HUAWEI-IF-EXT-MIB
AI MIB Summary
The HUAWEI-IF-EXT-MIB module extends standard interface monitoring on Huawei network devices by exposing proprietary attributes for interface IP configurations and trunking parameters. It enables precise tracking of extended interface states, VLAN trunking details, and IP address assignments not covered by standard MIB-II interface tables.
Some attribute of interface extended content, information of interface IP, interface of trunk interface.
Main OID:
hwIFExtMib.1.3.6.1.4.1.2011.5.25.41
434
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
434 total| Object Name |
|---|
hwIFExtMibSome attribute of interface extended content, information of
interface IP, interface of trunk interface. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.41 |
hwIFExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1 |
hwIFExtBase OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.1 |
hwIFExtTableInterface extended table of private mib. SEQUENCE OF HwIFExtEntry .1.3.6.1.4.1.2011.5.25.41.1.1.1 |
hwIFExtEntryEntries of private extended interface table. HwIFExtEntry .1.3.6.1.4.1.2011.5.25.41.1.1.1.1 |
hwIFExtIndexIndex of extended table of interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.1 |
hwIFExtLayerSwitch the port between Layer3 and Layer2. Corresponding to the
port switch command.Layer2(1) is 1 when the port switch from layer3
to layer2.Layer3(1) is 1 when the port switch from lyaer2 to
layer3.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.2 |
hwIFExtFrameTypeFrame type is accepted by VLAN virtual interfaces.Frame format
contains ethernetII(1),ethernetII(2),ethernet8022(3),ethernet8023.
The type location setting 1 when the ethernetII(1) type is
accepted.Now only surpport the first(ethernetII(1))ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.3 |
hwIFExtFlowStatIntervalInterval of interface flow stat.The value of interval must be divided
exactly by 10.The interface interval is effective,when both interface
interval and global interval are config.Globle interval is only effective
in interfaces,which interface interval is not configured. The real time
property of interface flow stat rate will be affected by the value of
interval.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.4 |
hwIFExtFlushReceiveEnableWhether or not permit the port to take over FLUSHDUs. Once it is enabled,
the port will take over SmartLink FlushDUs from related vlans so as to delete
the MAC forwarding table in the local equipment.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.5 |
hwIFExtFlushVlanIdThe ID of Vlan the port belongs to.When it is 0, it indicates
the function of receiving FlushPDU is disabled.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.6 |
hwIFExtFlushPasswdA 16-octet read-write value used to define the password for negotiation.rw SnmpPasswdString .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.7 |
hwIFExtFlowStatusCurrent flow status of interface.
1:flow up
2:flow downro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.8 |
hwIFExtMtuThe Max Transmit Unit of the interface.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.9 |
hwIFExtMacAddrThe MAC address of the interface .rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.10 |
hwIFExtBlockPriorityThe blocked priority of the interface.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.11 |
hwIFExtMacShiftThe mac-shift state of the interface.
1:normal
2:monitor mac-shiftrw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.12 |
hwIFExtSuppressStatusThe suppress state of the interface.
0:unsuppress
1:suppressro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.13 |
hwIFExtPoisonReverseWhether or not enable Split-horizon forwardingrw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.14 |
hwIFExtInputPktRateThis object indicates the rate of the incoming packets on an interface.
The rate value is 64 bits. hwIFExtInputPktRate indicates the lower 32 bits,
while hwIFExtInputHighPktRate indicates the higher 32 bits.ro Gauge32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.15 |
hwIFExtInputHighPktRateThis object indicates the rate of the incoming packets on an interface.
The rate value is 64 bits. hwIFExtInputPktRate indicates the lower 32 bits,
while hwIFExtInputHighPktRate indicates the higher 32 bits.ro Gauge32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.16 |
hwIFExtOutputPktRateThis object indicates the rate of the outgoing packets on an interface.
The rate value is 64 bits. hwIFExtOutputPktRate indicates the lower 32 bits,
while hwIFExtOutputHighPktRate indicates the higher 32 bits.ro Gauge32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.17 |
hwIFExtOutputHighPktRateThis object indicates the rate of the outgoing packets on an interface.
The rate value is 64 bits. hwIFExtOutputPktRate indicates the lower 32 bits,
while hwIFExtOutputHighPktRate indicates the higher 32 bits.ro Gauge32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.18 |
hwIFExtInputOctetRateThis object indicates the octet rate of the incoming traffic on an interface.
The rate value is 64 bits. hwIFExtInputOctetRate indicates the lower 32 bits,
while hwIFExtInputHighOctetRate indicates the higher 32 bits.ro Gauge32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.19 |
hwIFExtInputHighOctetRateThis object indicates the octet rate of the incoming traffic on an interface.
The rate value is 64 bits. hwIFExtInputOctetRate indicates the lower 32 bits,
while hwIFExtInputHighOctetRate indicates the higher 32 bits.ro Gauge32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.20 |
hwIFExtOutputOctetRateThis object indicates the octet rate of the outgoing traffic on an interface.
The rate value is 64 bits. hwIFExtOutputOctetRate indicates the lower 32 bits,
while hwIFExtOutputHighOctetRate indicates the higher 32 bits.ro Gauge32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.21 |
hwIFExtOutputHighOctetRateThis object indicates the octet rate of the outgoing traffic on an interface.
The rate value is 64 bits. hwIFExtOutputOctetRate indicates the lower 32 bits,
while hwIFExtOutputHighOctetRate indicates the higher 32 bits.ro Gauge32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.22 |
hwIFExtSwitchPortIndexNumber of layer2 interface port, a unique value,
for each port.It is recommended that values are assigned
contiguously starting from 1.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.23 |
hwIFExtSuppressStatusIPv6The suppress state of the interface(IPv6).
