HUAWEI-DSLAM-PITP-MIB
AI MIB Summary
The HUAWEI-DSLAM-PITP-MIB enables monitoring of Policy Information Transfer Protocol (PITP) bindings on Huawei DSLAM devices to map Broadband Remote Access Server (BRAS) user accounts to specific physical access ports. This mechanism facilitates the enforcement of port-based user authentication and prevents unauthorized account roaming or theft within the Huawei Group Management Protocol (HGMP) architecture.
This MIB module defines Huawei's Policy Information Transfer Protocol (PITP) MIB objects. PITP is a member of the Huawei Group Management Protocol (HGMP) family, and provides the Broadband Remote Access Server (BRAS) with the information about the port of access users. PITP binds user accounts to the access ports together to prevent theft and roaming of user accounts.
Main OID:
hwDslamPITP.1.3.6.1.4.1.2011.6.42
80
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
80 total| Object Name |
|---|
hwDslamPITPThis MIB module defines Huawei's Policy Information Transfer Protocol (PITP) MIB objects.
PITP is a member of the Huawei Group Management Protocol (HGMP) family, and provides the Broadband
Remote Access Server (BRAS) with the information about the port of access users. PITP binds user
accounts to the access ports together to prevent theft and roaming of user accounts. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.42 |
hwDslamPITPStatusIndicates the status of the global PITP switch.
Options:
1. disable(1) -indicates the global PITP switch is off
2. enableVmode(2) -indicates the global PITP switch is V mode
3. enablePmode(3) -indicates the global PITP switch is P mode
4. forwardPmode(4) -indicates not processing the vendor tag of the packet, but transparent it transmitted. Only for P mode
5. rebuildPmode(5) -indicates rebuild the vendor tag from the ONU device, to meet the TR-156 needs, only for P mode
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.42.1 |
hwDslamPITPVmodeEtherTypeIndicates the Ethernet protocol type of the PITP VBAS.
Range: 1536-65535, that is, 0x600-0xFFFF
Default: 33280(0x8200)
Restrictions: If the value set to a protocol type is the same as any of other protocol types in the system,
the setting fails.rw Unsigned32 .1.3.6.1.4.1.2011.6.42.2 |
hwDslamPITPXdslPortRateInfoSwitchXdsl port rate information switch, current support Adsl only.
Options:
1. disable(1) -indicates the Xdsl port rate information switch is off
2. enable(2) -indicates Xdsl port rate information switch is on
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.42.3 |
hwDslamPITPCNTelSwitchXdsl add BRAS information switch.
Options:
1. disable(1) -indicates the Xdsl add BRAS information switch is off
2. enable(2) -indicates Xdsl add BRAS information switch is on
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.42.4 |
hwDslamPITPTITagSwitchTI Add Dhcp && PITP Tag information switch
Options:
1. disable(1) -indicates the TI Add Dhcp && PITP Tag information switch is off
2. enable(2) -indicates the TI Add Dhcp && PITP Tag information switch is on
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.42.5 |
hwDslamPITPRAIOModeIndicates the RAIO mode of PPPoE plus/VBAS.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf
6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel
7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of PPPoE plus/VBAS is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of PPPoE plus/VBAS is dslForumDefault
10. brt(10) -indicates the RAIO mode of PPPoE plus/VBAS is brt
11. userDefined(11) -indicates the RAIO mode of PPPoE plus/VBAS is user defined
12. ft(12) -indicates the RAIO mode of PPPoE plus/VBAS is ft
13. cntelXpon(13) -indicates the RAIO mode of PPPoE plus/VBAS is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of PPPoE plus/VBAS is tm
15. bbf(15) -indicates the RAIO mode of PPPoE plus is bbf
16. vnpt(16) -indicates the RAIO mode of PPPoE plus is vnpt
Default: common(1)
Restrictions:
bt(7) is not supported.
The VBAS supports only common(1), cntel(3), and userDefined(11).
