HUAWEI-ADSLNNI-MIB
AI MIB Summary
The HUAWEI-ADSLNNI-MIB module enables the monitoring and management of Huawei ADSL Network-to-Network Interface (NNI) equipment, specifically tracking physical layer parameters, interface status, and traffic statistics for DSL aggregation links. It provides granular visibility into ADSL line performance metrics, including error counters, synchronization states, and data throughput, facilitating the diagnosis of connectivity issues and capacity planning within the access network.
This MIB is used for defining Huawei's ADSLNNI management MIB objects.
Main OID:
hwAdslnniMIB.1.3.6.1.4.1.2011.6.143
96
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
96 total| Object Name |
|---|
hwAdslnniMIBThis MIB is used for defining Huawei's ADSLNNI management MIB objects. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.143 |
hwAdslnni OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.143.1 |
hwAdslnniCfg OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.143.1.1 |
hwAdslnniPvcCfgTableTable hwAdslnniPvcCfgTable config the PVC of ADSLNNI is used to set and query the ADSL upstream VPI/VCI.
This table is used for the bonding group instead of the ADSL port.
Each bonding group corresponds to one PVC and the PVC takes effect only in the ATM bonding mode.
The index of this table is ifIndex. SEQUENCE OF HwAdslnniPvcCfgEntry .1.3.6.1.4.1.2011.6.143.1.1.1 |
hwAdslnniPvcCfgEntryTable hwAdslnniPvcCfgTable config the PVC of ADSLNNI is used to set and query the ADSL upstream VPI/VCI.
This table is used for the bonding group instead of the ADSL port.
Each bonding group corresponds to one PVC and the PVC takes effect only in the ATM bonding mode.
The index of this entry is ifIndex. HwAdslnniPvcCfgEntry .1.3.6.1.4.1.2011.6.143.1.1.1.1 |
hwAdslnniPvcVpiThe VPI of the adslnni port.rw Integer32 .1.3.6.1.4.1.2011.6.143.1.1.1.1.1 |
hwAdslnniPvcVciThe VCI of the adslnni port.rw Integer32 .1.3.6.1.4.1.2011.6.143.1.1.1.1.2 |
hwAdslnniInventoryTableThe table hwAdslnniInventoryTable contains inventory of the
ADSL2 units.
The indexes of this table are ifIndex and hwAdslnniLInvUnit. SEQUENCE OF HwAdslnniInventoryEntry .1.3.6.1.4.1.2011.6.143.1.1.2 |
hwAdslnniInventoryEntryThe table hwAdslnniInventoryTable contains inventory of the
ADSL2 units.
The indexes of this entry are ifIndex and hwAdslnniLInvUnit. HwAdslnniInventoryEntry .1.3.6.1.4.1.2011.6.143.1.1.2.1 |
hwAdslnniLInvUnitThe termination unit atuc(1) or atur(2). Adsl2Unit (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.2.1.1 |
hwAdslnniLInvG994VendorIdThe ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR
message. It consists of 8 binary octets, including a country
code followed by a (regionally allocated) provider code, as
defined in Recommendation T.35.ro OCTET STRING .1.3.6.1.4.1.2011.6.143.1.1.2.1.2 |
hwAdslnniLInvSystemVendorIdThe ATU System Vendor ID (identifies the ATU system
integrator) as inserted in the Overhead Messages (both ATUs
for G.992.3 and G.992.4) or in the Embedded Operations
Channel (only ATU-R in G.992.1 and G.992.2). It consists of
8 binary octets, with the same format as used for
Adsl2InvG994VendorId.ro OCTET STRING .1.3.6.1.4.1.2011.6.143.1.1.2.1.3 |
hwAdslnniLInvVersionNumberThe ATU version number (vendor-specific information) as
inserted in the Overhead Messages (both ATUs for G.992.3 and
G.992.4) or in the Embedded Operations Channel (only ATU-R in
G.992.1 and G.992.2). It consists of up to 16 binary octets.ro OCTET STRING .1.3.6.1.4.1.2011.6.143.1.1.2.1.4 |
hwAdslnniLInvSerialNumberThe ATU serial number (vendor-specific information) as
inserted in the Overhead Messages (both ATUs for G.992.3 and
