HUAWEI-ERPS-MIB
AI MIB Summary
The HUAWEI-ERPS-MIB module enables monitoring and management of Ethernet Ring Protection Switching (ERPS) protocol states, including ring topology status, protection switching events, and interface roles on Huawei data communication devices. It provides visibility into the operational health and failover mechanisms of carrier-grade Ethernet ring networks to ensure sub-50ms recovery times.
The private mib file includes the general extent information of the device.hwDatacomm(25).hwErpsMIB.
Main OID:
hwErpsMIB.1.3.6.1.4.1.2011.5.25.256
74
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
hwErpsMIBThe private mib file includes the general extent
information of the device.hwDatacomm(25).hwErpsMIB. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.256 |
hwErpsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.256.1 |
hwErpsGlobalResetRapsPktCntReset the RAPS packets counter of all running ERPS ports.
The value is unused(65535) when it is read. And it must be clear(1) when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.256.1.1 |
hwErpsRingConfigTableThe table includes the configurtion of ERPS rings. SEQUENCE OF HwErpsRingConfigEntry .1.3.6.1.4.1.2011.5.25.256.1.2 |
hwErpsRingConfigEntryThe table includes the configurtion of ERPS rings.
The index of the table is ERPS ring id. HwErpsRingConfigEntry .1.3.6.1.4.1.2011.5.25.256.1.2.1 |
hwConfigRingIdERPS ring Identifier.ro Integer32 .1.3.6.1.4.1.2011.5.25.256.1.2.1.1 |
hwConfigRingRowStatusOperation of CreateAndGo can be used to create a new ERPS ring,
and operation of Destroy be used to destroy an existent ERPS ring.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.256.1.2.1.2 |
hwConfigDescriptionA textual description of the ERPS ring.
It is mandatory that this only contain no more than 80 printable ASCII characters.rw DisplayString .1.3.6.1.4.1.2011.5.25.256.1.2.1.3 |
hwConfigControlVlanIdThe control VLAN identifier of the ERPS ring.
If the value of the object is set 0, the operation is to delete configuration.rw Integer32 (0 | 1..4094) .1.3.6.1.4.1.2011.5.25.256.1.2.1.4 |
hwConfigProtectedInstanceListThe protected instance list of the ERPS ring.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.256.1.2.1.5 |
hwConfigWtrTimerSettingValueThe setting value of the ring's wait to restore timer.rw Integer32 .1.3.6.1.4.1.2011.5.25.256.1.2.1.6 |
hwConfigGuardTimerSettingValueThe setting value of the ring's guard timer.rw Integer32 .1.3.6.1.4.1.2011.5.25.256.1.2.1.7 |
hwConfigHoldoffTimerSettingValueThe setting value of the ring's hold-off timer.rw Integer32 .1.3.6.1.4.1.2011.5.25.256.1.2.1.8 |
hwConfigResetRapsPktCntReset the RAPS packets counter of the ERPS ring's ports.
The value is unused(65535) when it is read. And it must be clear(1) when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.256.1.2.1.9 |
hwConfigRapsMelThe MEL is the maintenance entity group(MEG) level providing a communication channel for the ring RAPS information.rw Integer32 .1.3.6.1.4.1.2011.5.25.256.1.2.1.10 |
hwConfigVersionSet protocol version of the ERPS ring. The default version is v1.rw Enumeration .1.3.6.1.4.1.2011.5.25.256.1.2.1.11 |
hwConfigRevertiveModeSet revertive mode of the ERPS ring. The default mode is revertive.rw Enumeration .1.3.6.1.4.1.2011.5.25.256.1.2.1.12 |
hwConfigRingRoleSpecify the ERPS ring as sub-ring.rw Enumeration .1.3.6.1.4.1.2011.5.25.256.1.2.1.13 |
hwConfigRapsChannelModeSet RAPS channel of the sub-ring. By default, non-virtual channel is used.