When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable.rw Enumeration .1.3.6.1.4.1.2011.6.42.6 |
hwDslamPITPPMODERAIOModeRAIO(Relay agent info Option) mode of PITP pmode.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf
6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel
7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt
8. bbf(15) -indicates the RAIO mode of PPPoE plus is bbf
Default: common(1)rw Enumeration .1.3.6.1.4.1.2011.6.42.7 |
hwDslamPITPVMODERAIOModeRAIO(Relay agent info Option) mode of PITP vmode.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS
Default: common(1)rw Enumeration .1.3.6.1.4.1.2011.6.42.8 |
hwDslamDHCPOPTION82RAIOModeIndicates the RAIO mode of DHCP Option82.
Options:
1. common(1) -indicates the RAIO mode of DHCP Option82 is common
2. xdslPortRate(2) -indicates the RAIO mode of DHCP Option82 is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of DHCP Option82 is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of DHCP Option82 is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of DHCP Option82 is neuf
6. portUserLabel(6) -indicates the RAIO mode of DHCP Option82 is portUserLabel
7. bt(7) -indicates the RAIO mode of DHCP Option82 is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of DHCP Option82 is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of DHCP Option82 is dslForumDefault
10. brt(10) -indicates the RAIO mode of DHCP Option82 is brt
11. userDefined(11) -indicates the RAIO mode of DHCP Option82 is user defined
12. ft(12) -indicates the RAIO mode of DHCP Option82 is ft
13. cntelXpon(13) -indicates the RAIO mode of DHCP Option82 is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of DHCP Option82 is tm
15. bbf(15) -indicates the RAIO mode of DHCP Option82 is bbf
16. vnpt(16) -indicates the RAIO mode of DHCP Option82 is vnpt
Default: common(1)
Restrictions:
bt(7) is not supported.
When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable.rw Enumeration .1.3.6.1.4.1.2011.6.42.9 |
hwDslamRAIOFormatTableUsed for querying the RAIO format; supports the setting of only the user-defined mode.
The indexes of this table are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDslamRAIOIfType. SEQUENCE OF HwDslamRAIOFormatEntry .1.3.6.1.4.1.2011.6.42.10 |
hwDslamRAIOFormatEntryUsed for querying the RAIO format; supports the setting of only the user-defined mode.
The indexes of this entry are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDslamRAIOIfType. HwDslamRAIOFormatEntry .1.3.6.1.4.1.2011.6.42.10.1 |
hwDslamRAIOObjectIndicates the RAIO object. This leaf is an index.
Options:
1. pitp(1) -indicates the RAIO object is pitp
2. dhcpOption82(2) -indicates the RAIO object is dhcpOption82
3. ancp(3) -indicates the RAIO object is ancp
4. dhcpv6Option(4) -indicates the RAIO object is dhcpv6Option Enumeration .1.3.6.1.4.1.2011.6.42.10.1.1 |
hwDslamRAIOIdParaIndicates the RAIO ID parameter. This leaf is an index.
Options:
1. cid(1) -indicates the RAIO object is cid
2. rid(2) -indicates the RAIO object is rid
3. info(3) -indicates the RAIO object is info Enumeration .1.3.6.1.4.1.2011.6.42.10.1.2 |
hwDslamRAIOModeIndicates the RAIO mode. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode is common
2. xdslPortRate(2) -indicates the RAIO mode is Xdsl port rate
3. cntel(3) -indicates the RAIO mode is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode is neuf
6. portUserLabel(6) -indicates the RAIO mode is portUserLabel
7. bt(7) -indicates the RAIO mode is bt
8. servicePortUserLabel(8) -indicates the RAIO mode is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode is dslForumDefault
10. brt(10) -indicates the RAIO mode is brt
11. userDefined(11) -indicates the RAIO mode is user defined
12. ft(12) -indicates the RAIO mode is ft
13. cntelXpon(13) -indicates the RAIO mode is Xpon add BRAS
14. tm(14) -indicates the RAIO mode is tm
15. bbf(15) -indicates the RAIO mode is bbf
16. vnpt(16) -indicates the RAIO mode is vnpt
Default: common(1)
Restrictions:
bt(7) is not supported.
The VBAS supports only common(1), cntel(3), and userDefined(11). Enumeration .1.3.6.1.4.1.2011.6.42.10.1.3 |
hwDslamRAIOIfTypeIndicates the interface type.