G.992.4) or in the Embedded Operations Channel (only ATU-R in
G.992.1 and G.992.2). It is vendor-specific information. It
consists of up to 32 ASCII characters.ro OCTET STRING .1.3.6.1.4.1.2011.6.143.1.1.2.1.5 |
hwAdslnniLInvSelfTestResultThe ATU self-test result, coded as a 32-bit value. The
most significant octet of the result is '0' if the self-test
passed, and '1' if the self-test failed. The interpretation
of the other octets is vendor discretionary.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.1.2.1.6 |
hwAdslnniLInvTransmissionCapabilitiesThe ATU transmission system capability list of the different
coding types. It is coded in a bit-map representation with 1
or more bits set. A bit set to '1' means that the ATU
supports the respective coding. The value may be derived
from the handshaking procedures defined in G.994.1. A set
of ADSL2 line transmission modes, with one bit per mode.ro Adsl2TransmissionModeType (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.2.1.7 |
hwAdslnniLineTableThe table hwAdslnniLineTable contains configuration,
commands, and status parameters of the ADSL2 line.
The index of this table is an interface index where the
interface has an ifType of adslnni. SEQUENCE OF HwAdslnniLineEntry .1.3.6.1.4.1.2011.6.143.1.1.3 |
hwAdslnniLineEntryThe table hwAdslnniLineTable contains configuration,
commands, and status parameters of the ADSL2 line.
The index of this entry is an interface index where the
interface has an ifType of adslnni. HwAdslnniLineEntry .1.3.6.1.4.1.2011.6.143.1.1.3.1 |
hwAdslnniLineStatusAtuTransSysThe ATU Transmission System (ATS) in use.
It is coded in a bit-map representation with only a single bit
set to '1' (the selected coding for the ADSL line). This
parameter may be derived from the handshaking procedures
defined in Recommendation G.994.1. A set of ADSL2 line
transmission modes, with one bit per mode.ro Adsl2TransmissionModeType (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.3.1.1 |
hwAdslnniLineStatusPwrMngStateThe current power management state.
Options:
1. L0(1) - Synchronized and full transmission (i.e., Showtime).
2. L1(2) - Low Power with reduced net data rate (G.992.2 only).
3. L2(3) - Low Power with reduced net data rate (G.992.3 and
G.992.4 only).
4. L3(4) - No power.ro Adsl2PowerMngState (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.3.1.2 |
hwAdslnniLineStatusInitResultIndicates the result of the last full initialization performed
on the line.
Options:
1. noFail(0) -Indicates that no abnormity occurs.
2. configError(1) -Indicates that the configuration is incorrect.
3. configNotFeasible(2) -Indicates that the configuration is improper.
4. commFail(3) -Indicates that the communication fails.
5. noPeerAtu(4) -Indicates that the peer ATU does not exist.
6. otherCause(5) -Indicates that an unknown error occurs.ro Adsl2InitResult (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.3.1.3 |
hwAdslnniLineStatusLastStateDsThe last successful transmitted initialization state in
the downstream direction in the last full initialization
performed on the line.ro Adsl2LastTransmittedState (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.3.1.4 |
hwAdslnniLineStatusLastStateUsThe last successful transmitted initialization state in the
upstream direction in the last full initialization performed
on the line.ro Adsl2LastTransmittedState (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.3.1.5 |
hwAdslnniLineStatusAturIndicates current state (existing failures) of the ATU-R.
This is a bit-map of possible conditions.ro Adsl2LineStatus (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.3.1.6 |
hwAdslnniLineStatusAtucIndicates current state (existing failures) of the ATU-C.