0:unsuppress
1:suppressro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.24 |
hwIFExtPhyStatusThe physical status of member interface.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.1.2 |
hwIFExtMemberOfThe description of the main interface which has the membership with the member interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.1.3 |
hwLinkModeChangeAutoCreateIfTableInterface extended table of private mib. SEQUENCE OF HwLinkModeChangeAutoCreateIfEntry .1.3.6.1.4.1.2011.5.25.41.1.1.4 |
hwLinkModeChangeAutoCreateIfEntryEntries of private extended interface table. HwLinkModeChangeAutoCreateIfEntry .1.3.6.1.4.1.2011.5.25.41.1.1.4.1 |
hwAutoIfIndexIndex of extended table of interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.1.4.1.1 |
hwNewIfTimeslotThe time slot of the TDM interface:
timeslot0(0):The time slot 0 on the TDM interface,
timeslot1(1):The time slot 1 on the TDM interface,
timeslot2(2):The time slot 2 on the TDM interface,
timeslot3(3):The time slot 3 on the TDM interface,
timeslot4(4):The time slot 4 on the TDM interface,
timeslot5(5):The time slot 5 on the TDM interface,
timeslot6(6):The time slot 6 on the TDM interface,
timeslot7(7):The time slot 7 on the TDM interface,
timeslot8(8):The time slot 8 on the TDM interface,
timeslot9(9):The time slot 9 on the TDM interface,
timeslot10(10):The time slot 10 on the TDM interface,
timeslot11(11):The time slot 11 on the TDM interface,
timeslot12(12):The time slot 12 on the TDM interface,
timeslot13(13):The time slot 13 on the TDM interface,
timeslot14(14):The time slot 14 on the TDM interface,
timeslot15(15):The time slot 15 on the TDM interface,
timeslot16(16):The time slot 16 on the TDM interface,
timeslot17(17):The time slot 17 on the TDM interface,
timeslot18(18):The time slot 18 on the TDM interface,
timeslot19(19):The time slot 19 on the TDM interface,
timeslot20(20):The time slot 20 on the TDM interface,
timeslot21(21):The time slot 21 on the TDM interface,
timeslot22(22):The time slot 22 on the TDM interface,
timeslot23(23):The time slot 23 on the TDM interface,
timeslot24(24):The time slot 24 on the TDM interface,
timeslot25(25):The time slot 25 on the TDM interface,
timeslot26(26):The time slot 26 on the TDM interface,
timeslot27(27):The time slot 27 on the TDM interface,
timeslot28(28):The time slot 28 on the TDM interface,
timeslot29(29):The time slot 29 on the TDM interface,
timeslot30(30):The time slot 30 on the TDM interface,
timeslot31(31):The time slot 31 on the TDM interface.ro Bits .1.3.6.1.4.1.2011.5.25.41.1.1.4.1.2 |
hwIFExtPhyNumberThe number of the physical interfaces.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.1.5 |
hwInterfaceIp OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.2 |
hwIfIpTableInterface IP address configuration table .It contains IP address,
IP address mask, IP address acquiring method. SEQUENCE OF HwIfIpEntry .1.3.6.1.4.1.2011.5.25.41.1.2.1 |
hwIfIpEntryInterface IP address configuration HwIfIpEntry .1.3.6.1.4.1.2011.5.25.41.1.2.1.1 |
hwIpAdEntAddrThe IP address to which this entry's addressing
information pertains.ro IpAddress .1.3.6.1.4.1.2011.5.25.41.1.2.1.1.1 |
hwIpAdEntIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.2.1.1.2 |
hwIpAdEntNetMaskThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the host bits set to 0.rw IpAddress .1.3.6.1.4.1.2011.5.25.41.1.2.1.1.3 |
hwIpAdEntBcastAddrThe value of the least-significant bit in the IP
broadcast address used for sending datagrams on
the (logical) interface associated with the IP
address of this entry. For example, when the
Internet standard all-ones broadcast address is
used, the value will be 1. This value applies to
both the subnet and network broadcasts addresses
used by the entity on this (logical) interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.2.1.1.4 |
hwIpAdEntReasmMaxSizeThe size of the largest IP datagram which this
entity can re-assemble from incoming IP fragmented
datagram received on this interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.2.1.1.5 |
hwIpAdEntAddressTypeThe flag indicates whether the IP address is primary IP address.
One interface has only one primary IP address, but can have many sub IP address.
So when add a primary IP address to an interface that has already a primary IP address,
the new primary address will replace old primary address and the old primary address will be deleted.rw HwIpAddressType .1.3.6.1.4.1.2011.5.25.41.1.2.1.1.6 |
hwIfIpMethodInterface IP address acquiring method.
assignedIp(1) indicates that the address was manually configured
to a specified address, for example, by user configuration.
dhcpIp(2) indicates an address that was assigned to this
system by a DHCP server.
bootpIp(3) indicates an address that was assigned to this
system by the bootp protocol.
other(4) indicates an address created by another method.
linklayer(5) indicates an address created by IPv6 stateless
auto-configuration.
random(6) indicates an address chosen by the system at
random, for example, an IPv4 address within 169.254/16, or an RFC
3041 privacy address.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.2.1.1.7 |
hwIpAdEntAddrStatusThe row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.2.1.1.8 |
hwIfIpUnnumberedTableInterface IP address unnumbered table.
It contains lend IP address and lend IP address mask. SEQUENCE OF HwIfIpUnnumberedEntry .1.3.6.1.4.1.2011.5.25.41.1.2.2 |
hwIfIpUnnumberedEntryInterface IP address unnumbered configuration HwIfIpUnnumberedEntry .1.3.6.1.4.1.2011.5.25.41.1.2.2.1 |
hwUnnumberedIfIndexThe index value of the unnumbered interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.2.2.1.1 |
hwLendIfIndexThe index value of the lend interface.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.2.2.1.11 |
hwLendIpAddrThe IP address of the lend interface.ro IpAddress .1.3.6.1.4.1.2011.5.25.41.1.2.2.1.12 |
hwLendIpAddrNetMaskThe IP address mask of the lend interface.ro IpAddress .1.3.6.1.4.1.2011.5.25.41.1.2.2.1.13 |
hwUnnumberedRowStatusThe row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.2.2.1.51 |
hwIfIpAddrTableThis table contains addressing information relevant to the
entity's interfaces. SEQUENCE OF HwIfIpAddrEntry .1.3.6.1.4.1.2011.5.25.41.1.2.3 |
hwIfIpAddrEntryInterface IP address configuration HwIfIpAddrEntry .1.3.6.1.4.1.2011.5.25.41.1.2.3.1 |
hwIfIpAddrEntIfIndexThe index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.1 |
hwIfIpAddrEntAddrThe IP address to which this entry's addressing
information pertains. IpAddress .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.2 |
hwIfIpAddrEntTypeThe type of address.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.3 |
hwIfIpAddrEntPrefixThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the host bits set to 0.ro IpAddress .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.4 |
hwIfIpAddrEntOriginInterface IP address acquiring method.
assignedIp(1) indicates that the address was manually configured
to a specified address, for example, by user configuration.
dhcpIp(2) indicates an address that was assigned to this
system by a DHCP server.
bootpIp(3) indicates an address that was assigned to this
system by the bootp protocol.
other(4) indicates an address created by another method.
linklayer(5) indicates an address created by IPv6 stateless
auto-configuration.
random(6) indicates an address chosen by the system at
random, for example, an IPv4 address within 169.254/16, or an RFC
3041 privacy address.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.5 |
hwIfIpAddrEntStatusThe status of the address, describing if the address can be
used for communication.
In the absence of other information, an IPv4 address is
always preferred(1).ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.6 |
hwIfIpAddrEntCreatedThe value of sysUpTime at the time this entry was created.
If this entry was created prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.7 |
hwIfIpAddrEntLastChangedThe value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.8 |
hwIfIpAddrEntBcastAddrThe value of the least-significant bit in the IP
broadcast address used for sending datagrams on
the (logical) interface associated with the IP
address of this entry. For example, when the
Internet standard all-ones broadcast address is
used, the value will be 1. This value applies to
both the subnet and network broadcasts addresses
used by the entity on this (logical) interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.9 |
hwIfIpAddrEntReasmMaxSizeThe size of the largest IP datagram which this
entity can re-assemble from incoming IP fragmented
datagram received on this interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.10 |
hwIfIpAddrEntAddrTypeThe flag indicates whether the IP address is primary IP address.ro HwIpAddressType .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.11 |
hwIfIpAddrEntVpnThe vpn name of ip address.The public address does not have any value.ro DisplayString .1.3.6.1.4.1.2011.5.25.41.1.2.3.1.12 |
hwTrunkAttr OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.3 |
hwTrunkIfMaxThe maximum of Trunk interfacero Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.1 |
hwTrunkNextIndexThe nextindex of Trunk interface,that means its positionro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.2 |
hwTrunkIfTableThe trunk table. SEQUENCE OF HwTrunkIfEntry .1.3.6.1.4.1.2011.5.25.41.1.3.3 |
hwTrunkIfEntryEntries of the trunk table. HwTrunkIfEntry .1.3.6.1.4.1.2011.5.25.41.1.3.3.1 |
hwTrunkIndexThe number of the Trunk interface Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.1 |
hwTrunkIfIDThe identification of the Trunk interface.It may identify Trunk
and is an index of the interface.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.2 |
hwTrunkIfTypeThe type of the Trunk interface includes eth-trunk and ip-trunk.
The ip-trunk is only comprised by pos link, otherwise the eth-trunk
is only comprised by ethernet link.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.3 |
hwTrunkIfIndexIndex number of the Trunk interface,it is consistent with ifIndex
of ifTable in IF-MIB.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.4 |
hwTrunkIfModelParticipated model of interface load. sourceDesMac(2) and
sourceMac(10) and desMac(11) are Layer2 hash arithmetic.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.5 |
hwTrunkIfBandWidthAffectLinkNumThe max bandwidth-affected-linknumber,
by default, an Eth-Trunk interface has a
maximum of 16 physical interfaces.