unused(65535) is displayed when it is read if the ring is major ring.rw Enumeration .1.3.6.1.4.1.2011.5.25.256.1.2.1.14 |
hwConfigTcNotifyErpsRingSet the list of ERPS rings that will be notified when topology changes.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.256.1.2.1.15 |
hwConfigTcProtectionIntervalTime interval for topology change protection, in seconds. The default value is 2.rw Integer32 .1.3.6.1.4.1.2011.5.25.256.1.2.1.16 |
hwConfigTcProtectionThresholdThreshold of topology change protection. The default value is 3.rw Integer32 .1.3.6.1.4.1.2011.5.25.256.1.2.1.17 |
hwConfigProtectionSwitchCancel current configuration of the ERPS ring. The value is idle(65535) when it is read, and is clear(1) when the current configuration is canceled.rw Enumeration .1.3.6.1.4.1.2011.5.25.256.1.2.1.18 |
hwErpsRingStatusTableThe table includes the status of ERPS rings. SEQUENCE OF HwErpsRingStatusEntry .1.3.6.1.4.1.2011.5.25.256.1.3 |
hwErpsRingStatusEntryThe table includes the status of ERPS rings.
The index of the table is ERPS ring id. HwErpsRingStatusEntry .1.3.6.1.4.1.2011.5.25.256.1.3.1 |
hwStatusWtrTimerRunningValueThe running value of the ring's wait to restore timer.ro Integer32 .1.3.6.1.4.1.2011.5.25.256.1.3.1.1 |
hwStatusGuardTimerRunningValueThe running value of the ring's guard timer.ro Integer32 .1.3.6.1.4.1.2011.5.25.256.1.3.1.2 |
hwStatusHoldoffTimerRunningValueThe running value of the ring's hold-off timer.ro Integer32 .1.3.6.1.4.1.2011.5.25.256.1.3.1.3 |
hwStatusMachineStateThe Finite-state machine's state of the ERPS ring.
state value
idle 1
protection 2
manualSwitch 3
forcedSwitch 4
pending 5ro Enumeration .1.3.6.1.4.1.2011.5.25.256.1.3.1.4 |
hwStatusTopoLastChangeTimeThe time since last topology change of the ring.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.256.1.3.1.5 |
hwStatusWtbTimerRunningValueThe running value of the ring's wait to block timer.ro Integer32 .1.3.6.1.4.1.2011.5.25.256.1.3.1.6 |
hwErpsPortConfigTableThe table includes the configuration of ERPS ports. SEQUENCE OF HwErpsPortConfigEntry .1.3.6.1.4.1.2011.5.25.256.1.4 |
hwErpsPortConfigEntryThe table includes the configuration of ERPS ports.
The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4.
If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port.
the other port identifier is for extension and not used currently, should be set 0. HwErpsPortConfigEntry .1.3.6.1.4.1.2011.5.25.256.1.4.1 |
hwConfigPortTypeThe port type.Currently ERPS just supports ethernet port and the value is 1. Unsigned32 (1) .1.3.6.1.4.1.2011.5.25.256.1.4.1.1 |
hwConfigPortId1The port identifier1, when the hwConfigPortType is 1, the value of the object is the IfIndex of the port. Unsigned32 .1.3.6.1.4.1.2011.5.25.256.1.4.1.2 |
hwConfigPortId2The port identifier2, Currently it is not used and only for extension, should be set 0. Unsigned32 .1.3.6.1.4.1.2011.5.25.256.1.4.1.3 |
hwConfigPortId3The port identifier3, Currently it is not used and only for extension, should be set 0. Unsigned32 .1.3.6.1.4.1.2011.5.25.256.1.4.1.4 |
hwConfigPortId4The port identifier4, Currently it is not used and only for extension, should be set 0. Unsigned32 .1.3.6.1.4.1.2011.5.25.256.1.4.1.5 |
hwConfigPortRowStatusOperation of CreateAndGo can be used to have a port join the ERPS ring.
and operation of Destroy be used to have a port leave the ERPS ring.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.256.1.4.1.6 |
hwConfigPortConfigRoleThe configued port role:
role value
common 0x10
rplOwner 0x21
rplNeighbour 0x22rw Integer32 .1.3.6.1.4.1.2011.5.25.256.1.4.1.7 |
hwConfigPortProtectionSwitchSet the protection switch mode, including forced switch and manual switch. If no mode is set, idle(65535) is displayed.rw Enumeration .1.3.6.1.4.1.2011.5.25.256.1.4.1.8 |
hwErpsPortStatusTableThe table includes the status of ERPS ports. SEQUENCE OF HwErpsPortStatusEntry .1.3.6.1.4.1.2011.5.25.256.1.5 |
hwErpsPortStatusEntryThe table includes the status of ERPS ports.