This is a bit-map of possible conditions.ro Adsl2LineStatus (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.3.1.7 |
hwAdslnniLineStatusLnAttenDsThe measured difference in the total power transmitted by the
ATU-C and the total power received by the ATU-R over all sub-
carriers during diagnostics mode and initialization. It
ranges from 0 to 1270 units of 0.1 dB (physical values
are 0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is currently unavailable.ro Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.143.1.1.3.1.8 |
hwAdslnniLineStatusLnAttenUsThe measured difference in the total power transmitted by the
ATU-R and the total power received by the ATU-C over all sub-
carriers during diagnostics mode and initialization.
It ranges from 0 to 1270 units of 0.1 dB (physical values are
0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is currently unavailable.ro Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.143.1.1.3.1.9 |
hwAdslnniLineStatusSigAttenDsThe measured difference in the total power transmitted by the
ATU-C and the total power received by the ATU-R over all sub-
carriers during Showtime. It ranges from 0 to 1270 units of
0.1 dB (physical values are 0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the
signal attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
signal attenuation measurement is currently unavailable.ro Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.143.1.1.3.1.10 |
hwAdslnniLineStatusSigAttenUsThe measured difference in the total power transmitted by the
ATU-R and the total power received by the ATU-C over all sub-
carriers during Showtime. It ranges from 0 to 1270 units of
0.1 dB (physical values are 0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the
signal attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
signal attenuation measurement is currently unavailable.ro Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.143.1.1.3.1.11 |
hwAdslnniLineStatusSnrMarginDsDownstream SNR Margin is the maximum increase in dB of the
noise power received at the ATU-R, such that the BER
requirements are met for all downstream bearer channels. It
ranges from -640 to 630 units of 0.1 dB (physical values are
-64 to 63 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the
SNR Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
SNR Margin measurement is currently unavailable.ro Integer32 (-640..630 | 2147483646 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.143.1.1.3.1.12 |
hwAdslnniLineStatusSnrMarginUsUpstream SNR Margin is the maximum increase in dB of the noise
power received at the ATU-C, such that the BER requirements
are met for all downstream bearer channels. It ranges from
-640 to 630 units of 0.1 dB (physical values are -64 to
63 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the
SNR Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
SNR Margin measurement is currently unavailable.ro Integer32 (-640..630 | 2147483646 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.143.1.1.3.1.13 |
hwAdslnniLineStatusAttainableRateDsMaximum Attainable Data Rate Downstream.
The maximum downstream net data rate currently attainable by
the ATU-C transmitter and the ATU-R receiver, coded in
bits/second.ro Unsigned32 UNITS "bits/second" .1.3.6.1.4.1.2011.6.143.1.1.3.1.14 |
hwAdslnniLineStatusAttainableRateUsMaximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the
ATU-R transmitter and the ATU-C receiver, coded in
bits/second.ro Unsigned32 UNITS "bits/second" .1.3.6.1.4.1.2011.6.143.1.1.3.1.15 |
hwAdslnniLineStatusActPsdDsActual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB
(physical values are -90 to 0 dBm/Hz).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented.ro Integer32 (-900..0 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.143.1.1.3.1.16 |
hwAdslnniLineStatusActPsdUsActual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (physical values
are -90 to 0 dBm/Hz).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented.ro Integer32 (-900..0 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.143.1.1.3.1.17 |
hwAdslnniLineStatusActAtpDsActual Aggregate Transmit Power Downstream. The total amount
of transmit power delivered by the ATU-C at the U-C reference
point, at the instant of measurement. It ranges from -310 to
310 units of 0.1 dB (physical values are -31 to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented.ro Integer32 (-310..310 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.143.1.1.3.1.18 |
hwAdslnniLineStatusActAtpUsActual Aggregate Transmit Power Upstream. The total amount of
transmit power delivered by the ATU-R at the U-R
reference point, at the instant of measurement. It ranges
from -310 to 310 units of 0.1 dB (physical values are -31
to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented.ro Integer32 (-310..310 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.143.1.1.3.1.19 |
hwAdslnniChannelStatusTableThe table hwAdslnniChannelStatusTable contains status
parameters of the ADSL2 channel. This table contains live
data from equipment.