Options:
1. atm(1) -atm interface type
2. eth(2) -eth interface type
3. xpon(3) -xpon interface type
4. eoc(4) -eoc interface type
5. docsis(5) -docsis interface type
For the ATM access mode (the ATM mode of xDSL boards),
the value of this leaf is atm(1); for the Ethernet access mode
(the PTM mode of the OPFA board and xDSL boards), the value of
this leaf is eth(2); for the xPON access mode, the value of this leaf is xpon(3);
for the EOC access mode, the value of this leaf is eoc(4);
for the docsis access mode, the value of this leaf is docsis(5). Enumeration .1.3.6.1.4.1.2011.6.42.10.1.4 |
hwDslamRAIOFormatStringIndicates the character string of the RAIO format.
Range: a string of 0-255 characters.rw OCTET STRING .1.3.6.1.4.1.2011.6.42.10.1.5 |
hwDslamRAIORowStatusIndicates the row status, used for deleting the RAIO format.
Options createAndGo(4) and destroy(6) are supported. Currently,
this leaf does not support the create and query operations.
To modify the RAIO format, you need not bind the row status.
To delete the RAIO format, you must input hwDslamRAIORowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.42.10.1.6 |
hwDslamPITPPmodePortPvcTablePITP pmode of pvc supported port management table.
The indexes of this table are ifIndex, hwAdsllinePvcVpi and hwAdslLinePvcVci. SEQUENCE OF HwDslamPITPPmodePortPvcEntry .1.3.6.1.4.1.2011.6.42.11 |
hwDslamPITPPmodePortPvcEntryPITP pmode of pvc supported port management table.
The indexes of this entry are ifIndex, hwAdsllinePvcVpi and hwAdslLinePvcVci. HwDslamPITPPmodePortPvcEntry .1.3.6.1.4.1.2011.6.42.11.1 |
hwDslamPITPPmodePortPvcAdminStatusPITP pmode of pvc supported port administer state.
Options: true(enable), false(disable),the default
Default: falserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.42.11.1.1 |
hwDslamPITPPmodePortPvcRowStatusRow status.
Add or delete a table item.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.42.11.1.2 |
hwDslamPITPPmodePortTablePITP pmode of port management table.
The index of this table is ifIndex. SEQUENCE OF HwDslamPITPPmodePortEntry .1.3.6.1.4.1.2011.6.42.12 |
hwDslamPITPPmodePortEntryPITP pmode of port management table.
The index of this entry is ifIndex. HwDslamPITPPmodePortEntry .1.3.6.1.4.1.2011.6.42.12.1 |
hwDslamPITPPmodePortAdminStatusPITP pmode of port administer state.
Options: true(enable), false(disable)
Default: falserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.42.12.1.1 |
hwDslamPITPPmodePortUplinkStatusUp-link administer state. Only a port on main board can be an up-link.
Options: true(yes), false(no),
Default: truerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.42.12.1.2 |
hwDslamPITPPmodePortRowStatusRow status.
Add or delete a table item.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.42.12.1.3 |
hwDslamPITPPmodeSuboption90StatusIndicates PPPoE plus Suboption90.
Options:
1. true(1) -indicates PPPoE plus Suboption90 is enable
2. false(2) -indicates PPPoE plus Suboption90 is disable
Default: false(2)
Restrictions:
The operation on this leaf takes effect in the PPPoE plus mode only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.42.13 |
hwDslamPITPPmodeSuboptionTablePITP pmode suboption table.
The index of this table is hwDslamPITPPmodeSuboptionIndex. SEQUENCE OF HwDslamPITPPmodeSuboptionEntry .1.3.6.1.4.1.2011.6.42.14 |
hwDslamPITPPmodeSuboptionEntryPITP pmode suboption table.
The index of this entry is hwDslamPITPPmodeSuboptionIndex. HwDslamPITPPmodeSuboptionEntry .1.3.6.1.4.1.2011.6.42.14.1 |
hwDslamPITPPmodeSuboptionIndexthe index of PITP pmode suboption:
-index 1 stand for suboption 0x81;
-index 2 stand for suboption 0x82;
-index 3 stand for suboption 0x83;
-index 4 stand for suboption 0x84;
-index 5 stand for suboption 0x85;
-index 6 stand for suboption 0x86;
-index 7 stand for suboption 0x87;
-index 8 stand for suboption 0x88;
-index 9 stand for suboption 0x89;
-index 10 stand for suboption 0x8a;
-index 11 stand for suboption 0x8b;
-index 12 stand for suboption 0x8c;
-index 13 stand for suboption 0x8d;
-index 14 stand for suboption 0x8e;
-index 15 stand for suboption 0x90;
DEFVAL { 1 }ro Integer32 .1.3.6.1.4.1.2011.6.42.14.1.1 |
hwDslamPITPPmodeSuboptionStatusConfiguration of PITP pmode suboption.
