FIBRONICS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for FIBRONICS-MIB.
405
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
405 total| Object Name |
|---|
fibronics OBJECT IDENTIFIER .1.3.6.1.4.1.22 |
RFC1155-SMI Unknown .1.3.6.1.4.1.22 |
fbr101 OBJECT IDENTIFIER .1.3.6.1.4.1.22.101 |
fbr2 OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2 |
fbrStack OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2 |
chassis OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.7 |
chHWTypeIndicates type of enclosure in which the FIBRONICS SNMP agent operates.ro Enumeration .1.3.6.1.4.1.22.101.2.2.7.1 |
chNumberOfSlotsNumber of manageable slots in the chassis.
In FIBRONICS implementation it describes the number of manageable slots
in the chassis (not all slots should be occuppied).ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.2 |
chNumberOfEthernetBusesIndicates the number of internal Ethernet buses provided by the box.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.3 |
chNumberOfTRBusesIndicates the number of internal Token Ring buses provided by the box.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.4 |
chNumberOfFDDIBusesIndicates the number of internal FDDI buses provided by the box.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.5 |
chNumberOfLocalTalkBusesIndicates the number of internal Local Talk buses provided by the box.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.6 |
chResetSetting the value of this attribute to ON is interpreted as a reset
command for the whole chassis.
It initiates a complete reinitialisation of the chassis and of all
the devices incorporated inside the chassis.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.7 |
chFullConfigFull configuration message retrieved by FIBRONICS management stations
at periodic interrogation times. Coded in compact internal FIBRONICS
application format.ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.7.8 |
chAg OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.7.9 |
chGenAgTableTable of configuration attributes common to all SNMP agents in
FIBRONICS hubs. SEQUENCE OF ChGenAgEntry .1.3.6.1.4.1.22.101.2.2.7.9.1 |
chGenAgEntryAn entry in the table, containing configuration attributes for a single
agent. ChGenAgEntry .1.3.6.1.4.1.22.101.2.2.7.9.1.1 |
chGenAgIdAgent index for identifying the agent.Takes the value of the slot
number where the agent card is inserted. For box agents the value
of chGenAgId is chNumberOfSlots+1.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.1.1.1 |
chGenAgTypeAgent type.ro Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.1.1.2 |
chGenAgMgmtIfTypeThis attribute describes one of the interfaces of agents existing on
FIBRONICS modules and their type. Value 'none' defines the lack of
an interface recognized by the management console. Any other value
defines an interface whose type is recognized by the management console
and may be used as a management channel.ro Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.1.1.3 |
chGenAgAddrThis attribute defines an unique address by which the agent may be
addressed by the management console. The address format should be
consistent with the type defined by chGenAgMgmtIfType.ro OCTET STRING ( SIZE .1.3.6.1.4.1.22.101.2.2.7.9.1.1.4 |
chGenAgSpecificOIDThis attribute provides the OID of another group containing
additional more specific information regarding this instance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.7.9.1.1.5 |
chFbrAgTableTable of configuration attributes of FIBRONICS SNMP box agents in
FIBRONICS hubs. SEQUENCE OF ChFbrAgEntry .1.3.6.1.4.1.22.101.2.2.7.9.2 |
chFbrAgEntryAn entry in the table, containing configuration attributes for a single
agent. ChFbrAgEntry .1.3.6.1.4.1.22.101.2.2.7.9.2.1 |
chFbrAgIdAgent index for identifying the agent. Identical to the index in
chGenAgTable for the described agent.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.2.1.1 |
chFbrAgSLIPAddressIP address of the SLIP channel of the agentro IpAddress .1.3.6.1.4.1.22.101.2.2.7.9.2.1.2 |
chFbrAgSWVersionASCII string for description and display of the agent software version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22.101.2.2.7.9.2.1.3 |
chFbrAgKernelVersionASCII string for description and display of the agent operating system
(kernel) version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22.101.2.2.7.9.2.1.4 |
chFbrAgCoprocSWVersionASCII string describing the software version of the agent's coprocessor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22.101.2.2.7.9.2.1.5 |
chFbrAgSWFaultSystem fault emitted by agent software. It covers faults detected
by the agent operating system and drivers. EnterpriseSpecific traps
mechanism is used for transfering these traps to the management
system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22.101.2.2.7.9.2.1.6 |
chFbrAgMgmtBusSelectionAttribute describing the number of the bus on which management data
are reported.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.2.1.7 |
chFbrAgCoprocCommStatusAttribute describing the status of the communication between the
agent and its coprocessor.ro Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.8 |
chFbrAgCommDebugModeAttribute describing the agent mode in which communication problem
traps are sent to managers (value 'on') or are not sent to managers
(value 'off').rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.9 |
chFbrAgConfigChangeTrapsThe value of this attributes determines whether or not the agent
sends Configuration Change traps to the manager.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.10 |
chFbrAgFaultTrapsThe value of this attributes determines whether or not the agent
sends Fault traps to the manager.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.11 |
chFbrAgTrafficThreshTrapsThe value of this attributes determines whether or not the agent
sends Traffic Threshold traps to the manager.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.12 |
chFbrAgGroupEnrollDeenrollTrapsThe value of this attributes determines whether or not the agent
sends Group Enrollment and Group Deenrollment traps to the manager.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.13 |
chFbrAgSoftFaultTrapsThe value of this attributes determines whether or not the agent
sends Software Fault traps to the manager.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.14 |
chFbrAgHubEnrollTrapsThe value of this attributes determines whether or not the agent
sends periodic Hub Enrollment traps to the manager.rwobsolete Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.15 |
chFbrAgTempThreshTrapsThe value of this attributes determines whether or not the agent
sends Temperature Threshold traps to the manager.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.16 |
chFbrAgSpecificOIDThis attribute provides the OID of another group containing
additional more specific information regarding this instance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.7.9.2.1.17 |
chFbrAgLastAddrConfigConfiguration attribute describing the last physical address detected
at each port. Coded in internal FIBRONICS application format.ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.7.9.2.1.18 |
chFbrAgSecAddrConfigConfiguration attribute describing the configuration of the secure
addresses. Coded in internal FIBRONICS application format.ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.7.9.2.1.19 |
chFbrAgSoftwareStatusDescribes configuration of the firmware on this agent.