The indexes of this table are ifIndex and hwadslnniChStatusUnit. SEQUENCE OF HwAdslnniChannelStatusEntry .1.3.6.1.4.1.2011.6.143.1.1.4 |
hwAdslnniChannelStatusEntryThe table hwAdslnniChannelStatusTable contains status
parameters of the ADSL2 channel. This table contains live
data from equipment.
The indexes of this entry are ifIndex and hwadslnniChStatusUnit. HwAdslnniChannelStatusEntry .1.3.6.1.4.1.2011.6.143.1.1.4.1 |
hwadslnniChStatusUnitThe termination unit ATUC(1) or ATUR(2). Adsl2Unit (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.4.1.1 |
hwadslnniChStatusChannelNumProvides the bearer channel number associated with this
row (i.e., the channel ifIndex).
This enables determining the channel configuration profile
and the channel thresholds profile applicable for this
bearer channel.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.1.4.1.2 |
hwadslnniChStatusActDataRateThe actual net data rate that the bearer channel is operating
at, if in L0 power management state. In L1 or L2 states, it
relates to the previous L0 state. The data rate is coded in
bit/s.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.1.4.1.3 |
hwadslnniChStatusPrevDataRateThe previous net data rate that the bearer channel was
operating at just before the latest rate change event. This
could be a full or short initialization, fast retrain, DRA or
power management transitions, excluding transitions between L0
state and L1 or L2 states. The data rate is coded in bit/s.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.1.4.1.4 |
hwadslnniChStatusActDelayThe actual one-way interleaving delay introduced by the
PMS-TC in the direction of the bearer channel, if in L0
power management state. In L1 or L2 states, it relates to
the previous L0 state. It is coded in ms (rounded to the
nearest ms).ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.1.4.1.5 |
hwadslnniChStatusAtmStatusIndicates current state (existing failures) of the ADSL
channel in case its Data Path is ATM. This is a bit-map of
possible conditions.
The various bit positions are:
noFailure(0) - This bit position positively
reports that no defect or failure
exists.
noCellDelineation(1) - The link was successfully
initialized, but cell delineation
was never acquired on the
associated ATM data path.
lossOfCellDelineation(2) - Loss of cell delineation on the
associated ATM data path.
In case the channel is not of ATM Data Path the object is set
to '0'.ro Adsl2ChAtmStatus (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.4.1.6 |
hwadslnniChStatusPtmStatusIndicates current state (existing failures) of the ADSL
channel in case its Data Path is PTM. This is a bit-map of
possible conditions.
The various bit positions are:
noFailure(0) - This bit position positively
reports that no defect or failure exists.
outOfSync (1) - Out of synchronization.
In case the channel is not of PTM Data Path the object is set
to '0'.ro Adsl2ChPtmStatus (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.4.1.7 |
hwadslnniChStatusINPThe actual impulse noise protection (INP) on
the bearer channel in L0 state.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.1.4.1.8 |
hwadslnniChStatusRSRedundancyThe actual number of Reed-Solomon redundancy
bytes per codeword used in the latency path
in which the bearer channel is transported.
The value is coded in bytes.
Range: 0-16.
The value 0 indicates no Reed-Solomon coding.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.1.4.1.9 |
hwadslnniChStatusRSSymbolsThe DMT Symbol number per codeword used in
the latency path in which the bearer channel
is transported.ro Unsigned32 UNITS "0.01 DMT symbol" .1.3.6.1.4.1.2011.6.143.1.1.4.1.10 |
hwadslnniChStatusInterDepthThe actual Reed-Solomon codeword size used
in the latency path in which the bearer channel
is transported.
The value ranges from 1 to 4096 by step of 1.
