HUAWEI-QINQ-MIB
AI MIB Summary
The HUAWEI-QINQ-MIB module enables the monitoring and configuration of QinQ (802.1Q-in-802.1Q) VLAN stacking parameters, including outer and inner VLAN IDs, on Huawei network devices. This MIB facilitates the management of service provider edge interfaces by exposing metrics for VLAN translation rules and port-based QinQ session states.
The QinQ MIB module is defined to manage the configuration under system or interface view.
Main OID:
hwQinQ.1.3.6.1.4.1.2011.5.25.116
188
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
188 total| Object Name |
|---|
hwQinQThe QinQ MIB module is defined to manage the configuration under system or interface view. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.116 |
hwQinQSystemBase OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.116.1 |
hwQinQSystemWellKnowMacThe destination MAC address replacing the original destination macAddress is a well-known
multicast address. This well-known multicast address shields BPDUs inner details to allow
these BPDUs to be transmitted with a tag through the carrier's network.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.1.1 |
hwQinQSystemBridgeRoleIt indicates the Bridge 's location, having two possible values :Customers' Bridge
and Providers' Bridge.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.1.2 |
hwBpduSystemDropPacketStaView statistics about the discarded BPDUs.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.1.3 |
hwQinQSystemEtherTypeThe value of tag type is encapsulated in the head of the ethernet frame
to distinguish the encapsulated mode between the 802.1Q and QinQ. Default is '8100'h.rw Unsigned32 ('600'h..'ffff'h) .1.3.6.1.4.1.2011.5.25.116.1.4 |
hwQinQMngObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.116.2 |
hwQinQBpduTunnelTableQinQ-port configuration table. SEQUENCE OF HwQinQBpduTunnelEntry .1.3.6.1.4.1.2011.5.25.116.2.1 |
hwQinQBpduTunnelEntryThe entry of an interface enabled the QinQ function. HwQinQBpduTunnelEntry .1.3.6.1.4.1.2011.5.25.116.2.1.1 |
hwQinQBpduTunnelIndexIndex number of the interface. Integer32 .1.3.6.1.4.1.2011.5.25.116.2.1.1.1 |
hwQinQEtherEncpsTypeThe value of tag type is encapsulated in the head of the Ethernet frame
To distinguish the encapsulated mode between the 802.1Q and QinQ.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.116.2.1.1.2 |
hwQinQBpduTunnelEnableOneQBpduTunnelThe value indicates whether the 1Q-bpdutunnel is opened,
If hwQinQBpduTunnelEnableTwoQBpduTunnel is enabling, then this value should be disable.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.1.1.3 |
hwQinQBpduTunnelEnableBpduTagWhether to enable the setting of BPDU Tunnel tag. Default is disabled.ro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.1.1.4 |
hwQinQBpduTunnelEnableTwoQBpduTunnelThe value indicates whether the 2Q-bpdutunnel is opened,
If hwQinQBpduTunnelEnableOneQBpduTunnel is enabling, then this value should be disable.
Default is disabled.ro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.1.1.5 |
hwQinQBpduTunnelCustomerBpduTagThe tag is inserted into the head of the BPDU ,to support
that can be transmitted through the services' network.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.1.1.6 |
hwQinQBpduTunnelCustomerBpduTagListLowThe list describes accessible bode from different vlan (0 to 2047).rw OCTET STRING .1.3.6.1.4.1.2011.5.25.116.2.1.1.7 |
hwQinQBpduTunnelCustomerBpduTagListHighThe list describes accessible bpdu from different vlan (2048 to 4094).rw OCTET STRING .1.3.6.1.4.1.2011.5.25.116.2.1.1.8 |
hwQinQRemarkOuterTpidThe value indicates the TPID of outer tag of packets that have two tag and output from the output interface of vlan-switch,
If hwQinQEtherEncpsType is enabling, then this value should be 0xffff.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.1.1.9 |
hwQinQBpduTunnelEnableBpduFilterThe value indicates whether the BPDU filter function is enabled.
