HUAWEI-ATM-OAM-MIB
AI MIB Summary
The HUAWEI-ATM-OAM-MIB module enables the monitoring and management of Operations, Administration, and Maintenance (OAM) functions on Huawei ATM network interfaces, specifically tracking OAM session states, loopback test results, and continuity check parameters to verify link integrity and performance.
huawei hwAtmOam mib.
Main OID:
hwAtmOam.1.3.6.1.4.1.2011.6.11
60
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
60 total| Object Name |
|---|
hwAtmOamhuawei hwAtmOam mib. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.11 |
IF-MIBhuawei hwAtmOam mib. Unknown .1.3.6.1.4.1.2011.6.11 |
hwAtmOamMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.11.1 |
hwAtmOamPointTableTable of OAM point.
functions Decripted as: SEQUENCE OF HwAtmOamPointEntry .1.3.6.1.4.1.2011.6.11.1.1 |
hwAtmOamPointEntryOAM point table entry. HwAtmOamPointEntry .1.3.6.1.4.1.2011.6.11.1.1.1 |
hwAtmOamPointVPIvpi.ro AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.6.11.1.1.1.1 |
hwAtmOamPointVCIvci.
if vci = 0, means that this is a F4 pointro AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.6.11.1.1.1.2 |
hwAtmOamPointTypeOAM point type.
e2e(1) : e-t-e end point.
segment(2) : segment end point.
e2e-inter(3) : connection point within two e-t-e points.
segment-inter(4): connection point within two segment points.rw Enumeration .1.3.6.1.4.1.2011.6.11.1.1.1.3 |
hwAtmOamPointAdminStatusup(1) means enable; down(2) means disable.rw Enumeration .1.3.6.1.4.1.2011.6.11.1.1.1.4 |
hwAtmOamAlarmTypeOAM point alarm type.
noAlarm(0) : no alarm.
receiveAisCell(0x01): received AIS cell.
receiveRdiCell(0x02): received RDI cell.
loc(0x04) : lost of continuty(CC failed).
f4Ais(0x08) : F4 layer AIS alarm. only for F5 point.
portAlarm(0x10) : F1~F3 layer alarm.
All Alarms can happen at same time which dispayed as the relate bitro Enumeration .1.3.6.1.4.1.2011.6.11.1.1.1.5 |
hwAtmOamCfgFlagOAM point configure recovering flag.
running(1) : OAM point in running stage.
recovering(2): OAM point in recovering stage.ro Enumeration .1.3.6.1.4.1.2011.6.11.1.1.1.6 |
hwAtmOamFmStatusOAM point FM status.ro Enumeration .1.3.6.1.4.1.2011.6.11.1.1.1.7 |
hwAtmOamFmStatusDateTimeThe time that the OAM point entered this FM status.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.11.1.1.1.8 |
hwAtmOamPointRowStatusOAM point table row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.11.1.1.1.9 |
hwAtmOamCcTableTable of CC end point.
see the define of the OAM point table . SEQUENCE OF HwAtmOamCcEntry .1.3.6.1.4.1.2011.6.11.1.2 |
hwAtmOamCcEntryOAM CC end point table entry. HwAtmOamCcEntry .1.3.6.1.4.1.2011.6.11.1.2.1 |
hwAtmOamCcVPIvpi. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.6.11.1.2.1.1 |
hwAtmOamCcVCIvci.
if vci = 0, means that this is a F4 point AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.6.11.1.2.1.2 |
hwAtmOamCcDirectionOAM CC direction.rw Enumeration .1.3.6.1.4.1.2011.6.11.1.2.1.3 |
hwAtmOamConfTypeOAM CC configure type,only valid up or down operating .
autoConfig(1) : active/deactive CC by A/D protocol.
manualConfig(2): active/deactive CC by TMN entirely. see I.610rw Enumeration .1.3.6.1.4.1.2011.6.11.1.2.1.4 |
hwAtmOamCcAdminStatusup(1) means enable; down(2) means disable.rw Enumeration .1.3.6.1.4.1.2011.6.11.1.2.1.5 |
hwAtmOamCcRowStatusOAM CC end point table row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.11.1.2.1.6 |
hwAtmOamLbTableTable of loopback. SEQUENCE OF HwAtmOamLbEntry .1.3.6.1.4.1.2011.6.11.1.3 |
hwAtmOamLbEntryOAM loopback table entry.
