HUAWEI-RRPP-MIB
AI MIB Summary
The HUAWEI-RRPP-MIB enables monitoring and management of Huawei Layer 2 Ethernet ring topologies by exposing RRPP-specific counters and status variables, including ring node states, link failure events, and protection switching timers, to facilitate sub-second convergence verification.
The RRPP (Rapid Ring Protection protocol) provides fast protection switching to layer 2 switches interconnected in an Ethernet ring topology. When a link in the ring breaks, the RRPP can recover the data path quickly. Its protection switching is similar to what can be achieved with the Spanning Tree Protocol (STP), but the converging time is less than a second after link failure. This MIB defines management information used on products which support RRPP.
Main OID:
hwRrpp.1.3.6.1.4.1.2011.5.25.113
87
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
87 total| Object Name |
|---|
hwRrppThe RRPP (Rapid Ring Protection protocol) provides
fast protection switching to layer 2 switches
interconnected in an Ethernet ring topology. When
a link in the ring breaks, the RRPP can recover the
data path quickly. Its protection switching is
similar to what can be achieved with the Spanning
Tree Protocol (STP), but the converging time is less
than a second after link failure.
This MIB defines management information used on
products which support RRPP. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.113 |
hwRrppScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.113.1 |
hwRrppEnableStatusIndicating whether the RRPP is enabled on this switch.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.113.1.1 |
hwRrppLinkupDelayTimeThis value indicates the delay when ports change to Up.
The value of this node ranges with products.
The default value is 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.113.1.2 |
hwRrppTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.113.2 |
hwRrppDomainTableA table containing information about configurations
and status of a RRPP domain. SEQUENCE OF HwRrppDomainEntry .1.3.6.1.4.1.2011.5.25.113.2.1 |
hwRrppDomainEntryDetailed information of a specified RRPP domain. HwRrppDomainEntry .1.3.6.1.4.1.2011.5.25.113.2.1.1 |
hwRrppDomainIDAn index uniquely identifies a RRPP domain.
This value can't be modified after created. Integer32 .1.3.6.1.4.1.2011.5.25.113.2.1.1.1 |
hwRrppDomainControlVlanIDIndex of the control VLAN specified to a domain.
The value 65535 indicates the control VLAN has
not been configured.
The VLAN assigned to a RRPP Domain must not have
been created.
This value can't be modified after created.rw Integer32 (1..4093 | 65535) .1.3.6.1.4.1.2011.5.25.113.2.1.1.2 |
hwRrppDomainHelloTimeThe value indicates the interval between two hello
packets sent by master-node, and its unit is second.
The value ranges from 1s~10s.rw Integer32 .1.3.6.1.4.1.2011.5.25.113.2.1.1.3 |
hwRrppDomainFailTimeThe expiration value of the fail-period timer and its unit
is second. If not receiving hello packets before this
expires, the master-node considers the ring is broken.
The value of this node ranges with products, which must
not be less than triple hwRrppDomainHelloTime's value.rw Integer32 .1.3.6.1.4.1.2011.5.25.113.2.1.1.4 |
hwRrppDomainRowStatusThis object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.113.2.1.1.5 |
hwRrppDomainResetStatisticsClears the statistics of packets received and sent on the current domain.rw Enumeration .1.3.6.1.4.1.2011.5.25.113.2.1.1.6 |
hwRrppMulSubRingProtectionIndicating whether the rrpp mul-sub-ring protection is enabled on this switch.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.113.2.1.1.7 |
hwRrppDomainProtectedVlanInformation of instance index protected by a domain.
The instance index ranging from 0 to 48
is listed in a character string in order.
The value of each character can be either 0 or 1.
Character 0 indicates that the corresponding instance is not proteced
while character 1 indicates that the corresponding instance is proteced.
For example, set character string 00101 to protect instance 2 and instance 4,
and not to protect the rest of instances.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.113.2.1.1.8 |
hwRrppDomainDescriptionA textual description of the RRPP domain.
It is mandatory that this only contain no more than 255 printable ASCII characters.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.113.2.1.1.9 |
hwRrppRingTableA table containing information about configurations
and status of a RRPP Ring. SEQUENCE OF HwRrppRingEntry .1.3.6.1.4.1.2011.5.25.113.2.2 |
hwRrppRingEntryDetailed information of a specified RRPP Ring. HwRrppRingEntry .1.3.6.1.4.1.2011.5.25.113.2.2.1 |
hwRrppRingIDAn index uniquely identifies a RRPP Ring.