Options: true(enable), false(disable)
Default: falserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.42.14.1.2 |
hwDslamRaioSuboptionTableUsed for setting and querying RAIO suboptions.
The indexes of this table are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. SEQUENCE OF HwDslamRaioSuboptionEntry .1.3.6.1.4.1.2011.6.42.15 |
hwDslamRaioSuboptionEntryUsed for setting and querying RAIO suboptions.
The indexes of this entry are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. HwDslamRaioSuboptionEntry .1.3.6.1.4.1.2011.6.42.15.1 |
hwDslamRaioProtocolTypeIndexIndicates the protocol type supporting RAIO suboptions. This leaf is an index.
Range: 1-255
The value 1 indicates DHCP Option82, 2 indicates PPPoE plus, and 3-255 are reserved. Integer32 .1.3.6.1.4.1.2011.6.42.15.1.1 |
hwDslamRaioSuboptionIndexIndicates the RAIO suboption. This leaf is an index.
Range: 1-255
1-17 correspond to suboptions 0x81-0x91. Integer32 .1.3.6.1.4.1.2011.6.42.15.1.2 |
hwDslamRaioSuboptionStatusIndicates the status of the RAIO suboption.
Options:
1. enable(1) -indicates the RAIO suboption is enable
2. disable(2) -indicates the RAIO suboption is disable
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.42.15.1.3 |
hwDslamAccessNodeIdIndicates the ANID.
Range: a string of 0-50 characters
Restrictions:
This leaf does not support the create operation, and supports only the modify and query operations.
To cancel the settings of the ANID, you can directly perform the set operation without inputting a leaf value.rw OCTET STRING .1.3.6.1.4.1.2011.6.42.16 |
hwDslamAccessNodeIpIndicates the L3 interface in the ANIP field. Currently, the device management IP address is used as the device identifier.
The value of the device management IP address is obtained through the VLAN L3 interface specified by hwDslamAccessNodeIp.
Range: 0-4294967295
Restrictions:
This leaf does not support the create operation, and supports only the modify and query operations.
To cancel the settings of the ANIP, input leaf value 4294967295 (equaling 0xFFFFFFFF) and perform the set operation.rw Integer32 .1.3.6.1.4.1.2011.6.42.17 |
hwDslamAncpRAIOModeRAIO(Relay agent info Option) mode of ANCP.
Options:
1. common(1) -indicates the RAIO mode of ANCP is common
2. xdslPortRate(2) -indicates the RAIO mode of ANCP is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of ANCP is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of ANCP is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of ANCP is neuf
6. portUserLabel(6) -indicates the RAIO mode of ANCP is portUserLabel
7. bt(7) -indicates the RAIO mode of ANCP is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of ANCP is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of ANCP is dslForumDefault
10. brt(10) -indicates the RAIO mode of ANCP is brt
11. userDefined(11) -indicates the RAIO mode of ANCP is user defined
12. ft(12) -indicates the RAIO mode of ANCP is ft
13. cntelXpon(13) -indicates the RAIO mode of ANCP is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of ANCP is tm
15. bbf(15) -indicates the RAIO mode of ANCP is bbf
16. vnpt(16) -indicates the RAIO mode of ANCP is vnpt
Default: dslForumDefault(9)rw Enumeration .1.3.6.1.4.1.2011.6.42.18 |
hwDslamDHCPv6OPTIONRAIOModeIndicates the RAIO mode of DHCPv6 Option.