unLoadable(1) - is returned by agents which do not support the Software
Download feature;
loaded(2) - is returned by agents with loaded software;
downLoading(3) - when the attribute is set to this value by manager,
it triggers the Software Download procedure. When procedure finished,
agent software will restablish value loaded(2).rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.20 |
chFbrAgConfigurationSymbolDefines the Configuration Symbol attached to any hardware module
manufactured by FIBRONICS. One single character A..Z defines the CS
version. For older modules which did not support this option on
SNMP character '*' will be returned.rw DisplayString .1.3.6.1.4.1.22.101.2.2.7.9.2.1.21 |
chFbrAgIntTempInternal temperature measured by the temperature sensor placed on the
agent card. Expressed in Celsius degrees.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.2.1.22 |
chFbrAgBootVersionASCII string for description and display of the agent boot software
version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22.101.2.2.7.9.2.1.23 |
chFbrAgSensorFaultA code of a sensor fault discovered by the agent.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.2.1.24 |
chFbrAgSensorFaultTrapsThis attribute enables/disables generation of the sensor fault
trap.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.2.1.25 |
chFbrAgInterProcFaultA code of intercommunication fault between Main - Master processors.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.2.1.26 |
chFbrAgInterProcFaultTrapsThis attribute enables/disables generation of the intercommunication
fault trap.rw INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.2.1.27 |
chFbrAgSetup OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.7.9.3 |
chFbrAgMaxNmbOfMngrsMaximum number of permanent managers.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.3.1 |
chFbrAgPermMngrTableTable of permanent managers. SEQUENCE OF ChFbrAgPermMngrEntry .1.3.6.1.4.1.22.101.2.2.7.9.3.2 |
chFbrAgPermMngrEntryAn entry in the permanent managers table. ChFbrAgPermMngrEntry .1.3.6.1.4.1.22.101.2.2.7.9.3.2.1 |
chFbrAgPermMngrIdIndex in the permanent managers table. It ranges from 1 to chFbrAgMaxNmbOfMngrsro INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.3.2.1.1 |
chFbrAgPermMngrAddrIP address of a permanent manager.rw IpAddress .1.3.6.1.4.1.22.101.2.2.7.9.3.2.1.2 |
chFbrAgMaxNmbOfNetsMaximum number of remote networks.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.3.3 |
chFbrAgRmtNetTableRemote networks table. SEQUENCE OF ChFbrAgRmtNetEntry .1.3.6.1.4.1.22.101.2.2.7.9.3.4 |
chFbrAgRmtNetEntryEntry in the remote networks table. ChFbrAgRmtNetEntry .1.3.6.1.4.1.22.101.2.2.7.9.3.4.1 |
chFbrAgRmtNetIdIndex of a remote network. It ranges from 1 to chFbrAgMaxNmbOfNets.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.9.3.4.1.1 |
chFbrAgRmtNetAddrAddress of a remote network. The host portion is always 0.rw IpAddress .1.3.6.1.4.1.22.101.2.2.7.9.3.4.1.2 |
chFbrAgRmtNetMaskSubnet mask for the remote network.rw IpAddress .1.3.6.1.4.1.22.101.2.2.7.9.3.4.1.3 |
chFbrAgDateTimeCurrent date and time for NMA-TR. The format is YYMMDDhhmmssw, where w - day of the
week e.g., 1=Mon, 2=Tue,..., 7=Sun.rw DisplayString .1.3.6.1.4.1.22.101.2.2.7.9.3.5 |
chFbrAgResetThis attribute enables the user to reset the agent.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.9.3.6 |
chMgr OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.7.10 |
chMgrTrapRepStatusValue 'on' indicates that SNMP agent should send SNMP traps (traffic ex-
cluded) to the manager.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.10.1 |
chMgrContPerfRepValue 'on' indicates that the SNMP agent should send traffic SNMP traps
to the manager.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.10.2 |
chMgrMngmtStateAttribute to be set by manager in order to instruct the agent
to enter into a management session with the console.
Setting this value to 'on' has the effect of performing
an 'I am your manager' action upon the agent.rw Enumeration .1.3.6.1.4.1.22.101.2.2.7.10.3 |
chMgrPollIntervalThe attribute defines an interval during which the agent is waiting
for the manager's requests. Default value 5 minutes.rw INTEGER .1.3.6.1.4.1.22.101.2.2.7.10.4 |
chHW OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.7.11 |
chHWPSUTableTable of configuration attributes for Power Supply Units.
This table can be retrieved only from agents equipped with adequate
hardware. SEQUENCE OF ChHWPSUEntry .1.3.6.1.4.1.22.101.2.2.7.11.1 |
chHWPSUEntryAn entry in the table, containing configuration attributes for a single
Power Supply Unit. ChHWPSUEntry .1.3.6.1.4.1.22.101.2.2.7.11.1.1 |
chHWPSUIdPSU index for identifying the PSU.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.11.1.1.1 |
chHWPSUActivityStatusThis attribute defines the status of the PSU in what concerns
supplying power to the chassis.
NotActive - indicates a disabled or defective PSU which cannot supply
power to the chassis.
Dormant - indicates a functional PSU which is installed for backup
purposes and can at any moment supply power to the devices in the
chassis.
Active - indicates that the PSU supplies power to the chassis.ro Enumeration .1.3.6.1.4.1.22.101.2.2.7.11.1.1.2 |
chHWPSULocationDescribes the location (internal or external) of the PSU.ro Enumeration .1.3.6.1.4.1.22.101.2.2.7.11.1.1.3 |
chHWPSUVoltageIndicates voltage of PSU expressed in miliVolts.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.11.1.1.4 |
chHWIntTempWarningFault condition indicating that the temperature measured by one of the
sensors internal to the box exceeded chHWIntTempThresh.ro Enumeration .1.3.6.1.4.1.22.101.2.2.7.11.2 |
chHWIntTempThreshInternal enclosure temperature threshold value, expressed in
degrees Celsius. When exceeded, a trap is sent to the
management console.rw INTEGER .1.3.6.1.4.1.22.101.2.2.7.11.3 |
chHWPeakIntTempMaximum internal temperature inside the chassis. It is the maximum
of the temperature values detected by different temperature sensors
inside the box.ro INTEGER .1.3.6.1.4.1.22.101.2.2.7.11.4 |
chSlotLastChangeThis attribute contains the value of sysUpTime at the time any of the modules in the hub
was enrolled/deenrolled.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.22.101.2.2.7.12 |
genGroup OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.8 |
genGroupTableTable of configuration attributes for managed FIBRONICS modules.
Includes configuration data which are independent of the
specific functionality of the module. SEQUENCE OF GenGroupEntry .1.3.6.1.4.1.22.101.2.2.8.1 |
genGroupEntryAn entry in the table, containing data about a single group. GenGroupEntry .1.3.6.1.4.1.22.101.2.2.8.1.1 |
genGroupIdIndex which identifies the group inside the chassis for which this
entry contains information. Equals the number of the slot by which
the group is accessed. This value is never greater than chNumberOfSlots.ro INTEGER .1.3.6.1.4.1.22.101.2.2.8.1.1.1 |
genGroupSWVersionASCII string for description and display of the group software version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22.101.2.2.8.1.1.2 |
genGroupKernelVersionASCII string for description and display of the group kernel version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22.101.2.2.8.1.1.3 |
genGroupTypeAttribute describing the type of FIBRONICS Ethernet group.ro Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.4 |
genGroupDescrDescriptor of the group in ASCII (readable) format, mainly for use with
generic management applications.ro DisplayString .1.3.6.1.4.1.22.101.2.2.8.1.1.5 |
genGroupNumberOfPortsNumber of ports in group. It is assumed that on each group the ports
are assigned unique numbers in the range from 1 to genGroupNumberOfPorts.
