HUAWEI-IPDSLAML2PPORTCONFIG-MIB
AI MIB Summary
The HUAWEI-IPDSLAML2PPORTCONFIG-MIB enables granular configuration and monitoring of physical and service virtual ports on Huawei IPDSLAM devices, specifically managing Layer 2 IP DSL Access Multiplexer port parameters. This module facilitates the retrieval and modification of port-specific attributes required for establishing and maintaining broadband subscriber sessions.
The MIB module defines the MIB objects of the two layer IPDSLAM configuration that based on port. The port configuration includes configuring and querying all types of physical and service virtual ports.
Main OID:
hwIpDslamL2pPortConfig.1.3.6.1.4.1.2011.6.109
36
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
36 total| Object Name |
|---|
hwIpDslamL2pPortConfigThe MIB module defines the MIB objects of the two layer IPDSLAM
configuration that based on port.
The port configuration includes configuring and querying all
types of physical and service virtual ports. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.109 |
IF-MIBThe MIB module defines the MIB objects of the two layer IPDSLAM
configuration that based on port.
The port configuration includes configuring and querying all
types of physical and service virtual ports. Unknown .1.3.6.1.4.1.2011.6.109 |
hwIpDslamL2pPortConfigTableUsed for setting and querying the configuration based on port.
The indexes of this table are hwIpDslamL2pPortConfigIfIndex, hwIpDslamL2pPortConfigSecondIndex,
hwIpDslamL2pPortConfigThirdIndex, and hwIpDslamL2pPortConfigObject. SEQUENCE OF HwIpDslamL2pPortConfigEntry .1.3.6.1.4.1.2011.6.109.1 |
hwIpDslamL2pPortConfigEntryUsed for setting and querying the configuration based on port.
The indexes of this entry are hwIpDslamL2pPortConfigIfIndex, hwIpDslamL2pPortConfigSecondIndex,
hwIpDslamL2pPortConfigThirdIndex, and hwIpDslamL2pPortConfigObject. HwIpDslamL2pPortConfigEntry .1.3.6.1.4.1.2011.6.109.1.1 |
hwIpDslamL2pPortConfigIfIndexThe same as the ifIndex in Huawei MIB.
To set or query hwIpDslamL2pPortConfigTable, you need to input the value of
hwIpDslamL2pPortConfigIfIndex on the NMS. Integer32 .1.3.6.1.4.1.2011.6.109.1.1.1 |
hwIpDslamL2pPortConfigSecondIndexAn invalid value needs to be input for this leaf for the ADSL, SHDSL, VDSL2,
and OPFA boards. The invalid value is defined as 65535. For GPON boards,
in the xPON distributed mode, the configuration granularity of L2 enhanced services
based on physical port is GEM port. In this case, this leaf is used to indicate the
GEM port ID and the value range is 128-3999.
In the xPON (EPON and GPON) profile mode, this leaf is used to indicate the ONT ID. Integer32 .1.3.6.1.4.1.2011.6.109.1.1.2 |
hwIpDslamL2pPortConfigThirdIndexIn the xPON profile mode, the configuration granularity of L2 services based on physical
port is GEM index and the value range is 0-1023.
For the ADSL, SHDSL, VDSL2, OPFA, and EPON boards, an invalid value needs to be input for this leaf.
The invalid value is defined as -1.
For GPON boards, this leaf takes effect only in the xPON profile mode.
In this case, this leaf is used to indicate the GEM index of a GPON port.
In other modes, an invalid value needs to be input for this leaf. Integer32 .1.3.6.1.4.1.2011.6.109.1.1.3 |
hwIpDslamL2pPortConfigObjectIndicates the configured object.
Options:
1. pppoeSessionCount(1) -indicates the configured object is pppoeSessionCount
2. pitp(2) -indicates the configured object is pitp
3. dhcpOption82(3) -indicates the configured object is dhcpOption82 Enumeration .1.3.6.1.4.1.2011.6.109.1.1.4 |
hwIpDslamL2pPortConfigTypeIndicates the value type of the configured object.
Options:
1. integer(1) -integer type
2. string(2) -string type
Currently, only integer(1) is supported.rw Enumeration .1.3.6.1.4.1.2011.6.109.1.1.5 |
hwIpDslamL2pPortConfigValueIndicates the value of the configured object. Because some configured objects
must be of the integer type while others may be of the character string type,
the values of the configured objects must be input as a character string when
the objects are configured through this leaf. The length of the character string
is 0-255 characters.
When hwIpDslamL2pPortConfigObject is set to pppoeSessionCount(1),
the input range is (1..8) and the default value is 8.
When hwIpDslamL2pPortConfigObject is set to pitp(2), the input range is (1..2),
where 1 indicates enabled and 2 indicates disabled. The default value is 1.