This talbe only support 'set' operation. HwAtmOamLbEntry .1.3.6.1.4.1.2011.6.11.1.3.1 |
hwAtmOamLbVPIvpi.ro AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.6.11.1.3.1.1 |
hwAtmOamLbVCIvci.
if vci = 0, means that this is a F4 point.ro AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.6.11.1.3.1.2 |
hwAtmOamLbTypeOAM loopback type.
e2e(1) : end to end loopback.
segment(2) : segment loopback.
llid(3) : specified llid loopback.
no-loopback(4): stopping loopback.rw Enumeration .1.3.6.1.4.1.2011.6.11.1.3.1.3 |
hwAtmOamLbPointLLIDSpecify loopback destination LLID, which valid only hwAtmOamLbType being set llid(3) .rw OCTET STRING .1.3.6.1.4.1.2011.6.11.1.3.1.4 |
hwAtmOamLbNumberSpecify the number of the cells loopbacked .rw INTEGER .1.3.6.1.4.1.2011.6.11.1.3.1.5 |
hwAtmOamLbIntervalSpecify the interval between two insert operation.rw INTEGER .1.3.6.1.4.1.2011.6.11.1.3.1.6 |
hwAtmOamLlidTableTable of LLID. SEQUENCE OF HwAtmOamLlidEntry .1.3.6.1.4.1.2011.6.11.1.4 |
hwAtmOamLlidEntryOAM LLID table entry. HwAtmOamLlidEntry .1.3.6.1.4.1.2011.6.11.1.4.1 |
hwAtmOamLlidPointLLIDlocal interface LLID.rw OCTET STRING .1.3.6.1.4.1.2011.6.11.1.4.1.1 |
hwAtmOamInsertTableTable of Insert. SEQUENCE OF HwAtmOamInsertEntry .1.3.6.1.4.1.2011.6.11.1.5 |
hwAtmOamInsertEntryOAM Insert table entry.
This talbe only support 'set' operation. HwAtmOamInsertEntry .1.3.6.1.4.1.2011.6.11.1.5.1 |
hwAtmOamInsertVPIvpi. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.6.11.1.5.1.1 |
hwAtmOamInsertVCIvci.
if vci = 0, means that this is a F4 point. AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.6.11.1.5.1.2 |
hwAtmOamInsertOperationspecify the operation(begin or stop) of the insertion .rw Enumeration .1.3.6.1.4.1.2011.6.11.1.5.1.3 |
hwAtmOamInsertSegmentspecify the segment type.rw Enumeration .1.3.6.1.4.1.2011.6.11.1.5.1.4 |
hwAtmOamInsertCellTypespecify the type of the inserted cell .rw Enumeration .1.3.6.1.4.1.2011.6.11.1.5.1.5 |
hwAtmOamTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.11.2 |
hwAtmOamTrapVarBindOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.11.2.1 |
hwAtmOamGeneralVarBindOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.11.2.1.1 |
hwAtmOamVarBindLoopbackResultLoopback result:
success(1)
timeout(2)ro Enumeration .1.3.6.1.4.1.2011.6.11.2.1.1.1 |
hwAtmOamVarBindOidsReason OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.11.2.1.2 |
hwAtmOamAisReasonOAM operation terminate reason:
enumFirst:
explain ATM connection be deleted
resolving method:None
enumSecond:
explain Board fail
resolving method:None
OAMֹԭ
enumFirst:
澯ԭ ATMӱɾ
:
enumSecond:
澯ԭ
:ro Enumeration .1.3.6.1.4.1.2011.6.11.2.1.2.1 |
hwAtmOamOperTerminateReasonOAM operation terminate reason:
enumFirst:
explain ATM connection be deleted
resolving method:None
enumSecond:
explain Board fail
resolving method:None
OAMֹԭ
enumFirst:
澯ԭ ATMӱɾ
:
enumSecond:
澯ԭ
:ro Enumeration .1.3.6.1.4.1.2011.6.11.2.1.2.2 |
hwAtmOamAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.11.2.2 |
hwAtmOamAlarmTrapsOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.11.2.2.0 |
hwAtmOamAlarmAisalarm description:AIS alarm
explain AIS cell recieved from upstream.