The number of physical interfaces in an
Eth-Trunk interface varies according to
the product type.Only in layer 2,can set this value.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.6 |
hwTrunkIfMinLinkNumThe Trunk port changes to up when the number of the up port reach hwTrunkIfMinLinkNum.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.7 |
hwTrunkIfRowStatusCurrent operation status of the rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.8 |
hwTrunkIfWorkingModeCurrent working mode of trunk.
1:master/backup access mode
2:normal mode
3:lacp static mode
4:lacp compatible mode
5:port standby moderw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.9 |
hwTrunkIfWorkingStateCurrent working state of backup-access trunk.
1:general mode working state
2:initialization
3:master working
4:backup workingro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.10 |
hwTrunkIfAutoRecoverIf auto-recover has been set, the master port will be
working instead of the other port when it changes from
down state to up state.
1: don't support auto-recover
2: support auto-recoverrw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.11 |
hwTrunkIfPreemptEnableThe preemption according to the priority will be and only be enabled when the lag port is working in static mode(M:N backup mode)
In default condition, the preemption is disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.12 |
hwTrunkIfPreemptDelayThe waiting time for priority preemption; Unit: second.
It is enabled only when the priority preemption is enabled.
It indicates, When it comes to priority preemption, the operation
of preemption will be delayed for hwTrunkIfPreemptDelay time.
The specific minimum specification depends on products.rw Integer32 (0..180 | -1) .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.13 |
hwTrunkIfTimeoutReceiveThe expired time for the port to receive LACPDUS.
There are two types:
1.fast: The default value is customized with products.
2.slow: 90 secondsrw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.14 |
hwTrunkIfFlushSendEnableWhether or not permit the trunk to transmit FlushDUs.It is only used
when it is in the handwork 1:1 mode.Once it is enabled, the newly active
interface in the trunk will send SmartLink FlushDUs so as to delete the
related MAC forwarding table of the layer2 equipment in network.Otherwise,
SmartLink FlushDUs will not be sent.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.15 |
hwTrunkIfFlushVlanIdThe ID of Vlan the partner port belongs to.When it is 0, it indicates
the function of sending FlushPDU is disabled.rw Integer32 (0..4094 | -1) .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.16 |
hwTrunkIfFlushPasswdA 16-octet read-create value used to define the password for negotiation.rw SnmpPasswdString .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.17 |
hwTrunkIfForceSwitchEnableIt is only used when it is in the handwork 1:1 mode and the current
working link is the backup link. At that time, working link will move
from backup link to master link. However, if the master link is down,
the operation will be forbidden.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.18 |
hwTrunkIfStatResetReset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx,
MarkerResponsePDUsTx for all the ports in the current trunk.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.19 |
hwTrunkBandwidthCurrent bandwidth of trunk in units of 1,000,000 bits per second. This bandwidth is the peculiar property of Eth-Trunk. And to the other kinds of trunk, this bandwidth is -1.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.20 |
hwTrunkIfArpSendSpeedIndicates the rate of sending gratuitous ARP packets (in pkts/sec) on the trunk member interface.rw Integer32(800..3000 | -1) .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.21 |
hwTrunkIfLagSelectedPortStdThe static mode Eth-trunk selected port standard.
There are two types:
1.speed : selected by port's speed
2.priority: selected by port's priority
The default type is priority.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.22 |
hwTrunkIfLagMaxActiveLinkNumThe static mode Eth-trunk selected ports can not more than the value.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.23 |
hwTrunkETrunkPriorityThe priority of the E-Trunk.rw Integer32 (0..65535 | -1) .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.24 |
hwTrunkETrunkSysIDThe system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.25 |
hwTrunkETrunkPriorityResetStatus of operation, there are yes(1) and no(2).
It expresses whether the configure of E-Trunk priority is resetted.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.26 |
hwTrunkETrunkSysIDResetStatus of operation, there are yes(1) and no(2).
It expresses whether the configure of E-Trunk system ID is resetted.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.27 |
hwTrunkLocalPrefModeLocal-preference transmit mode of eth-trunk, there are enable(1) and disable(2).The default value is enable(1).rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.28 |
hwTrunkIfTrackVrrpVridThe VRID which the static mode Eth-trunk tracked to.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.29 |
hwTrunkIfTrackVrrpIfIndexThe VRRP interface which the static mode Eth-trunk tracked to.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.30 |
hwTrunkIfTrackVrrpResetStatus of operation, there are yes(1) and no(2).
The value of this object identifies whether
the operation of clearing the configuration
is performed. And the configuration is that
the Eth-Trunk interface in static LACP mode
is associated with an mVRRP backup group.
The value yes(1) indicates performing the operation.
This object indicates one operation but not one status,
so when the operation is performed, the value is no(2).
By default, the value is no(2).rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.31 |
hwTrunkIfBackupPreemptEnableThe preemption according to the master and slave port will be and only be enabled when eth-trunk is working in backup mode.
In default condition, the preemption is disabled.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.32 |
hwTrunkIfBackupPreemptDelayThe waiting time for priority preemption; Unit: minute.
It is enabled only when the priority preemption is enabled.
It indicates, When it comes to priority preemption, the operation
of preemption will be delayed for hwTrunkIfBackupPreemptDelay time.rw Integer32 (0..30 | -1) .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.33 |
hwTrunkIfCrcErrorSwitchEnablemake trunk member port stop in use if the port have crc error exceed the config threshold, the trunk would be down if member port in use is lowrw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.34 |
hwTrunkIfLagTimeOutThe expired time(Unit is second) of the port to receive LACPDUS in the fast mode.
The hwTrunkIfTimeoutReceive is the type of timeout and use hwTrunkIfLagTimeOut to change time in the fast mode.
The default value is customized with products.
If the mode is not fast, the value is always 0.rw Integer32 (3..90 | 0) .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.35 |
hwTrunkMemCountThe count of Trunk member interfaces per Trunk.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.36 |
hwTrunkSystemPriorityThe priority of the system.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.4 |
hwTrunkUnknownUnicastIfModelParticipated model of load for unknown unicast. sourceDesMac(2) and
sourceMac(10) and desMac(11) are Layer2 hash arithmetic.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.3.5 |
hwTrunkETrunkSystemPriorityThe system priority of the E-Trunk.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.6 |
hwTrunkETrunkSystemIDThe system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.3.7 |
hwTrunkCountNumber of configured trunk interfaces on the device.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.8 |
hwTrunkMemberCountUpperThresholdUpper threshold for the number of members of the Eth-Trunk in LACP mode.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.9 |
hwTrunkMemberCountLowerThresholdLower threshold for the number of members of the Eth-Trunk in LACP mode.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.3.10 |
hwTrunkMemAttr OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.4 |
hwTrunkMemTableTrunk member attribute information table. SEQUENCE OF HwTrunkMemEntry .1.3.6.1.4.1.2011.5.25.41.1.4.1 |
hwTrunkMemEntryTrunk member attribute information HwTrunkMemEntry .1.3.6.1.4.1.2011.5.25.41.1.4.1.1 |
hwTrunkMemifIndexTrunk port index Integer32 .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.1 |
hwTrunkValidEntryValid Entries of Trunk interfacero Enumeration .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.2 |
hwTrunkSelectStatusSelected Status of Trunk Port.It is used LACP.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.3 |
hwTrunkLacpStatusIt is status of the LACP.ro EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.4 |
hwTrunkDeleteFlagFlag is set trunk_del_enable(1) or trunk_del_disable(2),
according to operation.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.5 |
hwTrunkOperstatusStatus of operation, indicates port status. There are trunk_up(1)
and trunk_down(2).It expresses whether port is shutdown.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.6 |
hwTrunkIsDefaultLagRecvWe don't sustain now, default value is false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.7 |
hwTrunkPortWeightPort weight, it expresses proportion of port in Trunk interface tablerw Unsigned32 .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.8 |
hwTrunkPortStandbyThe value is backup of Trunk Port.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.9 |
hwTrunkRowStatusCurrent operation status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.10 |
hwTrunkPortMasterMaster port of backup-access eth-trunk or not
1: port-slave
2: port-masterrw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.11 |
hwTrunkPortPriorityThe priority value assigned to this Trunk Port.