They correspond to the number of ports on the module (FRU)ro INTEGER .1.3.6.1.4.1.22.101.2.2.8.1.1.6 |
genGroupNumberOfIntPortsNumber of internal ports (ports connected to the chassis buses) on
the module.ro INTEGER .1.3.6.1.4.1.22.101.2.2.8.1.1.7 |
genGroupResetSetting the value of this attribute to 'on' is interpreted as a software
RESET command. Sensor software is reinitialized and according to the
sensor specifications, partial or total reset of the module hardware may
be performed.rw Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.8 |
genGroupAutoManThis attribute reflects the status of the Auto/Manual switch which
defines the working mode of FIBRONICS sensors. In the MANUAL mode no set
operations may be performed on attributes related to the sensor. The
sensor works according to configuration switches set by hardware and
transmits all configuration information to the agent. In the AUTO mode,
hardware switches are overridden by set commands.ro Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.9 |
genGroupFullConfigAttribute describing the full configuration of a group in internal
FIBRONICS application format.ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.8.1.1.10 |
genGroupRedun12Value ON of this attribute defines a redundancy (backup) relationship
between synchronous external ports 1 and 2 on a FIBRONICS module.rw Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.11 |
genGroupRedun34Value ON of this attribute defines a redundancy (backup) relationship
between synchronous external ports 3 and 4 on a FIBRONICS module.rw Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.12 |
genGroupRedun13-14Value ON of this attribute defines a redundancy (backup) relationship
between synchronous external ports 13 and 14 on a FIBRONICS module.rw Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.13 |
genGroupStandAloneModeValue ON of this attribute indicates the sensor's operation Stand Alone
mode . Internal ports are disabled and the card functions in a local
star configuration toward its external ports.rw Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.14 |
genGroupInterProcCommStatusThis attribute describes the status of the communication between the
microprocessor of the sensor and the microprocessor of the agent on cards
with embedded agents.ro Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.15 |
genGroupCommStatusThis attribute describes the communication status of the group with
the SNMP Agent as detected and reported by the agent.ro Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.16 |
genGroupHWStatusThis attribute describes the status of the group hardware as detected
by the sensors software.ro Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.17 |
genGroupSupplyVoltageFaultA value 'on' of this attribute informs of a 'voltage supply
out-of-range' error condition on sensor equipped with
hardware which checks this condition.ro Enumeration .1.3.6.1.4.1.22.101.2.2.8.1.1.18 |
genGroupIntTempInternal temperature of the enclosure as measured by the
specific module instance.ro INTEGER .1.3.6.1.4.1.22.101.2.2.8.1.1.19 |
genGroupSpecificOIDThis attribute provides the OID of another group containing
additional more specific information regarding this instance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.8.1.1.20 |
genGroupConfigurationSymbolDefines the Configuration Symbol attached to any hardware module
manufactured by FIBRONICS. One single character A..Z defines the CS
version. For older modules which did not support this option on
SNMP character '*' will be returned.rw DisplayString .1.3.6.1.4.1.22.101.2.2.8.1.1.21 |
genGroupLastChangeThis attribute contains the value of sysUpTime at the time any change pertaining to the
specified group occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.22.101.2.2.8.1.1.22 |
genPort OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.9 |
genPortTableTable of configuration attributes for managed FIBRONICS ports.
Includes configuration data which are independent of the
specific functionality of the port. SEQUENCE OF GenPortEntry .1.3.6.1.4.1.22.101.2.2.9.1 |
genPortEntryAn entry in the table, containing data about a single port. GenPortEntry .1.3.6.1.4.1.22.101.2.2.9.1.1 |
genPortGroupIdIndex which identifies the group inside the chassis for which this
entry contains information. Equals the number of the slot by which
the group containing the port is accessed. This value is never greater
than chNumberOfSlots.ro INTEGER .1.3.6.1.4.1.22.101.2.2.9.1.1.1 |
genPortIdIndex which identifies the port inside the group for which this
entry contains information. It generally corresponds with the number
by which the port is identified and is marked on the module.
This value is never greater than genGroupNumberOfPorts of the group
to which the port belongs.ro INTEGER .1.3.6.1.4.1.22.101.2.2.9.1.1.2 |
genPortFunctionalityDescribes the functionality of the port according to international
standards.ro Enumeration .1.3.6.1.4.1.22.101.2.2.9.1.1.3 |
genPortTypeAttribute describing the type of FIBRONICS port.ro Enumeration .1.3.6.1.4.1.22.101.2.2.9.1.1.4 |
genPortDescrDescriptor of the port in ASCII (readable) format, mainly for use with
generic management applications.ro DisplayString .1.3.6.1.4.1.22.101.2.2.9.1.1.5 |
genPortActivityStatusThis attribute defines the status of ports that may be part of
a redundancy scheme.
NotActive - indicates a disabled port which cannot transmit or receive
packets even if included in a redundancy scheme.
Dormant - indicates an enabled port which does not transmit or receive
packets, but because it is included in a redundancy scheme, it may at
any moment become responsible packet transmission and reception.
Active - indicates that the port transmits and receives packets, serving
as the main path in the redundant configuration.ro Enumeration .1.3.6.1.4.1.22.101.2.2.9.1.1.6 |
genPortSecurityPolicySecurity policy (Trap Only or Trap and Close) assigned to this port.
The information is coded in internal FIBRONICS format.rw OCTET STRING .1.3.6.1.4.1.22.101.2.2.9.1.1.7 |
genPortSecureAddressesThis attribute defines the security information (physical addresses)
relevant for the entry. Coded in internal format, cryptographic
methods may be used for privacy purposes.rw OCTET STRING .1.3.6.1.4.1.22.101.2.2.9.1.1.8 |
genPortIntPortConnectionThe value of this attribute defines the internal port to which the port
is connected. A value 0 of this attribute would indicate no internal
port connection (stand-alone mode). Any other positive value equals
the number of the internal port.ro INTEGER .1.3.6.1.4.1.22.101.2.2.9.1.1.9 |
genPortAdminStatusA disabled port neither transmits nor receives. The port must be explici-
tenly enabled to restore operation. For token ring ports, this attribute
is read-only.rw Enumeration .1.3.6.1.4.1.22.101.2.2.9.1.1.10 |
genPortSpecificOIDThis attribute provides the OID of another group containing
additional more specific information regarding this instance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.9.1.1.11 |
genIntPort OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.10 |
genIntPortTableTable of configuration attributes of FIBRONICS internal ports.
Internal ports are physical and/or logical entities which
transfer information and connect FIBRONICS modules to the internal
networks (buses). SEQUENCE OF GenIntPortEntry .1.3.6.1.4.1.22.101.2.2.10.1 |
genIntPortEntryAn entry in the table, containing data about a single port. GenIntPortEntry .1.3.6.1.4.1.22.101.2.2.10.1.1 |
genIntPortGroupIdIndex which identifies the group inside the chassis for which this
entry contains information. Equals the number of the slot by which
the group containing the internal port is accessed. This value is
never greater than chNumberOfSlots.ro INTEGER .1.3.6.1.4.1.22.101.2.2.10.1.1.1 |
genIntPortIdIndex which identifies the port inside the group for which this
entry contains information.
This value is never greater than genGroupNumberOfIntPorts
of the group to which the port belongs.ro INTEGER .1.3.6.1.4.1.22.101.2.2.10.1.1.2 |
genIntPortAdminStatusDefines the capability of the internal port to transmit or receive data.
A disabled internal port neither transmits or receives. The port must be
explicitly enabled to restore operation.rw Enumeration .1.3.6.1.4.1.22.101.2.2.10.1.1.3 |
genIntPortActivityStatusThis attribute defines the status of internal ports that may be part
of a redundancy scheme.
NotActive - indicates a disabled port which cannot transmit or receive
packets even if included in a redundancy scheme.
Dormant - indicates an enabled port which does not transmit or receive
packets, but because it is included in a redundancy scheme, it may at
any moment become responsible for packet transmission and reception.