When hwIpDslamL2pPortConfigObject is set to dhcpOption82(3), the input range is (1..2),
where 1 indicates enabled and 2 indicates disabled. The default value is 1.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.6.109.1.1.6 |
hwIpDslamL2pPortConfigRowStatusThis leaf must be set and issued if the configured object is the character string type.
Options:
1. active(1) -indicates query operation
2. createAndgo(4) -indicates setting operation
3. destroy(6) -indicates destroying operation
Currently, configured objects support only the integer type so this leaf can be ignored.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.109.1.1.7 |
hwIpDslamL2pSrvFlowConfigTableUsed for setting and querying the status of L2 enhanced features based on service port.
The indexes of this table are hwIpDslamL2pSrvFlowConfigIndex and hwIpDslamL2pSrvFlowConfigObject. SEQUENCE OF HwIpDslamL2pSrvFlowConfigEntry .1.3.6.1.4.1.2011.6.109.2 |
hwIpDslamL2pSrvFlowConfigEntryUsed for setting and querying the status of L2 enhanced features based on service port.
The indexes of this entry are hwIpDslamL2pSrvFlowConfigIndex and hwIpDslamL2pSrvFlowConfigObject. HwIpDslamL2pSrvFlowConfigEntry .1.3.6.1.4.1.2011.6.109.2.1 |
hwIpDslamL2pSrvFlowConfigIndexThe meaning and value of this leaf are the same as those of hwExtSrvFlowIndex in Huawei's MIB hwExtSrvFlowTable. Integer32 .1.3.6.1.4.1.2011.6.109.2.1.1 |
hwIpDslamL2pSrvFlowConfigObjectIndicates the configured object.
Options:
1. macSpoofingMacCount(1) -indicates the maximum number of MAC addresses that can
be bound to each service port for the anti-MAC spoofing
feature.
2. maxSessionCount(2) -indicates the maximum number of sessions that can be created
on each service port for the PPPoE SMAC service. This option
is supported by only the GPON service port.
3. pitp(3) -Enables/Disables PITP on a service port.
4. dhcpOption82(4) -Enables/Disables DHCP Option82 on a service port.
5. pitpPermitForwarding(5) -allow the user-side packet to carry PITP information.
This function is enabled or disabled based on service port.
6. option82PermitForwarding(6) -allow the user-side packet to carry DHCP Option82
information. This function is enabled or disabled based
on service port.
7. ipoeSmacMaxIpCount(7) -indicates the maximum number of IP addresses permitted by each
service port in the IPoE SMAC mode. Enumeration .1.3.6.1.4.1.2011.6.109.2.1.2 |
hwIpDslamL2pSrvFlowConfigTypeIndicates the type of the configured object.
Options:
1. integer(1) -integer type
2. string(2) -string type
Currently, only integer(1) is supported.rw Enumeration .1.3.6.1.4.1.2011.6.109.2.1.3 |
hwIpDslamL2pSrvFlowConfigValueIndicates the value of the configured object. Because some configured objects must
be of the integer type while others may be of the character string type, the values
of the configured objects must be input as a character string when the objects are
configured through this leaf. The length of the character string is 0-255 characters.
When hwIpDslamL2pSrvFlowConfigObject is set to macSpoofingMacCount(1), the input range
is {0..8} and the default value is 8.
When hwIpDslamL2pSrvFlowConfigObject is set to maxSessionCount(2), the input range is
{1..8} and the default value is 8.
When hwIpDslamL2pSrvFlowConfigObject is set to pitp(3), the input range is {1..2}, where
1 indicates enabled and 2 indicates disabled. The default value is 1.
When hwIpDslamL2pSrvFlowConfigObject is set to dhcpOption82(4), the input range is {1..2},
where 1 indicates enabled and 2 indicates disabled. The default value is 1.
When hwIpDslamL2pSrvFlowConfigObject is set to pitpForbidForwarding(5), the input range is
{1..2}, where 1 indicates enabled and 2 indicates disabled. The default value is 1.
When hwIpDslamL2pSrvFlowConfigObject is set to option82ForbidForwarding(6), the input range
is {1..2}, where 1 indicates enabled and 2 indicates disabled. The default value is 1.
When hwIpDslamL2pSrvFlowConfigObject is set to ipoeSmacMaxIpCount(7), the input range is
{1..8} and the default value is 8.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.6.109.2.1.4 |
hwIpDslamL2pSrvFlowConfigRowStatusIndicates the row status. This leaf must be set and issued together with the
configured object if the configured object is of the character string type.
This leaf must not be set or issued together with the configured object if
the configured object is of the integer type. For example, configured objects
max-session-count and ipoe-smac-max-ip-count are of the integer type, so the
row status must not be set or issued together with the configured objects in
relevant operations.