If hwQinQBpduTunnelEnableBpduFilter is enabled, then this value should be enable.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.1.1.10 |
hwQinQSubIfVlanStackingTableUsed to configure packets'vlan stacking in sub interface, receive one-tag
packets and transmit two-tag packets, where the outer-tag inserted is in
hwQinQSubIfVlanStackingTable. SEQUENCE OF HwQinQSubIfVlanStackingEntry .1.3.6.1.4.1.2011.5.25.116.2.2 |
hwQinQSubIfVlanStackingEntryThe entry of an interface enabled the QinQ-stacking function. HwQinQSubIfVlanStackingEntry .1.3.6.1.4.1.2011.5.25.116.2.2.1 |
hwQinQSubIfStackingIfIndexIndex number of the QinQ-stacking interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.2.1.1 |
hwQinQSubIfStackingCEVlanStartWhen configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the
start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.2.1.2 |
hwQinQSubIfStackingCEVlanEndWhen configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the
start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.2.1.3 |
hwQinQSubIfStackGroupIdGroup-management id.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.2.1.4 |
hwQinQSubIfStackingRowStatusUsed for controlling the creation and deletion of this
row. All writable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwQinQSubIfVlanStackingTable pointing to the row, the agent must also
destroy the corresponding entries in hwQinQSubIfVlanStackingTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.2.1.5 |
hwQinQSubIfStackingPEVlanPE vlan id.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.2.1.6 |
hwQinQSubIfStackingStatTableWhen a sub interface configured QinQ-stacking function, hwQinQSubIfStackingStatTable is used to
statistic total number of the out packets and in packets. SEQUENCE OF HwQinQSubIfStackingStatEntry .1.3.6.1.4.1.2011.5.25.116.2.3 |
hwQinQSubIfStackingStatEntryThe entry of an interface enabled the QinQ-stacking function. HwQinQSubIfStackingStatEntry .1.3.6.1.4.1.2011.5.25.116.2.3.1 |
hwQinQSubIfStackingStatIfIndexIndex number of the QinQ-stacking interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.3.1.1 |
hwQinQSubIfStackingStatCEVlanInner vlan in packets which input the QinQ sub interface,
used to indicate the packets as an index. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.3.1.2 |
hwQinQSubIfStackStatGroupIdThe group-management id. The statistic number of packets can not get if
the statistic funtion is not enabled.ro Integer32 .1.3.6.1.4.1.2011.5.25.116.2.3.1.3 |
hwQinQSubIfStackingStatOutPacketsTotal number of out packets of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.3.1.4 |
hwQinQSubIfStackingStatOutBytesTotal number of out bytes of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.3.1.5 |
hwQinQSubIfStackingStatInPacketsTotal number of in packets of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.3.1.6 |
hwQinQSubIfStackingStatInBytesTotal number of in bytes of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.3.1.7 |
hwQinQSubIfStackStatOutBdPacketsTotal number of broadcast packets transmitted out of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.3.1.8 |
hwQinQSubIfStackStatInBdPacketsTotal number of broadcast packets received from the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.3.1.9 |
hwQinQSubIfStackStatOutMuPacketsTotal number of multicast packets transmitted out of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.3.1.10 |
hwQinQSubIfStackStatInMuPacketsTotal number of multicast packets received from the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.3.1.11 |
hwQinQSubIfStackStatOutUniPacketsTotal number of unicast packets transmitted out of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.3.1.12 |
hwQinQSubIfStackStatInUniPacketsTotal number of unicast packets received from the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.3.1.13 |
hwQinQSubIfTermTableThe table is used to configure QinQ-termination function in sub interface, then packets
transmitted from this sub interface input with two tags will be terminated. SEQUENCE OF HwQinQSubIfTermEntry .1.3.6.1.4.1.2011.5.25.116.2.4 |
hwQinQSubIfTermEntryThe entry of an interface enabled the QinQ-termination function. HwQinQSubIfTermEntry .1.3.6.1.4.1.2011.5.25.116.2.4.1 |
hwQinQSubIfTermIfIndexIndex number of the QinQ-termination interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.4.1.1 |
hwQinQSubIfTermPEVlanOuter vlan id of the packets which have two tags before being terminated. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.4.1.2 |
hwQinQSubIfTermCEVlanStartWhen configure ce vlan as a range, hwQinQSubIfTermCEVlanStart
is the start vlan id and hwQinQSubIfTermCEVlanEnd is the end vlan id. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.4.1.3 |
hwQinQSubIfTermCEVlanEndWhen configure ce vlan as a range, hwQinQSubIfTermCEVlanStart is
the start vlan id and hwQinQSubIfTermCEVlanEnd is the end vlan id.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.4.1.4 |
