HUAWEI-RPR-MIB
AI MIB Summary
The HUAWEI-RPR-MIB monitors Ring Protection Switching (RPR) network stability and topology integrity on Huawei devices by exposing specific defect and event traps, including topology changes, instability, duplicate MAC addresses, and physical or logical interface events.
The HUAWEI-RPR-TRAP-MIB contains objects to Monitor the RPR TRAPs.
*********************************
RPR TRAP
**********************************
This RPR TRAP consists of the following TRAPs: 1 : hwRPRexcessReservedRateDefect 2 : hwRPRprotMisconfigDefect 3 : hwRPRtopoChange 4 : hwRPRtopoInvalidDefect 5 : hwRPRduplicateMacAddressDefect 6 : hwRPRtopoInstabilityDefect 7 : hwRPRtopoStabilityRestore 8 : hwRPRPhyIfEventTrap 9 : hwRPRLogicIfEventTrap
Main OID:
hwRPR.1.3.6.1.4.1.2011.5.25.36
34
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
hwRPRThe HUAWEI-RPR-TRAP-MIB contains objects to
Monitor the RPR TRAPs.
*********************************
RPR TRAP
**********************************
This RPR TRAP consists of the following TRAPs:
1 : hwRPRexcessReservedRateDefect
2 : hwRPRprotMisconfigDefect
3 : hwRPRtopoChange
4 : hwRPRtopoInvalidDefect
5 : hwRPRduplicateMacAddressDefect
6 : hwRPRtopoInstabilityDefect
7 : hwRPRtopoStabilityRestore
8 : hwRPRPhyIfEventTrap
9 : hwRPRLogicIfEventTrap MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.36 |
SNMPv2-CONFThe HUAWEI-RPR-TRAP-MIB contains objects to
Monitor the RPR TRAPs.
*********************************
RPR TRAP
**********************************
This RPR TRAP consists of the following TRAPs:
1 : hwRPRexcessReservedRateDefect
2 : hwRPRprotMisconfigDefect
3 : hwRPRtopoChange
4 : hwRPRtopoInvalidDefect
5 : hwRPRduplicateMacAddressDefect
6 : hwRPRtopoInstabilityDefect
7 : hwRPRtopoStabilityRestore
8 : hwRPRPhyIfEventTrap
9 : hwRPRLogicIfEventTrap Unknown .1.3.6.1.4.1.2011.5.25.36 |
hwRPRObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.36.1 |
hwRPRIfEventTableA table of interface event information. SEQUENCE OF HwRPRIfEventEntry .1.3.6.1.4.1.2011.5.25.36.1.1 |
hwRPRIfEventEntryInterface event information Entry. HwRPRIfEventEntry .1.3.6.1.4.1.2011.5.25.36.1.1.1 |
hwRPRLogicIfIndexThe ifIndex of this RPR logic interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.36.1.1.1.1 |
hwRPRLogicIfSpanIdThe SpanId of this RPR logic interface.ro RprSpan (IEEE-802DOT17-RPR-MIB) .1.3.6.1.4.1.2011.5.25.36.1.1.1.2 |
hwRPRLogicIfEventType of logic interface event.
SD indicates that SDH Signal of the RPR logic interface degrades;
SF indicates that SDH Signal of the RPR logic interface fails;
MATEERR indicates that mate cable error caused by mate cable of
the RPR physical interface is linked incorrect;ro Enumeration .1.3.6.1.4.1.2011.5.25.36.1.1.1.3 |
hwRPRPhyIfEventType of physical interface event.
SDHFramerSDst indicates that SDH Signal of the RPR physical interface degrades;
SDHFramerSFst indicates that SDH Signal of the RPR physical interface fails;
SDHFramerLOSst indicates that SDH Signal of the RPR physical interface loses;
SDHFramerLOFst indicates that SDH framer of the RPR physical interface loses;
SDHFramerRDIst indicates that remote Defect Indication ;
SDHFramerAISst indicates that alarm Indication Signal;
SDHFramerREIst indicates that remote ErrorIndication;
Miscabling indicates that cable of the RPR physical interface is linked incorrect;
Keepalive indicates that an exchange of messages allowing verification
that communication between stations is not active;
MateState indicates that mate cable of the RPR physical interface is linked incorrect.ro Enumeration .1.3.6.1.4.1.2011.5.25.36.1.1.1.4 |
hwRPRIfConfigTableA table of RPR logic interface configuration information. SEQUENCE OF HwRPRIfConfigEntry .1.3.6.1.4.1.2011.5.25.36.1.2 |
hwRPRIfConfigEntryRPR interface Configuration entry. HwRPRIfConfigEntry .1.3.6.1.4.1.2011.5.25.36.1.2.1 |
hwRPRIfConfigIfIndexThe ifIndex of this RPR logic interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.36.1.2.1.1 |
hwRPRLogicIfTotalBandWidthThe total bandwidth of this RPR logic interface.rw Enumeration .1.3.6.1.4.1.2011.5.25.36.1.2.1.2 |
hwRPRTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.36.2 |
hwRPRexcessReservedRateDefectThis defect indicates that the amount of reserved
bandwidth on a ringlet exceeds the available LINK_RATE.