This 16-bit value is read-write.rw Integer32 (0..65535 | -1) .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.12 |
hwTrunkPortStatResetReset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx,
MarkerResponsePDUsTx for the current port.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.13 |
hwTrunkPortLacpModeThe mode of port joining Lacp.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.4.1.1.14 |
hwIFFlowStat OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.5 |
hwIFFlowStatGlobalIntervalGlobal interval of interface flow stat.The interface interval is effective,
when both interface interval and global interval are config.Globle interval
is only effective in interfaces,which interface interval is not configged.
Flow stat rate of interface will be affected by the value of interval.
The default value is 300s.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.5.1 |
hwIfStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.6 |
hwIfEtherStatTableEthernet Interface Statistic Table SEQUENCE OF HwIfEtherStatEntry .1.3.6.1.4.1.2011.5.25.41.1.6.1 |
hwIfEtherStatEntryEntry of Ethernet Interface Statistic Table HwIfEtherStatEntry .1.3.6.1.4.1.2011.5.25.41.1.6.1.1 |
hwIfEtherStatIfIndexThe index of L2 interface InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.1 |
hwIfEtherStatInPkts64OctetsThe number of recieved Packets whose size over 1518 bytesro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.5 |
hwIfEtherStatInPkts65to127OctetsThe number of recieved Packets whose size over 1518 bytesro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.6 |
hwIfEtherStatInPkts128to255OctetsThe number of recieved Packets whose size over 1518 bytesro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.7 |
hwIfEtherStatInPkts256to511OctetsThe number of recieved Packets whose size over 1518 bytesro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.8 |
hwIfEtherStatInPkts512to1023OctetsThe number of recieved Packets whose size over 1518 bytesro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.9 |
hwIfEtherStatInPkts1024to1518OctetsThe number of recieved Packets whose size over 1518 bytesro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.10 |
hwIfEtherStatInJumboPktsThe number of recieved Packets whose size over 1518 bytesro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.11 |
hwIfEtherStatInCRCPktsThe number of recieved Packets which have CRC checking errorsro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.12 |
hwIfEtherStatInLongPktsThe number of recieved Packets whose length is over maximum lengthro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.13 |
hwIfEtherStatInJabberPktsThe number of recieved Packets whose length is over maximum length
and wrong CRC checkingro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.14 |
hwIfEtherStatInFragmentPktsThe number of recieved Packets which have short size and wrong CRC checkingro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.15 |
hwIfEtherStatInUnderSizePktsThe number of recieved Packets which have short size but right CRC checkingro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.16 |
hwIfEtherStatInOverRunPktsThe number of recieved Packets whose queue overflowro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.17 |
hwIfEtherStatInPausePktsThe number of recieved control Framesro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.18 |
hwIfEtherStatOutJumboPktsThe number of sended Packets whose size over 1518 bytesro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.19 |
hwIfEtherStatOutOverflowPktsThe number of Packets whitch happen FIFO overflow errorro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.20 |
hwIfEtherStatOutUnderRunPktsThe number of Packets whitch happen FIFO emptyro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.21 |
hwIfEtherStatOutPausePktsThe number of sended control Framesro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.22 |
hwIfEthIfStatResetReset the Statistic information Counterrw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.23 |
hwIfEtherStatInDropEventPktsThe number of recieved Packets discarded for GBP full or back pressure discardro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.24 |
hwIfEtherStatInAlignmentPktsThe number of recieved Packets which have frame alignment errorro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.25 |
hwIfEtherStatInSymbolPktsThe number of recieved Packets which have unknown symbolsro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.26 |
hwIfEtherStatInIgnoredPktsThe number of recieved MAC control frames which have unknown opecodero Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.27 |
hwIfEtherStatInFramePktsThe number of recieved frames whose actual length differs with 802.3ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.28 |
hwIfEtherStatOutCollisionPktsThe number of sended collision Frames(only happen in the 10/100M port with half duplex mode)ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.29 |
hwIfEtherStatOutDeferredPktsThe number of sended deferred but not collision Frames(only happen in the 10/100M port)ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.30 |
hwIfEtherStatOutLateCollisionPktsThe number of sended deferred and collision Frames(only happen in the 10/100M port)ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.31 |
hwIfEtherStatOutExcessiveCollisionPktsThe number of sended failure Frames whose collision more than 16(only happen in the 10/100M port)ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.32 |
hwIfEtherStatOutBufferPurgationPktsThe number of sended Frames which is purged from the buffer because of long timero Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.1.1.33 |
hwIfSdhStatTableSdh/sonet Interface Statistic Table SEQUENCE OF HwIfSdhStatEntry .1.3.6.1.4.1.2011.5.25.41.1.6.2 |
hwIfSdhStatEntryEntry of Sdh/Sonet Interface Statistic Table HwIfSdhStatEntry .1.3.6.1.4.1.2011.5.25.41.1.6.2.1 |
hwIfSdhStatIfIndexThe index of sdh/sonet interface InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.6.2.1.1 |
hwIfSdhStatInCRCPktsThe number of recieved Packets which have CRC checking errorsro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.2.1.2 |
hwIfSdhStatInShortPktsThe number of recieved Packets whose length is under minimal lengthro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.2.1.3 |
hwIfSdhStatInLongPktsThe number of recieved Packets whose length is over maximum lengthro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.2.1.4 |
hwIfSdhStatOutOverRunPktsThe number of sent Packets whose queue overflowro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.2.1.5 |
hwIfSdhStatOutUnderRunPktsThe number of sent Packets whose queue underflowro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.2.1.6 |
hwIfSdhIfStatResetReset the Statistic information Counterrw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.6.2.1.7 |
hwIfAtmStatTableAtm Interface Statistic Table SEQUENCE OF HwIfAtmStatEntry .1.3.6.1.4.1.2011.5.25.41.1.6.3 |
hwIfAtmStatEntryEntry of Atm Interface Statistic Table HwIfAtmStatEntry .1.3.6.1.4.1.2011.5.25.41.1.6.3.1 |
hwIfAtmStatIfIndexThe index of atm interface InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.6.3.1.1 |
hwIfAtmStatInGoodCellsThe number of good cells recievedro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.3.1.2 |
hwIfAtmStatInIdleCellsThe number of idle cells recievedro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.3.1.3 |
hwIfAtmStatInCorrectedCellsThe number of recieved cells whitch have been corrected.ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.3.1.4 |
hwIfAtmStatInUncorrectedCellsThe number of recieved cells whitch can not be corrected.ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.3.1.5 |
hwIfAtmStatOutGoodCellsThe number of good cells sentro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.3.1.6 |