hwQinQSubIfTermGroupIdGroup-management id.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.4.1.5 |
hwQinQSubIfTermRowStatusUsed for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwQinQSubIfTermTable pointing to the row, the agent must also
destroy the corresponding entries in hwQinQSubIfTermTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.4.1.6 |
hwQinQSubIfTermStatTableWhen a sub interface configured QinQ-termination function, hwQinQSubIfTermStatTable used to
statistic total number of the out packets and in packets. SEQUENCE OF HwQinQSubIfTermStatEntry .1.3.6.1.4.1.2011.5.25.116.2.5 |
hwQinQSubIfTermStatEntryThe entry of an interface enabled the QinQ-termination function. HwQinQSubIfTermStatEntry .1.3.6.1.4.1.2011.5.25.116.2.5.1 |
hwQinQSubIfTermStatIfIndexIndex number of the QinQ-termination interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.5.1.1 |
hwQinQSubIfTermStatPEVlanOuter vlan in packets which input the QinQ sub interface,
used to indicate the packets as an index. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.5.1.2 |
hwQinQSubIfTermStatCEVlanInner vlan in packets which input the QinQ sub interface,
used to indicate the packets as an index. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.5.1.3 |
hwQinQSubIfTermStatGroupIdThe group-management id. The statistic number of packets can not get if
the statistic funtion is not enabled.ro Integer32 .1.3.6.1.4.1.2011.5.25.116.2.5.1.4 |
hwQinQSubIfTermStatOutPacketsTotal number of out packets of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.5.1.5 |
hwQinQSubIfTermStatOutBytesTotal number of out bytes of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.5.1.6 |
hwQinQSubIfTermStatInPacketsTotal number of in packets of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.5.1.7 |
hwQinQSubIfTermStatInBytesTotal number of in bytes of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.5.1.8 |
hwQinQSubIfTermStatOutBdPacketsTotal number of broadcast packets transmitted out of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.5.1.9 |
hwQinQSubIfTermStatInBdPacketsTotal number of broadcast packets received from the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.5.1.10 |
hwQinQSubIfTermStatOutMuPacketsTotal number of multicast packets transmitted out of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.5.1.11 |
hwQinQSubIfTermStatInMuPacketsTotal number of multicast packets received from the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.5.1.12 |
hwQinQSubIfTermStatOutUniPacketsTotal number of unicast packets transmitted out of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.5.1.13 |
hwQinQSubIfTermStatInUniPacketsTotal number of unicast packets received from the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.5.1.14 |
hwQinQStaticARPCfgTableThe table is used to configure QinQ static ARP. SEQUENCE OF HwQinQStaticARPCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.6 |
hwQinQStaticARPCfgEntryThe entry of an interface enabled the QinQ function. HwQinQStaticARPCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.6.1 |
hwQinQStaticARPCfgIfIndexThe interface's Index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.6.1.1 |
hwQinQStaticARPCfgIpThe IP address. IpAddress .1.3.6.1.4.1.2011.5.25.116.2.6.1.2 |
hwQinQStaticARPCfgMacThe MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.6.1.3 |
hwQinQStaticARPCfgVlanThe first vlan id.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.6.1.4 |
hwQinQStaticARPCfgCEVlanThe second vlan id.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.6.1.5 |
hwQinQStaticARPCfgRowStatusUsed for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwQinQStaticARPCfgTable pointing to the row ,the agent must also
destroy the corresponding entries in hwQinQStaticARPCfgTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.6.1.6 |
hwQinQStaticMACCfgTableThe table is used to configure static MAC. SEQUENCE OF HwQinQStaticMACCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.7 |
hwQinQStaticMACCfgEntryThe entry of an interface enabled the QinQ function. HwQinQStaticMACCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.7.1 |
hwQinQStaticMACCfgMacThe MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.7.1.1 |
hwQinQStaticMACCfgVlanVlan id that the MAC address belongs to. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.7.1.2 |
hwQinQStaticMACCfgVsiNameName of VSI that the MAC address belongs to. OCTET STRING .1.3.6.1.4.1.2011.5.25.116.2.7.1.3 |
hwQinQStaticMACCfgPEVlanPE vlan id for a Network Management Application attempts to configure hwQinQStaticMACCfgTable.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.7.1.4 |
hwQinQStaticMACCfgCEVlanCE vlan id.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.7.1.5 |
hwQinQStaticMACCfgTypeThe type of the MAC.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.7.1.6 |
hwQinQStaticMACCfgIfIndexIndex number of the interface.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.7.1.7 |