This value can't be modified after created. Integer32 .1.3.6.1.4.1.2011.5.25.113.2.2.1.1 |
hwRrppRingEnableStatusIndicating whether the RRPP is enabled on this Ring.
NOTE: If major-ring and sub-ring(s) of a domain
coexist on a switch, major-ring must be enabled
before sub-ring is enabled. And sub-ring must be
disabled before major-ring is disabled.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.113.2.2.1.2 |
hwRrppRingActiveAs both hwRrppEnableStatus and hwRrppRingEnableStatus
are enabled, the ring is activated. Whereas either of
the two items is disabled, the ring is inactive.ro Enumeration .1.3.6.1.4.1.2011.5.25.113.2.2.1.3 |
hwRrppRingStateThe status (i.e. unknown, health or fault) of the Ethernet
ring.ro Enumeration .1.3.6.1.4.1.2011.5.25.113.2.2.1.4 |
hwRrppRingNodeModeThere are four RRPP node modes for the switch on a RRPP
ring, such as master, transit, edge and assistant-edge.
Each RRPP ring has a single designated master-node. All
other nodes except edge-node and assistant-edge-node on
that ring are referred to as transit-nodes.
The node mode of edge and assistant-edge should be
configured only on sub-ring. When there is a common link
between a sub-ring and its major-ring, the node mode of
the sub-ring must be edge or assistant-edge, and they must
be configured in pairs.
If node mode is designated as edge or assistant-edge,
several points should be noticed:
Major-ring must be created before a sub-ring is created;
Major-ring can't be deleted unless all its sub-rings are
deleted;
The node mode of the switch on major-ring must be
transit;
Major-ring and sub-ring must have only a common port.
This value can't be modified after created.rw Enumeration .1.3.6.1.4.1.2011.5.25.113.2.2.1.5 |
hwRrppRingPrimaryPortIf the switch is a master-node or transit-node, this value
is ifIndex of the primary port; otherwise, if the switch is an
edge-node or assistant-edge-node, this value is ifIndex of the common
port.
This value is 0, if the port doesn't exist.
This value can't be modified after created.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.113.2.2.1.6 |
hwRrppRingSecondaryPortIf the switch is a master-node or transit-node, this value
is ifIndex of the secondary port; otherwise, if the switch is
an edge-node or assistant-edge-node, this value is ifIndex of the edge
port.
This value is 0, if the port doesn't exist.
This value can't be modified after created.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.113.2.2.1.7 |
hwRrppRingLevelLevel of a ring. This field should be set 0 on major-ring
and 1 on the sub-ring.
This value can't be modified after created.rw Enumeration .1.3.6.1.4.1.2011.5.25.113.2.2.1.8 |
hwRrppRingRowStatusThis object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.
To create a new row, hwRrppRingNodeMode,
hwRrppRingPrimaryPort, hwRrppRingSecondaryPort and
hwRrppRingLevel must be specified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.113.2.2.1.9 |
hwRrppRingResetStatisticsClears the statistics of packets received and sent on the current ring.rw Enumeration .1.3.6.1.4.1.2011.5.25.113.2.2.1.10 |
hwRrppPortTableA table containing information about configurations and
status of a RRPP port. SEQUENCE OF HwRrppPortEntry .1.3.6.1.4.1.2011.5.25.113.2.3 |
hwRrppPortEntryDetailed information of a specified RRPP port. HwRrppPortEntry .1.3.6.1.4.1.2011.5.25.113.2.3.1 |
hwRrppPortIDLogical index of the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.113.2.3.1.1 |
hwRrppPortTypeThe interface type of the RRPP port.
(i.e. FE, GE, VE, Eth-Trunk, XGE and etc).ro Enumeration .1.3.6.1.4.1.2011.5.25.113.2.3.1.2 |
hwRrppPortRoleThe RRPP role of the port.