The value 1 indicates no interleaving.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.1.4.1.11 |
hwadslnniChStatusSymbolLengthThe actual number of bits per symbol assigned
to the latency path in which the bearer channel
is transported.
This value does not include trellis overhead.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.1.4.1.12 |
hwadslnniChStatusRSSizeThe actual Reed-Solomon codeword size used
in the latency path in which the bearer channel
is transported.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.1.4.1.13 |
hwAdslnniSCStatusTableThe table hwadslnniSCStatusTable contains status parameters
of the ADSL2 sub-carriers.
The indexes of this table are ifIndex and hwAdslnniSCStatusDirection. SEQUENCE OF HwAdslnniSCStatusEntry .1.3.6.1.4.1.2011.6.143.1.1.5 |
hwAdslnniSCStatusEntryThe table hwadslnniSCStatusTable contains status parameters
of the ADSL2 sub-carriers.
The indexes of this entry are ifIndex and hwAdslnniSCStatusDirection. HwAdslnniSCStatusEntry .1.3.6.1.4.1.2011.6.143.1.1.5.1 |
hwAdslnniSCStatusDirectionThe direction of the sub-carrier is either upstream or downstream. Adsl2Direction (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.5.1.1 |
hwadslnniSCStatusSnrThe SNR Margin per sub-carrier, expressing the ratio between
the received signal power and received noise power per
subscriber. It is an array of 512 octets, designed for
supporting up to 512 (downstream) sub-carriers.
The number of utilized octets on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred here as NSC.
Octet i (0 <= i < NSC) is set to a value in the range 0 to
254 to indicate that the respective downstream or upstream sub-
carrier i has SNR of: (-32 + Adsl2SubcarrierSnr(i)/2) in dB
(i.e., -32 to 95dB).
The special value 255 means that no measurement could be done
for the subcarrier because it is out of the PSD mask passband
or that the noise PSD is out of range to be represented.
Each value in this array is 8 bits wide.ro OCTET STRING .1.3.6.1.4.1.2011.6.143.1.1.5.1.2 |
hwadslnniSCStatusBitsAllocThe bits allocation per sub-carrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers.
The number of utilized nibbles on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred here as NSC.
Nibble i (0 <= i < NSC) is set to a value in the range 0
to 15 to indicate that the respective downstream or upstream
sub-carrier i has the same amount of bits allocation.ro OCTET STRING .1.3.6.1.4.1.2011.6.143.1.1.5.1.3 |
hwadslnniSCStatusGainAllocThe gain allocation per sub-carrier. An array of 512 16-bits
values, designed for supporting up to 512 (downstream) sub-
carriers.
The number of utilized octets on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred here as NSC.
Value i (0 <= i < NSC) is in the range 0 to 4093 to indicate
that the respective downstream or upstream sub-carrier i has the
same amount of gain value.
The gain value is represented as a multiple of 1/512 on
linear scale. Each value in this array is 16 bits wide and is
stored in big endian format.ro OCTET STRING .1.3.6.1.4.1.2011.6.143.1.1.5.1.4 |
hwadslnniSCStatusTssiThe transmit spectrum shaping (TSSi) breakpoints expressed
as the set of breakpoints exchanged during G.994.1.
Each breakpoint is a pair of values occupying 3 octets with the
following structure:
First 2 octets - Index of the subcarrier used in the context of
the breakpoint.
Third octet - The shaping parameter at the breakpoint.
Subcarrier index is an unsigned number in the range 1 to either
NSCds (downstream direction) or NSCus (upstream direction).
The shaping parameter value is in the range 0 to 127 (units of
-0.5dB). The special value 127 indicates that the subcarrier
is not transmitted.ro Adsl2Tssi (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.1.5.1.5 |
hwAdslnniStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.143.1.2 |
hwAdslnniStatisticsTableThe table hwAdslnniStatisticsTable contains statistics
of the Adsl NNI.