hwQinQStaticMACCfgFlagThe config type.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.7.1.8 |
hwQinQStaticMACCfgRowStatusUsed for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwQinQStaticMACCfgTable pointing to the row ,the agent must also
destroy the corresponding entries in hwQinQStaticMACCfgTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.7.1.9 |
hwQinQSubIfDot1qTermTableUsed to configure Dot1q-termination function in sub interface ,then packets
transmitted from this sub interface input with one tag will be terminated. SEQUENCE OF HwQinQSubIfDot1qTermEntry .1.3.6.1.4.1.2011.5.25.116.2.8 |
hwQinQSubIfDot1qTermEntryThe entry of an interface enabled the Dot1q-termination function. HwQinQSubIfDot1qTermEntry .1.3.6.1.4.1.2011.5.25.116.2.8.1 |
hwQinQSubIfDot1qTermIfIndexIndex number of the Dot1q-termination interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.8.1.1 |
hwQinQSubIfDot1qTermVidStartWhen configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart
is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.8.1.2 |
hwQinQSubIfDot1qTermVidEndWhen configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is
the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.8.1.3 |
hwQinQSubIfDot1qTermGroupIdGroup-management id.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.8.1.4 |
hwQinQSubIfDot1qTermRowStatusUsed for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwQinQSubIfDot1qTermTable pointing to the row ,the agent must also
destroy the corresponding entries in hwQinQSubIfDot1qTermTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.8.1.5 |
hwQinQSubIfDot1qTermStatTableWhen a sub interface configured Dot1q-termination, hwQinQSubIfDot1qTermStatTable used to
statistic total number of the out packets and in packets. SEQUENCE OF HwQinQSubIfDot1qTermStatEntry .1.3.6.1.4.1.2011.5.25.116.2.9 |
hwQinQSubIfDot1qTermStatEntryThe entry of an interface configured Dot1q-termination function. HwQinQSubIfDot1qTermStatEntry .1.3.6.1.4.1.2011.5.25.116.2.9.1 |
hwQinQSubIfDot1qTermStatIfIndexIndex number of the Dot1q-termination interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.9.1.1 |
hwQinQSubIfDot1qTermStatCEVlanInner vlan in packets which input the Dot1q-termination sub interface,
used to indicate the packets as an index. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.9.1.2 |
hwQinQSubIfDot1qTermStatGroupIdThe group-management id. The statistic number of packets can not get if
the statistic funtion is not enabled.ro Integer32 .1.3.6.1.4.1.2011.5.25.116.2.9.1.3 |
hwQinQSubIfDot1qTermStatOutPacketsTotal number of out packets of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.9.1.4 |
hwQinQSubIfDot1qTermStatOutBytesTotal number of out bytes of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.9.1.5 |
hwQinQSubIfDot1qTermStatInPacketsTotal number of in packets of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.9.1.6 |
hwQinQSubIfDot1qTermStatInBytesTotal number of in bytes of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.9.1.7 |
hwQinQSubIfDot1qTermStatOutBdPacketsTotal number of broadcast packets transmitted out of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.9.1.8 |
hwQinQSubIfDot1qTermStatInBdPacketsTotal number of broadcast packets received from the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.9.1.9 |
hwQinQSubIfDot1qTermStatOutMuPacketsTotal number of multicast packets transmitted out of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.9.1.10 |
hwQinQSubIfDot1qTermStatInMuPacketsTotal number of multicast packets received from the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.9.1.11 |
hwQinQSubIfDot1qTermStatOutUniPacketsTotal number of unicast packets transmitted out of the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.9.1.12 |
hwQinQSubIfDot1qTermStatInUniPacketsTotal number of unicast packets received from the sub interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.116.2.9.1.13 |
hwQinQModeCfgTableThe table contains mode type and ethernet encapsulation type. SEQUENCE OF HwQinQModeCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.10 |
hwQinQModeCfgEntryThe mode type and ethernet encapsulation type of an interface entry. HwQinQModeCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.10.1 |
hwQinQModeCfgIfIndexIndex number of the interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.10.1.1 |
hwQinQModeCfgModeMode type of the interface.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.10.1.2 |
hwQinQEtherTypeThe value of tag type is encapsulated in the head of the ethernet frame
to distinguish the encapsulated mode between the 802.1Q and QinQ.rw Unsigned32 ('600'h..'ffff'h) .1.3.6.1.4.1.2011.5.25.116.2.10.1.3 |
hwQinQCeEtherTypeThe value of tag type is encapsulated in the head of the ethernet frame
to distinguish the encapsulated mode between the 802.1Q and QinQ.rw Unsigned32 ('600'h..'ffff'h) .1.3.6.1.4.1.2011.5.25.116.2.10.1.4 |
hwQinQCtrlVlanCfgTableThe control-vlan id and control-vlan's attributes can be configured in sub interface.
