HUAWEI-SEP-MIB
AI MIB Summary
The HUAWEI-SEP-MIB module provides vendor-specific SNMP access to monitor and manage Huawei Secure Edge Platform (SEP) session states, including active session counts, connection throughput, and security policy hit statistics. This private MIB under the `hwDatacomm` enterprise OID enables granular visibility into the performance and security posture of the SEP firewall or security gateway.
The private mib file includes the general extent information of the device.hwDatacomm(165).hwSepMIB.
Main OID:
hwSepMIB.1.3.6.1.4.1.2011.5.25.223
75
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
75 total| Object Name |
|---|
hwSepMIBThe private mib file includes the general extent
information of the device.hwDatacomm(165).hwSepMIB. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.223 |
IF-MIBThe private mib file includes the general extent
information of the device.hwDatacomm(165).hwSepMIB. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.223 |
hwSepObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.223.1 |
hwSepResetPktCntReset the packet counter of all running SEP ports.
The value of hwSepResetPktCnt is unused(65535) when it is read.
The value of hwSepResetPktCnt must be clear(1) when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.223.1.1 |
hwSepSegmentTableThe table includes the information of SEP segments. SEQUENCE OF HwSepSegmentEntry .1.3.6.1.4.1.2011.5.25.223.1.2 |
hwSepSegmentEntryThe table includes the information of SEP segments.
The index of the table is SEP segment id. HwSepSegmentEntry .1.3.6.1.4.1.2011.5.25.223.1.2.1 |
hwSepSegmentIdSEP segment Identifier. Integer32 .1.3.6.1.4.1.2011.5.25.223.1.2.1.1 |
hwSepControlVlanIdThe control VLAN identifier of the SEP segment.
If the value of the object is set 0, the operation is delete configuration.rw Integer32 (0 | 1..4094) .1.3.6.1.4.1.2011.5.25.223.1.2.1.2 |
hwSepPreemptManualTrigger the manual preemption by setting the object to be 1.
When getting the object it will always be 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.223.1.2.1.3 |
hwSepPreemptDelayThe preemption delay timer of the SEP segment.
If the value of the object is set 0, the operation is delete configuration.rw Integer32 (0 | 15..600) .1.3.6.1.4.1.2011.5.25.223.1.2.1.4 |
hwSepBlockPortModeThe way to choose the port to be blocked.
if the value of the object is set 1, the optimal port.
if the value of the object is set 2, the middle port.
if the value of the object is set 3, the port with the designated hop(hwSepBlockPortHop).
if the value of the object is set 4, the port with the designated system name(hwSepBlockPortSysname) and port name(hwSepBlockPortIfname).
if the value of the object is set 5, the operation is delete configuration of the block port.
BlockPortMode | BlockPortValue
| active inactive
optimal(1) | (1) (2/3/4)
middle(2) | (2) (1/3/4)
hop(3) | (3)(hwSepBlockPortHop) (1/2/4)
name(4) | (4)(hwSepBlockPortSysname & hwSepBlockPortIfname) (1/2/3)rw Enumeration .1.3.6.1.4.1.2011.5.25.223.1.2.1.5 |
hwSepBlockPortHopThe hop count of the preffered blocking port.
If the value of the object is set 0, the operation is delete configuration.
If the mode of block port is not hop(3), the value is not have effect.rw Integer32 (0 | 1..512) .1.3.6.1.4.1.2011.5.25.223.1.2.1.6 |
hwSepBlockPortSysnameThe system name of the preffered blocking port.
if not set the value of hwSepBlockPortIfname, this configuration is not take effect.
if the mode of block port is not name(4), this configuration is not task effect.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.2.1.7 |
hwSepBlockPortIfnameThe interface name of the preffered blocking port.
if not set the value of hwSepBlockPortSysname, this configuration is not take effect.
if the mode of block port is not name(4), this configuration is not take effect.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.2.1.8 |
hwSepTcNotifySepThe bitmap of the SEP segments to which the topology change event will be notifiedrw OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.2.1.9 |
hwSepTcNotifyRrppIf set 1, the topology change event of the SEP segment will be notified to RRPPrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.223.1.2.1.10 |
hwSepTcNotifyStpIf set 1, the topology change event of the SEP segment will be notified to STPrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.223.1.2.1.11 |
hwSepTcNotifyVplsIf set 1, the topology change event of the SEP segment will be notified to VPLSrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.223.1.2.1.12 |
hwSepTcNotifyVllIf set 1, the topology change event of the SEP segment will be notified to VLLrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.223.1.2.1.13 |
hwSepTcNotifySmartLinkCtrlVlanIf set control vlan, the topology change event of the SEP segment will be notified to Smart-Link.
If the value of the object is set 0, the operation is delete configuration.rw Integer32 (0 | 1..4094) .1.3.6.1.4.1.2011.5.25.223.1.2.1.14 |
hwSepDealSmartLinkFlushIf set 1, the SEP segment will deal the smart link flush-FDB packetrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.223.1.2.1.15 |
hwSepProtectedInstanceListThe protected instance list of the SEP segmentrw OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.2.1.16 |
hwSepTcProtectionIntervalThe interval of tc-protection, the default value is 2.rw Integer32 .1.3.6.1.4.1.2011.5.25.223.1.2.1.17 |
hwSepSegmentDescriptionA textual description of the SEP segment.
It is mandatory that this only contain no more than 255 printable ASCII characters.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.2.1.18 |
hwSepSegmentRowStatusOperation of CreateAndGo can be used to create a new SEP segment,
and operation of Destroy be used to destroy an existent SEP segment.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.223.1.2.1.128 |
hwSepTopologyTableThe table includes the information of the topology of the SEP segment. SEQUENCE OF HwSepTopologyEntry .1.3.6.1.4.1.2011.5.25.223.1.3 |
hwSepTopologyEntryThe table includes the information of the topology of the SEP segment.