During the configuration of a character string type configured object, you need
to set the row status to createAndGo(4) and perform the set operation.
Perform the get operation to query the value of a character string type
configured object. The queried value of the row status is always active(1).
Options:
1. active(1) -indicates query operation
2. createAndgo(4) -indicates setting operation
3. destroy(6) -indicates destroying operationrwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.109.2.1.5 |
hwIpDslamL2pVlanCtrlTableUsed for setting and querying the status of L2 protocol features based on VLAN.
The index of this table is hwIpDslamL2pVlanCtrlIndex. SEQUENCE OF HwIpDslamL2pVlanCtrlEntry .1.3.6.1.4.1.2011.6.109.3 |
hwIpDslamL2pVlanCtrlEntryUsed for setting and querying the status of L2 protocol features based on VLAN.
The index of this entry is hwIpDslamL2pVlanCtrlIndex. HwIpDslamL2pVlanCtrlEntry .1.3.6.1.4.1.2011.6.109.3.1 |
hwIpDslamL2pVlanCtrlIndexUsed as the index for the VLAN-based feature control and is issued
together with various leaves corresponding to the features to be
configured.
Range: 1-4095 Integer32 .1.3.6.1.4.1.2011.6.109.3.1.1 |
hwIpDslamL2pVlanCtrlMacSpoofingUsed for setting or querying the anti-MAC-spoofing status of the VLAN.
Options:
1. disable(1) -indicates the anti-MAC-spoofing switch of the VLAN is off
2. enable(2) -indicates the anti-MAC-spoofing switch of the VLAN is on
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.109.3.1.2 |
hwIpDslamL2pVlanCtrlPppoeMacModeIndicates the MAC address mode of a PPPoE user.
Options:
1. multiMac(1) -indicates multiple MAC address mode of PPPoE user
2. singleMac(2) -indicates single MAC address mode of PPPoE user
Default: multiMac(1)rw Enumeration .1.3.6.1.4.1.2011.6.109.3.1.3 |
hwIpDslamL2pVlanCtrlDhcpBroadcastControlThe status of DhcpBroadcastControl switch.
Options:
1. disable(1) -indicates the DhcpBroadcastControl switch is off
2. enable(2) -indicates the DhcpBroadcastControl switch is onrw Enumeration .1.3.6.1.4.1.2011.6.109.3.1.4 |
hwIpDslamL2pVlanCtrlVmacStatusIdentifies the VMAC status of the specified VLAN, which is used for setting the VMAC status of the specified VLAN.
Options:
1. disable(1) -indicates the VMAC switch of the VLAN is off
2. enable(2) -indicates the VMAC switch of the VLAN is on
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.109.3.1.5 |
hwIpDslamL2pVlanCtrlVmacIpoeSubStatusIdentifies the IPoE VMAC status of the specified VLAN, which is used for setting the IPoE VMAC status of the specified VLAN.
Options:
1. disable(1) -indicates the IPoE VMAC switch of the VLAN is off
2. enable(2) -indicates the IPoE VMAC switch of the VLAN is on
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.109.3.1.6 |
hwIpDslamL2pVlanCtrlVmacPppoeSubStatusIdentifies the PPPoE VMAC status of the specified VLAN, which is used for setting the PPPoE VMAC status of the specified VLAN.
Options:
1. disable(1) -indicates the PPPoE VMAC switch of the VLAN is off
2. enable(2) -indicates the PPPoE VMAC switch of the VLAN is on
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.109.3.1.7 |
hwIpDslamL2pVlanCtrlVmacPppoaSubStatusIdentifies the PPPoA VMAC status of the specified VLAN, which is used for setting the PPPoA VMAC status of the specified VLAN.
Options:
1. disable(1) -indicates the PPPoA VMAC switch of the VLAN is off
2. enable(2) -indicates the PPPoA VMAC switch of the VLAN is on
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.109.3.1.8 |
hwIpDslamL2pVlanCtrlPppoaMacModeIndicates the MAC address mode of a PPPoA user.
Options:
1. multiMac(1) -indicates multiple MAC address mode of PPPoA user
2. singleMac(2) -indicates single MAC address mode of PPPoA user
Default: multiMac(1)rw Enumeration .1.3.6.1.4.1.2011.6.109.3.1.9 |
hwIpDslamL2pTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.109.4 |
hwIpDslamL2pSrvFlowConfigValueStrIndicates the value of the configured object.ro OCTET STRING .1.3.6.1.4.1.2011.6.109.4.1 |
hwIpDslamL2pTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.109.5 |
hwIpDslamL2pAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.109.5.1 |
hwIpDslamL2pCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.109.5.2 |
hwIpDslamL2pCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.109.5.2.0 |
hwIpDslamL2pSrvFlowConfigChangeTrapThe SNMP trap that is generated when service port config change. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.109.5.2.0.1 |