You must designate control-vlan as QinQ or Dot1q before configuring QinQ-termination
function or Dot1q-termination function. SEQUENCE OF HwQinQCtrlVlanCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.11 |
hwQinQCtrlVlanCfgEntryThe Control-vlan configuration entry. HwQinQCtrlVlanCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.11.1 |
hwQinQCtrlVlanCfgIfIndexIndex number of the sub interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.11.1.1 |
hwQinQCtrlVlanControl-Vlan id.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.11.1.2 |
hwQinQSubIfTypeThe type of sub interface.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.11.1.3 |
hwQinQCtrlVlanFlagThe service type of the sub interface, by setting hwQinQCtrlVlanFlag to the value (rtprotocolenable),
the route-protocol attribute enabled; and by setting hwQinQCtrlVlanFlag to the value (localswitch),
the localswitch attribute enabled, which means two tags of packets will be pruned.
So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQCtrlVlanFlag as localswitch.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.11.1.4 |
hwQinQCtrlVlanRowStatusThis table can be created and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.11.1.5 |
hwQinQFlexibleFlagThe service type of the sub interface, by setting hwQinQFlexibleFlag to the value (flexibleenable),
the flexible attribute enabled;
So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQFlexibleFlag as flexibleenable.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.11.1.6 |
hwQinQGroupCfgTableThe group-management id and group's attributes can be configured in sub interface. SEQUENCE OF HwQinQGroupCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.12 |
hwQinQGroupCfgEntryGroup configuration entry. HwQinQGroupCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.12.1 |
hwQinQGroupCfgIfIndexIndex number of the interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.12.1.1 |
hwQinQGroupIdGroup-management id. Integer32 .1.3.6.1.4.1.2011.5.25.116.2.12.1.2 |
hwQinQGroupTypeThe type of the group.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.12.1.3 |
hwQinQGroupStatWhether the statistic function is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.12.1.4 |
hwQinQGroupRowStatusThis table can be created and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.12.1.5 |
hwQinQAsymmetryCfgTableThe table to configure asymmetry attribution of the interface. SEQUENCE OF HwQinQAsymmetryCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.13 |
hwQinQAsymmetryCfgEntryThe entry of the asymmetry configure table. HwQinQAsymmetryCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.13.1 |
hwQinQAsymmetryCfgIfIndexIndex number of the QinQ-termination interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.13.1.1 |
hwQinQSubIfAsymmetryThe asymmetry attribution of the QinQ-termination interface.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.13.1.2 |
hwQinQAsymmetryUserModeThe user mode attribute of the QinQ-termination sub interface.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.13.1.3 |
hwQinQRemarkCfgTableInterface remark config. SEQUENCE OF HwQinQRemarkCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.14 |
hwQinQRemarkCfgEntryThe entry of the interface remark configuration table. HwQinQRemarkCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.14.1 |
hwQinQRemarkCfgIfIndexIndex number of the sub interface,
which should configure QinQ-termination function first. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.14.1.1 |
hwQinQPriorityRemarkThe service policy map to set the 802.1P bits. By default(pevid),
copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag,
by setting object to (cevid), copy the P bits that were in inner CE VALN
tag to the trunk VLAN tag.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.14.1.2 |