The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4.
If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port.
the other port identifier is for extension and not used currently, should be set 0. HwErpsPortStatusEntry .1.3.6.1.4.1.2011.5.25.256.1.5.1 |
hwPortStatusActiveRoleThe active port role:
role value
common 0x10
rplOwner 0x21
rplNeighbour 0x22ro Integer32 .1.3.6.1.4.1.2011.5.25.256.1.5.1.1 |
hwPortStatusSignalStatusThe signal status of the port:
state value
failed 1
nonFailed 2ro Enumeration .1.3.6.1.4.1.2011.5.25.256.1.5.1.2 |
hwPortStatusFwdStatusThe forwarding status of the port:
state value
discarding 1
forwarding 2ro Enumeration .1.3.6.1.4.1.2011.5.25.256.1.5.1.3 |
hwErpsPortStatisticsTableThe table includes the statistics of ERPS ports. SEQUENCE OF HwErpsPortStatisticsEntry .1.3.6.1.4.1.2011.5.25.256.1.6 |
hwErpsPortStatisticsEntryThe table includes the Statistics of ERPS ports.
The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4.
If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port.
the other port identifier is for extension and not used currently, should be set 0. HwErpsPortStatisticsEntry .1.3.6.1.4.1.2011.5.25.256.1.6.1 |
hwRxRapsSfPktCntThe number of received RAPS SF packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.1 |
hwTxRapsSfPktCntThe number of transmitted RAPS SF packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.2 |
hwRxRapsNrPktCntThe number of received RAPS NR packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.3 |
hwTxRapsNrPktCntThe number of transmitted RAPS NR packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.4 |
hwRxRapsNrRbPktCntThe number of received RAPS NRRB packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.5 |
hwTxRapsNrRbPktCntThe number of transmitted RAPS NRRB packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.6 |
hwRxRapsFsPktCntThe number of received RAPS FS packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.7 |
hwTxRapsFsPktCntThe number of transmitted RAPS FS packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.8 |
hwRxRapsMsPktCntThe number of received RAPS MS packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.9 |
hwTxRapsMsPktCntThe number of transmitted RAPS MS packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.10 |
hwRxRapsEventPktCntThe number of received RAPS Event packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.11 |
hwTxRapsEventPktCntThe number of transmitted RAPS Event packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.256.1.6.1.12 |
hwErpsPortTrackTableThe table includes the information of ERPS ports track. SEQUENCE OF HwErpsPortTrackEntry .1.3.6.1.4.1.2011.5.25.256.1.7 |
hwErpsPortTrackEntryThe table includes the information of ERPS ports track.
The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4, protocol type.
If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port.
the other port identifier is for extension and not used currently, should be set 0. HwErpsPortTrackEntry .1.3.6.1.4.1.2011.5.25.256.1.7.1 |
hwErpsPortTrackProtocolTypeThe protocol type that ERPS port tracks. Currently ERPS port just supports tracking CFM. Enumeration .1.3.6.1.4.1.2011.5.25.256.1.7.1.1 |
hwErpsPortTrackRowStatusThe CreateAndGo operation enables an ERPS port to track the protocol. The Destroy operation disables an ERPS port from tracking the protocol.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.256.1.7.1.2 |
hwErpsPortTrackCfmMdNameThe name of maintenance domain.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.256.1.7.1.3 |
hwErpsPortTrackCfmMaNameThe name of maintenance association.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.256.1.7.1.4 |
hwErpsPortTrackCfmMepIdMEP ID.rw Integer32 .1.3.6.1.4.1.2011.5.25.256.1.7.1.5 |
hwErpsPortTrackCfmRmepIdRemote MEP ID.rw Integer32 .1.3.6.1.4.1.2011.5.25.256.1.7.1.6 |
hwErpsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.256.2 |
hwErpsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.256.3 |
hwErpsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.256.3.1 |
hwErpsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.256.4 |
hwErpsFwStateForwardingTrap message is generated by ERPS node when
it detects that the state of ERPS port changes to forwarding. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.256.4.1 |
hwErpsFwStateDiscardingTrap message is generated by ERPS node when
it detects that the state of ERPS port changes to discarding. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.256.4.2 |