Options:
1. common(1) -indicates the RAIO mode of DHCPv6 option is common
2. xdslPortRate(2) -indicates the RAIO mode of DHCPv6 option is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of DHCPv6 option is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of DHCPv6 option is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of DHCPv6 option is neuf
6. portUserLabel(6) -indicates the RAIO mode of DHCPv6 option is portUserLabel
7. bt(7) -indicates the RAIO mode of DHCPv6 option is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of DHCPv6 option is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of DHCPv6 option is dslForumDefault
10. brt(10) -indicates the RAIO mode of DHCPv6 option is brt
11. userDefined(11) -indicates the RAIO mode of DHCPv6 option is user defined
12. ft(12) -indicates the RAIO mode of DHCPv6 option is ft
13. cntelXpon(13) -indicates the RAIO mode of DHCPv6 option is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of DHCPv6 option is tm
15. bbf(15) -indicates the RAIO mode of DHCPv6 option is bbf
16. vnpt(16) -indicates the RAIO mode of DHCPv6 option is vnpt
Default: common(1)
Restrictions:
bt(7) is not supported.
When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable.rw Enumeration .1.3.6.1.4.1.2011.6.42.19 |
hwDslamRAIODhcpv6Option37EnterpriseNumberIndicates the enterprise number which is used in DHCPv6 option 37.
Range: 0-4294967295
DEFVAL {2011}rw Unsigned32 .1.3.6.1.4.1.2011.6.42.20 |
hwDslamRaioProfileTableUsed for creating, setting and querying RAIO profiles.
The index of this table is hwDslamRaioProfileName. SEQUENCE OF HwDslamRaioProfileEntry .1.3.6.1.4.1.2011.6.42.21 |
hwDslamRaioProfileEntryUsed for creating, setting and querying RAIO profiles.
The index of this entry is hwDslamRaioProfileName. HwDslamRaioProfileEntry .1.3.6.1.4.1.2011.6.42.21.1 |
hwDslamRaioProfileNameRAIO profile name.
Range: a string of 1-32 characters OCTET STRING .1.3.6.1.4.1.2011.6.42.21.1.1 |
hwDslamRaioProfileAccessNodeIpIfTypeIndicates the interface type.
Options:
1. notConfiged(1) -indicates that no source interface is configured
2. meth(2) -indicates the MEth interface
3. loopback(3) -indicates the loopback interface
4. vlanif(4) -indicates the VLAN interface
When this leaf is set to notConfiged(1), it means that no source
interface is configured in the case of the create operation, and
that the source interface is deleted in the case of the modify operation.rw Enumeration .1.3.6.1.4.1.2011.6.42.21.1.2 |
hwDslamRaioProfileAccessNodeIpIfNumberIndicates the interface ID.
Range: 0-4093
Range for the MEth interface: 0
Range for the loopback interface: 0-31
Range for the VLAN interface: 1-4093
The interface ID and interface type together identify an interface.rw Integer32 .1.3.6.1.4.1.2011.6.42.21.1.3 |
hwDslamRaioProfilePitpRaioModeIndicates the RAIO mode. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf
6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel
7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of PPPoE plus/VBAS is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of PPPoE plus/VBAS is dslForumDefault
10. brt(10) -indicates the RAIO mode of PPPoE plus/VBAS is brt
11. userDefined(11) -indicates the RAIO mode of PPPoE plus/VBAS is user defined
12. ft(12) -indicates the RAIO mode of PPPoE plus/VBAS is ft
13. cntelXpon(13) -indicates the RAIO mode of PPPoE plus/VBAS is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of PPPoE plus/VBAS is tm
15. bbf(15) -indicates the RAIO mode of PPPoE plus/VBAS is bbf
16. vnpt(16) -indicates the RAIO mode of PPPoE plus/VBAS is vnpt
Default: common(1)
Restrictions:
bt(7) is not supported.