hwBpduTunnelIngressTableThe table of bpdu tunnel ingress. SEQUENCE OF HwBpduTunnelIngressEntry .1.3.6.1.4.1.2011.5.25.116.2.15 |
hwBpduTunnelIngressEntryThe entry of of bpdu tunnel ingress. HwBpduTunnelIngressEntry .1.3.6.1.4.1.2011.5.25.116.2.15.1 |
hwBpduTunnelIngressPortIndexPort index in interface. Integer32 .1.3.6.1.4.1.2011.5.25.116.2.15.1.1 |
hwBpduTunnelBpduIngressMacIndexbpdu mac address list
BPDU Dmac protocol
01-80-C2-00-00-00 stp01
01-80-C2-00-00-01 pauseFrame
01-80-C2-00-00-02 reserved02
01-80-C2-00-00-03 reserved03
01-80-C2-00-00-04 reserved04
01-80-C2-00-00-05 reserved05
01-80-C2-00-00-06 reserved06
01-80-C2-00-00-07 reserved07
01-80-C2-00-00-08 stp02
01-80-C2-00-00-09 reserved08
01-80-C2-00-00-0a hgmp
01-80-C2-00-00-0b reserved09
01-80-C2-00-00-0c reserved10
01-80-C2-00-00-0d reserved11
01-80-C2-00-00-0e reserved12
01-80-C2-00-00-0f reserved13
01-80-C2-00-00-10 reserved14
01-80-C2-00-00-11 reserved15
01-80-C2-00-00-12 reserved16
01-80-C2-00-00-13 reserved17
01-80-C2-00-00-14 isisLevel01
01-80-C2-00-00-15 isisLevel02
01-80-C2-00-00-16 reserved18
01-80-C2-00-00-17 reserved19
01-80-C2-00-00-18 reserved20
01-80-C2-00-00-19 reserved21
01-80-C2-00-00-1a reserved22
01-80-C2-00-00-1b reserved23
01-80-C2-00-00-1c reserved24
01-80-C2-00-00-1d reserved25
01-80-C2-00-00-1e reserved26
01-80-C2-00-00-1f reserved27
01-80-C2-00-00-20 gmrp
01-80-C2-00-00-21 gvrp
01-80-C2-00-00-22 reserved28
01-80-C2-00-00-23 reserved29
01-80-C2-00-00-24 reserved30
01-80-C2-00-00-25 reserved31
01-80-C2-00-00-26 reserved32
01-80-C2-00-00-27 reserved33
01-80-C2-00-00-28 reserved34
01-80-C2-00-00-29 reserved35
01-80-C2-00-00-2a reserved36
01-80-C2-00-00-2b reserved37
01-80-C2-00-00-2c reserved38
01-80-C2-00-00-2d reserved39
01-80-C2-00-00-2e reserved40
01-80-C2-00-00-2f reserved41 BpduIndex .1.3.6.1.4.1.2011.5.25.116.2.15.1.2 |
hwBpduTunnelIngressAddressGroup mac address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.15.1.3 |
hwBpduTunnelIngressRowStatusBpdu tunnek ingress row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.15.1.4 |
hwBpduTunnelEgressTableThe table of bpdu tunnel egress. SEQUENCE OF HwBpduTunnelEgressEntry .1.3.6.1.4.1.2011.5.25.116.2.16 |
hwBpduTunnelEgressEntryThe entry of bpdu tunnel egress. HwBpduTunnelEgressEntry .1.3.6.1.4.1.2011.5.25.116.2.16.1 |
hwBpduTunnelEgressPortIndexPort index in interface. Integer32 .1.3.6.1.4.1.2011.5.25.116.2.16.1.1 |
hwBpduTunnelBpduEgressMacIndexBpdu MAC address list
BPDU DMAC protocol
01-80-C2-00-00-00 stp01
01-80-C2-00-00-01 pauseFrame
01-80-C2-00-00-02 reserved02
01-80-C2-00-00-03 reserved03
01-80-C2-00-00-04 reserved04
01-80-C2-00-00-05 reserved05
01-80-C2-00-00-06 reserved06
01-80-C2-00-00-07 reserved07
01-80-C2-00-00-08 stp02
01-80-C2-00-00-09 reserved08
01-80-C2-00-00-0a hgmp
01-80-C2-00-00-0b reserved09
01-80-C2-00-00-0c reserved10
01-80-C2-00-00-0d reserved11
01-80-C2-00-00-0e reserved12
01-80-C2-00-00-0f reserved13
01-80-C2-00-00-10 reserved14
01-80-C2-00-00-11 reserved15
01-80-C2-00-00-12 reserved16
01-80-C2-00-00-13 reserved17
01-80-C2-00-00-14 isisLevel01
01-80-C2-00-00-15 isisLevel02
01-80-C2-00-00-16 reserved18
01-80-C2-00-00-17 reserved19
01-80-C2-00-00-18 reserved20
01-80-C2-00-00-19 reserved21
01-80-C2-00-00-1a reserved22
01-80-C2-00-00-1b reserved23
01-80-C2-00-00-1c reserved24
01-80-C2-00-00-1d reserved25
01-80-C2-00-00-1e reserved26
01-80-C2-00-00-1f reserved27
01-80-C2-00-00-20 gmrp
01-80-C2-00-00-21 gvrp
01-80-C2-00-00-22 reserved28
01-80-C2-00-00-23 reserved29
01-80-C2-00-00-24 reserved30
01-80-C2-00-00-25 reserved31
01-80-C2-00-00-26 reserved32
01-80-C2-00-00-27 reserved33
01-80-C2-00-00-28 reserved34
01-80-C2-00-00-29 reserved35
01-80-C2-00-00-2a reserved36
01-80-C2-00-00-2b reserved37
01-80-C2-00-00-2c reserved38
01-80-C2-00-00-2d reserved39
01-80-C2-00-00-2e reserved40