Active - indicates that the port transmits and receives packets, serving
as the main path in the redundant configuration.ro Enumeration .1.3.6.1.4.1.22.101.2.2.10.1.1.4 |
genIntPortBusConnNumberThe value of this attribute defines the bus to which the internal port
is connected. The value '0' indicates that the port is disconnected from
the bus.rw INTEGER .1.3.6.1.4.1.22.101.2.2.10.1.1.5 |
genIntPortBusConnTypeThe value of this attribute defines the type of the bus to which
the internal port is connected.ro Enumeration .1.3.6.1.4.1.22.101.2.2.10.1.1.6 |
genIntPortSpecificOIDThis attribute provides the OID of another group containing
additional more specific information regarding this instance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.10.1.1.7 |
genIntPortMonitorModeThis attribute enables to monitor a specified bus (RMON).rw Enumeration .1.3.6.1.4.1.22.101.2.2.10.1.1.8 |
softRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.11 |
softRedundancyTableTable of attributes which define software redundancy links
defined by means of the FIBRONICS chassis SNMP agents. SEQUENCE OF SoftRedundancyEntry .1.3.6.1.4.1.22.101.2.2.11.1 |
softRedundancyEntryAn entry in the table, containing data about a single
software redundancy link. SoftRedundancyEntry .1.3.6.1.4.1.22.101.2.2.11.1.1 |
softRedundancyIdIndex which identifies the software redundancy link which for
which the current entry provides information.ro INTEGER .1.3.6.1.4.1.22.101.2.2.11.1.1.1 |
softRedundancyNameLogical name of the software redundancy linkrw DisplayString .1.3.6.1.4.1.22.101.2.2.11.1.1.2 |
softRedundancyGroupId1ID of the group to which the main port on the software redundancy
link belongs. This value is never greater than chNumberOfSlots.rw INTEGER .1.3.6.1.4.1.22.101.2.2.11.1.1.3 |
softRedundancyPortId1ID of the main port on the software redundancy link.rw INTEGER .1.3.6.1.4.1.22.101.2.2.11.1.1.4 |
softRedundancyGroupId2ID of the group to which the secondary port on the software redundancy
link belongs. This value is never greater than chNumberOfSlots.rw INTEGER .1.3.6.1.4.1.22.101.2.2.11.1.1.5 |
softRedundancyPortId2ID of the secondary port on the software redundancy link.rw INTEGER .1.3.6.1.4.1.22.101.2.2.11.1.1.6 |
softRedundancyStatusStatus of the entry in the softRedundancy Table:
valid(1) indicates that row is busy with meaningful values;
createRequest(2) will be set by manager when creating a new row;
underCreation(3) indicates that agent accepts create command and
performs it;
invalid(4) indicates that no meaningful values are present in the
row. Managers set this value in order to transmit a 'Delete
row' command to agent.rw Enumeration .1.3.6.1.4.1.22.101.2.2.11.1.1.7 |
eth OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.12 |
ethAg OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.12.1 |
ethAgTableTable of attributes which define configuration characteristics
for FIBRONICS chassis SNMP agents which use Ethernet as in-band
management protocol. SEQUENCE OF EthAgEntry .1.3.6.1.4.1.22.101.2.2.12.1.1 |
ethAgEntryAn entry in the table, containing data about a single Ethernet
agent. EthAgEntry .1.3.6.1.4.1.22.101.2.2.12.1.1.1 |
ethAgIdIndex which identifies the Ethernet agent for which the current
entry provides information.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.1.1.1.1 |
ethAgPerfBusSelectionAttribute describing the bus attached to the performance data collection
hardware on those FIBRONICS agent hardware implementations which support
configuration management on multi-Ethernet bus enclosures, but performan-
ce data collection on a single bus.rw INTEGER .1.3.6.1.4.1.22.101.2.2.12.1.1.1.2 |
ethGroup OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.12.2 |
ethGroupTableTable of attributes which define configuration characteristics
for FIBRONICS Ethernet modules. SEQUENCE OF EthGroupEntry .1.3.6.1.4.1.22.101.2.2.12.2.1 |
ethGroupEntryAn entry in the table, containing data about a single Ethernet
module (group). EthGroupEntry .1.3.6.1.4.1.22.101.2.2.12.2.1.1 |
ethGroupIdIndex which identifies the group inside the chassis for which this
entry contains information. Equals the number of the slot by which
the group is accessed. This value is never greater than chNumberOfSlots.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.2.1.1.1 |
ethGroupFIFOValue ON of this attribute describes an internal FIFO error sensed by
the internal hardware mechanism of a FIBRONICS repeater.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.2 |
ethGroup10BTPlusValue ON of this attribute defines activation of the 10BaseTPlus
mode - a FIBRONICS extension of the 10BaseT standard.rw Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.3 |
ethGroupIntPortsRedundancyValue ON of this attribute defines a redundancy (backup) relationship
between internal ports 1 and 2 on a FIBRONICS module.rw Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.4 |
ethGroupBackboneModeValue On of this attribute defines Backbone Mode of a sensor. Internal
ports are enabled and the information path goes straightly from external
port to internal bus, via corresponding internal port.rw Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.5 |
ethGroupFOIRLPlusModeValue On of this attribute defines FOIRL of a sensor. When this attribute
has value ON, FOIRL Plus mode is enabled, while value OFF indicates stan-
dard FOIRL mode.rw Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.6 |
ethGroupWrongPortSelectionA value ON of this attribute warns of incorrect selection of enabled
ports on sensors which impose restrictions on this configura-
tion (e.g. integrated local bridges.)ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.7 |
ethGroupBackupBusDefines the common secondary bus for Ethernet groups with bus
redundancy defined at port level.rw INTEGER .1.3.6.1.4.1.22.101.2.2.12.2.1.1.8 |
ethGroupSingleBusModeValue 'on of this attribute defines bus-star mode for cards
supporting this type of configuration.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.9 |
ethGroupSpecificOIDThis attribute provides the OID of another group containing
additional more specific information regarding this instance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.12.2.1.1.10 |
ethGroup10FBPlusThis variable enables/disables 10BaseFB plus mode.rw Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.11 |
ethGroupMasterClockThis attribute pertains to the SH-E16 chassis and defines the hub in the stack that
generates the clock.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.12 |
ethGroupIdleTrxThis attribute is relevant to the LE-120Q/SQ modules and when set to 'off' after
port disable terminates also light propagation (for redundancy tests).rw Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.13 |
ethGroupMJLPStatusThis attribute defines the MJLP error status on the group level.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.2.1.1.14 |
ethPort OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.12.3 |
ethPortTable SEQUENCE OF EthPortEntry .1.3.6.1.4.1.22.101.2.2.12.3.1 |
ethPortEntry EthPortEntry .1.3.6.1.4.1.22.101.2.2.12.3.1.1 |
ethPortGroupIdId of the group to which the port belongs.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.3.1.1.1 |
ethPortIdUnique Id of the port in the ethPortTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.3.1.1.2 |
ethPortFunctionalStatusThe value of this attribute reflects the functional status of FIBRONICS
synchronous ports. Note that it is not mandatory that all ports
support all the enumerated states. Here is the minimal set possible
states:
OK - fully functional port, transmitting and receiving packets.
RLD - receive link down condition on the port.
TLD - transmit link down condition on the port.
LocalJabber - fault condition indicating that the port emitted jabber.
RemoteJabber - fault condition indicating that remote jabber was sensed
at the port.
IllSeq - Fault condition indicating an illegal synchronization sequence
at the port.
ShortCircuit - short-circuit fault condition detected at the port.
PartitionOrLocalJabber -
RemoteFaultOrLockLoss -ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.3.1.1.3 |
ethPortManPartSetting the value of this attribute to ON activates the manual
partition mechanism at the port level. Setting the value of this
attribute to OFF cancels the partition mechanism. The segment
may reconnect after the reception of 32 packets. Attribute vaild
for repeater modules from the LE-10 family.rw Enumeration .1.3.6.1.4.1.22.101.2.2.12.3.1.1.4 |
ethPortJabberValue ON of this attribute reflects jabber transmitted to the port by
the hardware of a FIBRONICS repeater or transceiver, as a result of
collisions detected on the port. Valid for all modules in the LE-10 and
LE-15 families.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.3.1.1.5 |
ethPortNoAUILoopValue ON of this attribute indicates that a No AUI Loop fault condition
was detected on an AUI repeater port. Valid for LE-10C family of modu-
les.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.3.1.1.6 |
ethPortMJLPValue ON of this attribute describes an internal MJLP (MAU Jabber
Lockup Protection) error sensed by the internal hardware mechanism
of a FIBRONICS repeater.