The index of this table is ifIndex. SEQUENCE OF HwAdslnniStatisticsEntry .1.3.6.1.4.1.2011.6.143.1.2.1 |
hwAdslnniStatisticsEntryThe table hwAdslnniStatisticsTable contains statistics
of the Adsl NNI.
The index of this entry is ifIndex. HwAdslnniStatisticsEntry .1.3.6.1.4.1.2011.6.143.1.2.1.1 |
hwAdslnniRxFrameCountThe ADSLNNI port receive OK frames.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.6.143.1.2.1.1.1 |
hwAdslnniRxBytesCountThe ADSLNNI port receive OK bytes.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.2011.6.143.1.2.1.1.2 |
hwAdslnniTxFrameCountThe ADSLNNI port transmit OK frames.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.6.143.1.2.1.1.3 |
hwAdslnniTxBytesCountThe ADSLNNI port transmit OK bytes.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.2011.6.143.1.2.1.1.4 |
hwAdslnniStatisticsClearClear the statistics of ADSL NNI,
Options:
1. resetStat(1) -clear the statisticsrw Enumeration .1.3.6.1.4.1.2011.6.143.1.2.1.1.5 |
hwAdslnniPerStatis OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.143.1.3 |
hwAdslnniPMLine OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.143.1.3.1 |
hwAdslnniPMLineCurrTableThe table hwAdslnniPMLineCurrTable contains current Performance
Monitoring results of ADSL2 lines.
The indexes of this table are ifIndex and hwadslnniPMLCurrUnit. SEQUENCE OF HwAdslnniPMLineCurrEntry .1.3.6.1.4.1.2011.6.143.1.3.1.1 |
hwAdslnniPMLineCurrEntryThe table hwAdslnniPMLineCurrTable contains current Performance
Monitoring results of ADSL2 lines.
The indexes of this entry are ifIndex and hwadslnniPMLCurrUnit. HwAdslnniPMLineCurrEntry .1.3.6.1.4.1.2011.6.143.1.3.1.1.1 |
hwadslnniPMLCurrUnitThe termination unit atuc(1) or atur(2). Adsl2Unit (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.3.1.1.1.1 |
hwadslnniPMLCurrValidIntervalsValid intervals.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.3.1.1.1.2 |
hwadslnniPMLCurrInvalidIntervalsInvalid intervals.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.3.1.1.1.3 |
hwadslnniPMLCurr15MTimeElapsedTotal elapsed seconds since this PM interval began.
Note that the PM counters are not reset even when the XTU
is reinitialized. They are reinitialized only when the
agent itself is reset or reinitialized.ro HCPerfTimeElapsed UNITS "seconds" .1.3.6.1.4.1.2011.6.143.1.3.1.1.1.4 |
hwadslnniPMLCurr15MFecsCount of seconds during this interval where there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.2011.6.143.1.3.1.1.1.5 |
hwadslnniPMLCurr15MEsCount of seconds during this interval where there was:
ATU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >=1 OR LPR >= 1
ATU-R: FEBE >= 1 for one or more bearer channels OR
LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 .
This parameter is inhibited during UAS.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.2011.6.143.1.3.1.1.1.6 |
hwadslnniPMLCurr15MSesCount of seconds during this interval where there was:
ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
ATU-R: (FEBE summed over all bearer channels) >= 18 OR
LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 .
This parameter is inhibited during UAS.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.2011.6.143.1.3.1.1.1.7 |
hwadslnniPMLCurr15MLossCount of seconds during this interval where there was LOS (or
LOS-FE for ATU-R).ro Counter32 UNITS "seconds" .1.3.6.1.4.1.2011.6.143.1.3.1.1.1.8 |
hwadslnniPMLCurr15MUasCount of seconds in Unavailability State during this
interval. Unavailability begins at the onset of 10
contiguous severely-errored seconds, and ends at the
onset of 10 contiguous seconds with no severely-errored
seconds.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.2011.6.143.1.3.1.1.1.9 |
hwAdslnniPMLineCurrInitTableThe table hwAdslnniPMLineCurrInitTable contains current
initialization counters of the ADSL2 line.