01-80-C2-00-00-2f reserved41. BpduIndex .1.3.6.1.4.1.2011.5.25.116.2.16.1.2 |
hwBpduTunnelEgressAddressGroup mac address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.16.1.3 |
hwBpduTunnelEgressRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.16.1.4 |
hwBpduTunnelVlanTableThe table of port bpdu tunnel. SEQUENCE OF HwBpduTunnelVlanEntry .1.3.6.1.4.1.2011.5.25.116.2.17 |
hwBpduTunnelVlanEntryThe entry of port bpdu tunnel vlan. HwBpduTunnelVlanEntry .1.3.6.1.4.1.2011.5.25.116.2.17.1 |
hwBpduTunnelPortIndexPort index in interface. Integer32 .1.3.6.1.4.1.2011.5.25.116.2.17.1.1 |
hwBpduTunnelEnableBpdu tunnel enable.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.17.1.2 |
hwBpduTunnelVlanListLowVlan bpdu tunnel in port.rw VlanList (HUAWEI-L2IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.17.1.3 |
hwBpduTunnelVlanListHighVlan bpdu tunnel in port.rw VlanList (HUAWEI-L2IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.17.1.4 |
hwBpduTunnelTableThe table of bpdu tunnel. SEQUENCE OF HwBpduTunnelEntry .1.3.6.1.4.1.2011.5.25.116.2.18 |
hwBpduTunnelEntryThe entry of of bpdu tunnel. HwBpduTunnelEntry .1.3.6.1.4.1.2011.5.25.116.2.18.1 |
hwBpduTunnelBpduIndexBpdu mac address list
BPDU Dmac protocol
01-80-C2-00-00-00 stp01 (1)
01-80-C2-00-00-01 pauseFrame (2)
01-80-C2-00-00-02 reserved02 (3)
01-80-C2-00-00-03 reserved03 (4)
01-80-C2-00-00-04 reserved04 (5)
01-80-C2-00-00-05 reserved05 (6)
01-80-C2-00-00-06 reserved06 (7)
01-80-C2-00-00-07 reserved07 (8)
01-80-C2-00-00-08 stp02 (9)
01-80-C2-00-00-09 reserved08 (10)
01-80-C2-00-00-0a hgmp (11)
01-80-C2-00-00-0b reserved09 (12)
01-80-C2-00-00-0c reserved10 (13)
01-80-C2-00-00-0d reserved11 (14)
01-80-C2-00-00-0e reserved12 (15)
01-80-C2-00-00-0f reserved13 (16)
01-80-C2-00-00-10 reserved14 (17)
01-80-C2-00-00-11 reserved15 (18)
01-80-C2-00-00-12 reserved16 (19)
01-80-C2-00-00-13 reserved17 (20)
01-80-C2-00-00-14 isisLevel01 (21)
01-80-C2-00-00-15 isisLevel02 (22)
01-80-C2-00-00-16 reserved18 (23)
01-80-C2-00-00-17 reserved19 (24)
01-80-C2-00-00-18 reserved20 (25)
01-80-C2-00-00-19 reserved21 (26)
01-80-C2-00-00-1a reserved22 (27)
01-80-C2-00-00-1b reserved23 (28)
01-80-C2-00-00-1c reserved24 (29)
01-80-C2-00-00-1d reserved25 (30)
01-80-C2-00-00-1e reserved26 (31)
01-80-C2-00-00-1f reserved27 (32)
01-80-C2-00-00-20 gmrp (33)
01-80-C2-00-00-21 gvrp (34)
01-80-C2-00-00-22 reserved28 (35)
01-80-C2-00-00-23 reserved29 (36)
01-80-C2-00-00-24 reserved30 (37)
01-80-C2-00-00-25 reserved31 (38)
01-80-C2-00-00-26 reserved32 (39)
01-80-C2-00-00-27 reserved33 (40)
01-80-C2-00-00-28 reserved34 (41)
01-80-C2-00-00-29 reserved35 (42)
01-80-C2-00-00-2a reserved36 (43)
01-80-C2-00-00-2b reserved37 (44)
01-80-C2-00-00-2c reserved38 (45)
01-80-C2-00-00-2d reserved39 (46)
01-80-C2-00-00-2e reserved40 (47)
01-80-C2-00-00-2f reserved41 (48)
01-80-C2-00-00-02 lacp (49)
01-00-0C-CC-CC-CC cdp (50)
01-00-0C-CC-CC-CC pagp (51)
01-00-0C-CC-CC-CC udld (52)
01-00-0C-CC-CC-CC vtp (53) . BpduIndex .1.3.6.1.4.1.2011.5.25.116.2.18.1.1 |
hwBpduTunnelBpduEnableBpdu tunnel enable or disable.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.18.1.2 |
hwBpduTunnelMultiAddressGroup MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.18.1.3 |
hwBpduTunnelRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.18.1.4 |
hwQinQSwapCfgTableThis table describes the vlan swap configurations of interfaces. SEQUENCE OF HwQinQSwapCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.19 |
hwQinQSwapCfgEntryAn entry is created for each active ethernet type interface in the device
and deleted when the interface been not exist. HwQinQSwapCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.19.1 |
hwQinQSwapCfgIfIndexIndex number of the interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.19.1.1 |