Valid for LE140XTF.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.3.1.1.7 |
ethPortFIFOValue ON of this attribute describes an internal FIFO error sensed by the
internal hardware mechanism of a FIBRONICS repeater. Valid for LE140XTF.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.3.1.1.8 |
ethPortAutoPartitionStateThe AutoPart condition indicates that the port is currently partitioned
by the auto-partition protection mechanism.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.3.1.1.9 |
ethPortSQETestSettable attribute which allows activation of SQE test for FIBRONICS
integrated transceivers.rw Enumeration .1.3.6.1.4.1.22.101.2.2.12.3.1.1.10 |
ethPortLastSourceAddrEthernet source address of the last readable frame received by this
port.ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.12.3.1.1.11 |
ethPortUserStatusAttribute defining the connection of a port to a single Ethernet source
or to a multi-source (segment or star).ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.3.1.1.12 |
ethPortMainBusSelectionOn cards with port-level redundancy, defines the main bus for each
port instance as selected by user.rw INTEGER .1.3.6.1.4.1.22.101.2.2.12.3.1.1.13 |
ethPortTrafficCounter for the number of bits received on this port in frames with legal
length information.ro Counter .1.3.6.1.4.1.22.101.2.2.12.3.1.1.14 |
ethPortFramesReceivedOKA representation of the total number of frames of legal length that have
not been corrupted in transmission. These frames can be encoded and
decoded by the commonly available MACs and provide a measure of the
network bandwidth being used. The number does not include frames received
with frame-too-long, FCS, alignment errors, frames lost due to internal
MAC sublayer errors, runts or pygmys.ro Counter .1.3.6.1.4.1.22.101.2.2.12.3.1.1.15 |
ethPortRuntsCounter for the number of collision fragments longer than a pygmy and
shorter than a legal packet, detected on this port.ro Counter .1.3.6.1.4.1.22.101.2.2.12.3.1.1.16 |
ethPortPacketErrorsCounter for the number of frames with errors detected on the port by
the FIBRONICS agent hardware. This generic port error comprises too long
packets, CRC and alignment errors.ro Counter .1.3.6.1.4.1.22.101.2.2.12.3.1.1.17 |
ethPortSpecificOIDThis attribute provides the OID of another group containing
additional more specific information regarding this instance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.12.3.1.1.18 |
ethPortCollisionsThe number of collisions observed on a specified port. Relevant
for MPR modules.ro Counter .1.3.6.1.4.1.22.101.2.2.12.3.1.1.19 |
ethPortPartitionsThe number of partitions observed on a specified port. Relevant
for MPR modules.ro Counter .1.3.6.1.4.1.22.101.2.2.12.3.1.1.20 |
ethPortPygmysThe number of pygmys observed on a specified port. Relevant
for MPR modules.ro Counter .1.3.6.1.4.1.22.101.2.2.12.3.1.1.21 |
ethIntPort OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.12.4 |
ethIntPortTable SEQUENCE OF EthIntPortEntry .1.3.6.1.4.1.22.101.2.2.12.4.1 |
ethIntPortEntry EthIntPortEntry .1.3.6.1.4.1.22.101.2.2.12.4.1.1 |
ethIntPortGroupIdID of the group to which the internal port belongs.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.4.1.1.1 |
ethIntPortIdID of the internal port in the ethIntPortTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.4.1.1.2 |
ethIntPortPartitionThis condition indicates that the internal port is currently partitioned
from the bus by the auto-partition protection mechanism.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.4.1.1.3 |
ethIntPortJabberValue ON of this attribute reflects jabber being transmitted to the bus
by the hardware of a FIBRONICS repeater, as a result of collisions detected
on the internal bus of the enclosure. This situation is similar to MJLP
as defined by the Repeater Management standard.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.4.1.1.4 |
ethIntPortBackedUpIndicates that internal port is part of a redundancy scheme.rw Enumeration .1.3.6.1.4.1.22.101.2.2.12.4.1.1.5 |
ethBus OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.12.5 |
ethBusPerfTable SEQUENCE OF EthBusPerfEntry .1.3.6.1.4.1.22.101.2.2.12.5.1 |
ethBusPerfEntry EthBusPerfEntry .1.3.6.1.4.1.22.101.2.2.12.5.1.1 |
ethBusPerfAgIdID of the agent in the ethBusPerfTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.5.1.1.1 |
ethBusPerfIdID of the bus in the ethBusPerfTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.5.1.1.2 |
ethBusTrafficBufferRecord of traffic for the last second with a resolution of 100 msec. The
traffic is expressed in percents of the maximum Ethernet traffic and each
record contains 10 readings, in the range 1..20, expressed on a log(10)
scale ( value = 10*log10(percent) ).ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.12.5.1.1.3 |
ethBusTrafficThreshTraffic threshold value. When exceeded, a trap is send to the management
console. Expressed in percents of the maximum Ethernet traffic, in the
range 1..20, expressed on a log(10) scale.rw INTEGER .1.3.6.1.4.1.22.101.2.2.12.5.1.1.4 |
ethBusPeakTrafficMaximal traffic value since last reset of hub or relay. Expressed in per-
cents of the maximum Ethernet traffic, in the range 1..20,
expressed on log(10) scale.ro INTEGER -- Values 1..20 (Log(10) scale) .1.3.6.1.4.1.22.101.2.2.12.5.1.1.5 |
ethBusTotalCollisionsCounter incremented every time the hub enters a condition caused by
simultaneous transmission and detection of external activity on one or
more of its ports.ro Counter .1.3.6.1.4.1.22.101.2.2.12.5.1.1.6 |
ethBusTotalPacketsCounter for number of packets (good and errors) detected on the
Ethernet bus.ro Counter .1.3.6.1.4.1.22.101.2.2.12.5.1.1.7 |
ethBusTotalErrorsCounter for number of errors detected on the Ethernet bus. Does not
take into account the collisions.ro Counter .1.3.6.1.4.1.22.101.2.2.12.5.1.1.8 |
ethBusTrafficLast traffic reading (sampling time = 100 msec). The
traffic is expressed in percents of the maximum Ethernet traffic
in the range 1..20, expressed on a log(10)
scale ( value = 10*log10(percent) ).ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.5.1.1.9 |
ethBusUtilizationLast traffic reading (sampling time = 100 msec). The traffic is expressed
in percents of the maximum Ethernet traffic.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.5.1.1.10 |
ethBusPeakUtilizationMaximal traffic value since last reset of agent. Expressed in percents
of the maximum effective Ethernet traffic.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.5.1.1.11 |
ethBusClockTable SEQUENCE OF EthBusClockEntry .1.3.6.1.4.1.22.101.2.2.12.5.2 |
ethBusClockEntry EthBusClockEntry .1.3.6.1.4.1.22.101.2.2.12.5.2.1 |
ethBusClockBusIdID of the bus in the ethBusClockTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.5.2.1.1 |
ethBusClockIdID of the clock in the ethBusClockTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.12.5.2.1.2 |
ethBusClockTestResultValues clockFailure and busFailure define the faulty statuses for
clock tests. The test is performed by LCL100 module.ro Enumeration .1.3.6.1.4.1.22.101.2.2.12.5.2.1.3 |
tok OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.13 |
tokRing OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.13.1 |
tokRingTable SEQUENCE OF TokRingEntry .1.3.6.1.4.1.22.101.2.2.13.1.1 |
tokRingEntry TokRingEntry .1.3.6.1.4.1.22.101.2.2.13.1.1.1 |
tokRingAgIdID of the agent to which the ring belongs in the tokRingTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.1.1.1.1 |
tokRingIdID of the ring in the tokRingTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.1.1.1.2 |
tokRingLeftSlotSlot number of the left-most slot of the ring.ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.1.1.1.3 |
tokRingRightSlotSlot number of the right-most slot of the ring that has a lobe port.rw INTEGER .1.3.6.1.4.1.22.101.2.2.13.1.1.1.4 |
tokRingTrafficBufferRecord of traffic for the last second with a resolution of 100 msec.