The index of the table is the segment identifier and the hop count of the port. HwSepTopologyEntry .1.3.6.1.4.1.2011.5.25.223.1.3.1 |
hwSepHopThe hop count of the port. Integer32 .1.3.6.1.4.1.2011.5.25.223.1.3.1.1 |
hwSepPortIdThe port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the devicero OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.3.1.2 |
hwSepTopoSysnameThe system name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.3.1.3 |
hwSepTopoPortnameThe port name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.3.1.4 |
hwSepTopoPortConfigPriorityThe configured port priority.The default value is 64.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.3.1.5 |
hwSepTopoPortActivePriorityThe active port priority.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.3.1.6 |
hwSepTopoConfigPortRoleThe configued port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0x32ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.3.1.7 |
hwSepTopoActivePortRoleThe active port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0x32ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.3.1.8 |
hwSepTopoPortNbrStateThe state of the neighbor state machine:
state value
down 1
init 2
preup 3
up 4
conflict 5ro Enumeration .1.3.6.1.4.1.2011.5.25.223.1.3.1.9 |
hwSepTopoBrotherPortIdThe brother port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the devicero OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.3.1.10 |
hwSepTopoNbrPortIdThe neighbor port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the devicero OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.3.1.11 |
hwSepTopoPortLinkStateThe link state of the port:
state value
link down 1
link up 2ro Enumeration .1.3.6.1.4.1.2011.5.25.223.1.3.1.12 |
hwSepTopoPortFwdStateThe forwarding state of the port:
state value
discarding 1
forwarding 2ro Enumeration .1.3.6.1.4.1.2011.5.25.223.1.3.1.13 |
hwSepPortTableThe table includes the information of SEP ports SEQUENCE OF HwSepPortEntry .1.3.6.1.4.1.2011.5.25.223.1.4 |
hwSepPortEntryThe table includes the information of SEP ports.
The index of the table is SEP segment identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4.
If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port.
the other port identifier is for extension and not used currently, should be set 0. HwSepPortEntry .1.3.6.1.4.1.2011.5.25.223.1.4.1 |
hwSepPortTypeThe port type.Currently SEP just support ethernet port and the value is 1. Unsigned32 (1) .1.3.6.1.4.1.2011.5.25.223.1.4.1.1 |
hwSepPortId1The port identifier1, when the hwSepPortType is 1, the value of the object is the IfIndex of the port. Unsigned32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.2 |
hwSepPortId2The port identifier2, Currently it is not used and only for extension, should be set 0. Unsigned32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.3 |
hwSepPortId3The port identifier3, Currently it is not used and only for extension, should be set 0. Unsigned32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.4 |
hwSepPortId4The port identifier4, Currently it is not used and only for extension, should be set 0. Unsigned32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.5 |
hwSepSysnameThe system name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.4.1.6 |
hwSepPortnameThe port namero OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.4.1.7 |
hwSepPortConfigPriorityThe configured port priority.The default value is 64.rw Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.8 |
hwSepPortActivePriorityThe active port priority.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.9 |
hwSepConfigPortRoleThe configued port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0x32rw Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.10 |
hwSepActivePortRoleThe active port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0x32ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.11 |
hwSepPortNbrStateThe state of the neighbor state machine:
state value
down 1
init 2
preup 3
up 4
conflict 5ro Enumeration .1.3.6.1.4.1.2011.5.25.223.1.4.1.12 |
hwSepNbrPortIdThe identifier of the neighbor port. For example: 00.E0.6E.70.23.00.00.00 (hex)ro OCTET STRING .1.3.6.1.4.1.2011.5.25.223.1.4.1.13 |
hwSepPortFwdStateThe forwarding state of the port:
state value
discarding 1
forwarding 2ro Enumeration .1.3.6.1.4.1.2011.5.25.223.1.4.1.14 |
hwSepRxNbrPktCntThe number of received neighbor packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.15 |
hwSepTxNbrPktCntThe number of transmited neighbor packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.16 |
hwSepRxLsaInfoPktCntThe number of received LSA information packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.17 |
hwSepTxLsaInfoPktCntThe number of transmitted LSA information packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.18 |
hwSepRxLsaAckPktCntThe number of received LSA acknowledgement packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.19 |
hwSepTxLsaAckPktCntThe number of transmitted LSA acknowledgement packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.20 |
hwSepRxPreemptReqPktCntThe number of received preemption request packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.21 |
hwSepTxPreemptReqPktCntThe number of transmitted preemption request packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.22 |
hwSepRxPreemptAckPktCntThe number of received preemption acknowledgement packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.23 |
hwSepTxPreemptAckPktCntThe number of transmitted preemption acknowledgement packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.24 |
hwSepRxTcPktCntThe number of received topology change packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.25 |
hwSepTxTcPktCntThe number of transmitted topology change packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.26 |
hwSepRxEpaPktCntThe number of received topology change packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.27 |
hwSepTxEpaPktCntThe number of transmitted topology change packets.ro Integer32 .1.3.6.1.4.1.2011.5.25.223.1.4.1.28 |
hwSepResetPortPktCntReset the packet counter of the port in the SEP segment.
The value of hwSepResetPktCnt is unused(65535) when it is read.
The value of hwSepResetPktCnt must be clear(1) when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.223.1.4.1.29 |
hwSepPortRowStatusOperation of CreateAndGo can be used to have a port join the SEP segment.
and operation of Destroy be used to have a port leave the SEP segment.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.223.1.4.1.128 |
hwSepGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.223.2 |
hwSepConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.223.3 |
hwSepCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.223.3.1 |