial state of the
interface (i.e., should the interface be started
without direction from the operator). See rfc1156
for state codes.rw INTEGER .1.3.6.1.4.1.22.6.2.3.1.6 |
pIfBcMaskWhen set to ON, the brouter will broadcast its
address mask on start up. When set to OFF, the
brouter will not broadcast its address mask on
start up.rw Enumeration .1.3.6.1.4.1.22.6.2.3.1.7 |
pDftGwThe IP address of the permanent default gateway.rw NetworkAddress .1.3.6.1.4.1.22.6.2.4 |
pIpDefaultsWhen this object is set to 1, the side effect
will be to cause the unit to reset all the objects
defined under the subtree propIpPerm to their
default values. Reading this object has no
meaning. The integer value 1 will be returned to
a get or get-next request.rw Enumeration .1.3.6.1.4.1.22.6.2.5 |
propFddi OBJECT IDENTIFIER .1.3.6.1.4.1.22.7 |
fddiSmtChgeAt system startup, this object is set to FALSE.
The SNMP agent then sets this flag to TRUE when
any SMT object in the system is set by the
manager.ro Enumeration .1.3.6.1.4.1.22.7.1 |
fddiMacChgeAt system startup, this object is set to FALSE.
The SNMP agent then sets this flag to TRUE when
any MAC object in the system is set by the
manager.ro Enumeration .1.3.6.1.4.1.22.7.2 |
fddiPortChgeAt system startup, this object is set to FALSE.
The SNMP agent then sets this flag to TRUE when
any PORT object in the system is set by the
manager.ro Enumeration .1.3.6.1.4.1.22.7.3 |
fddiAttachChgeAt system startup, this object is set to FALSE.
The SNMP agent then sets this flag to TRUE when
any ATTACHMENT object in the system is set by the
manager.ro Enumeration .1.3.6.1.4.1.22.7.4 |