The traffic is expressed in percents of the maximum effective TR traffic
(token messages are excluded) and each record contains 10 readings,
in range 1..20 on log(10) scale.ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.13.1.1.1.5 |
tokRingTrafficThreshTraffic threshold value. When exceeded, a trap is send to the management
console. Expressed in percents of the maximum effective TR traffic
(token messages are excluded) in the range 1..20 on log(10) scale.rw INTEGER .1.3.6.1.4.1.22.101.2.2.13.1.1.1.6 |
tokRingPeakTrafficMaximal traffic value since last reset of agent. Expressed in percents
of the maximum effective TR traffic (token messages are excluded), in the
range 1..20 on log(10) scale.ro INTEGER -- Values 1..20 (Log(10) scale) .1.3.6.1.4.1.22.101.2.2.13.1.1.1.7 |
tokRingNumberOfStationsNumber of Token Ring stations (controllers) detected on the ring. The
TR controller of the agent card is included in this count.ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.1.1.1.8 |
tokRingConfigurationConfiguration attribute describing the list of physical addresses
detected on the Token Ring. Coded in internal FIBRONICS application
format.ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.13.1.1.1.9 |
tokRingBeaconingThis attribute indicates if a beaconing condition is currently
detected on the ring.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.1.1.1.10 |
tokRingBeaconingStationThe MAC address of the last station which was detected as sending
Beaconing MAC frames on the ring.ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.13.1.1.1.11 |
tokRingStationsMatchThis attribute indicates matching between the number of stations
detected on the ring between the current agent and the next agent
on Up Stream sense and the number of connected lobe ports.Used by
the port address correlation mechanism.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.1.1.1.12 |
tokRingTrafficLast traffic reading (sampling time = 100 msec). The
traffic is expressed in percents of the maximum Ethernet traffic
in the range 1..20, expressed on a log(10)
scale ( value = 10*log10(percent) ).ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.1.1.1.13 |
tokRingSecurityMethodSecurity scheme selected by the user.rw Enumeration .1.3.6.1.4.1.22.101.2.2.13.1.1.1.14 |
tokRingSecurityPolicySecurity policy (trap only or trap and disconnect) selected for the
ring. Coded in FIBRONICS internal format.rw OCTET STRING .1.3.6.1.4.1.22.101.2.2.13.1.1.1.15 |
tokRingSecureAddrSecure addresses assigned to the ring. Coded in FIBRONICS internal
format.rw OCTET STRING .1.3.6.1.4.1.22.101.2.2.13.1.1.1.16 |
tokRingLastViolationMAC address of a last detected intruder.ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.13.1.1.1.17 |
tokRingUtilizationLast traffic reading (sampling time = 100 msec). The traffic is expressed
in percents of the maximum Token Ring traffic.ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.1.1.1.18 |
tokRingPeakUtilizationMaximal traffic value since last reset of agent. Expressed in percents
of the maximum effective TR traffic (token messages are excluded).ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.1.1.1.19 |
tokGroup OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.13.2 |
tokGroupTable SEQUENCE OF TokGroupEntry .1.3.6.1.4.1.22.101.2.2.13.2.1 |
tokGroupEntry TokGroupEntry .1.3.6.1.4.1.22.101.2.2.13.2.1.1 |
tokGroupIdNumber of the slot in which the group is installed.ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.2.1.1.1 |
tokGroupAutoRightLoopValue ON of this attribute signifies that a hardware loop was
automatically created on a Token Ring module which does not sense
the existence of another token ring group on the right hand side.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.2 |
tokGroupAutoLeftLoopValue ON of this attribute signifies that a hardware loop was
automatically created on a Token Ring module which does not sense
the existence of another token ring group on the left hand side.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.3 |
tokGroupManRightLoopSetting this attribute to ON signifies a command to the hardware
to create a loop on the Token Ring module which isolates the ring
from the right hand side.rw Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.4 |
tokGroupManLeftLoopSetting this attribute to ON signifies a command to the hardware
to create a loop on the Token Ring module which isolates the ring
from the left hand side.rw Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.5 |
tokGroupRightNeighborAttribute defining the existence of a neighbor another token ring
group on the right hand side of the module.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.6 |
tokGroupLeftNeighborAttribute defining the existence of a neighbor another token ring
group on the left hand side of the module.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.7 |
tokGroupIOModeAttribute defining the I/O mode (single, dual-ring-in, dual-ring-out)
Lobe, Internal Repeater or Star) of a module from the the LTR-IO family.rw Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.8 |
tokGroupBridgeModeAttribute describing the operational mode of the bridge.
For ITLB the following modes are defined:
- Mode A: First channel connected to an external ring (RI,RO connectors)
and second channel connected to an internal ring;
- Mode B: First channel connected to an external ring by a DTE connector
and second channel connected to an internal ring;
- Mode C: First channel connected to an internal left ring and second
channel connected to an internal right ring.rw Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.9 |
tokGroupManLinkLoopSetting the value of this attribute to ON instructs the
hardware of a FIBRONICS Token Ring repeater module to close the loop in the
direction of the external connection.rw Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.10 |
tokGroupManBusLoopSetting the value of this attribute to ON instructs the
hardware of a FIBRONICS Token Ring repeater module to close the loop in the
direction of the internal bus.rw Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.11 |
tokGroupAutoLinkLoopValue ON of this attribute signifies that a hardware loop has been auto-
matically closed by the hardwar of the FIBRONICS Token Ring repeater
as a result of problems on the external link.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.12 |
tokGroupAutoBusLoopValue ON of this attribute signifies that a hardware loop has been auto-
matically closed by the hardware of the FIBRONICS Token Ring repeater
as a result of problems on the internal bus.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.1.1.13 |
tokGroupSpecificOIDThis attribute provides the OID of another group containing
additional more specific information regarding this instance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.13.2.1.1.14 |
tokGroupRingTable SEQUENCE OF TokGroupRingEntry .1.3.6.1.4.1.22.101.2.2.13.2.2 |
tokGroupRingEntry TokGroupRingEntry .1.3.6.1.4.1.22.101.2.2.13.2.2.1 |
tokGroupRingGroupIdID of the group to which the ring belongs.ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.2.2.1.1 |
tokGroupRingIdID of the ring.ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.2.2.1.2 |
tokGroupRingSpeedAttribute describing the bandwidth of the ring.rw Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.2.1.3 |
tokGroupRingInsertedIndicates that the bridge interface has inserted itself into
the ring.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.2.2.1.4 |
tokPort OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.13.3 |
tokPortTable SEQUENCE OF TokPortEntry .1.3.6.1.4.1.22.101.2.2.13.3.1 |
tokPortEntry TokPortEntry .1.3.6.1.4.1.22.101.2.2.13.3.1.1 |
tokPortGroupIdID of the group to which the token ring port belongs.ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.3.1.1.1 |
tokPortIdID of the port in the tokPortTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.13.3.1.1.2 |
tokPortBypassSetting the value of this attribute to ON causes the by-
passing of the TokenRing FIBRONICS port.rw Enumeration .1.3.6.1.4.1.22.101.2.2.13.3.1.1.3 |
tokPortConnectedAttribute which describes the connection status of a Token Ring port
(inclusion of the Token Ring controller in the ring).ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.3.1.1.4 |
tokPortTCPSetting the value of this attribute to ON causes the activation of the
cable-fault detection mechanism.rw Enumeration .1.3.6.1.4.1.22.101.2.2.13.3.1.1.5 |
tokPortCableFaultValue ON of this attribute signifies the detection of a cable-fault on
this specific Token Ring port.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.3.1.1.6 |
tokPortFunctionalStatusThe value of this attribute reflects the functional status of FIBRONICS
Token Ring ports. Note that it is not mandatory that a certain port
support all the enumerated states. Here is the lest of the possible
states:
OK - fully functional port, transmitting and receiving packets.
RLD - receive link down condition on the port.