hwQinQSwapCfgFlagQinQ swap flag of the interface, which indicates whether to swap the two vlan tags or not when the interface receives a packet with two 802.1q tags.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.19.1.2 |
hwQinQSubIfMapTableThe table is used to configure QinQ-mapping function in sub interface, then packets
transmitted from this sub interface input with one or two tags will be mapped to other tag or tags. SEQUENCE OF HwQinQSubIfMapEntry .1.3.6.1.4.1.2011.5.25.116.2.20 |
hwQinQSubIfMapEntryThe entry of an interface enabled the QinQ-Map function. HwQinQSubIfMapEntry .1.3.6.1.4.1.2011.5.25.116.2.20.1 |
hwQinQSubIfMapIfIndexIndex number of the QinQ-Map interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.20.1.1 |
hwQinQSubIfPEVlanOuter vlan id of the packets which have two tags before being Mapped. Integer32 .1.3.6.1.4.1.2011.5.25.116.2.20.1.2 |
hwQinQSubIfCEVlanStartInner start vlan id of the packets which have two tags before being Mapped. Integer32 .1.3.6.1.4.1.2011.5.25.116.2.20.1.3 |
hwQinQSubIfCEVlanEndInner end vlan id of the packets which have two tags before being Mapped.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.20.1.4 |
hwQinQSubIfPEVlanMapOuter vlan id of the packets which have two tags after being Mapped.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.20.1.5 |
hwQinQSubIfPEEtherTypeEtherType of Pe Mapped.rw Unsigned32 ('600'h..'ffff'h) .1.3.6.1.4.1.2011.5.25.116.2.20.1.6 |
hwQinQSubIfCEVlanMapInner vlan id of the packets which have two tags after being Mapped.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.20.1.7 |
hwQinQSubIfCEEtherTypeEtherType of Ce Mapped.rw Unsigned32 ('600'h..'ffff'h) .1.3.6.1.4.1.2011.5.25.116.2.20.1.8 |
hwQinQSubIfMapGroupIdGroup-management id.rw Integer32 .1.3.6.1.4.1.2011.5.25.116.2.20.1.9 |
hwQinQSubIfMapPe8021pThe service policy map to set the 802.1P bits. By default(pevid),
copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag,
by setting object to (cevid), copy the P bits that were in inner CE VALN
tag to the trunk VLAN tag.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.20.1.10 |
hwQinQSubIfMapCe8021pThe service policy map to set the 802.1P bits. By default(pevid),
copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag,
by setting object to (cevid), copy the P bits that were in inner CE VALN
tag to the trunk VLAN tag.rw Enumeration .1.3.6.1.4.1.2011.5.25.116.2.20.1.11 |
hwQinQSubIfMapCetoPeFlagThe service type of the sub interface, by setting MapCetoPeFlag to the value (CetoPeenable),
the 8021p CetoPeenable attribute enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.20.1.12 |
hwQinQSubIfMapRowStatusUsed for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwQinQSubIfMapTable pointing to the row, the agent must also
destroy the corresponding entries in hwQinQSubIfMapTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.20.1.13 |
hwQinQStackingVlanCfgTableQinQ Stacking Vlan configuration table. SEQUENCE OF HwQinQStackingVlanCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.21 |
hwQinQStackingVlanCfgEntryThis object indicates the configuration table for QinQ Stacking Vlan. HwQinQStackingVlanCfgEntry .1.3.6.1.4.1.2011.5.25.116.2.21.1 |
hwQinQStackingVlanCfgIfIndexThis object indicates the Index number of the vlanif interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.116.2.21.1.1 |
hwQinQStackingVlanCfgVlanIdThis object indicates the outer vlan id for QinQ Stacking Vlan.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.116.2.21.1.2 |
hwQinQStackingVlanCfgRowStatusThis object indicates the RowStatus of hwQinQStackingVlanTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.116.2.21.1.50 |
hwQinQConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.116.3 |
hwQinQGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.116.3.1 |
hwQinQCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.116.3.2 |