The VBAS supports only common(1), cntel(3), and userDefined(11).rw Enumeration .1.3.6.1.4.1.2011.6.42.21.1.4 |
hwDslamRaioProfileDhcpOption82RaioModeIndicates the RAIO mode. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode of DHCP Option82 is common
2. xdslPortRate(2) -indicates the RAIO mode of DHCP Option82 is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of DHCP Option82 is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of DHCP Option82 is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of DHCP Option82 is neuf
6. portUserLabel(6) -indicates the RAIO mode of DHCP Option82 is portUserLabel
7. bt(7) -indicates the RAIO mode of DHCP Option82 is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of DHCP Option82 is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of DHCP Option82 is dslForumDefault
10. brt(10) -indicates the RAIO mode of DHCP Option82 is brt
11. userDefined(11) -indicates the RAIO mode of DHCP Option82 is user defined
12. ft(12) -indicates the RAIO mode of DHCP Option82 is ft
13. cntelXpon(13) -indicates the RAIO mode of DHCP Option82 is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of DHCP Option82 is tm
15. bbf(15) -indicates the RAIO mode of DHCP Option82 is bbf
16. vnpt(16) -indicates the RAIO mode of DHCP Option82 is vnpt
Default: common(1)
Restrictions:
bt(7) is not supported.rw Enumeration .1.3.6.1.4.1.2011.6.42.21.1.5 |
hwDslamRaioProfileAncpRaioModeIndicates the RAIO mode. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode of ANCP is common
2. xdslPortRate(2) -indicates the RAIO mode of ANCP is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of ANCP is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of ANCP is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of ANCP is neuf
6. portUserLabel(6) -indicates the RAIO mode of ANCP is portUserLabel
7. bt(7) -indicates the RAIO mode of ANCP is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of ANCP is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of ANCP is dslForumDefault
10. brt(10) -indicates the RAIO mode of ANCP is brt
11. userDefined(11) -indicates the RAIO mode of ANCP is user defined
12. ft(12) -indicates the RAIO mode of ANCP is ft
13. cntelXpon(13) -indicates the RAIO mode of ANCP is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of ANCP is tm
15. bbf(15) -indicates the RAIO mode of ANCP is bbf
16. vnpt(16) -indicates the RAIO mode of ANCP is vnpt
Default: dslForumDefault(9)
Restrictions:
bt(7) is not supported.rw Enumeration .1.3.6.1.4.1.2011.6.42.21.1.6 |
hwDslamRaioProfileDhcpv6OptionRaioModeIndicates the RAIO mode. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode of DHCPv6 is common
2. xdslPortRate(2) -indicates the RAIO mode of DHCPv6 is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of DHCPv6 is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of DHCPv6 is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of DHCPv6 is neuf
6. portUserLabel(6) -indicates the RAIO mode of DHCPv6 is portUserLabel
7. bt(7) -indicates the RAIO mode of DHCPv6 is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of DHCPv6 is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of DHCPv6 is dslForumDefault
10. brt(10) -indicates the RAIO mode of DHCPv6 is brt
11. userDefined(11) -indicates the RAIO mode of DHCPv6 is user defined
12. ft(12) -indicates the RAIO mode of DHCPv6 is ft
13. cntelXpon(13) -indicates the RAIO mode of DHCPv6 is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of DHCPv6 is tm
15. bbf(15) -indicates the RAIO mode of DHCPv6 is bbf
16. vnpt(16) -indicates the RAIO mode of DHCPv6 is vnpt
Default: common(1)
Restrictions:
bt(7) is not supported.rw Enumeration .1.3.6.1.4.1.2011.6.42.21.1.7 |
hwDslamRaioProfileDhcpv6Option37EnterpriseNumberIndicates the enterprise number which is used in DHCPv6 option 37.
Range: 0-4294967295rw Unsigned32 .1.3.6.1.4.1.2011.6.42.21.1.8 |
hwDslamRaioProfileAccessNodeIdIndicates the ANID.
Range: a string of 0-50 characters
Restrictions:rw OCTET STRING .1.3.6.1.4.1.2011.6.42.21.1.9 |
hwDslamRaioProfileRowStatusIndicates the row status, used for creating and deleting the RAIO profile.
Options createAndGo(4) and destroy(6) are supported. Currently,
to modify the RAIO profile, you need not bind the row status.
To delete the RAIO profile, you must input hwDslamRaioProfileRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.42.21.1.10 |
hwDslamRaioProfileSuboptionTableUsed for setting and querying the RAIO suboption state of the RAIO profile.
The indexes of this table are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex
and hwDslamRaioSuboptionIndex. SEQUENCE OF HwDslamRaioProfileSuboptionEntry .1.3.6.1.4.1.2011.6.42.22 |
hwDslamRaioProfileSuboptionEntryUsed for setting and querying the RAIO suboption state of the RAIO profile.
The indexes of this entry are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex
and hwDslamRaioSuboptionIndex. HwDslamRaioProfileSuboptionEntry .1.3.6.1.4.1.2011.6.42.22.1 |
hwDslamRaioProfileSuboptionStatusIndicates the status of the RAIO suboption.