TLD - transmit link down condition on the port.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.3.1.1.7 |
tokPortLastSourceAddrMAC source address of the last readable frame received by this
port.ro OCTET STRING .1.3.6.1.4.1.22.101.2.2.13.3.1.1.8 |
tokPortSpecificOIDThis attribute provides the OID of another group containing
additional more specific information regarding this instance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.13.3.1.1.9 |
tokPortRingSpeedErrorThis attribute is set to 'on' when the station tries to enter
the ring with the speed different from the ring's one.ro Enumeration .1.3.6.1.4.1.22.101.2.2.13.3.1.1.10 |
ts OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.14 |
tsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.14.1 |
tsGroupTable SEQUENCE OF TsGroupEntry .1.3.6.1.4.1.22.101.2.2.14.1.1 |
tsGroupEntry TsGroupEntry .1.3.6.1.4.1.22.101.2.2.14.1.1.1 |
tsGroupIdNumber of the slot in which the group is installed.ro INTEGER .1.3.6.1.4.1.22.101.2.2.14.1.1.1.1 |
tsGroupLATStatusValue ON of this attribute means that LAT protocol is Enabled on the
FIBRONICS Ethernet module.ro Enumeration .1.3.6.1.4.1.22.101.2.2.14.1.1.1.2 |
tsGroupOperationModeThis attribute describes the operation mode of the module in a
multiprocessor configuration sensor, as reported by interprocessors
communication.ro Enumeration .1.3.6.1.4.1.22.101.2.2.14.1.1.1.3 |
ltalk OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.15 |
ltalkPort OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.15.1 |
ltalkPortTable SEQUENCE OF LtalkPortEntry .1.3.6.1.4.1.22.101.2.2.15.1.1 |
ltalkPortEntry LtalkPortEntry .1.3.6.1.4.1.22.101.2.2.15.1.1.1 |
ltalkPortGroupIdNumber of the group to which the port belongs.ro INTEGER .1.3.6.1.4.1.22.101.2.2.15.1.1.1.1 |
ltalkPortIdID of the port in the ltalkPortTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.15.1.1.1.2 |
ltalkPortTestA value ON of this attribute indicates that a port test should be
performed upon the port defined by the attribute instance.rw Enumeration .1.3.6.1.4.1.22.101.2.2.15.1.1.1.3 |
ltalkPortTestResultIndicates the result of a port test performed on this port.ro Enumeration .1.3.6.1.4.1.22.101.2.2.15.1.1.1.4 |
ltalkPortJamAn ON value of this attribute indicates a Jam error on the specific
port.ro Enumeration .1.3.6.1.4.1.22.101.2.2.15.1.1.1.5 |
cl OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.16 |
clGroup OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.16.1 |
clGroupTable SEQUENCE OF ClGroupEntry .1.3.6.1.4.1.22.101.2.2.16.1.1 |
clGroupEntry ClGroupEntry .1.3.6.1.4.1.22.101.2.2.16.1.1.1 |
clGroupIdNumber of the slot in which the group is installed.ro INTEGER .1.3.6.1.4.1.22.101.2.2.16.1.1.1.1 |
clGroupClockRedundancyValue ON of this attribute defines a redundancy (backup) relationship
between the internal and external clocks on the LCL100 module.rw Enumeration .1.3.6.1.4.1.22.101.2.2.16.1.1.1.2 |
clGroupMainClockValue of this attribute is an index into clPortTable, and defines the
clock that should operate or a main clock in redundancy scheme.
Serves as 'Clock selection' switch on the card.rw INTEGER .1.3.6.1.4.1.22.101.2.2.16.1.1.1.3 |
clGroupTestClocksA value ON of this attribute indicates that a test should be
performed on all clock ports.rw Enumeration .1.3.6.1.4.1.22.101.2.2.16.1.1.1.4 |
clPort OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.16.2 |
clPortTable SEQUENCE OF ClPortEntry .1.3.6.1.4.1.22.101.2.2.16.2.1 |
clPortEntry ClPortEntry .1.3.6.1.4.1.22.101.2.2.16.2.1.1 |
clPortGroupIdNumber of the group to which the port belongs.ro INTEGER .1.3.6.1.4.1.22.101.2.2.16.2.1.1.1 |
clPortIdID of the port in the clPortTable.ro INTEGER .1.3.6.1.4.1.22.101.2.2.16.2.1.1.2 |
clPortFunctionalStatusIndicates whether the clock is faulty or not.ro Enumeration .1.3.6.1.4.1.22.101.2.2.16.2.1.1.3 |
fbrOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17 |
lBoxOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17.1 |
lUnknownBoxOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17.1.1 |
lLET18BoxOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17.1.2 |
lLET3BoxOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17.1.3 |
lLET36BoxOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17.1.4 |
lLET18EBoxOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17.1.5 |
lLERT40BoxOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17.1.6 |
lLET10BoxOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17.1.7 |
lFDX100BoxOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17.1.8 |
lSTACKBoxOID OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.17.1.9 |
fbrSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.18 |
fbrLanSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.19 |
lse OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.19.1 |
lseGroupTable SEQUENCE OF LseGroupEntry .1.3.6.1.4.1.22.101.2.2.19.1.1 |
lseGroupEntry LseGroupEntry .1.3.6.1.4.1.22.101.2.2.19.1.1.1 |
lseGroupIdSlot number in which the group is installed.ro INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.1.1.1 |
lseGroupFastOpenSetting the value of this attribute to ON activates the port for short idle time
when code violation was detected.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.1.1.2 |
lseGroup10MSqltSetting the value of this attribute to ON activates the mechanism of detection
preamble of 10Mhz.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.1.1.3 |
lseGroupSmartSqltControl the mechnism of the input sensitivity of the port.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.1.1.4 |
lseGroupCParameterDefines the number of consecutive collisions the port waits before it ceases transmitting
of 512 bits time toward the station.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.1.1.5 |
lseGroupIPGJamLengthDefines the IPG jam length in Ethernet bit time (100nS) start at 16 bit time in steps of 16 to 112 bit
time. Any number between the defined values will take to nearest smaller value.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.1.1.6 |
lseGroupJamLengthDefines the Jam Length in time start from 8 (800micro-seconds) to 120 (12mili-seconds).
Each step of 8 is equal 800micro-seconds.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.1.1.7 |
lseGroupDataBlinderLengthDefines the Data Blinder Length in Ethernet bit time (100nS) start at 48 bit time in steps of
8 to 120 bit time. Any number between the defined values will take to nearest smaller valuerw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.1.1.8 |
lseGroupIPGDataLengthDefines the IPG data length in Ethernet bit time (100nS) start at 48 bit time in steps of 8 to
120 bit time. Any number between the defined values will take to nearest smaller value.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.1.1.9 |
lseGroupActiveMonitorThis attribute defines the status of the module which is the high-speed bus active monitor.ro Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.1.1.10 |
lseGroupBackBoneThe board is in the Backbone Mode.
lse208 - upper subgroup is RX only (ports 1-4) and lower subgroup is TX to line only.
lse808 - the first port is RX from line only, the second - TX to line only, the rest are in regular
10BaseT mode.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.1.1.11 |
lseGroupSetDefaultsSet all hardware parameters to their default values.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.1.1.12 |
lseIntPort OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.19.1.2 |
lseIntPortTable SEQUENCE OF LseIntPortEntry .1.3.6.1.4.1.22.101.2.2.19.1.2.1 |
lseIntPortEntryAn entry in the table, containing data about a single internal LanSwitch bank. LseIntPortEntry .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1 |
lseIntPortGroupIdId of the group to which the port belongs.ro INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.1 |
lseIntPortIdNumber of LanSwitch port in the board.ro INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.2 |
lseIntPortIOModeAll packets on the high-speed bus that were not captured by any regular port are captured
by the I/O port.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.3 |
lseIntPortResetSwitchCAMActing like toggle switch thus always returns OFFrw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.4 |
lseIntPortVideoPacketSet all Tx packets toward the high-speed bus to video type packets.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.5 |
lseIntPortPriorityStateMachineSetting the value of this attribute to ON activates the priority mechanism.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.6 |
lseIntPortActiveBroadcastPrioritySetting the value of this attribute to ON activates the active broadcast mode in priority
mechanism.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.7 |
lseIntPortPriorityLevelThis attribute defines the priority levels of Tx packets toward the high-speed bus.