hwIfAtmStatOutIdleCellsThe number of idle cells sentro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.6.3.1.7 |
hwIfAtmIfStatResetReset the Statistic information Counterrw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.6.3.1.8 |
hwIfMonitorObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.7 |
hwIfMonitorThresholdTableAlarm monitor table SEQUENCE OF HwIfMonitorThresholdEntry .1.3.6.1.4.1.2011.5.25.41.1.7.1 |
hwIfMonitorThresholdEntryEntry of alarm monitor table HwIfMonitorThresholdEntry .1.3.6.1.4.1.2011.5.25.41.1.7.1.1 |
hwIfMonitorIndexIndex of alarm monitor table InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.1 |
hwIfMonitorCrcErrorStatisticsCrc error statistics valuero Counter64 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.2 |
hwIfMonitorCrcErrorThresholdCrc error alarm threshold,default value is 3 and 0 is an invalid valuerw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.3 |
hwIfMonitorCrcErrorIntervalCrc error alarm interval time(unit is second),default value is 10s and 0 is an invalid valuerw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.4 |
hwIfMonitorSdhErrorStatisticsSdh error statistics value only for B3ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.5 |
hwIfMonitorSdhErrorThresholdSdh error alarm threshold,only for B3,default value is 3 and 0 is an invalid valuerw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.6 |
hwIfMonitorSdhErrorIntervalSdh error alarm interval time(unit is second),only for B3,default value is 10s and 0 is an invalid valuerw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.7 |
hwIfMonitorInputRateInput rate percentage valuero Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.8 |
hwIfMonitorInputRateThresholdInput rate alarm threshold,default value is 100rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.9 |
hwIfMonitorOutputRateOutput rate percentage valuero Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.10 |
hwIfMonitorOutputRateThresholdOutput rate alarm threshold,default value is 100rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.11 |
hwIfMonitorPauseFrameStatisticsPause frame statistics valuero Counter64 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.12 |
hwIfMonitorPauseFrameThresholdPause frame alarm threshold,and 0 is an invalid valuerw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.13 |
hwIfMonitorPauseFrameIntervalPause frame alarm interval time(unit is second),and 0 is an invalid valuerw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.14 |
hwIfMonitorDelayValueDelay valuerw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.15 |
hwIfMonitorDelayThresholdDelay alarm thresholdrw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.16 |
hwIfMonitorJitterValueJitter valuerw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.17 |
hwIfMonitorJitterThresholdJitter alarm thresholdrw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.18 |
hwIfMonitorNameInterface's name of alarm monitor tablero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.19 |
hwIfMonitorSdhB1ErrorStatisticsSdh B1 error statistics valuero Counter64 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.20 |
hwIfMonitorSdhB1ErrorThresholdSdh B1 error alarm threshold,default value is 3rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.21 |
hwIfMonitorSdhB1ErrorIntervalSdh B1 error alarm interval time(unit is second),default value is 10srw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.22 |
hwIfMonitorSdhB2ErrorStatisticsSdh B2 error statistics valuero Counter64 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.23 |
hwIfMonitorSdhB2ErrorThresholdSdh error B2 alarm threshold,default value is 3rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.24 |
hwIfMonitorSdhB2ErrorIntervalSdh B2 error alarm interval time(unit is second),default value is 10srw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.25 |
hwIfMonitorSymbolErrorStatisticsSymbol error statistics valuero Counter64 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.26 |
hwIfMonitorSymbolErrorThresholdSymbol error alarm threshold,default value is 3rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.27 |
hwIfMonitorSymbolErrorIntervalSymbol error alarm interval time(unit is second),default value is 10srw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.28 |
hwIfMonitorBadBytesErrorStatisticsDescription.ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.40 |
hwIfMonitorBadBytesErrorThresholdDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.41 |
hwIfMonitorBadBytesErrorIntervalDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.7.1.1.42 |
hwIfMonitorGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.8 |
hwIfMonitorCrcEnabledStatusEnalbe or disable the crc error monitor, and the default value is disable.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.8.1 |
hwIfMonitorSdhEnabledStatusEnalbe or disable the sdh error monitor, and the default value is disable.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.8.2 |
hwIfMonitorInputRateEnabledStatusEnalbe or disable the input rate monitor, and the default value is disable.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.8.3 |
hwIfMonitorOutputRateEnabledStatusEnalbe or disable the output rate monitor, and the default value is disable.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.8.4 |
hwIfMonitorHalfDuplexEnabledStatusEnalbe or disable the half duplex monitor, and the default value is disable.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.8.5 |
hwIfMonitorPauseRisingEnabledStatusEnalbe or disable the pause frame rising monitor, and the default value is disable.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.8.6 |
hwIfMonitorPauseContinuingEnabledStatusEnalbe or disable the pause frame continuing monitor, and the default value is disable.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.8.7 |
hwifMonitorBadBytesEnabledStatusDescription.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.8.8 |
hwAdminVrrpMemberIf OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.9 |
hwIfFlowChangeTimeThe time indicates when the interface's flow status changes.roobsolete Integer32 .1.3.6.1.4.1.2011.5.25.41.1.9.1 |
hwAdminVrrpMemberIfTableThe interface bound to VRRP table.obsolete SEQUENCE OF HwAdminVrrpMemberIfEntry .1.3.6.1.4.1.2011.5.25.41.1.9.2 |
hwAdminVrrpMemberIfEntryEntries of the interface bound to VRRP table.obsolete HwAdminVrrpMemberIfEntry .1.3.6.1.4.1.2011.5.25.41.1.9.2.1 |
hwAdminVrrpMemberIfIndexThe number of the interface.obsolete InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.9.2.1.1 |
hwAdminVrrpVridThe administrator VRRP vrid.rwobsolete Integer32 .1.3.6.1.4.1.2011.5.25.41.1.9.2.1.2 |
hwAdminVrrpIfIndexThe administrator VRRP's configure interface index.rwobsolete InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.9.2.1.3 |
hwAdminVrrpMemberIfFlowStatusCurrent flow status of interface.
1:up
2:downroobsolete Enumeration .1.3.6.1.4.1.2011.5.25.41.1.9.2.1.4 |
hwAdminVrrpMemberIfRowStatusCurrent operation status of the row.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.9.2.1.5 |
hwIfFluxLimit OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.10 |
hwIfFluxLimitTableFlux limit table SEQUENCE OF HwIfFluxLimitEntry .1.3.6.1.4.1.2011.5.25.41.1.10.1 |
hwIfFluxLimitEntryEntry of flux limit table HwIfFluxLimitEntry .1.3.6.1.4.1.2011.5.25.41.1.10.1.1 |
hwIfFluxIfIndexInterface Index, same as ifIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.10.1.1.1 |
hwIfFluxVlanIdVlan ID.
0 is the default value VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.41.1.10.1.1.2 |
hwIfFluxDirectionLimit direction:
inbound (1)
outbound (2)rw HWDirectionType .1.3.6.1.4.1.2011.5.25.41.1.10.1.1.3 |
hwIfFluxLimitTypeFlux limit type: broadcastSuppression(1),multicastSuppression(2),unknownUnicastSuppression(3).rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.10.1.1.4 |
hwIfFluxCirCommitted Information Rate. Unit: kbps.