Options:
1. enable(1) -indicates the RAIO suboption is enable
2. disable(2) -indicates the RAIO suboption is disable
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.42.22.1.1 |
hwDslamRaioProfileFormatTableUsed for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode.
The indexes of this table are hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara,
hwDslamRAIOMode, and hwDslamRAIOIfType. SEQUENCE OF HwDslamRaioProfileFormatEntry .1.3.6.1.4.1.2011.6.42.23 |
hwDslamRaioProfileFormatEntryUsed for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode.
The indexes of this entry are hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara,
hwDslamRAIOMode, and hwDslamRAIOIfType. HwDslamRaioProfileFormatEntry .1.3.6.1.4.1.2011.6.42.23.1 |
hwDslamRaioProfileFormatStringIndicates the character string of the RAIO format.
Range: a string of 0-255 characters.rw OCTET STRING .1.3.6.1.4.1.2011.6.42.23.1.1 |
hwDslamPppoeFlowStatisticsTableUsed for querying and resetting the pppoeplus statistics on flow.
The index of this table is hwDslamPppoeFlowStatisticsIndex.
Statistics for a maximum of 64 service ports are supported. SEQUENCE OF HwDslamPppoeFlowStatisticsEntry .1.3.6.1.4.1.2011.6.42.24 |
hwDslamPppoeFlowStatisticsEntryUsed for querying and resetting the pppoeplus statistics on flow.
The index of this entry is hwDslamPppoeFlowStatisticsIndex.
Statistics for a maximum of 64 service ports are supported. HwDslamPppoeFlowStatisticsEntry .1.3.6.1.4.1.2011.6.42.24.1 |
hwDslamPppoeFlowStatisticsIndexThe index of the PPPoE statistics on flow. Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.1 |
hwDslamPppoeFlowStatisticsRowStatusThe present operation status of the row.
CreateAndGo(4) means enable the PPPoE statistics on flow.
Destroy(6) means disable the PPPoE statistics on flow.
Active(1) will be returned in the get operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.42.24.1.2 |
hwDslamPppoeFlowStatisticsOperModeIndicates reset the PPPoE statistics on flow.
Options:
1. reset(1) -In the set operation, reset the PPPoE statistics on flow.
2. invalid(2) -In the get operation, the invalid value 2 is returned.
Default: invalid(2)rw Enumeration .1.3.6.1.4.1.2011.6.42.24.1.3 |
hwDslamPppoeFlowStatisticsReceivePadiNumber of received PADI packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.4 |
hwDslamPppoeFlowStatisticsReceivePadoNumber of received PADO packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.5 |
hwDslamPppoeFlowStatisticsReceivePadrNumber of received PADR packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.6 |
hwDslamPppoeFlowStatisticsReceivePadsNumber of received PADS packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.7 |
hwDslamPppoeFlowStatisticsReceivePadtNumber of received PADT packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.8 |
hwDslamPppoeFlowStatisticsSendPadiNumber of sent PADI packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.9 |
hwDslamPppoeFlowStatisticsSendPadoNumber of sent PADO packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.10 |
hwDslamPppoeFlowStatisticsSendPadrNumber of sent PADR packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.11 |
hwDslamPppoeFlowStatisticsSendPadsNumber of sent PADS packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.12 |
hwDslamPppoeFlowStatisticsSendPadtNumber of sent PADT packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.13 |
hwDslamPppoeFlowStatisticsTagTooLongNumber of packets exceed the maximum tag size.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.14 |
hwDslamPppoeFlowStatisticsFrameTooLongNumber of packets exceed the maximum packet size.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.15 |
hwDslamPppoeFlowStatisticsReceiveUntrustedNumber of received packets with untrusted tag.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.16 |
hwDslamPppoeFlowStatisticsReceiveUnknownTypeNumber of received packets with unknown type.ro Unsigned32 .1.3.6.1.4.1.2011.6.42.24.1.17 |
hwDslamPppoeReverseIndicates the status of the global reverse PPPoE packets switch.
Options:
1. enable(1) -indicates the reverse PPPoE packets are forwarded
2. disable(2) -indicates the reverse PPPoE packets are dropped
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.42.25 |