HUAWEI-ATM-MIB
AI MIB Summary
The HUAWEI-ATM-MIB module manages Huawei ATM interfaces (OC-3/STM-1, OC-12/STM-4) by configuring IPoA, IPoEoA, and PVC services while monitoring OAM F5 loopback states, VP limits, and VPI mapping parameters.
This MIB is mainly used to configure the ATM OC-3/STM-1 and ATM OC-12/STM-4 interface, IPoA, IPoEoA, PVC service type, OAM F5 loopback, parameters of the VP limit, and mapping between the peer VPI and the local VPI.
Main OID:
hwAtmMIB.1.3.6.1.4.1.2011.5.25.156
83
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
hwAtmMIBThis MIB is mainly used to configure the ATM OC-3/STM-1 and ATM OC-12/STM-4 interface, IPoA, IPoEoA, PVC service type, OAM F5 loopback, parameters of the VP limit, and mapping between the peer VPI and the local VPI. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.156 |
hwAtmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.156.1 |
hwAtmTableThis table is used to configure the parameters of the ATM interface. SEQUENCE OF HwAtmEntry .1.3.6.1.4.1.2011.5.25.156.1.1 |
hwAtmEntryThis table is used to configure the parameters of the ATM interface. HwAtmEntry .1.3.6.1.4.1.2011.5.25.156.1.1.1 |
hwAtmIfIndexIndicates the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.156.1.1.1.1 |
hwAtmIfTypeIndicates the interface type.ro Enumeration .1.3.6.1.4.1.2011.5.25.156.1.1.1.11 |
hwAtmClockMaster clock: uses the internal clock signal.
Slave clock: uses the line clock signal.rw Enumeration .1.3.6.1.4.1.2011.5.25.156.1.1.1.12 |
hwAtmFrameFormatFor the optical interface STM-1/STM-4, the frame format on the ATM interface
is SDH; for the OC-3/OC-12 interface, the frame format is SONET.
The default frame format is SDH.rw Enumeration .1.3.6.1.4.1.2011.5.25.156.1.1.1.13 |
hwAtmScrambleBy default, the scramble function is enabled. The scramble function
takes effect only on payload rather than cell header.
true: enables the scramble function. false: disables the scramble function.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.1.1.14 |
hwAtmLoopbackEnable the loopback function of the channel.
local: enables the local loopback on the interface.
remote: enables the remote loopback on the interface.
payload: enables the remote payload loopback on the interface.
By default, all loopback functions are disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.156.1.1.1.15 |
hwAtmMapPvpTableThis table is used to configure the mapping between the peer VPI and the local VPI. SEQUENCE OF HwAtmMapPvpEntry .1.3.6.1.4.1.2011.5.25.156.1.2 |
hwAtmMapPvpEntryThis table is used to configure the mapping between the peer VPI and the local VPI. HwAtmMapPvpEntry .1.3.6.1.4.1.2011.5.25.156.1.2.1 |
hwAtmMapPvpIfIndexIndicates the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.156.1.2.1.1 |
hwAtmMapPvpVplVpiIndicates the local VPI value. The value is an integer ranging from 0 to 255. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.5.25.156.1.2.1.2 |
hwAtmMapPvpRemoteVplVpiIndicates the peer VPI value. The value is an integer ranging from 0 to 255.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.5.25.156.1.2.1.11 |
hwAtmMapPvpRowStatusThis variable is used to create or delete an object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.2.1.51 |
hwAtmMapPvcTableThis table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI. SEQUENCE OF HwAtmMapPvcEntry .1.3.6.1.4.1.2011.5.25.156.1.3 |
hwAtmMapPvcEntryThis table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI. HwAtmMapPvcEntry .1.3.6.1.4.1.2011.5.25.156.1.3.1 |
hwAtmMapPvcRemoteVclVciIndicates the peer VCI value. VCI is short for Virtual Channel Identifier.
The VCI value ranges from 0 to 2047. Generally, the values from 0 to 31 are reserved
for specail use.rw AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.5.25.156.1.3.1.11 |
hwAtmMapPvcRemoteVclVpiIndicates the peer VPI value. The value is an integer ranging from 0 to 255.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.5.25.156.1.3.1.12 |
hwAtmMapPvcRowStatusThis variable is used to create or delete an object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.3.1.51 |
hwAtmServiceTableThis table is used to configure the service type and related parameters for the PVC. SEQUENCE OF HwAtmServiceEntry .1.3.6.1.4.1.2011.5.25.156.1.4 |
hwAtmServiceEntryThis table is used to configure the service type for the PVC. HwAtmServiceEntry .1.3.6.1.4.1.2011.5.25.156.1.4.1 |
hwAtmServiceNameIndicates the name of the service type. The name is a string of 1 to 31 characters. OCTET STRING .1.3.6.1.4.1.2011.5.25.156.1.4.1.1 |
hwAtmServiceTypeSet the service type for the PVC as required.rw Enumeration .1.3.6.1.4.1.2011.5.25.156.1.4.1.11 |
hwAtmServiceOutputPcrIndicates the peak output rate of the ATM cell.