The highest priority is broadcast.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.8 |
lseIntPortSuperPriorityEnableThe value ON defines the retry parameter for the priority level mechanism.ro Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.9 |
lseIntPortRoutingModeGeneric - examines all the packets that are not members of any virtual network.
Net - examines only the packets that have the port's network number.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.10 |
lseIntPortGlobalPort in a network routing mode that examines all packets that are not members of all
virtual networks.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.11 |
lseIntPortLearnIOCAMThe ability of an I/O port to learn incoming MAC addresses received in its port and
store them in its CAM. The CAM is limited to total of 8 MAC addresses.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.12 |
lseIntPortSecuritySetting the value of this attribute to ON activates the security mode.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.13 |
lseIntPortIgnoreBusySetting the value of this attribute to ON activates the ignore busy mode.
The busy signal toward the high-speed bus is not activated even though the TX buffer is full.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.14 |
lseIntPortRetryPriorityLevel1The port increases the priority level of the high-speed bus packets after the defined number
(1..32) trials.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.15 |
lseIntPortRetryPriorityLevel2The port increases the priority level of the high-speed bus packets after the defined number
(1..32) trials.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.16 |
lseIntPortRetryPriorityLevel3The port increases the priority level of the high-speed bus packets after the defined number
(1..32) trials.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.17 |
lseIntPortIgnoreProtocolTypeAny packet regardless of thye protocol type is received from the high-speed bus.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.18 |
lseIntPortCompanyMACThe attribute defines the first three bytes of the MAC address of the video host server.rw OCTET STRING .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.19 |
lseIntPortTxSafetyZoneDefines the Tx Safety Zone in bits.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.20 |
lseIntPortRxSafetyZoneDefines the Rx Safety Zone in bits.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.21 |
lseIntPortTxBurstLengthDefines the TX Burst Length in bits.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.22 |
lseIntPortSecurityIntruderThe value ON of this attribute reflects a security violation occurrence.ro Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.23 |
lseIntPortJabberValue ON of this attribute reflects the jabber transmitted to the port by the high-speed bus.ro Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.24 |
lseIntPortCAMFifty six bytes of MAC addresses. Each byte with the port number is followed by six byte MAC
address.rw OCTET STRING ( SIZE (56)) .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.25 |
lseIntPortVideoStateMachineSetting the value of this attribute to ON activates the video state machine mode.
Received packets are filtered by demand from the station.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.26 |
lseIntPortTransmitWeightDefines the Transmit Weight of the frames toward the high-speed bus.rw INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.2.1.1.27 |
lsePort OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.19.1.3 |
lsePortTable SEQUENCE OF LsePortEntry .1.3.6.1.4.1.22.101.2.2.19.1.3.1 |
lsePortEntryAn entry in the table containing data about a single external switch port. LsePortEntry .1.3.6.1.4.1.22.101.2.2.19.1.3.1.1 |
lsePortGroupIdId of the group to which the port belongs.ro INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.3.1.1.1 |
lsePortIdNumber of LanSwitch port in the board.ro INTEGER .1.3.6.1.4.1.22.101.2.2.19.1.3.1.1.2 |
lsePortPolaritySetting the value of this attribute to ON activates the automatic port polarity
detection mode.rw Enumeration .1.3.6.1.4.1.22.101.2.2.19.1.3.1.1.3 |
deviceMgr OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.20 |
bRouter OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.21 |
iwb OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.21.1 |
iwr OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.21.2 |
iwrGroupTableAttributes pertaining to the module. SEQUENCE OF IwrGroupEntry .1.3.6.1.4.1.22.101.2.2.21.2.1 |
iwrGroupEntryAn entry in the table. IwrGroupEntry .1.3.6.1.4.1.22.101.2.2.21.2.1.1 |
iwrGroupIdSlot number in which the module is located.ro INTEGER .1.3.6.1.4.1.22.101.2.2.21.2.1.1.1 |
iwrOperStateOne of the possible states of the module.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.2.1.1.2 |
iwrPMStateThe state of the Processor Module.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.2.1.1.3 |
iwrIOMStateThe state of the Input/Output Module.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.2.1.1.4 |
iwrWANTableWAN data table. SEQUENCE OF IwrWANEntry .1.3.6.1.4.1.22.101.2.2.21.2.2 |
iwrWANEntryEntry in the table. IwrWANEntry .1.3.6.1.4.1.22.101.2.2.21.2.2.1 |
iwrWANGroupIdSlot number in which the module is located.ro INTEGER .1.3.6.1.4.1.22.101.2.2.21.2.2.1.1 |
iwrWANPortIdWAN port index.ro INTEGER .1.3.6.1.4.1.22.101.2.2.21.2.2.1.2 |
iwrWANConnectionWAN connection status.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.2.2.1.3 |
iwrWANPortCableTypeCable type connected to the specified WAN port.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.2.2.1.4 |
itr OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.21.3 |
itrGroupTableTable of attributes pertaining to the ITRE module. SEQUENCE OF ItrGroupEntry .1.3.6.1.4.1.22.101.2.2.21.3.1 |
itrGroupEntryAn entry in the table. ItrGroupEntry .1.3.6.1.4.1.22.101.2.2.21.3.1.1 |
itrGroupIdSlot number in which the module is located.ro INTEGER .1.3.6.1.4.1.22.101.2.2.21.3.1.1.1 |
itrMainSWVersionSoftware version of the main CPU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22.101.2.2.21.3.1.1.2 |
itrConfigStateConfiguration state of the module.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.1.1.3 |
itrModuleStateState of the ISTC/IFTC modules.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.1.1.4 |
itrLinkTableITRE links table. SEQUENCE OF ItrLinkEntry .1.3.6.1.4.1.22.101.2.2.21.3.2 |
itrLinkEntryEntry in the table. ItrLinkEntry .1.3.6.1.4.1.22.101.2.2.21.3.2.1 |
itrLinkGroupIdSlot number in which the module is located.ro INTEGER .1.3.6.1.4.1.22.101.2.2.21.3.2.1.1 |
itrLinkPortIdLink identifier.ro INTEGER .1.3.6.1.4.1.22.101.2.2.21.3.2.1.2 |
itrLinkIfInterface type.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.2.1.3 |
itrLinkModeSynchronous or asynchronous modes on the link.rw Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.2.1.4 |
itrLinkAsyncRatePossible link speeds that can be set in asynchronous mode.rw Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.2.1.5 |
itrLinkSyncRateLink speeds in synchronous mode.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.2.1.6 |
itrLinkParityThis attribute enables/disables parity checking.rw Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.2.1.7 |
itrLinkParityEvenOddEven or odd parity.rw Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.2.1.8 |
itrLinkStopBitNumber of stop bits (1 or 2 ) in asynchronous mode. The value 'none'
is returned in synchronous mode.rw Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.2.1.9 |
itrLinkRemoteLANConnThis attribute shows whether the remote ITRE is connected to the LAN.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.2.1.10 |
itrLinkFunctionalStatusThe attribute represents the status of the WAN link.ro Enumeration .1.3.6.1.4.1.22.101.2.2.21.3.2.1.11 |
probe OBJECT IDENTIFIER .1.3.6.1.4.1.22.101.2.2.22 |