The index of this table consists of an interface index, where
the interface has an ifType of adslnni, and a termination unit.
The index of this table is ifIndex. SEQUENCE OF HwAdslnniPMLineCurrInitEntry .1.3.6.1.4.1.2011.6.143.1.3.1.2 |
hwAdslnniPMLineCurrInitEntryThe table hwAdslnniPMLineCurrInitTable contains current
initialization counters of the ADSL2 line.
The index of this table consists of an interface index, where
the interface has an ifType of adslnni, and a termination unit.
The index of this entry is ifIndex. HwAdslnniPMLineCurrInitEntry .1.3.6.1.4.1.2011.6.143.1.3.1.2.1 |
hwAdslnniPMLCurrInit15MTimeElapsedTotal elapsed seconds since this PM interval began.
Note that the PM counters are not reset even when the XTU
is reinitialized. They are reinitialized only when the
agent itself is reset or reinitialized.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2011.6.143.1.3.1.2.1.1 |
hwAdslnniPMLCurrInit15MFullInitsCount of full initializations attempted on the line
(successful and failed) during this interval.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.3.1.2.1.2 |
hwAdslnniPMLCurrInit15MFailedFullInitsCount of failed full initializations on the line during this
interval.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.3.1.2.1.3 |
hwAdslnniPMLCurrInit15MShortInitsCount of short initializations attempted on the line
(successful and failed) during this interval.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.3.1.2.1.4 |
hwAdslnniPMLCurrInit15MFailedShortInitsCount of failed short initializations on the line during this
interval.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.3.1.2.1.5 |
hwAdslnniPMChannel OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.143.1.3.2 |
hwAdslnniPMChCurrTableThe table hwadslnniPMChCurrTable contains current Performance
Monitoring results of the ADSL2 channel.
The indexes of this table are ifIndex and hwadslnniPMChCurrUnit. SEQUENCE OF HwAdslnniPMChCurrEntry .1.3.6.1.4.1.2011.6.143.1.3.2.1 |
hwAdslnniPMChCurrEntryThe table hwadslnniPMChCurrTable contains current Performance
Monitoring results of the ADSL2 channel.
The indexes of this entry are ifIndex and hwadslnniPMChCurrUnit. HwAdslnniPMChCurrEntry .1.3.6.1.4.1.2011.6.143.1.3.2.1.1 |
hwadslnniPMChCurrUnitThe termination unit. Adsl2Unit (ADSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.143.1.3.2.1.1.1 |
hwadslnniPMChCurrValidIntervalsValid intervals.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.3.2.1.1.2 |
hwadslnniPMChCurrInvalidIntervalsInvalid intervals.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.3.2.1.1.3 |
hwadslnniPMChCurr15MTimeElapsedTotal elapsed seconds since this PM interval began.
Note that the PM counters are not reset even when the XTU
is reinitialized. They are reinitialized only when the
agent itself is reset or reinitialized.ro HCPerfTimeElapsed UNITS "seconds" .1.3.6.1.4.1.2011.6.143.1.3.2.1.1.4 |
hwadslnniPMChCurr15MCodingViolationsCount of CRC-8 (FEBE for ATU-R) anomalies occurring in the
channel during the interval. This parameter is inhibited
during UAS or SES. If the CRC is applied over multiple
channels, then each related CRC-8 (or FEBE) anomaly should
increment each of the counters related to the individual
channels.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.3.2.1.1.5 |
hwadslnniPMChCurr15MCorrectedBlocksCount of FEC (FFEC for ATU-R) anomalies (corrected code words)
occurring in the channel during the interval. This parameter
is inhibited during UAS or SES. If the FEC is applied over
multiple channels, then each related FEC (or FFEC) anomaly
should increment each of the counters related to the
individual channels.ro Unsigned32 .1.3.6.1.4.1.2011.6.143.1.3.2.1.1.6 |