When hwPvcServiceTableType is ubr, the peak output rate is 0.rw Integer32 (0 | 64..149760) .1.3.6.1.4.1.2011.5.25.156.1.4.1.12 |
hwAtmServiceOutputScrIndicates the peak output rate of the ATM cell.
When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0.rw Integer32 (0 | 64..149760) .1.3.6.1.4.1.2011.5.25.156.1.4.1.13 |
hwAtmServiceOutputMbsIndicates the peak output rate of the ATM cell.
When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0.rw Integer32 (0 | 1..512) .1.3.6.1.4.1.2011.5.25.156.1.4.1.14 |
hwAtmServiceCbrCdvtValueIndicates the limit of the ATM cell delay variation. When hwPvcServiceTableType is cbr, the variable is valid.
For other service types, the variable is 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.156.1.4.1.15 |
hwAtmServiceOutputMcrIndicates the mini width guarantee bit rate of the ATM cell.
When hwPvcServiceTableType is ubr, the peak output rate is 0.rw Integer32 (0 | 64..149760) .1.3.6.1.4.1.2011.5.25.156.1.4.1.16 |
hwAtmServiceRowStatusThis variable is used to create or delete an object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.4.1.51 |
hwAtmPvcServiceTableThis table is used to configure the service type for the PVC. SEQUENCE OF HwAtmPvcServiceEntry .1.3.6.1.4.1.2011.5.25.156.1.5 |
hwAtmPvcServiceEntryThis table is used to configure the service type for the PVC. HwAtmPvcServiceEntry .1.3.6.1.4.1.2011.5.25.156.1.5.1 |
hwAtmPvcServiceNameIndicates the name of the service type. The name is a string of 1 to 31 characters.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.156.1.5.1.11 |
hwAtmPvcTransmittalDirectionIndicates the input or output tpye of the service type.rw Enumeration .1.3.6.1.4.1.2011.5.25.156.1.5.1.21 |
hwAtmPvcServiceRowStatusThis variable is used to create or delete an object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.5.1.51 |
hwAtmIfConfTableIndicates the configuration of the ATM interface. SEQUENCE OF HwAtmIfConfEntry .1.3.6.1.4.1.2011.5.25.156.1.11 |
hwAtmIfConfEntryIndicates the configuration of the ATM interface. HwAtmIfConfEntry .1.3.6.1.4.1.2011.5.25.156.1.11.1 |
hwAtmIfConfIfIndexIndicates the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.156.1.11.1.1 |
hwAtmIfConfMaxVccsIndicates the maximum number of the PVCs.rw Integer32 .1.3.6.1.4.1.2011.5.25.156.1.11.1.11 |
hwAtmIfConfOperVccsIndicates the number of the configured PVCs.ro Integer32 .1.3.6.1.4.1.2011.5.25.156.1.11.1.12 |
hwAtmIfConfIntfTypeThis object indicates the type of the serial interface with the ATM protocol.rw Enumeration .1.3.6.1.4.1.2011.5.25.156.1.11.1.13 |
hwAtmVplTableIndicates the configuration of the ATM PVP. SEQUENCE OF HwAtmVplEntry .1.3.6.1.4.1.2011.5.25.156.1.12 |
hwAtmVplEntryIndicates the configuration of the ATM PVP. HwAtmVplEntry .1.3.6.1.4.1.2011.5.25.156.1.12.1 |
hwAtmVplIfIndexIndicates the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.156.1.12.1.1 |
hwAtmVplVpiVPI. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.5.25.156.1.12.1.2 |
hwAtmVplRowStatusIndicates the status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.12.1.51 |
hwAtmVclTableIndicates the configuration of the ATM PVC. SEQUENCE OF HwAtmVclEntry .1.3.6.1.4.1.2011.5.25.156.1.13 |
hwAtmVclEntryIndicates the configuration of the ATM PVC. HwAtmVclEntry .1.3.6.1.4.1.2011.5.25.156.1.13.1 |
hwAtmVclIfIndexIndicates the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.156.1.13.1.1 |
hwAtmVclVpiVPI. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.5.25.156.1.13.1.2 |
hwAtmVclVciVCI. AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.5.25.156.1.13.1.3 |
hwAtmVclNameIndicates the name of the PVC.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.156.1.13.1.11 |
hwAtmVccAal5EncapsTypeIndicates the encapsulation mode of AAL5.rw Enumeration .1.3.6.1.4.1.2011.5.25.156.1.13.1.12 |
hwAtmVclRowStatusIndicates the status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.13.1.51 |
hwAtmPvcIpoaTableThis table is used to configure the IPoA mapping on the PVC. SEQUENCE OF HwAtmPvcIpoaEntry .1.3.6.1.4.1.2011.5.25.156.1.14 |
hwAtmPvcIpoaEntryThis table is used to configure the IPoA mapping on the PVC. HwAtmPvcIpoaEntry .1.3.6.1.4.1.2011.5.25.156.1.14.1 |
hwAtmPvcIpoaTypeIndicates the type of the PVC IPoA mapping.