resolving method:Check if there is some defect in the upstream
澯AIS澯
澯ԭյεAISԪ
飺Ƿ NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.11.2.2.0.1 |
hwAtmOamAlarmAisRestorealarm description:AIS alarmrestore
explain There is no AIS cell recieved from upstream within a time interval of 2.5 seconds, with a margin of 0.5 seconds,
resolving method:NA.
澯AIS澯ָ
澯ԭAIS״̬£2.5루+/- 0.5룩ʱûյAISԪ
飺 NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.11.2.2.0.2 |
hwAtmOamAlarmRdialarm description:RDI alarm
explain RDI cell recieved from downstream.
resolving method:Check if there is some defect in the downstream.
澯RDI澯
澯ԭյεRDIԪ
飺Ƿ NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.11.2.2.0.3 |
hwAtmOamAlarmRdiRestorealarm description:RDI alarmrestore
explain There is no RDI cell recieved from downstream within a time interval of 2.5 seconds, with a margin of 0.5 seconds,
resolving method:NA.
澯RDI澯ָ
澯ԭRDI״̬£2.5루+/- 0.5룩ʱûյRDIԪ
飺 NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.11.2.2.0.4 |
hwAtmOamAlarmLocalarm description:LOC alarm
explain CC sink can not recieve CC cells from source within a time interval of 3.5 seconds,with a margin of 0.5 seconds;Or physical fault is detected
resolving method:Check if there is some physical fault.check if there is some defect bettween CC source and CC sink.check if CC source is configured turely.
澯LOC澯
澯ԭԼָܱĽյղCCԪ3.5루+/- 0.5)յϸ澯
飺鱾ǷϣCCԶ֮ͨ·Ƿ϶ǶԶCCûȷ NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.11.2.2.0.5 |
hwAtmOamAlarmLocRestorealarm description:LOC alarm restore
explain CC cells can be recieved from CC source.Or physical fault is restored.
resolving method:NA
澯LOC澯ָ
澯ԭLOC״̬£յCCԪϻָ
飺 NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.11.2.2.0.6 |
hwAtmOamAlarmLbTerminatealarm description:LB abort alarm
explain1.The corresponding connection is deleted
2.There is some fault in the corresponding board.
resolving method:Until the board changes normal, and renew configureing if necesssary
澯LBֹ澯
澯ԭ1.ӦѾɾ
2.ڵĵ巢
飺ȴָҪ½лز NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.11.2.2.0.7 |
hwAtmOamAlarmInsTerminatealarm description:Insertion abort alarm
explain1.The corresponding connection is deleted
2.There is some fault in the corresponding board.
resolving method:Until the board changes normal, and renew configureing if necesssary
澯ֹ澯
澯ԭ1.ӦѾɾ
2.ڵĵ巢
飺ȴָҪ½в NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.11.2.2.0.8 |
hwAtmOamGeneralTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.11.2.3 |
hwAtmOamGeneralTrapsOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.11.2.3.0 |
hwAtmOamTrapLoopbackReportGeneral trap description:
Used to send loopback result of LB cell, success(1) or timeout(2).
һTRAP :
ڷͻԪĻؽɹ(1)ʱ(2) NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.11.2.3.0.1 |