software QoS: 8..155000
hardware QoS: 100..10000000rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.10.1.1.5 |
hwIfFluxCbsCommitted Burst Size. Unit: byte
software QoS: 1875..19375000
hardware QoS: 64..33554432rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.10.1.1.6 |
hwIfFluxRowStatusRowStatus. Three actions are used: active,
createAndGo, destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.10.1.1.7 |
hwIfDiffServ OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.11 |
hwIfDiffServTableThe table describes the different service mode of interfaces. SEQUENCE OF HwIfDiffServEntry .1.3.6.1.4.1.2011.5.25.41.1.11.1 |
hwIfDiffServEntryInterface different service mode attribute configuration. HwIfDiffServEntry .1.3.6.1.4.1.2011.5.25.41.1.11.1.1 |
hwIfDiffServIndexThe index of L2 interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.11.1.1.1 |
hwIfDiffServModeDifferent service mode of the interface binding to a
VLL, default is uniform.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.11.1.1.2 |
hwIfDiffServServiceClassPHB in the ingress PE, the value must be
be,af1,af2,af3,af4,ef,cs6,cs7.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.11.1.1.3 |
hwIfDiffServColorRemarked color of packet in the ingress
PE, the value must be green,yellow,red.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.11.1.1.4 |
hwIfQuery OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.12 |
hwIfQueryTableInterface name table of private MIB. SEQUENCE OF HwIfQueryEntry .1.3.6.1.4.1.2011.5.25.41.1.12.1 |
hwIfQueryEntryEntries of private interface name table. HwIfQueryEntry .1.3.6.1.4.1.2011.5.25.41.1.12.1.1 |
hwIfNameThe name of the interface.The value of this object must
be the interface name assigned by the local device.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.41.1.12.1.1.1 |
hwIfIndexThe index of the interface. An index uniquely identifies
an interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.12.1.1.2 |
hwLogicIfAttrib OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.13 |
hwLogicIfTableLogic interface table. SEQUENCE OF HwLogicIfEntry .1.3.6.1.4.1.2011.5.25.41.1.13.1 |
hwLogicIfEntryLogic interface table. HwLogicIfEntry .1.3.6.1.4.1.2011.5.25.41.1.13.1.1 |
hwLogicIfIndexIndicates the interface index. The interface index to be created must be 0. Then the system automatically allocates an interface index. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.13.1.1.1 |
hwLogicIfMainIndexIndicates the interface index of the main interface to which the sub-interface belongs. For other interfaces, the interface index is 0.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.13.1.1.11 |
hwLogicIfTypeIndicates the interface type.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.13.1.1.12 |
hwLogicIfNameIndicates the interface name. The interface name must be a name without blank spaces and Tab characters.rw DisplayString .1.3.6.1.4.1.2011.5.25.41.1.13.1.1.13 |
hwLogicIfParaOneIndicates the extended attribute of the logical interface. The extended attribute takes effect only on the ATM sub-interface. The default extended attribute is P2MP. For sub-interfaces of other types, none is returned after the Get operation.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.13.1.1.14 |
hwLogicIfRowStatusIndicates the status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.13.1.1.51 |
hwLogicIfHelpTableLogic interface help table. SEQUENCE OF HwLogicIfHelpEntry .1.3.6.1.4.1.2011.5.25.41.1.13.2 |
hwLogicIfHelpEntryLogic interface help table. HwLogicIfHelpEntry .1.3.6.1.4.1.2011.5.25.41.1.13.2.1 |
hwLogicIfhelpTypeIndicates the types of logical interfaces that can be queried.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.13.2.1.1 |
hwLogicIfChassisNumberIndicates the ID of the chassis that supports the creation of the specified logical interface.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.41.1.13.2.1.2 |
hwLogicIfSlotNumberIndicates the ID of the slot that supports the creation of the specified logical interface.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.41.1.13.2.1.3 |
hwLogicIfCardNumberIndicates the number of the card that supports the creation of the specified logical interface.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.41.1.13.2.1.4 |
hwLogicIfMinIndicates the minimum port number of the specified logical interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.13.2.1.5 |
hwLogicIfMaxIndicates the maximum port number of the specified logical interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.13.2.1.6 |
hwLogicIfTotalIndicates the maximum number of the specified logical interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.13.2.1.7 |
hwLogicIfDynamicHelpTableLogic interface dynamic help table. SEQUENCE OF HwLogicIfDynamicHelpEntry .1.3.6.1.4.1.2011.5.25.41.1.13.3 |
hwLogicIfDynamicHelpEntryLogic interface dynamic help table. HwLogicIfDynamicHelpEntry .1.3.6.1.4.1.2011.5.25.41.1.13.3.1 |
hwLogicDynamicIfhelpTypeIndicates the types of logical interfaces that can be queried.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.13.3.1.1 |
hwLogicDynamicIfChassisNumberIndicates the ID of the chassis that that can be queried.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.13.3.1.2 |
hwLogicDynamicIfSlotNumberIndicates the ID of the slot that can be queried.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.13.3.1.3 |
hwLogicDynamicIfCardNumberIndicates the ID of the card that can be queried.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.13.3.1.4 |
hwLogicDynamicIfMinIndicates the minimum port number of the specified logical interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.13.3.1.5 |
hwLogicDynamicIfMaxIndicates the maximum port number of the specified logical interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.13.3.1.6 |
hwLogicDynamicIfTotalIndicates the maximum number of the specified logical interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.13.3.1.7 |
hwCppsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.14 |
hwCppsGlobalEnableWhether statistic function is enabled globally, and the default value is disable.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.14.1 |
hwCppsInterfaceTableCPU packet and byte statistic interface configuration table. SEQUENCE OF HwCppsInterfaceEntry .1.3.6.1.4.1.2011.5.25.41.1.14.2 |
hwCppsInterfaceEntryThe entry of hwCppsInterfaceTable. HwCppsInterfaceEntry .1.3.6.1.4.1.2011.5.25.41.1.14.2.1 |
hwCppsInterfaceIndexIndex number of the interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.14.2.1.1 |
hwCppsPortPvcEnableWhether statistic function is enabled on PVC.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.14.2.1.2 |
hwCppsPortVlanEnableWhether statistic function is enabled on VLAN.rw EnabledStatus .1.3.6.1.4.1.2011.5.25.41.1.14.2.1.3 |
hwCppsIfStatisticsTableCPU packet and byte statistic interface table. SEQUENCE OF HwCppsIfStatisticsEntry .1.3.6.1.4.1.2011.5.25.41.1.14.3 |
hwCppsIfStatisticsEntryThe entry of hwCppsIfStatisticsTable. HwCppsIfStatisticsEntry .1.3.6.1.4.1.2011.5.25.41.1.14.3.1 |
hwCppsIfStatisticsIndexIndex number of the interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.14.3.1.1 |
hwCppsInterfacePktStatisicPacket statistic information of the interface sent to CPU.ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.14.3.1.2 |
hwCppsInterfaceByteStatisicByte statistic information of the interface sent to CPU.ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.14.3.1.3 |
hwCppsResetInterfaceStatisicWhether to reset statistics.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.14.3.1.4 |
hwCppsAtmPvcTableCPU packet and byte statistic ATM PVC table. SEQUENCE OF HwCppsAtmPvcEntry .1.3.6.1.4.1.2011.5.25.41.1.14.4 |
hwCppsAtmPvcEntryThe entry of hwCppsAtmPvcTable. HwCppsAtmPvcEntry .1.3.6.1.4.1.2011.5.25.41.1.14.4.1 |
hwCppsAtmIfIndexIndex number of the interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.14.4.1.1 |
hwCppsAtmVpiVPI. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.5.25.41.1.14.4.1.2 |
hwCppsAtmVciVCI. AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.5.25.41.1.14.4.1.3 |
hwCppsAtmPvcPktStatisicPacket statistic information of the PVC sent to CPU.ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.14.4.1.4 |
hwCppsAtmPvcByteStatisicByte statistic information of the PVC sent to CPU.ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.14.4.1.5 |