ip: sets the peer IP address and mask that are mapped to the PVC.
default: configures a mapping with default route attributes. If no mapping of the next hop address
of a packet can be found, the packet is sent over the PVC if the PVC is configured with default mapping.
inarp: configures InARP on the PVC. Enumeration .1.3.6.1.4.1.2011.5.25.156.1.14.1.3 |
hwAtmPvcIpoaIpAddressIndicates the peer IP address mapped to the PVC. IpAddress .1.3.6.1.4.1.2011.5.25.156.1.14.1.4 |
hwAtmPvcIpoaIpMaskIndicates the IP address mask. The IP address mask is an optional parameter.rw IpAddress .1.3.6.1.4.1.2011.5.25.156.1.14.1.11 |
hwAtmPvcIpoaInarpIntervalIndicates the interval for sending InARP packets. The parameter is optional.
The value ranges from 1 to 600 in seconds. If the type of the PVC IPoA mapping is IP or default, the
value is 0. The default value is 1.rw Integer32 (0 | 1..600) .1.3.6.1.4.1.2011.5.25.156.1.14.1.12 |
hwAtmPvcIpoaBroadcastIf a mapping with this attribute is configured on the PVC, broadcast packets on the interface
where the PVC resides will be sent over the PVC.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.14.1.13 |
hwAtmPvcIpoaRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.14.1.51 |
hwAtmPvcBridgeTableThis table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC. SEQUENCE OF HwAtmPvcBridgeEntry .1.3.6.1.4.1.2011.5.25.156.1.15 |
hwAtmPvcBridgeEntryThis table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC. HwAtmPvcBridgeEntry .1.3.6.1.4.1.2011.5.25.156.1.15.1 |
hwAtmPvcBridgeDstIfIndexIndicates the index of the VE interface.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.156.1.15.1.11 |
hwAtmPvcBridgeRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.15.1.51 |
hwAtmPvcOamLoopbackTableThis table is used to configure OAM F5 Loopback, enable the sending of OAM F5 Loopback cells, and configure the parameters of the retransmission check or modify the parameters of the retransmission check. SEQUENCE OF HwAtmPvcOAMLoopbackEntry .1.3.6.1.4.1.2011.5.25.156.1.17 |
hwAtmPvcOAMLoopbackEntryThis table is used to configure OAM F5 Loopback. HwAtmPvcOAMLoopbackEntry .1.3.6.1.4.1.2011.5.25.156.1.17.1 |
hwAtmPvcOAMLoopbackFrequencyIndicates the interval for sending OAM F5 Loopback cells.rw Integer32 .1.3.6.1.4.1.2011.5.25.156.1.17.1.11 |
hwAtmPvcOAMLoopbackUpCountIndicates the number of continuous OAM F5 Loopback cells that must be received before the PVC turns Up.rw Integer32 .1.3.6.1.4.1.2011.5.25.156.1.17.1.12 |
hwAtmPvcOAMLoopbackDownCountIndicates the number of continuous OAM F5 Loopback cells that are not received before the PVC turns Down.rw Integer32 .1.3.6.1.4.1.2011.5.25.156.1.17.1.13 |
hwAtmPvcOAMLoopbackRetryFrequencyIndicates the interval for sending cells during OAM F5 Loopback retransmission verification before the PVC status changes.rw Integer32 .1.3.6.1.4.1.2011.5.25.156.1.17.1.14 |
hwAtmPvcOAMLoopbackRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.17.1.51 |
hwAtmPvpLimitTableThis table is used to configure the VP limit. To monitor the VP, configure related VP parameters. SEQUENCE OF HwAtmPvpLimitEntry .1.3.6.1.4.1.2011.5.25.156.1.18 |
hwAtmPvpLimitEntryThis table is used to configure the VP limit. HwAtmPvpLimitEntry .1.3.6.1.4.1.2011.5.25.156.1.18.1 |
hwAtmPvpLimitIfIndexIndicates the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.156.1.18.1.1 |
hwAtmPvpLimitVpiVPI. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2011.5.25.156.1.18.1.2 |
hwAtmPvpLimitPeakRateVCI.rw Integer32 .1.3.6.1.4.1.2011.5.25.156.1.18.1.11 |
hwAtmPvpLimitRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.156.1.18.1.51 |
hwAtmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.156.11 |
hwAtmCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.156.11.1 |
hwAtmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.156.11.2 |