(i.e. primary, secondary, common or edge port).ro Enumeration .1.3.6.1.4.1.2011.5.25.113.2.3.1.3 |
hwRrppPortStateState of RRPP port, including unknown, unblocked, blocked
and down.ro Enumeration .1.3.6.1.4.1.2011.5.25.113.2.3.1.4 |
hwRrppPortRXErrorThe statistics of illegal RRPP packets received from
this port.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.5 |
hwRrppPortRXHelloThe statistics of hello packets received from
this port on specified ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.6 |
hwRrppPortRXLinkUpThe statistics of link-up packets received
from this port on specified ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.7 |
hwRrppPortRXLinkDownThe statistics of link-down packets received
from this port on specified ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.8 |
hwRrppPortRXCommonFlushThe statistics of common-flush packets received from
this port on specified ring.
Instruction
When master-node receives valid link-down packets
or link-up packets, it will send common-flush packets,
instructing the other nodes on the ring to flush their
forwarding database.
When the nodes except master-node receive common-flush,
they will flush forwarding database. If there is any
port blocked on that node, it won't be unblocked.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.9 |
hwRrppPortRXCompleteFlushThe statistics of complete-flush packets received
from this port on specified ring.
Instruction
When the ring recovers, master-node will receive its own
hello packets. It will send complete-flush packets,
instructing the other nodes on the ring to flush their
forwarding database.
When the nodes except master-node receive complete-flush,
they will flush forwarding database. If there is any port
blocked on that node, it will be unblocked.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.10 |
hwRrppPortRXEdgeHelloThe statistics of edge-hello packets received
from this port on specified ring.
Instruction
When edge-node sends edge-hello packets,
assistantEdge-node will receive its own edge-hello
packets from the common link and the master ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.11 |
hwRrppPortRXMajorFaultThe statistics of major-fault packets received
from this port on specified ring.
Instruction
When assistantEdge can't receive edge-hello packets
in the specified fault-time,
assistantEdge-node will send its own major-fault
packets from the edge port around the sub ring.
Edge-node will receive the major-fault packets from
its edge port. Then Edge-node will block its edge port.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.12 |
hwRrppPortTXErrorThe statistics of RRPP packets failed to send out of
this port.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.13 |
hwRrppPortTXHelloThe statistics of hello packets sent from
this port on specified ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.14 |
hwRrppPortTXLinkUpThe statistics of link-up packets sent
from this port on specified ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.15 |
hwRrppPortTXLinkDownThe statistics of link-down packets sent
from this port on specified ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.16 |
hwRrppPortTXCommonFlushThe statistics of common-flush packets sent from
this port on specified ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.17 |
hwRrppPortTXCompleteFlushThe statistics of complete-flush packets sent
from this port on specified ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.18 |
hwRrppPortTXEdgeHelloThe statistics of edge-hello packets sent
from this port on specified ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.19 |
hwRrppPortTXMajorFaultThe statistics of major-fault packets sent
from this port on specified ring.ro Counter32 .1.3.6.1.4.1.2011.5.25.113.2.3.1.20 |
hwRrppTrackInterfaceTableA table containing information about tracking port. SEQUENCE OF HWRrppTrackInterfaceEntry .1.3.6.1.4.1.2011.5.25.113.2.4 |
hwRrppTrackInterfaceEntryDetailed information of a specified RRPP track interface. HWRrppTrackInterfaceEntry .1.3.6.1.4.1.2011.5.25.113.2.4.1 |
hwRrppTrackInterfaceIDLogical index of track interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.113.2.4.1.1 |
hwRrppTrackRowStatusThis object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.113.2.4.1.2 |
hwRrppRingGroupTableA table containing information about an RRPP ring group and created without the domain or ring. SEQUENCE OF HwRrppRingGroupEntry .1.3.6.1.4.1.2011.5.25.113.2.5 |
hwRrppRingGroupEntryDetailed information about a specified RRPP ring group. HwRrppRingGroupEntry .1.3.6.1.4.1.2011.5.25.113.2.5.1 |
hwRrppRingGroupIDindex of the RRPP ring group.