hwCppsResetAtmPvcStatisicWhether to reset statistics.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.14.4.1.6 |
hwCppsPortVlanTableCPU packet and byte statistic port VLAN table. SEQUENCE OF HwCppsPortVlanEntry .1.3.6.1.4.1.2011.5.25.41.1.14.5 |
hwCppsPortVlanEntryThe entry of hwCppsPortVlanTable. HwCppsPortVlanEntry .1.3.6.1.4.1.2011.5.25.41.1.14.5.1 |
hwCppsPortIndexIndex number of the interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.14.5.1.1 |
hwCppsVlanIdVLAN ID. VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.41.1.14.5.1.2 |
hwCppsPortVlanPktStatisicPacket statistic information of the port sent to CPU.ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.14.5.1.3 |
hwCppsPortVlanByteStatisicByte statistic information of the port sent to CPU.ro Counter64 .1.3.6.1.4.1.2011.5.25.41.1.14.5.1.4 |
hwCppsResetPortVlanStatisicWhether to reset statistics.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.14.5.1.5 |
hwPortIsolationGroupAttrib OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.15 |
hwPortIsolationGroupTableLogic interface table. SEQUENCE OF HwPortIsolationGroupEntry .1.3.6.1.4.1.2011.5.25.41.1.15.1 |
hwPortIsolationGroupEntryLogic interface table. HwPortIsolationGroupEntry .1.3.6.1.4.1.2011.5.25.41.1.15.1.1 |
hwPortIsolationGroupIndexID of Port-Isolation-Group. Integer32 .1.3.6.1.4.1.2011.5.25.41.1.15.1.1.1 |
hwPortIsolationGroupPortListPortList of Port-Isolation-Group.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.41.1.15.1.1.2 |
hwPortIsolationGroupRowStatusIndicates the status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.15.1.1.3 |
hwVTrunkAttr OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.16 |
hwVTrunkIfTableThe vtrunk table. SEQUENCE OF HwVTrunkIfEntry .1.3.6.1.4.1.2011.5.25.41.1.16.1 |
hwVTrunkIfEntryEntries of the vtrunk table. HwVTrunkIfEntry .1.3.6.1.4.1.2011.5.25.41.1.16.1.1 |
hwVTrunkIfIndexThe IfIndex of the VTrunk interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.16.1.1.1 |
hwVTrunkIfIDThe identification of the VTrunk interface.It may identify VTrunk
and is an index of the interface.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.16.1.1.2 |
hwVTrunkIfTypeThe type of the VTrunk interface includes pos-Trunk, cpos-Trunk, atm-trunk
and atm-bundle.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.16.1.1.3 |
hwVTrunkIfRowStatusCurrent operation status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.16.1.1.50 |
hwVTrunkMemAttr OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.17 |
hwVTrunkMemTableVTrunk member attribute information table. SEQUENCE OF HwVTrunkMemEntry .1.3.6.1.4.1.2011.5.25.41.1.17.1 |
hwVTrunkMemEntryVTrunk member attribute information. HwVTrunkMemEntry .1.3.6.1.4.1.2011.5.25.41.1.17.1.1 |
hwVTrunkMemIfIndexVTrunk port index. Integer32 .1.3.6.1.4.1.2011.5.25.41.1.17.1.1.1 |
hwVTrunkIfnetIndexThe IfnetIndex of the VTrunk interface.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.17.1.1.2 |
hwVTrunkValidEntryValid Entries of VTrunk interface.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.17.1.1.3 |
hwVTrunkOperstatusStatus of operation, indicates port status. There are vtrunk_up(1)
and vtrunk_down(2).It expresses whether port is shutdown.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.17.1.1.4 |
hwVTrunkPortActiveActive port of backup-access vtrunk or not
1: portInactive
2: portActive.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.17.1.1.5 |
hwVTrunkRowStatusCurrent operation status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.17.1.1.50 |
hwMasterBackupTrunkSubinterfaceAttr OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.18 |
hwMasterBackupTrunkSubinterfaceTableMaster-Backup Trunk Subinterface attribute information table. SEQUENCE OF HwMasterBackupTrunkSubinterfaceEntry .1.3.6.1.4.1.2011.5.25.41.1.18.1 |
hwMasterBackupTrunkSubinterfaceEntryMaster-Backup Trunk Subinterface attribute information. HwMasterBackupTrunkSubinterfaceEntry .1.3.6.1.4.1.2011.5.25.41.1.18.1.1 |
hwBackupTrunkIfIndexThis object indicates index of master/backup trunk sub-interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.18.1.1.1 |
hwBackupStatusThe value of this object identifies backupStatus of master/backup trunk sub-interface.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.18.1.1.2 |
hwRevertiveModeThe value of this object identifies revertive-mode of master/backup trunk sub-interface.rw Enumeration .1.3.6.1.4.1.2011.5.25.41.1.18.1.1.3 |
hwWtrTimeThe value of this object identifies the wait-to-restore time of master/backup trunk sub-interface.rw Integer32 .1.3.6.1.4.1.2011.5.25.41.1.18.1.1.4 |
hwFlushVlanIdThis object indicates VLAN ID carried in a FlushPDU.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.41.1.18.1.1.5 |
hwVaspPort OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.19 |
hwVaspPortPeerMacTableVasp port peer MAC table. SEQUENCE OF HwVaspPortPeerMacEntry .1.3.6.1.4.1.2011.5.25.41.1.19.1 |
hwVaspPortPeerMacEntryVasp port peer MAC table entry. HwVaspPortPeerMacEntry .1.3.6.1.4.1.2011.5.25.41.1.19.1.1 |
hwVaspPortIfIndexThe index of interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.41.1.19.1.1.1 |
hwVaspPortNameThe name of vasp port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.19.1.1.2 |
hwVaspPortPeerMacThe peer MAC of port.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.19.1.1.3 |
hwIFExtTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.20 |
hwLinkDownReasonThe reason code of link changes.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.20.1 |
hwMainIfNameThe main interface name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.20.2 |
hwCfmOverPhysicalNameThe configuration of the interface board or interface card is restored.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.20.3 |
hwIpv6IfChangeDownReasonThe reason code of link changes.ro Enumeration .1.3.6.1.4.1.2011.5.25.41.1.20.4 |
hwTrunkIfDescrThe name of trunk interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.20.5 |
hwTrunkMemIfDescrThe name of trunk member interface..ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.20.6 |
hwTrunkActiveMemberThe number of active trunk members.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.20.7 |
hwIfExtTrapReasonThe reason of an event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.20.8 |
hwLacpOldPDUInfoThe old lacp PDU field.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.20.9 |
hwLacpNewPDUInfoThe new lacp PDU field.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.41.1.20.10 |
hwTrunkMapAttr OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.1.21 |
hwTrunkMapTableThe trunk map table. SEQUENCE OF HwTrunkMapEntry .1.3.6.1.4.1.2011.5.25.41.1.21.1 |
hwTrunkMapEntryEntries of the trunk map table. HwTrunkMapEntry .1.3.6.1.4.1.2011.5.25.41.1.21.1.1 |
hwTrunkMapTypeThe type of the Trunk interface includes eth-trunk and ip-trunk.
The ip-trunk is only comprised by pos link, otherwise the eth-trunk
is only comprised by ethernet link. Enumeration .1.3.6.1.4.1.2011.5.25.41.1.21.1.1.1 |
hwTrunkMapIDThe identification of the Trunk interface.It may identify Trunk
and is an index of the interface. Integer32 .1.3.6.1.4.1.2011.5.25.41.1.21.1.1.2 |
hwTrunkMapIndexThe number of the Trunk interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.41.1.21.1.1.3 |
hwIFExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.2 |
hwIFExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.2.1 |
hwIFExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.2.2 |
hwIFExtTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.3 |
hwTrunkWorkingSwitchhwTrunkWorkingSwitch.
1.hwTrunkIfID: The identification of the Trunk interface;
2.hwTrunkIfWorkingState: Current working state of backup-access trunk.
Index: hwTrunkIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.1 |
hwLacpNegotiateFailedThe member of LAG neither can take over PDU nor transmit PDUs. Send this trap when LACP protocol negotiation fails.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is the name of the trunk in the ifXTable of IF-MIB.
3.ifName: It is the name of the port in the ifXTable of IF-MIB.
Indexes: 1.hwTrunkIndex;
2.ifIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.2 |
hwLacpTotalLinkLossTotal loss of link bandwidth: it means that there is no member in the LAG group and the trap of MNCD(Member not Collecting/Distributing) occurs.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is in the ifXTable of IF-MIB.