When an excess reserved rate defect is present,
a notification may be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.1 |
hwRPRprotMisconfigDefectA critical severity defect that indicates the presence
of mismatched-protection-configuration stations, based
on the value returned by MismatchedProtection().
When a protection configuration defect is present
on the station, a notification may be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.2 |
hwRPRtopoChangeWhen an topology change is present,
a notification may be generated.. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.3 |
hwRPRtopoInvalidDefectA critical severity defect indicating that an
invalid entry has been found within the scope
of the topology,the stations on the ring excess
the MAX_STATIONS or the local station has one
or more duplicate secondary MAC addresses. When
a topology entry invalid defect ,exceeing MaxStations
or duplicate secondary MAC addresses is present,
a notification may be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.4 |
hwRPRduplicateMacAddressDefectA critical severity defect indicating that a
duplicateMacAddress has been found on the ring.
When a duplicateMacAddress defect is present,
a notification may be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.5 |
hwRPRtopoInstabilityDefectThe critical severity Instable topology defect.
When an Instable topology defect is present,
a notification may be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.6 |
hwRPRtopoStabilityRestoreThe critical severity Instable topology restore.
When an stable topology is present,
a notification may be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.7 |
hwRPRPhyIfEventTrapThe critical severity physical interface defect.
When an physical interface defect is present,
a notification may be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.8 |
hwRPRLogicIfEventTrapThe critical severity Logic interface defect.
When an logic interface defect that caused
by physical interface event is present,
a notification may be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.9 |
hwRPRNodeConErrOn RPR ring, to detect the connection, a kind of packet
is send between neighbor RPR nodes, This kind of packet
is SC(Single-Choke) packet, If a node cannot receive SC
packet from neighbor node in KEEPALIVE time, then there
is failure between the two nodes. When happened, auto protection
is executed by software.! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.10 |
hwRPRNodeConErrResumeOn RPR ring, to detect the connection, a kind of packet
is send between neighbor RPR nodes, This kind of packet
is SC(Single-Choke) packet, If a node cannot receive SC
packet from neighbor node in KEEPALIVE time, then there
is failure between the two nodes. When failure is resumed
, this notification is sent.! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.11 |
hwRPRNodeMisCablingOptical fiber is connected in error. i.e the east direction
of one node is connected with east direction of another node,
or the west direction of one node is connected with west direction
of another node! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.12 |
hwRPRNodeMisCablingResumewhen phenomena that Optical fiber is connected in error disappears,
this notification is sent! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.13 |
hwRPRMateErrIn double RPR operating mode, east and west directions
of one rpr node lay on two RPR cards, These two cards are
internally conntected by Gigaibit-ethernet, which is called
MATE interface. The RPR nodes cannot work normaly under
condition of MATE error.! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.14 |
hwRPRMateErrResumeIn double RPR operating mode, east and west directions
of one rpr node lay on two RPR cards, These two cards are
internally conntected by Gigaibit-ethernet, which is called
MATE interface. The RPR nodes cannot work normaly under
condition of MATE error.when MATE error is resumed ,this
notification is sent! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.15 |
hwRPRLOSOn RPR physical layer, link connection is detected
through physical singal. When can't receive physical
singal, then local node from neighbor node, LOS(lost of signal)
alarm is report, auto protection is executed by software.! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.16 |
hwRPRLOSResumeOn RPR physical layer, link connection is detected
through physical singal. When can't receive physical
singal, then local node from neighbor node, LOS(lost of signal)
alarm is report, auto protection is executed by software.when LOS
is resumed,this notification is sent NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.36.2.17 |
hwRPRTrapConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.36.3 |
hwRPRTrapCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.36.3.1 |
hwRPRTrapGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.36.3.2 |