This value can't be modified after created. Integer32 .1.3.6.1.4.1.2011.5.25.113.2.5.1.1 |
hwRrppRingGroupRowStatusRow status in the ring group configuration table.
hwRrppRingGroupID must be specified to create a row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.113.2.5.1.2 |
hwRrppRingGroupMemberTableA table containing information about the configurations and status of an RRPP ring. SEQUENCE OF HwRrppRingGroupMemberEntry .1.3.6.1.4.1.2011.5.25.113.2.6 |
hwRrppRingGroupMemberEntryDetailed information about a specified RRPP ring group. HwRrppRingGroupMemberEntry .1.3.6.1.4.1.2011.5.25.113.2.6.1 |
hwRrppRingGroupMemberDomainIDIndex, namely, domain ID of the members of a ring group.
This value cannot be modified after created. Integer32 .1.3.6.1.4.1.2011.5.25.113.2.6.1.1 |
hwRrppRingGroupMemberRingIDIndex, namely, ring ID of the members of a ring group.
This value cannot be modified after created. Integer32 .1.3.6.1.4.1.2011.5.25.113.2.6.1.2 |
hwRrppRingGroupIsEdgeHelloProcessFlag carried in the sent edge-Hello Packet.ro EnabledStatus .1.3.6.1.4.1.2011.5.25.113.2.6.1.3 |
hwRrppRingGroupMemberRowStatusRow status in the ring group configuration table.
hwRrppRingGroupMemberDomainID, hwRrppRingGroupMemberRingID,
and hwRrppRingGroupIsEdgeHelloSender must be specified to create a row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.113.2.6.1.4 |
hwRrppSnoopingTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.113.3 |
hwRrppSnoopingInterfaceTableA table containing information about RRPP snooping enable interface. SEQUENCE OF HwRrppSnoopingInterfaceEntry .1.3.6.1.4.1.2011.5.25.113.3.1 |
hwRrppSnoopingInterfaceEntryDetailed information of a specified RRPP snooping enable interface. HwRrppSnoopingInterfaceEntry .1.3.6.1.4.1.2011.5.25.113.3.1.1 |
hwRrppSnoopingInterfaceIdLogical index of the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.113.3.1.1.1 |
hwRrppSnoopingVsiNameThe name of VSI which the interface was binding to.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.113.3.1.1.2 |
hwRrppSnoopingVlanIdThe VLAN which the intertace added to.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.113.3.1.1.3 |
hwRrppSnoopingEnableStatusIndicating whether the RRPP snooping is enabled on this switch.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.113.3.1.1.4 |
hwRrppSnoopingRowStatusThis object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.113.3.1.1.5 |
hwRrppSnoopingAllVsiStatusIndicating whether the RRPP snooping is associating all vsi on this switch.
Options:
1. enabled(1) -indicates that the RRPP snooping is associated with all vsi
under the same main interface
2. disabled(2)-indicates that the RRPP snooping doesn't perform the command
to associated with all vsi under the same main interface
Default: disabledrw EnabledStatus .1.3.6.1.4.1.2011.5.25.113.3.1.1.6 |
hwRrppSnoopingVsiTableA table containing information about RRPP snooping relating interface. SEQUENCE OF HwRrppSnoopingVsiEntry .1.3.6.1.4.1.2011.5.25.113.3.2 |
hwRrppSnoopingVsiEntryDetailed information of a specified RRPP snooping relating interface. HwRrppSnoopingVsiEntry .1.3.6.1.4.1.2011.5.25.113.3.2.1 |
hwRrppSnoopingVsiInterfaceIdLogical index of the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.113.3.2.1.1 |
hwVsiNameThe name of VSI. OCTET STRING .1.3.6.1.4.1.2011.5.25.113.3.2.1.2 |
hwRrppSnoopingVsiRowStatusThis object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.113.3.2.1.3 |
hwRrppNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.113.4 |
hwRrppRingRecoverTrap message is generated by master-node on
the ring when the ring recovers from fault. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.113.4.1 |
hwRrppRingFailTrap message is generated by master-node on
the ring when the ring fails. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.113.4.2 |
hwRrppMultiMasterTrap message is generated by master-node when
it detects there are more than one master-node
on the ring. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.113.4.3 |
hwRrppTrackInterfaceDownTrap message is generated by RRPP node when
the track interface tracked BFD down. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.113.4.4 |
hwRrppTrackInterfaceUpTrap message is generated by RRPP node when
the track interface tracked BFD up. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.113.4.5 |
hwRrppMibGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.113.5 |
hwRrppConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.113.6 |
hwRrppCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.113.6.1 |