Index: hwTrunkIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.3 |
hwLacpPartialLinkLossPart loss of link bandwidth: it means that some members in the LAG group aren't in the working-state,
making the number of ports in working-state smaller than the hwTrunkIfMinLinkNum. The trap of PLL(Partial Link Loss)
will be restrained by the trap of TLL(Total Link Loss).
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is in the ifXTable of IF-MIB.
Index: hwTrunkIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.4 |
hwIfFlowDownThis notification indicates the time when the interface's flow status changes
to flow down,and the reason. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.5 |
hwIfFlowUpThis notification indicates the time when the interface's flow status changes
to flow up,and the reason. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.6 |
hwIfNameChangeWhen a single-chassis device is upgraded to a multi-chassis device, the interface
information is changed and then the system sends a trap. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.7 |
hwIfNameChangeResumeWhen a multi-chassis restore a single-chassis device, the interface information
is changed and then the system sends a trap. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.8 |
hwExtLinkDownThis notification indicates the time when the member interface link status changes
to down.The ifDescr indicates the name of the member interface,the hwIFExtMemberOf indicates
the name of main interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.9 |
hwExtLinkUpThis notification indicates the time when the member interface link status changes
to up.The ifDescr indicates the name of the member interface,the hwIFExtMemberOf indicates
the name of main interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.10 |
hwLoopbackBlockThis notification indicates block state of the interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.11 |
hwLoopbackResumeThis notification indicates normal state of the interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.12 |
hwLacpNegotiateResumeNegotiation failure alarm is resumed.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is the name of the trunk in the ifXTable of IF-MIB.
3.ifName: It is the name of the port in the ifXTable of IF-MIB.
Indexes: 1.hwTrunkIndex;
2.ifIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.13 |
hwLacpTotalLinkLossResumeLink bandwidth lost totally is resumed.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is in the ifXTable of IF-MIB.
Index: hwTrunkIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.14 |
hwLacpPartialLinkLossResumeLink bandwidth lost partly is resumed.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is in the ifXTable of IF-MIB.
Index: hwTrunkIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.15 |
hwTrunkSubIfStateToMasterThis notification indicates BackupState of the Trunk subinterface.
1.hwIfName: The identification of the Trunk subinterface;
2.hwBackupStatus: Current working state of Trunk subinterface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.24 |
hwTrunkSubIfStateToSlaveThis notification indicates BackupState of the Trunk subinterface.
1.hwIfName: The identification of the Trunk subinterface;
2.hwBackupStatus: Current working state of Trunk subinterface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.25 |
hwEntityExtCfmOverSlotThe hwEntityExtCfmOverSlot notification will be displayed when the configuration of an interface board is restored. The object hwCfmOverPhysicalName idicates the name of the interface board. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.26 |
hwEntityExtCfmOverCardThe hwEntityExtCfmOverCard notification will be displayed when the configuration of an interface card is restored. The object hwCfmOverPhysicalName idicates the name of the interface card. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.27 |
hwExtAllMemberDownNotifyThis notification indicates the time when the last member interface link status changes to down.
The ifName indicates the name of the Trunk interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.28 |
hwExtAllMemberDownResumeThis notification indicates the time when the first member interface link status changes to up.
The ifName indicates the name of the Trunk interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.29 |
hwTrunkMemNumberChangeThe number of active trunk members changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.30 |
hwIfControlFlapSuppressThis notification indicates the time when the interface's status changes from unsuppress to suppress. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.31 |
hwIfControlFlapResumeThis notification indicates the time when the interface's status changes from suppress to unsuppress. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.32 |
hwExtInterfaceDeleteThis notification indicates the time when the interface was deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.33 |
hwLacpPartnerExpiredLossThe member of LAG receive expired PDU from partner. Send this trap when LACP protocol negotiation fails.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is the name of the trunk in the ifXTable of IF-MIB.
3.ifName: It is the name of the port in the ifXTable of IF-MIB.
Indexes: 1.hwTrunkIndex;
2.ifIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.34 |
hwLacpPDUChangeThe LACP member interface's status changed from selected to unselected due to the PDU change.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is the name of the trunk in the ifXTable of IF-MIB.
3.ifName: It is the name of the port in the ifXTable of IF-MIB.
4.hwLacpOldPDUInfo: It is the old PDU field of the port in the hwIFExtTrapObjects of hwIFExtMib.
5.hwLacpNewPDUInfo: It is the new PDU field of the port in the hwIFExtTrapObjects of hwIFExtMib.
6.hwIfExtTrapReason: It is the reason of this trap in the hwIFExtTrapObjects of hwIFExtMib.
Indexes: 1.hwTrunkIndex;
2.ifIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.35 |
hwLacpPDUChangeResumeThe LACP member interface's status changed from unselected to selected.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is the name of the trunk in the ifXTable of IF-MIB.
3.ifName: It is the name of the port in the ifXTable of IF-MIB.
Indexes: 1.hwTrunkIndex;
2.ifIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.36 |
hwIfEfmDownThis notification indicates that the interface status changes to EFM Down because the interface has tracked EFM session and the EFM session goes Down. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.37 |
hwIfEfmUpThis notification indicates that the interface status changes to EFM Up because the interface has tracked EFM session and the EFM session goes Up. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.38 |
hwExtTrunkMemberCountExceedThresholdThe number of members of the Eth-Trunk in LACP mode exceeded the upper threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.39 |
hwExtTrunkMemberCountExceedThresholdResumeThe number of members of the Eth-Trunk in LACP mode fell below the lower threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.40 |
hwExtTrunkWorkingStatusChangeThis notification indicates that the working status of the backup trunk changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.41 |
hwIfControlFlapSuppressIPv6This notification indicates the time when the interface's status changes from unsuppress to suppress(IPv6). NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.42 |
hwIfControlFlapResumeIPv6This notification indicates the time when the interface's status changes from suppress to unsuppress(IPv6). NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.3.43 |
hwMonitorNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.4 |
hwIfMonitorCrcErrorRisingCrc error alarm notification NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.1 |
hwIfMonitorCrcErrorResumeCrc error alarm resume NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.2 |
hwIfMonitorSdhErrorRisingSdh error alarm notification only for B3 NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.3 |
hwIfMonitorSdhErrorResumeSdh error alarm resume only for B3 NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.4 |
hwIfMonitorInputRateRisingInput rate alarm notification NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.5 |
hwIfMonitorInputRateResumeInput rate alarm resume NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.6 |
hwIfMonitorOutputRateRisingOutput rate alarm notification NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.7 |
hwIfMonitorOutputRateResumeOutput rate alarm resume NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.8 |
hwIfMonitorHalfDuplexRisingInterface half duplex alarm norification NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.9 |
hwIfMonitorPauseFrameRisingPause frame alarm notification NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.10 |
hwIfMonitorPauseFrameRisingResumePause frame alarm resume NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.11 |
hwIfPortControlUpControl Up alarm notification NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.12 |
hwIfPortControlDownControl Down alarm notification NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.13 |
hwIfMonitorSdhB1ErrorRisingSdh B1 error alarm notification NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.14 |
hwIfMonitorSdhB1ErrorResumeSdh B1 error alarm resume NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.15 |
hwIfMonitorSdhB2ErrorRisingSdh B2 error alarm notification NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.16 |
hwIfMonitorSdhB2ErrorResumeSdh B2 error alarm resume NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.17 |
hwIfMonitorSymbolErrorRisingSymbol error alarm notification NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.18 |
hwIfMonitorSymbolErrorResumeCrc error alarm resume NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.19 |
hwIfMonitorBadBytesErrorRisingDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.40 |
hwIfMonitorBadBytesErrorResumeDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.4.41 |
hwIFExtTrapConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.5 |
hwIFExtTrapGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.5.1 |
hwIFIpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.41.6 |
hwIfIpAddressChangeIP Trap Group.
The trap will be generated when the primary IP address of an interface changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.41.6.1 |